[Bug 1086] White pixel "noise" corrupts display dynamically after some boots

bugzilla-daemon at bugzilla.openmoko.org bugzilla-daemon at bugzilla.openmoko.org
Wed Dec 12 18:29:13 CET 2007


------- Additional Comments From andy at openmoko.com  2007-12-12 18:29 -------
Created an attachment (id=433)
 --> (http://bugzilla.openmoko.org/cgi-bin/bugzilla/attachment.cgi?id=433&action=view)
Workaround for failed video init

Should work around the failed video init of register 0x40 that is seen
sometimes.  Wrong value (0x0000) in register 0x40 means PLL1 cannot lock; the
VCO issues the lowest frequency of 1.7MHz and the LOCK bit is clear.  After
performing the init, this patch checks that both PLLs are in fact in lock, if
either or both are not, it repeats the init.  Since only register 0x40 is
affected it seems to be some timing issue to do with the GPU and CPU access to
the register.

------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.

More information about the buglog mailing list