0.000000] timer_usec_ticks = 7864 [ 0.000000] timer tcon=00500000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 [ 0.005000] Console: colour dummy device 80x30 [ 0.005000] console [tty0] enabled [ 0.010000] console [ttySAC2] enabled [ 0.015000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.020000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.020000] ... MAX_LOCK_DEPTH: 30 [ 0.025000] ... MAX_LOCKDEP_KEYS: 2048 [ 0.030000] ... CLASSHASH_SIZE: 1024 [ 0.035000] ... MAX_LOCKDEP_ENTRIES: 8192 [ 0.040000] ... MAX_LOCKDEP_CHAINS: 16384 [ 0.045000] ... CHAINHASH_SIZE: 8192 [ 0.050000] memory used by lock dependency info: 1024 kB [ 0.055000] per task-struct memory footprint: 1920 bytes [ 0.060000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.065000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.095000] Memory: 128MB = 128MB total [ 0.095000] Memory: 123648KB available (3492K code, 2552K data, 128K init) [ 0.100000] Calibrating delay loop... 198.65 BogoMIPS (lpj=496640) [ 0.200000] Mount-cache hash table entries: 512 [ 0.205000] CPU: Testing write buffer coherency: ok [ 0.215000] net_namespace: 80 bytes [ 0.230000] NET: Registered protocol family 16 [ 0.580000] S3C2410 Power Management, (c) 2004 Simtec Electronics [ 0.580000] modem wakeup interrupt [ 0.585000] wake enabled for irq 17 [ 0.585000] wake enabled for irq 49 [ 0.590000] S3C2442: Initialising architecture [ 0.595000] S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics [ 0.600000] DMA channel 0 at c8800000, irq 33 [ 0.605000] DMA channel 1 at c8800040, irq 34 [ 0.610000] DMA channel 2 at c8800080, irq 35 [ 0.615000] DMA channel 3 at c88000c0, irq 36 [ 0.620000] S3C2442: Clock Support, DVS off [ 0.680000] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.690000] usbcore: registered new interface driver usbfs [ 0.695000] usbcore: registered new interface driver hub [ 0.700000] usbcore: registered new device driver usb [ 0.735000] Bluetooth: Core ver 2.11 [ 0.740000] NET: Registered protocol family 31 [ 0.740000] Bluetooth: HCI device and connection manager initialized [ 0.745000] Bluetooth: HCI socket layer initialized [ 0.750000] pnp: the driver 'system' has been registered [ 0.775000] NET: Registered protocol family 2 [ 0.820000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.825000] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.830000] TCP bind hash table entries: 4096 (order: 5, 147456 bytes) [ 0.835000] TCP: Hash tables configured (established 4096 bind 4096) [ 0.840000] TCP reno registered [ 0.865000] s3c24xx_pwm s3c24xx_pwm.0: s3c24xx_pwm is registered [ 0.870000] Enabling FIQ using irq 29 [ 0.870000] not changing prescaler of PWM 3, since it's shared with timer4 (clock tick) [ 0.875000] NetWinder Floating Point Emulator V0.97 (double precision) [ 0.880000] neo1973-version neo1973-version.0: starting [ 0.885000] neo1973-pm-host neo1973-pm-host.0: starting [ 0.895000] neo1973-resume neo1973-resume.0: starting [ 0.900000] neo1973-memconfig neo1973-memconfig.0: starting [ 0.915000] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.920000] io scheduler noop registered [ 0.920000] io scheduler deadline registered (default) [ 0.965000] s3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440 [ 0.970000] s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440 [ 0.980000] s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440 [ 1.015000] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize [ 1.030000] glamo3362 glamo3362.0: Detected Glamo core 3650 Revision 0002 (49119232Hz CPU / 81887232Hz Memory) [ 1.075000] glamo3362 glamo3362.0: Glamo core now 49119232Hz CPU / 