r2105 - in trunk/oe/packages/uboot: . files
laforge at sita.openmoko.org
laforge at sita.openmoko.org
Thu May 31 00:10:25 CEST 2007
Author: laforge
Date: 2007-05-31 00:10:24 +0200 (Thu, 31 May 2007)
New Revision: 2105
Removed:
trunk/oe/packages/uboot/files/arm_flags.patch
trunk/oe/packages/uboot/files/gta01_nand.h
trunk/oe/packages/uboot/files/qt2410.h
trunk/oe/packages/uboot/files/qt2410_nand.h
trunk/oe/packages/uboot/files/qt2410_ram.h
trunk/oe/packages/uboot/files/u-boot-20060807-qt2410.patch
trunk/oe/packages/uboot/files/u-boot-20060807.tar.bz2
trunk/oe/packages/uboot/files/u-boot-20060907-gta01.patch
trunk/oe/packages/uboot/files/u-boot-20060907.tar.bz2
trunk/oe/packages/uboot/files/u-boot-20061030-ext2load_hex.patch
trunk/oe/packages/uboot/files/u-boot-20061030-gta01bv2.patch
trunk/oe/packages/uboot/files/u-boot-20061030-gta01v4.patch
trunk/oe/packages/uboot/files/u-boot-20061030-qt2410-gta01.patch
trunk/oe/packages/uboot/uboot-qt2410_0.0+cvs20061030.bb
Log:
remove outdated, obsolete qt2410 uboot recipe plus associated old uboot files
Deleted: trunk/oe/packages/uboot/files/arm_flags.patch
===================================================================
--- trunk/oe/packages/uboot/files/arm_flags.patch 2007-05-30 16:20:53 UTC (rev 2104)
+++ trunk/oe/packages/uboot/files/arm_flags.patch 2007-05-30 22:10:24 UTC (rev 2105)
@@ -1,13 +0,0 @@
-Index: u-boot/cpu/pxa/config.mk
-===================================================================
---- u-boot.orig/cpu/pxa/config.mk 2005-01-09 16:28:17.000000000 -0500
-+++ u-boot/cpu/pxa/config.mk 2005-02-25 16:38:23.789788636 -0500
-@@ -23,7 +23,7 @@
- #
-
- PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \
-- -mshort-load-bytes -msoft-float
-+ -msoft-float
-
- #PLATFORM_CPPFLAGS += -mapcs-32 -march=armv4 -mtune=strongarm1100
- PLATFORM_CPPFLAGS += -mapcs-32 -march=armv5 -mtune=xscale
Deleted: trunk/oe/packages/uboot/files/gta01_nand.h
===================================================================
--- trunk/oe/packages/uboot/files/gta01_nand.h 2007-05-30 16:20:53 UTC (rev 2104)
+++ trunk/oe/packages/uboot/files/gta01_nand.h 2007-05-30 22:10:24 UTC (rev 2105)
@@ -1,233 +0,0 @@
-/*
- * (C) Copyright 2006 Harald Welte <hwelte at hmw-consulting.de>
- *
- * Configuation settings for the FIC GTA01 Linux GSM phone
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* we want to start u-boot directly from within NAND flash */
-#define CONFIG_S3C2410_NAND_BOOT 1
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */
-#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */
-
-/* input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ 12000000/* the GTA01 has 12MHz input clock */
-
-
-#define USE_920T_MMU 1
-#define CONFIG_USE_IRQ 1
-
-/*
- * Size of malloc() pool
- */
-#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-
-/*
- * Hardware drivers
- */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on GTA01 */
-//#define CONFIG_HWFLOW 1
-
-/************************************************************
- * RTC
- ************************************************************/
-#define CONFIG_RTC_S3C24X0 1
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-/***********************************************************
- * Command definition
- ***********************************************************/
-#define CONFIG_COMMANDS (\
- CFG_CMD_BDI | \
- CFG_CMD_LOADS | \
- CFG_CMD_LAODB | \
- CFG_CMD_IMI | \
- CFG_CMD_CACHE | \
- CFG_CMD_MEMORY | \
- CFG_CMD_ENV | \
- /* CFG_CMD_IRQ | */ \
- CFG_CMD_BOOTD | \
- CFG_CMD_CONSOLE | \
- CFG_CMD_ASKENV | \
- CFG_CMD_RUN | \
- CFG_CMD_ECHO | \
- CFG_CMD_I2C | \
- CFG_CMD_REGINFO | \
- CFG_CMD_IMMAP | \
- CFG_CMD_DATE | \
- CFG_CMD_AUTOSCRIPT | \
- CFG_CMD_BSP | \
- CFG_CMD_ELF | \
- CFG_CMD_MISC | \
- CFG_CMD_USB | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_DIAG | \
