[Bug 806] Standby voltage set to 2.1V, not 1.8V as datasheet says.

[bugzilla-daemon at bugzilla.openmoko.org]

http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=806





------- Additional Comments From laforge at openmoko.org  2008-01-09 20:13 -------
I'm sorry.  IT is correct.  All publicly released GTA01 revisions have a 266MHz
CPU.   Depending on the CPU clock, the voltage has to vary.

VDDi is specified at 2.0V +/- 0.1V at 266MHz
VDDi is specified at 1.8V +/- 0.15V at 200MHz

since the PMU can only be tuned in 200mV steps, 2.0V is not an option, but we
have to use 2.1V.

Cheers,



------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.