81887232Hz Memory) [ 1.075000] Detected S-Media IRQ# pullup, enabling interrupt [ 1.180000] glamo-spi-gpio glamo-spi-gpio.0: registering c039bb50: jbt6k74 [ 1.210000] SMEDIA Glamo frame buffer driver (C) 2007 Openmoko, Inc. [ 1.820000] Console: switching to colour frame buffer device 80x58 [ 1.915000] fb0: SMedia Glamo frame buffer device [ 1.925000] glamo-mci glamo-mci.0: glamo_mci driver (C)2007 Openmoko, Inc [ 1.925000] glamo-mci glamo-mci.0: probe: mapped mci_base:c8864400 irq:0. [ 1.930000] glamo-mci glamo-mci.0: glamo_mci_set_ios: power down. [ 1.935000] glamo-mci glamo-mci.0: initialisation done. [ 1.940000] mmc_set_power(power_mode=1, vdd=20 [ 1.950000] physmap platform flash device: 00200000 at 18000000 [ 1.950000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank [ 1.955000] Intel/Sharp Extended Query Table at 0x0039 [ 1.965000] Intel/Sharp Extended Query Table at 0x0039 [ 1.970000] Intel/Sharp Extended Query Table at 0x0039 [ 1.975000] Intel/Sharp Extended Query Table at 0x0039 [ 1.980000] Intel/Sharp Extended Query Table at 0x0039 [ 1.985000] cfi_cmdset_0001: Erase suspend on write enabled [ 1.990000] erase region 0: offset=0x0,size=0x2000,blocks=8 [ 1.995000] erase region 1: offset=0x10000,size=0x10000,blocks=31 [ 2.000000] physmap-flash.0: 1 set(s) of 1 interleaved chips --> 4 partitions of 512 KiB [ 2.005000] RedBoot partition parsing not available [ 2.015000] S3C24XX NAND Driver, (c) 2004 Simtec Electronics [ 2.020000] s3c2440-nand s3c2440-nand: Tacls=3, 30ns Twrph0=7 70ns, Twrph1=3 30ns [ 2.025000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xaa (Samsung NAND 256MiB 1,8V 8-bit) [ 2.030000] s3c2410_nand_update_chip: chip c7d4d8b8: 11 [ 2.040000] Bad block table found at page 131008, version 0x01 [ 2.045000] Bad block table found at page 130944, version 0x01 [ 2.050000] nand_read_bbt: Bad block at 0x00900000 [ 2.055000] 6 cmdlinepart partitions found on MTD device neo1973-nand [ 2.060000] Creating 6 MTD partitions on "neo1973-nand": [ 2.065000] 0x00000000-0x00040000 : "u-boot" [ 2.075000] 0x00040000-0x00080000 : "u-boot_env" [ 2.085000] 0x00080000-0x00880000 : "kernel" [ 2.095000] 0x00880000-0x00940000 : "splash" [ 2.105000] 0x00940000-0x00980000 : "factory" [ 2.115000] 0x00980000-0x10000000 : "rootfs" [ 2.135000] spi_s3c24xx_gpio spi_s3c24xx_gpio.1: registering c039bacc: lis302dl [ 2.140000] spi_s3c24xx_gpio spi_s3c24xx_gpio.1: registering c039baf8: lis302dl [ 2.150000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.160000] s3c2410-ohci s3c2410-ohci: S3C24XX OHCI [ 2.170000] s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1 [ 2.175000] s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000 [ 2.245000] usb usb1: configuration #1 chosen from 1 choice [ 2.250000] hub 1-0:1.0: USB hub found [ 2.255000] hub 1-0:1.0: 2 ports detected [ 2.370000] usbcore: registered new interface driver libusual [ 2.380000] usbcore: registered new interface driver usbserial [ 2.385000] drivers/usb/serial/usb-serial.c: USB Serial support registered for generic [ 2.390000] usbcore: registered new interface driver usbserial_generic [ 2.395000] drivers/usb/serial/usb-serial.c: USB Serial Driver core [ 2.405000] drivers/usb/serial/usb-serial.c: USB Serial support registered for GSM modem (1-port) [ 2.410000] usbcore: registered new interface driver option [ 2.415000] drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1 [ 2.435000] s3c2440-usbgadget s3c2440-usbgadget: S3C2440: increasing FIFO to 128 bytes [ 2.440000] gta02_udc_command(2) [ 2.445000] ether gadget: using random self ethernet address [ 2.450000] ether gadget: using random host ethernet address [ 