- /* CFG_CMD_HWFLOW | */ \
- CFG_CMD_SAVES | \
- CFG_CMD_NAND | \
- CFG_CMD_PORTIO | \
- CFG_CMD_MMC | \
- CFG_CMD_FAT | \
- CFG_CMD_EXT2 | \
- 0)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8"
-/*#define CONFIG_BOOTFILE "elinos-lart" */
-#define CONFIG_BOOTCOMMAND "nand load 0x32000000 0x34000 0x200000; bootm 0x32000000"
-
-#define CONFIG_DOS_PARTITION 1
-
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "GTA01 # " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-
-#define CFG_MEMTEST_START 0x30000000 /* memtest works on */
-#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */
-
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
-#define CFG_LOAD_ADDR 0x33000000 /* default load address */
-
-/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
-/* it to wrap 100 times (total 1562500) to get 1 sec. */
-#define CFG_HZ 1562500
-
-/* valid baudrates */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-#define CONFIG_USB_OHCI 1
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-#if 1
-#define CFG_NO_FLASH 1
-#else
-#define CFG_MAX_FLASH_SECT 1
-#define CFG_MAX_FLASH_BANKS 1
-#endif
-
-#define CFG_ENV_IS_IN_NAND 1
-#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */
-#define CFG_ENV_OFFSET 0x30000 /* environment after bootloader */
-
-#define NAND_MAX_CHIPS 1
-#define CFG_NAND_BASE 0x4e000000
-#define CFG_MAX_NAND_DEVICE 1
-
-#define CONFIG_MMC 1
-#define CFG_MMC_BASE 0xff000000
-
-/* EXT2 driver */
-#define CONFIG_EXT2 1
-
-/* FAT driver in u-boot is broken currently */
-#define CONFIG_FAT 1
-#define CONFIG_SUPPORT_VFAT 1
-
-/* JFFS2 driver */
-#define CONFIG_JFFS2_NAND 1
-#define CONFIG_JFFS2_NAND_DEV 0
-#define CONFIG_JFFS2_NAND_OFF 0x634000
-#define CONFIG_JFFS2_NAND_SIZE 0x39cc000
-
-/* ATAG configuration */
-#define CONFIG_INITRD_TAG 1
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_CMDLINE_TAG 1
-#if 0
-#define CONFIG_SERIAL_TAG 1
-#define CONFIG_REVISION_TAG 1
-#endif
-
-#define CONFIG_DRIVER_S3C24X0_I2C 1
-#define CONFIG_HARD_I2C 1
-#define CFG_I2C_SPEED 400000 /* 400kHz according to PCF50707 data sheet */
-#define CFG_I2C_SLAVE 0x7f
-
-
-#if 0
-#define CONFIG_VIDEO
-#define CONFIG_VIDEO_S3C2410
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-
-#define VIDEO_KBD_INIT_FCT 0
-#define VIDEO_TSTC_FCT serial_tstc
-#define VIDEO_GETC_FCT serial_getc
-
-#define LCD_VIDEO_ADDR 0x33d00000
-#endif
-
-#endif /* __CONFIG_H */
Deleted: trunk/oe/packages/uboot/files/qt2410.h
===================================================================
--- trunk/oe/packages/uboot/files/qt2410.h 2007-05-30 16:20:53 UTC (rev 2104)
+++ trunk/oe/packages/uboot/files/qt2410.h 2007-05-30 22:10:24 UTC (rev 2105)
@@ -1,256 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger at sysgo.de>
- * Gary Jennejohn <gj at denx.de>
- * David Mueller <d.mueller at elsoft.ch>
- *
- * Configuation settings for the SAMSUNG SMDK2410 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#if 0
-/* If we want to start u-boot from usb bootloader in NOR flash */
-#define CONFIG_SKIP_RELOCATE_UBOOT 1
-#define CONFIG_SKIP_LOWLEVEL_INIT 1
-#else
-/* If we want to start u-boot directly from within NAND flash */
-#define CONFIG_S3C2410_NAND_BOOT 1
-#endif
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */
-#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */
-
-/* input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ 12000000/* the SMDK2410 has 12MHz input clock */
-
-
-#define USE_920T_MMU 1
-#define CONFIG_USE_IRQ 1
-//#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-/*
- * Size of malloc() pool
- */
-#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-
-/*
- * Hardware drivers
- */
-#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */
-#define CS8900_BASE 0x19000300
-#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2410 */
-#define CONFIG_HWFLOW 1
-
-/************************************************************
- * RTC
- ************************************************************/
-#define CONFIG_RTC_S3C24X0 1
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-/***********************************************************
- * Command definition
- ***********************************************************/
-#define CONFIG_COMMANDS \
- (CONFIG_CMD_DFL | \
- CFG_CMD_BSP | \
- CFG_CMD_CACHE | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_ELF | \
- CFG_CMD_EXT2 | \
- CFG_CMD_FAT | \
- CFG_CMD_HWFLOW | \
- /* CFG_CMD_IDE | */ \
- /* CFG_CMD_IRQ | */ \
- CFG_CMD_JFFS2 | \
- CFG_CMD_MMC | \
- CFG_CMD_NAND | \
- CFG_CMD_PING | \
- CFG_CMD_PORTIO | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SAVES | \
- CFG_CMD_USB)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "root=/dev/sda1 console=ttySAC0,115200 loglevel=8 rootdelay=10"
-/*#define CONFIG_ETHADDR 08:00:3e:26:0a:5b */
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 10.0.0.110
-#define CONFIG_SERVERIP 10.0.0.1
-/*#define CONFIG_BOOTFILE "elinos-lart" */
-#define CONFIG_BOOTCOMMAND "mmcinit; ext2load mmc 0 0x32000000 uImage; bootm 0x32000000"
-
-#define CONFIG_DOS_PARTITION 1
-
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "QT2410 # " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-
-#define CFG_MEMTEST_START 0x30000000 /* memtest works on */
-#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */
-
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
-#define CFG_LOAD_ADDR 0x33000000 /* default load address */
-
-/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
-/* it to wrap 100 times (total 1562500) to get 1 sec. */
-#define CFG_HZ 1562500
-
-/* valid baudrates */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/* IDE/ATA config */
-
-#if 0
-#define CFG_IDE_MAXBUS 1
-#define CFG_IDE_MAXDEVICE 2
-#define CFG_IDE_PREINIT 0
-
-#define CFG_ATA_BASE_ADDR
-#endif
-
-#define CONFIG_USB_OHCI 1
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-
-#define CFG_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */
-#if 0
-#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */
-#endif
-
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#ifdef CONFIG_AMD_LV800
-#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */
-#define CFG_MAX_FLASH_SECT (19) /* max number of sectors on one chip */
-#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x0F0000) /* addr of environment */
-#endif
-#ifdef CONFIG_AMD_LV400
-#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */
-#define CFG_MAX_FLASH_SECT (11) /* max number of sectors on one chip */
-#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x070000) /* addr of environment */
-#endif
-
-/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */
-
-#define CFG_ENV_IS_IN_NAND 1
-#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */
-#define CFG_ENV_OFFSET 0x30000 /* environment after bootloader */
-
-#define NAND_MAX_CHIPS 1
-#define CFG_NAND_BASE 0x4e000000
-#define CFG_MAX_NAND_DEVICE 1
-
-#define CONFIG_MMC 1
-#define CFG_MMC_BASE 0xff000000
-
-#define CONFIG_EXT2 1
-
-/* FAT driver in u-boot is broken currently */
-#define CONFIG_FAT 1
-#define CONFIG_SUPPORT_VFAT
-
-/* ATAG configuration */
-#define CONFIG_INITRD_TAG 1
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_CMDLINE_TAG 1
-#if 0
-#define CONFIG_SERIAL_TAG 1
-#define CONFIG_REVISION_TAG 1
-#endif
-
-
-#if 0
-#define CONFIG_VIDEO
-#define CONFIG_VIDEO_S3C2410
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-
-#define VIDEO_KBD_INIT_FCT 0
-#define VIDEO_TSTC_FCT serial_tstc
-#define VIDEO_GETC_FCT serial_getc
-
-#define LCD_VIDEO_ADDR 0x33d00000
-#endif
-
-#endif /* __CONFIG_H */
Deleted: trunk/oe/packages/uboot/files/qt2410_nand.h
===================================================================
--- trunk/oe/packages/uboot/files/qt2410_nand.h 2007-05-30 16:20:53 UTC (rev 2104)
+++ trunk/oe/packages/uboot/files/qt2410_nand.h 2007-05-30 22:10:24 UTC (rev 2105)
@@ -1,256 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger at sysgo.de>
- * Gary Jennejohn <gj at denx.de>
- * David Mueller <d.mueller at elsoft.ch>
- *
- * Configuation settings for the SAMSUNG SMDK2410 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#if 0
-/* If we want to start u-boot from usb bootloader in NOR flash */
-#define CONFIG_SKIP_RELOCATE_UBOOT 1
-#define CONFIG_SKIP_LOWLEVEL_INIT 1
-#else
-/* If we want to start u-boot directly from within NAND flash */
-#define CONFIG_S3C2410_NAND_BOOT 1
-#endif
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */
-#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */
-
-/* input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ 12000000/* the SMDK2410 has 12MHz input clock */
-
-
-#define USE_920T_MMU 1
-#define CONFIG_USE_IRQ 1
-//#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-/*
- * Size of malloc() pool
- */
-#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-
-/*
- * Hardware drivers
- */
-#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */
-#define CS8900_BASE 0x19000300
-#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2410 */
-#define CONFIG_HWFLOW 1
-
-/************************************************************
- * RTC
- ************************************************************/
-#define CONFIG_RTC_S3C24X0 1
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-/***********************************************************
- * Command definition
- ***********************************************************/
-#define CONFIG_COMMANDS \
- (CONFIG_CMD_DFL | \
- CFG_CMD_BSP | \
- CFG_CMD_CACHE | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_ELF | \
- CFG_CMD_EXT2 | \
- CFG_CMD_FAT | \
- CFG_CMD_HWFLOW | \
- /* CFG_CMD_IDE | */ \
- /* CFG_CMD_IRQ | */ \
- CFG_CMD_JFFS2 | \
- CFG_CMD_MMC | \
- CFG_CMD_NAND | \
- CFG_CMD_PING | \
- CFG_CMD_PORTIO | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SAVES | \
- CFG_CMD_USB)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "root=/dev/sda1 console=ttySAC0,115200 loglevel=8 rootdelay=10"
-/*#define CONFIG_ETHADDR 08:00:3e:26:0a:5b */
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 10.0.0.110
-#define CONFIG_SERVERIP 10.0.0.1
-/*#define CONFIG_BOOTFILE "elinos-lart" */
-#define CONFIG_BOOTCOMMAND "mmcinit; ext2load mmc 0 0x32000000 uImage; bootm 0x32000000"
-
-#define CONFIG_DOS_PARTITION 1
-
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "QT2410 # " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-
-#define CFG_MEMTEST_START 0x30000000 /* memtest works on */
-#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */
-
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
-#define CFG_LOAD_ADDR 0x33000000 /* default load address */
-
-/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
-/* it to wrap 100 times (total 1562500) to get 1 sec. */
-#define CFG_HZ 1562500
-
-/* valid baudrates */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/* IDE/ATA config */
-
-#if 0
-#define CFG_IDE_MAXBUS 1
-#define CFG_IDE_MAXDEVICE 2
-#define CFG_IDE_PREINIT 0
-
-#define CFG_ATA_BASE_ADDR
-#endif
-
-#define CONFIG_USB_OHCI 1
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-
-#define CFG_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */
-#if 0
-#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */
-#endif
-
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#ifdef CONFIG_AMD_LV800
-#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */
-#define CFG_MAX_FLASH_SECT (19) /* max number of sectors on one chip */
-#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x0F0000) /* addr of environment */
-#endif
-#ifdef CONFIG_AMD_LV400
-#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */
-#define CFG_MAX_FLASH_SECT (11) /* max number of sectors on one chip */
-#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x070000) /* addr of environment */
-#endif
-
-/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */
-
-#define CFG_ENV_IS_IN_NAND 1
-#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */
-#define CFG_ENV_OFFSET 0x30000 /* environment after bootloader */
-
-#define NAND_MAX_CHIPS 1
-#define CFG_NAND_BASE 0x4e000000
-#define CFG_MAX_NAND_DEVICE 1
-
-#define CONFIG_MMC 1
-#define CFG_MMC_BASE 0xff000000
-
-#define CONFIG_EXT2 1
-
-/* FAT driver in u-boot is broken currently */
-#define CONFIG_FAT 1
-#define CONFIG_SUPPORT_VFAT
-
-/* ATAG configuration */
-#define CONFIG_INITRD_TAG 1
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_CMDLINE_TAG 1
-#if 0
-#define CONFIG_SERIAL_TAG 1
-#define CONFIG_REVISION_TAG 1
-#endif
-
-
-#if 0
-#define CONFIG_VIDEO
-#define CONFIG_VIDEO_S3C2410
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-
-#define VIDEO_KBD_INIT_FCT 0
-#define VIDEO_TSTC_FCT serial_tstc
-#define VIDEO_GETC_FCT serial_getc
-
-#define LCD_VIDEO_ADDR 0x33d00000
-#endif
-
-#endif /* __CONFIG_H */
Deleted: trunk/oe/packages/uboot/files/qt2410_ram.h
===================================================================
--- trunk/oe/packages/uboot/files/qt2410_ram.h 2007-05-30 16:20:53 UTC (rev 2104)
+++ trunk/oe/packages/uboot/files/qt2410_ram.h 2007-05-30 22:10:24 UTC (rev 2105)
@@ -1,256 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger at sysgo.de>
- * Gary Jennejohn <gj at denx.de>
- * David Mueller <d.mueller at elsoft.ch>
- *
- * Configuation settings for the SAMSUNG SMDK2410 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#if 1
-/* If we want to start u-boot from usb bootloader in NOR flash */
-#define CONFIG_SKIP_RELOCATE_UBOOT 1
-#define CONFIG_SKIP_LOWLEVEL_INIT 1
-#else
-/* If we want to start u-boot directly from within NAND flash */
-#define CONFIG_S3C2410_NAND_BOOT 1
-#endif
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */
-#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */
-
-/* input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ 12000000/* the SMDK2410 has 12MHz input clock */
-
-
-#define USE_920T_MMU 1
-#define CONFIG_USE_IRQ 1
-//#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-/*
- * Size of malloc() pool
- */
-#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
-#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-
-/*
- * Hardware drivers
- */
-#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */
-#define CS8900_BASE 0x19000300
-#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2410 */
-#define CONFIG_HWFLOW 1
-
-/************************************************************
- * RTC
- ************************************************************/
-#define CONFIG_RTC_S3C24X0 1
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-/***********************************************************
- * Command definition
- ***********************************************************/
-#define CONFIG_COMMANDS \
- (CONFIG_CMD_DFL | \
- CFG_CMD_BSP | \
- CFG_CMD_CACHE | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_ELF | \
- CFG_CMD_EXT2 | \
- CFG_CMD_FAT | \
- CFG_CMD_HWFLOW | \
- /* CFG_CMD_IDE | */ \
- /* CFG_CMD_IRQ | */ \
- CFG_CMD_JFFS2 | \
- CFG_CMD_MMC | \
- CFG_CMD_NAND | \
- CFG_CMD_PING | \
- CFG_CMD_PORTIO | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SAVES | \
- CFG_CMD_USB)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "root=/dev/sda1 console=ttySAC0,115200 loglevel=8 rootdelay=10"
-/*#define CONFIG_ETHADDR 08:00:3e:26:0a:5b */
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 10.0.0.110
-#define CONFIG_SERVERIP 10.0.0.1
-/*#define CONFIG_BOOTFILE "elinos-lart" */
-#define CONFIG_BOOTCOMMAND "mmcinit; ext2load mmc 0 0x32000000 uImage; bootm 0x32000000"
-
-#define CONFIG_DOS_PARTITION 1
-
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "QT2410 # " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args */
-#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-
-#define CFG_MEMTEST_START 0x30000000 /* memtest works on */
-#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */
-
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
-#define CFG_LOAD_ADDR 0x33000000 /* default load address */
-
-/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
-/* it to wrap 100 times (total 1562500) to get 1 sec. */
-#define CFG_HZ 1562500
-
-/* valid baudrates */
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/* IDE/ATA config */
-
-#if 0
-#define CFG_IDE_MAXBUS 1
-#define CFG_IDE_MAXDEVICE 2
-#define CFG_IDE_PREINIT 0
-
-#define CFG_ATA_BASE_ADDR
-#endif
-
-#define CONFIG_USB_OHCI 1
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-
-#define CFG_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */
-#if 0
-#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */
-#endif
-
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#ifdef CONFIG_AMD_LV800
-#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */
-#define CFG_MAX_FLASH_SECT (19) /* max number of sectors on one chip */
-#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x0F0000) /* addr of environment */
-#endif
-#ifdef CONFIG_AMD_LV400
-#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */
-#define CFG_MAX_FLASH_SECT (11) /* max number of sectors on one chip */
-#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x070000) /* addr of environment */
-#endif
-
-/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */
-
-#define CFG_ENV_IS_IN_NAND 1
-#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */
-#define CFG_ENV_OFFSET 0x30000 /* environment after bootloader */
-
-#define NAND_MAX_CHIPS 1
-#define CFG_NAND_BASE 0x4e000000
-#define CFG_MAX_NAND_DEVICE 1
-
-#define CONFIG_MMC 1
-#define CFG_MMC_BASE 0xff000000
-
-#define CONFIG_EXT2 1
-
-/* FAT driver in u-boot is broken currently */
-#define CONFIG_FAT 1
-#define CONFIG_SUPPORT_VFAT
-
-/* ATAG configuration */
-#define CONFIG_INITRD_TAG 1
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_CMDLINE_TAG 1
-#if 0
-#define CONFIG_SERIAL_TAG 1
-#define CONFIG_REVISION_TAG 1
-#endif
-
-
-#if 0
-#define CONFIG_VIDEO
-#define CONFIG_VIDEO_S3C2410
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-
-#define VIDEO_KBD_INIT_FCT 0
-#define VIDEO_TSTC_FCT serial_tstc
-#define VIDEO_GETC_FCT serial_getc
-
-#define LCD_VIDEO_ADDR 0x33d00000
-#endif
-
-#endif /* __CONFIG_H */
Deleted: trunk/oe/packages/uboot/files/u-boot-20060807-qt2410.patch
===================================================================
--- trunk/oe/packages/uboot/files/u-boot-20060807-qt2410.patch 2007-05-30 16:20:53 UTC (rev 2104)
+++ trunk/oe/packages/uboot/files/u-boot-20060807-qt2410.patch 2007-05-30 22:10:24 UTC (rev 2105)
@@ -1,8435 +0,0 @@
-diff --git a/Makefile b/Makefile
-index 128ae59..5d7b5bb 100644
---- a/Makefile
-+++ b/Makefile
-@@ -1638,6 +1638,9 @@ omap730p2_cs3boot_config : unconfig
- sbc2410x_config: unconfig
- @./mkconfig $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
-
-+qt2410_config : unconfig
-+ @./mkconfig $(@:_config=) arm arm920t qt2410 NULL s3c24x0
-+
- scb9328_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t scb9328 NULL imx
-
-diff --git a/board/qt2410/Makefile b/board/qt2410/Makefile
-new file mode 100644
-index 0000000..407b256
---- /dev/null
-+++ b/board/qt2410/Makefile
-@@ -0,0 +1,47 @@
-+#
-+# (C) Copyright 2000, 2001, 2002
-+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB = lib$(BOARD).a
-+
-+OBJS := qt2410.o flash.o
-+SOBJS := lowlevel_init.o
-+
-+$(LIB): $(OBJS) $(SOBJS)
-+ $(AR) crv $@ $(OBJS) $(SOBJS)
-+
-+clean:
-+ rm -f $(SOBJS) $(OBJS)
-+
-+distclean: clean
-+ rm -f $(LIB) core *.bak .depend
-+
-+#########################################################################
-+
-+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
-+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-+
-+-include .depend
-+
-+#########################################################################
-diff --git a/board/qt2410/config.mk b/board/qt2410/config.mk
-new file mode 100644
-index 0000000..1af85da
---- /dev/null
-+++ b/board/qt2410/config.mk
-@@ -0,0 +1,25 @@
-+#
-+# (C) Copyright 2002
-+# Gary Jennejohn, DENX Software Engineering, <gj at denx.de>
-+# David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
-+#
-+# SAMSUNG SMDK2410 board with S3C2410X (ARM920T) cpu
-+#
-+# see http://www.samsung.com/ for more information on SAMSUNG
-+#
-+
-+#
-+# SMDK2410 has 1 bank of 64 MB DRAM
-+#
-+# 3000'0000 to 3400'0000
-+#
-+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
-+# optionally with a ramdisk at 3080'0000
-+#
-+# we load ourself to 33F8'0000
-+#
-+# download area is 3300'0000
-+#
-+
-+
-+TEXT_BASE = 0x33F80000
-diff --git a/board/qt2410/flash.c b/board/qt2410/flash.c
-new file mode 100644
-index 0000000..993946b
---- /dev/null
-+++ b/board/qt2410/flash.c
-@@ -0,0 +1,433 @@
-+/*
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Alex Zuepke <azu at sysgo.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+
-+ulong myflush (void);
-+
-+
-+#define FLASH_BANK_SIZE PHYS_FLASH_SIZE
-+#define MAIN_SECT_SIZE 0x10000 /* 64 KB */
-+
-+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
-+
-+
-+#define CMD_READ_ARRAY 0x000000F0
-+#define CMD_UNLOCK1 0x000000AA
-+#define CMD_UNLOCK2 0x00000055
-+#define CMD_ERASE_SETUP 0x00000080
-+#define CMD_ERASE_CONFIRM 0x00000030
-+#define CMD_PROGRAM 0x000000A0
-+#define CMD_UNLOCK_BYPASS 0x00000020
-+
-+#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555 << 1)))
-+#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA << 1)))
-+
-+#define BIT_ERASE_DONE 0x00000080
-+#define BIT_RDY_MASK 0x00000080
-+#define BIT_PROGRAM_ERROR 0x00000020
-+#define BIT_TIMEOUT 0x80000000 /* our flag */
-+
-+#define READY 1
-+#define ERR 2
-+#define TMO 4
-+
-+/*-----------------------------------------------------------------------
-+ */
-+
-+ulong flash_init (void)
-+{
-+ int i, j;
-+ ulong size = 0;
-+
-+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
-+ ulong flashbase = 0;
-+
-+ flash_info[i].flash_id =
-+#if defined(CONFIG_AMD_LV400)
-+ (AMD_MANUFACT & FLASH_VENDMASK) |
-+ (AMD_ID_LV400B & FLASH_TYPEMASK);
-+#elif defined(CONFIG_AMD_LV800)
-+ (AMD_MANUFACT & FLASH_VENDMASK) |
-+ (AMD_ID_LV800B & FLASH_TYPEMASK);
-+#else
-+#error "Unknown flash configured"
-+#endif
-+ flash_info[i].size = FLASH_BANK_SIZE;
-+ flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-+ memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
-+ if (i == 0)
-+ flashbase = PHYS_FLASH_1;
-+ else
-+ panic ("configured too many flash banks!\n");
-+ for (j = 0; j < flash_info[i].sector_count; j++) {
-+ if (j <= 3) {
-+ /* 1st one is 16 KB */
-+ if (j == 0) {
-+ flash_info[i].start[j] =
-+ flashbase + 0;
-+ }
-+
-+ /* 2nd and 3rd are both 8 KB */
-+ if ((j == 1) || (j == 2)) {
-+ flash_info[i].start[j] =
-+ flashbase + 0x4000 + (j -
-+ 1) *
-+ 0x2000;
-+ }
-+
-+ /* 4th 32 KB */
-+ if (j == 3) {
-+ flash_info[i].start[j] =
-+ flashbase + 0x8000;
-+ }
-+ } else {
-+ flash_info[i].start[j] =
-+ flashbase + (j - 3) * MAIN_SECT_SIZE;
-+ }
-+ }
-+ size += flash_info[i].size;
-+ }
-+
-+ flash_protect (FLAG_PROTECT_SET,
-+ CFG_FLASH_BASE,
-+ CFG_FLASH_BASE + monitor_flash_len - 1,
-+ &flash_info[0]);
-+
-+ flash_protect (FLAG_PROTECT_SET,
-+ CFG_ENV_ADDR,
-+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
-+
-+ return size;
-+}
-+
-+/*-----------------------------------------------------------------------
-+ */
-+void flash_print_info (flash_info_t * info)
-+{
-+ int i;
-+
-+ switch (info->flash_id & FLASH_VENDMASK) {
-+ case (AMD_MANUFACT & FLASH_VENDMASK):
-+ printf ("AMD: ");
-+ break;
-+ default:
-+ printf ("Unknown Vendor ");
-+ break;
-+ }
-+
-+ switch (info->flash_id & FLASH_TYPEMASK) {
-+ case (AMD_ID_LV400B & FLASH_TYPEMASK):
-+ printf ("1x Amd29LV400BB (4Mbit)\n");
-+ break;
-+ case (AMD_ID_LV800B & FLASH_TYPEMASK):
-+ printf ("1x Amd29LV800BB (8Mbit)\n");
-+ break;
-+ default:
-+ printf ("Unknown Chip Type\n");
-+ goto Done;
-+ break;
-+ }
-+
-+ printf (" Size: %ld MB in %d Sectors\n",
-+ info->size >> 20, info->sector_count);
-+
-+ printf (" Sector Start Addresses:");
-+ for (i = 0; i < info->sector_count; i++) {
-+ if ((i % 5) == 0) {
-+ printf ("\n ");
-+ }
-+ printf (" %08lX%s", info->start[i],
-+ info->protect[i] ? " (RO)" : " ");
-+ }
-+ printf ("\n");
-+
-+ Done:;
-+}
-+
-+/*-----------------------------------------------------------------------
-+ */
-+
-+int flash_erase (flash_info_t * info, int s_first, int s_last)
-+{
-+ ushort result;
-+ int iflag, cflag, prot, sect;
-+ int rc = ERR_OK;
-+ int chip;
-+
-+ /* first look for protection bits */
-+
-+ if (info->flash_id == FLASH_UNKNOWN)
-+ return ERR_UNKNOWN_FLASH_TYPE;
-+
-+ if ((s_first < 0) || (s_first > s_last)) {
-+ return ERR_INVAL;
-+ }
-+
-+ if ((info->flash_id & FLASH_VENDMASK) !=
-+ (AMD_MANUFACT & FLASH_VENDMASK)) {
-+ return ERR_UNKNOWN_FLASH_VENDOR;
-+ }
-+
-+ prot = 0;
-+ for (sect = s_first; sect <= s_last; ++sect) {
-+ if (info->protect[sect]) {
-+ prot++;
-+ }
-+ }
-+ if (prot)
-+ return ERR_PROTECTED;
-+
-+ /*
-+ * Disable interrupts which might cause a timeout
-+ * here. Remember that our exception vectors are
-+ * at address 0 in the flash, and we don't want a
-+ * (ticker) exception to happen while the flash
-+ * chip is in programming mode.
-+ */
-+ cflag = icache_status ();
-+ icache_disable ();
-+ iflag = disable_interrupts ();
-+
-+ /* Start erase on unprotected sectors */
-+ for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
-+ printf ("Erasing sector %2d ... ", sect);
-+
-+ /* arm simple, non interrupt dependent timer */
-+ reset_timer_masked ();
-+
-+ if (info->protect[sect] == 0) { /* not protected */
-+ vu_short *addr = (vu_short *) (info->start[sect]);
-+
-+ MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-+ MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-+ MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-+
-+ MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-+ MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-+ *addr = CMD_ERASE_CONFIRM;
-+
-+ /* wait until flash is ready */
-+ chip = 0;
-+
-+ do {
-+ result = *addr;
-+
-+ /* check timeout */
-+ if (get_timer_masked () >
-+ CFG_FLASH_ERASE_TOUT) {
-+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-+ chip = TMO;
-+ break;
-+ }
-+
-+ if (!chip
-+ && (result & 0xFFFF) & BIT_ERASE_DONE)
-+ chip = READY;
-+
-+ if (!chip
-+ && (result & 0xFFFF) & BIT_PROGRAM_ERROR)
-+ chip = ERR;
-+
-+ } while (!chip);
-+
-+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-+
-+ if (chip == ERR) {
-+ rc = ERR_PROG_ERROR;
-+ goto outahere;
-+ }
-+ if (chip == TMO) {
-+ rc = ERR_TIMOUT;
-+ goto outahere;
-+ }
-+
-+ printf ("ok.\n");
-+ } else { /* it was protected */
-+
-+ printf ("protected!\n");
-+ }
-+ }
-+
-+ if (ctrlc ())
-+ printf ("User Interrupt!\n");
-+
-+ outahere:
-+ /* allow flash to settle - wait 10 ms */
-+ udelay_masked (10000);
-+
-+ if (iflag)
-+ enable_interrupts ();
-+
-+ if (cflag)
-+ icache_enable ();
-+
-+ return rc;
-+}
-+
-+/*-----------------------------------------------------------------------
-+ * Copy memory to flash
-+ */
-+
-+volatile static int write_hword (flash_info_t * info, ulong dest, ushort data)
-+{
-+ vu_short *addr = (vu_short *) dest;
-+ ushort result;
-+ int rc = ERR_OK;
-+ int cflag, iflag;
-+ int chip;
-+
-+ /*
-+ * