Thank you. It worked. The problem is that the illume configuration is still very buggy.... <br><br>CQ<br><br>----- Original Message -----<br>From: Marc Rios &lt;marcrios84@gmail.com&gt;<br>Date: Wednesday, December 31, 2008 1:35 am<br>Subject: Re: A little lost<br>To: Support for Openmoko Device Owners &lt;support@lists.openmoko.org&gt;<br><br>&gt; Hi CQ5ITC,<br>&gt; <br>&gt; To get the illume profile the only changes I have made are the <br>&gt; keyboard sets<br>&gt; and change the profile. To change the keyboard:<br>&gt; <br>&gt; opkg install illume-config<br>&gt; <br>&gt; #Turn off built-in qtopia keyboard<br>&gt; #Add/modify "export QTOPIA_NO_VIRTUAL_KEYBOARD=1" in<br>&gt; /etc/X11/Xsession.d/89qtopia<br>&gt; <br>&gt; opkg install illume-config-illume<br>&gt; <br>&gt; #Purge E's cache<br>&gt; rm -rf ~/.e/e/config/illume<br>&gt; <br>&gt; #Restart X<br>&gt; /etc/init.d/xserver-nodm restart<br>&gt; <br>&gt; And to active the profile you have to change 'asu' by illume in<br>&gt; /etc/enlightment/default_profile:<br>&gt; <br>&gt; E_PROFILE="-profile illume"<br>&gt; <br>&gt; With this it should work in 2008.12.<br>&gt; <br>&gt; On Wed, Dec 31, 2008 at 3:50 AM, CQIT Consulting <br>&gt; &lt;CQ5ITC@shaw.ca&gt; wrote:<br>&gt; <br>&gt; &gt; See below:<br>&gt; &gt;<br>&gt; &gt; ----- Original Message -----<br>&gt; &gt; From: Marc Rios &lt;marcrios84@gmail.com&gt;<br>&gt; &gt; Date: Tuesday, December 30, 2008 10:38 am<br>&gt; &gt; Subject: Re: A little lost<br>&gt; &gt; To: Support for Openmoko Device Owners <br>&gt; &lt;support@lists.openmoko.org&gt;&gt;<br>&gt; &gt; &gt; Thanks for the anser CQ5ITC ;)<br>&gt; &gt; &gt;<br>&gt; &gt; &gt; Now I see it :S<br>&gt; &gt; &gt;<br>&gt; &gt; &gt; The Operating system by default in 2008.12 isn't qtopia?? What<br>&gt; &gt; &gt; is qtopia in<br>&gt; &gt; &gt; that case?<br>&gt; &gt;<br>&gt; &gt; You can load a different distribution of the OS (Operating <br>&gt; System) for the<br>&gt; &gt; FR from<br>&gt; &gt; Qtopia. In my opinion the Qtopia front-end is more <br>&gt; sophisticated and<br>&gt; &gt; appealing but it is not as "open" as the ASU or OM2008.12. <br>&gt; (More difficult<br>&gt; &gt; to develop stuff there? not sure).<br>&gt; &gt; My understanding is that some parts of the OM2008 software is <br>&gt; from Qtopia<br>&gt; &gt; (I think tha the dialler interface is an example). I have the Qtopia<br>&gt; &gt; distribution on my 8GB sd card and OM2008.12 on the phone <br>&gt; itself. This<br>&gt; &gt; allows me to always have a way to use the phone just in case I load<br>&gt; &gt; some software that breaks the stability either one of the two <br>&gt; distributions.&gt; You can boot from the SD card.<br>&gt; &gt;<br>&gt; &gt; &gt;<br>&gt; &gt; &gt; I have illume profile because in asu profile I don't like the<br>&gt; &gt; &gt; keyboard so<br>&gt; &gt; &gt; with ilume I can change it and its better. I had read that in<br>&gt; &gt; &gt; the settings<br>&gt; &gt; &gt; should be an item named 'Wireless' o 'Wifi' but I don't see it,<br>&gt; &gt; &gt; is it<br>&gt; &gt; &gt; something I have don't wrong?<br>&gt; &gt; I seem to remember that the Wifi option in the Settings has <br>&gt; been removed<br>&gt; &gt; as it was not working well. I think that the alternative is to load<br>&gt; &gt; somthing like<br>&gt; &gt; Mofi or other wireless software from the om2008 <br>&gt; distribution.... I haven't<br>&gt; &gt; had the time<br>&gt; &gt; to solve that myself either.<br>&gt; &gt;<br>&gt; &gt; Regarding the Illume profile you are in better shape than me <br>&gt; as I can't get<br>&gt; &gt; it<br>&gt; &gt; to show on my FR. By the way, I would really appreciate help <br>&gt; on this<br>&gt; &gt; subject myself<br>&gt; &gt; as I have tried to get the illume to show up to no avail.