2.460000] usb0: Ethernet Gadget, version: May Day 2005 [ 2.465000] usb0: using s3c2410_udc, OUT ep2-bulk IN ep1-bulk STATUS ep3-bulk [ 2.470000] usb0: MAC b6:18:55:04:53:14 [ 2.475000] usb0: HOST MAC 22:3f:4f:d0:8e:cb [ 2.480000] usb0: RNDIS ready [ 2.485000] gta02_udc_command(1) [ 2.490000] mice: PS/2 mouse device common for all mice [ 2.500000] input: Neo1973 Buttons as /devices/platform/neo1973-button.0/input/input0 [ 2.535000] wake enabled for irq 48 [ 2.550000] s3c2440-ts s3c2440-ts: successfully loaded [ 2.560000] input: s3c2410 TouchScreen as /devices/virtual/input/input1 [ 2.590000] input: lis302-1 (top) as /devices/virtual/input/input2 [ 2.615000] lis302dl spi0.0: Found lis302-1 (top) [ 2.625000] input: lis302-2 (bottom) as /devices/virtual/input/input3 [ 2.655000] lis302dl spi0.1: Found lis302-2 (bottom) [ 2.660000] i2c /dev entries driver [ 2.670000] s3c2440-i2c s3c2440-i2c: slave address 0x10 [ 2.675000] s3c2440-i2c s3c2440-i2c: bus frequency set to 390 KHz [ 2.685000] s3c2440-i2c s3c2440-i2c: i2c-0: S3C I2C adapter [ 2.715000] input: GTA02 PMU events as /devices/platform/s3c2440-i2c/i2c-adapter/i2c-0/0-0073/input/input4 [ 2.725000] SD power -> 3200mV [ 2.770000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 0kHz div=255 (req: 0kHz). Bus width=0 [ 2.775000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 [ 2.785000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 [ 2.790000] glamo-mci glamo-mci.0: powered (vdd = 20) clk: 195kHz div=255 (req: 195kHz). Bus width=0 [ 2.795000] glamo-mci glamo-mci.0: Error after cmd: 0x120 [ 2.800000] glamo-mci glamo-mci.0: Error after cmd: 0x8120 [ 2.805000] glamo-mci glamo-mci.0: Error after cmd: 0x120 [ 2.810000] glamo-mci glamo-mci.0: Error after cmd: 0x8120 [ 2.815000] glamo-mci glamo-mci.0: Error after cmd: 0x120 [ 2.820000] glamo-mci glamo-mci.0: Error after cmd: 0x8120 [ 2.825000] glamo-mci glamo-mci.0: Error after cmd: 0x120 [ 2.835000] glamo-mci glamo-mci.0: Error after cmd: 0x8120 [ 2.840000] glamo-mci glamo-mci.0: Error after cmd: 0x120 [ 2.845000] glamo-mci glamo-mci.0: Error after cmd: 0x8120 [ 2.850000] mmc_set_power(power_mode=0, vdd=0 [ 2.870000] wake enabled for irq 53 [ 2.880000] pcf50633: dev (254:0) [ 2.885000] pcf50633 0-0073: rtc core: registered pcf50633 as rtc0 [ 2.910000] glamo-mci glamo-mci.0: glamo_mci_set_ios: power down. [ 3.035000] neo1973-pm-bt neo1973-pm-bt.0: FIC Neo1973 Bluetooth Power Management: starting [ 3.275000] neo1973-pm-gps neo1973-pm-gps.0: FIC Neo1973 GPS Power Managerment:starting [ 3.285000] APM Battery Driver [ 3.295000] bq27000-battery bq27000-battery.0: BQ27000 Battery Driver (C) 2008 Openmoko, Inc [ 3.300000] power_supply bat: uevent [ 3.305000] power_supply bat: No power supply yet [ 3.310000] power_supply bat: power_supply_changed [ 3.315000] power_supply bat: power_supply_changed_work [ 3.320000] power_supply bat: uevent [ 3.325000] power_supply bat: POWER_SUPPLY_NAME=bat [ 3.330000] power_supply bat: Static prop TYPE=Battery [ 3.335000] power_supply bat: 11 dynamic props [ 3.340000] power_supply bat: driver failed to report `status' property [ 3.350000] Bluetooth: HCI USB driver ver 2.9 [ 3.355000] usbcore: registered new interface driver hci_usb [ 3.365000] S3c2440 SDIO Host controller [ 3.470000] pnp: the driver 'sdio_s3c24xx_hcd' has been registered [ 3.480000] mapped channel 0 to 0 [ 3.490000] S3c24xx SDIO: IRQ:37 Detect IRQ:0 DMA channel:0 base@0xc9c00000 PCLK@50000 kHz [ 3.500000] sdio_s3c24xx_hcd 00:00: driver attached [ 3.505000] sdio_s3c24xx_hcd 00:00: SDIO device, IDs SD_0008 (active) [ 3.515000] pnp: the driver 'sdio_wlan' has been registered [ 3.530000] Registered