r1068 - developers/werner
werner at sita.openmoko.org
werner at sita.openmoko.org
Wed Feb 21 04:00:45 CET 2007
Author: werner
Date: 2007-02-21 04:00:42 +0100 (Wed, 21 Feb 2007)
New Revision: 1068
Modified:
developers/werner/TODO
Log:
Feb 20 updates
Modified: developers/werner/TODO
===================================================================
--- developers/werner/TODO 2007-02-21 02:52:39 UTC (rev 1067)
+++ developers/werner/TODO 2007-02-21 03:00:42 UTC (rev 1068)
@@ -1,8 +1,8 @@
IRC/neo-devel:
- kick off bad block migration with all other phase -1 developers
-neo-devel:
-- phase 0 default environment draft
+planning/design:
+- phase 0 default environment draft (neo-devel)
Mickey:
- ask for quick walk-through review
@@ -13,9 +13,7 @@
bugzilla:
P0
- #79: suspend/resume to RAM support
- - #14: bootloader should display startup image before booting
(as early as possible, i.e., even before LCM is up)
- - #40: test + debug display of image on LCM in u-boot
- #178: u-boot 'factory reset' option
P1
- #164: improve non-SanDisk microSD support in u-boot
@@ -23,29 +21,32 @@
other:
- test V-360 headset
+- set up automated build tests on buildhost-old
+ - check: does default build yield old or new sjf ? if new, update
+ Building_OpenMoko_from_scratch#Flash_boot_loader_into_NAND
+- once SVN opens, check that build passes without prompting for certificates or
+ authentication. then update Building_OpenMoko_from_scratch#OpenEmbedded_build
+- local: make fs ("lab") boot into Gentoo directly
+
+u-boot:
- set up openocd and familiarize with it (-> update wiki)
- u-boot: start.S: boot from RAM with relocation
-- GTA01Bv2 # dynenv set u-boot_env
- 45 4e 56 30 - 00 00 00 00
- *OUCH* !
- bbt migration & walk-through: future updates
- update for debug v2
- switch from wiggler to openocd
- all boards will be v3 or later, so mention battery in
Building_OpenMoko_from_scratch#Start_the_Neo_and_enter_the_boot_prompt
- u-boot: fix weird "product name" after "mmc[init]"
-- set up automated build tests on buildhost-old
- - check: does default build yield old or new sjf ? if new, update
- Building_OpenMoko_from_scratch#Flash_boot_loader_into_NAND
- write "intelligent" serial/USB console tool
-- once SVN opens, check that build passes without prompting for certificates or
- authentication. then update Building_OpenMoko_from_scratch#OpenEmbedded_build
- u-boot: make fatload behave like ext2load (hex output, ${filesize})
-- connect charger when off -> show battery gauge
+- idea: connect charger when off -> show battery gauge
- check and report IMEI
https://wiki.internal.openmoko.org/wiki/Bluetooth_MAC_Assignments
-- buy and try battery
-- u-boot NAND update also removes environment offset. document or fix this ?
+- u-boot NAND update also removes environment offset. Documented it. Fix it,
+ too ?
+- nice to have: make u-boot detect at run-time if it's booting from RAM or NAND
+- check that we don't have hidden power-on sequences (e.g., USB disconnect)
+- board/neo1973/neo1973.c: start LCD first, to avoid white flash
--- Feb 13 --------------------------------------------------------------------
@@ -53,7 +54,7 @@
- check (non-)use of BB_COLLECTIONS (do I have to care ?) [mickey says it's ok]
- check walk-through exceptions [mickey says keep them]
- put shipping instructions on Wiki
-- complete bad block migration
+- complete bad block migration (mickey)
--- Feb 14 --------------------------------------------------------------------
@@ -72,3 +73,14 @@
- bbt migration & walk-through: clone and merge
- nand flashing: do gradual erases (env, kernel, etc.), use partition names
and ${filesize}
+- buy and try battery
+
+(Not much happened for a while, 'cause some flu bug had other plans for me.)
+
+--- Feb 20 --------------------------------------------------------------------
+
+ - #14: bootloader should display startup image before booting
+ - #40: test + debug display of image on LCM in u-boot
+- GTA01Bv2 # dynenv set u-boot_env
+ 45 4e 56 30 - 00 00 00 00
+ *OUCH* !
More information about the commitlog
mailing list