<br>&gt; &gt;<br>&gt; &gt; &gt;<br>&gt; &gt; &gt; Thanks for all.<br>&gt; &gt; &gt;<br>&gt; &gt; &gt; On Tue, Dec 30, 2008 at 6:56 PM, CQIT Consulting<br>&gt; &gt; &gt; &lt;CQ5ITC@shaw.ca&gt; wrote:<br>&gt; &gt; &gt;<br>&gt; &gt; &gt; &gt; I don't know if you have already had an answer to this... but<br>&gt; &gt; &gt; here you<br>&gt; &gt; &gt; &gt; go.... (see below)<br>&gt; &gt; &gt; &gt;<br>&gt; &gt; &gt; &gt; ----- Original Message -----<br>&gt; &gt; &gt; &gt; From: Marc Rios &lt;marcrios84@gmail.com&gt;<br>&gt; &gt; &gt; &gt; Date: Monday, December 29, 2008 7:21 am<br>&gt; &gt; &gt; &gt; Subject: A little lost<br>&gt; &gt; &gt; &gt; To: support@lists.openmoko.org<br>&gt; &gt; &gt; &gt;<br>&gt; &gt; &gt; &gt; &gt; Hi to everbody,<br>&gt; &gt; &gt; &gt; &gt;<br>&gt; &gt; &gt; &gt; &gt; I have nearly iniciate my trip with neofreerunner and <br>&gt; there are<br>&gt; &gt; &gt; &gt; &gt; some things<br>&gt; &gt; &gt; &gt; &gt; I don't understand.<br>&gt; &gt; &gt; &gt; &gt;<br>&gt; &gt; &gt; &gt; &gt; Basicaly, I have read that a volume bar has been updated in<br>&gt; &gt; &gt; &gt; &gt; 2008.12, but<br>&gt; &gt; &gt; &gt; &gt; when I'm phonening I don't see any bar...<br>&gt; &gt; &gt; &gt;<br>&gt; &gt; &gt; &gt; The bar appears while you are speaking (the volume doesn't<br>&gt; &gt; &gt; appear until the<br>&gt; &gt; &gt; &gt; person on the other side has answered). This is not the best<br>&gt; &gt; &gt; behaviour, but<br>&gt; &gt; &gt; &gt; that's how it works. In Qtopia you can change the default<br>&gt; &gt; &gt; volume of the call<br>&gt; &gt; &gt; &gt; as a profile setting. And of course you have another way to<br>&gt; &gt; &gt; change the<br>&gt; &gt; &gt; &gt; default volue in OM2008.9 (I assume here it is still valid in<br>&gt; &gt; &gt; 2008.12) which<br>&gt; &gt; &gt; &gt; is the alsamixer ....<br>&gt; &gt; &gt; &gt;<br>&gt; &gt; &gt; &gt; &gt;<br>&gt; &gt; &gt; &gt; &gt; Another thing I don't understand is why there are two<br>&gt; &gt; &gt; &gt; &gt; applications for<br>&gt; &gt; &gt; &gt; &gt; 'contacts', firstly, the 2007.2 app which doesn't <br>&gt; consult the<br>&gt; &gt; &gt; &gt; &gt; SIM, and the<br>&gt; &gt; &gt; &gt; &gt; other one that consults the SIM's contacts but doesn't <br>&gt; let me<br>&gt; &gt; &gt; &gt; &gt; search....<br>&gt; &gt; &gt; &gt; I flashed my FR with 2008.12 and the "Contacts" application<br>&gt; &gt; &gt; works well<br>&gt; &gt; &gt; &gt; enough. It displays the contacts from the SIM but you have the<br>&gt; &gt; &gt; option of<br>&gt; &gt; &gt; &gt; showing from, "Contacts", "Active SIM Card" and "SIM Card<br>&gt; &gt; &gt; Service Numbers".<br>&gt; &gt; &gt; &gt; It doesn't allow for "search" though, but this may be due to<br>&gt; &gt; &gt; the fact that I<br>&gt; &gt; &gt; &gt; haven't been able to get the "Illume" wrench showing....<br>&gt; &gt; &gt; &gt;<br>&gt; &gt; &gt; &gt; &gt;<br>&gt; &gt; &gt; &gt; &gt; Can anybody helps me?<br>&gt; &gt; &gt; &gt; &gt;<br>&gt; &gt; &gt; &gt; &gt; Thanks<br>&gt; &gt; &gt; &gt; &gt;<br>&gt; &gt; &gt; &gt;<br>&gt; &gt; &gt; &gt; _______________________________________________<br>&gt; &gt; &gt; &gt; support mailing list<br>&gt; &gt; &gt; &gt; support@lists.openmoko.org<br>&gt; &gt; &gt; &gt; https://lists.openmoko.org/mailman/listinfo/support<br>&gt; &gt; &gt; &gt;<br>&gt; &gt; &gt; &gt;<br>&gt; &gt; &gt;<br>&gt; &gt;<br>&gt; &gt; _______________________________________________<br>&gt; &gt; support mailing list<br>&gt; &gt; support@lists.openmoko.org<br>&gt; &gt; https://lists.openmoko.org/mailman/listinfo/support<br>&gt; &gt;<br>&gt; &gt;<br>&gt;