led device: neo1973:vibrator [ 3.540000] Registered led device: gta02-power:orange [ 3.545000] Registered led device: gta02-power:blue [ 3.555000] Registered led device: gta02-aux:red [ 3.560000] usbcore: registered new interface driver usbhid [ 3.565000] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 3.575000] Advanced Linux Sound Architecture Driver Version 1.0.15 (Tue Nov 20 19:16:42 2007 UTC). [ 3.585000] ASoC version 0.13.1 [ 3.590000] Only GTA01 hardware supported by ASoc driver [ 3.600000] wm8753: WM8753 Audio Codec 0.16 [ 3.630000] asoc: WM8753 HiFi <-> s3c24xx-i2s mapping ok [ 3.635000] asoc: WM8753 Voice <-> Bluetooth mapping ok [ 3.835000] ALSA device list: [ 3.840000] #0: neo1973-gta02 (WM8753) [ 3.850000] TCP cubic registered [ 3.855000] NET: Registered protocol family 1 [ 3.860000] NET: Registered protocol family 17 [ 3.865000] Bridge firewalling registered [ 3.870000] Bluetooth: L2CAP ver 2.9 [ 3.875000] Bluetooth: L2CAP socket layer initialized [ 3.880000] Bluetooth: SCO (Voice Link) ver 0.5 [ 3.885000] Bluetooth: SCO socket layer initialized [ 3.890000] Bluetooth: RFCOMM socket layer initialized [ 3.895000] Bluetooth: RFCOMM TTY layer initialized [ 3.900000] Bluetooth: RFCOMM ver 1.8 [ 3.905000] Bluetooth: BNEP (Ethernet Emulation) ver 1.2 [ 3.910000] Bluetooth: BNEP filters: protocol multicast [ 3.915000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.110000] pcf50633 0-0073: setting system clock to 2000-02-01 00:02:13 UTC (949363333) [ 5.830000] Empty flash at 0x04b1e134 ends at 0x04b1e800 [ 7.360000] Empty flash at 0x0ce98944 ends at 0x0ce99000 [ 8.100000] CRCFAIL 0x1a3f [ 8.505000] CRCFAIL 0x1a3f [ 8.520000] VFS: Mounted root (jffs2 filesystem). [ 8.520000] CRCFAIL 0x1a3f [ 8.525000] Freeing init memory: 128K [ 8.635000] sdio_wlan 00:01: driver attached [ 8.640000] sdio_wlan 00:01: SDIO device, IDs SD_0001 (active) [ 9.930000] BMI Get Target Info: Exit (ver: 0x20000059 type: 0x1) [ 10.010000] SDIO_INT_CTRL enable IRQ [ 10.020000] AR6000 Reg Code = 0x40000060 [ 10.995000] PM: Removing info for No Bus:vcs1 [ 11.005000] PM: Removing info for No Bus:vcsa1 [ 11.015000] PM: Removing info for No Bus:vcs1 [ 11.020000] PM: Removing info for No Bus:vcsa1 [ 11.900000] PM: Removing info for No Bus:vcs1 [ 11.905000] PM: Removing info for No Bus:vcsa1 [ 11.920000] PM: Removing info for No Bus:vcs1 [ 11.930000] PM: Removing info for No Bus:vcsa1 [ 11.990000] PM: Removing info for No Bus:vcs1 [ 11.995000] PM: Removing info for No Bus:vcsa1 [ 22.890000] power_supply bat: uevent [ 22.890000] power_supply bat: POWER_SUPPLY_NAME=bat [ 22.890000] power_supply bat: Static prop TYPE=Battery [ 22.970000] power_supply bat: 11 dynamic props [ 22.970000] power_supply bat: prop STATUS=Discharging [ 22.985000] power_supply bat: driver failed to report `voltage_now' property [ 45.715000] NET: Registered protocol family 10 [ 50.350000] ADDRCONF(NETDEV_UP): usb0: link is not ready [ 89.470000] modem wakeup interrupt [ 135.055000] power_supply bat: uevent [ 135.060000] power_supply bat: POWER_SUPPLY_NAME=bat [ 135.065000] power_supply bat: Static prop TYPE=Battery [ 135.075000] power_supply bat: 11 dynamic props [ 135.075000] power_supply bat: prop STATUS=Discharging [ 135.090000] power_supply bat: driver failed to report `voltage_now' property [ 172.145000] usb0: full speed config #1: 500 mA, Ethernet Gadget, using CDC Ethernet [ 172.560000] ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready [ 183.310000] usb0: no IPv6 routers present [ 197.205000] JFFS2 notice: (1032) check_node_data: wrong data CRC in data node at 0x04b1dfac: read 0x28a49228, calculated 0x3c36e09e.