Hello,<br><br>I'm currently working on a bootloader for the neo
freerunner. I can't get gdb completely working so I'm looking for
another way to debug. However I do have a Lauterbach. When I connect
the Lauterbach to the 20pin JTAG connector on the debug board (v3) I
cannot power on the freerunner. When I connect an usb adapter to power
the debug device, the freerunner will power on. I can attach the device
with Trace32 but when it tries to bring up the system it gives some
error messages like: "emulation reset detected". I used a Trace32 file
that I downloaded from the Samsung website to do the basic init of the
s3c2442 so that shouldn't be the problem.<br>
<br>Now I'm not sure if it's possible to use the debug board to connect
a Lauterbach. It seems like the pins are connected correctly and I
don't think that an external power source should be connected.<br><br>
So my question is: Is there someone out there that got a Lauterbach
working in combination with the debug board? Or is there someone that
can tell me if it's possible to use a Lauterbach in combination with a
debug board.<br>
<br>Thanks<br><br>Justin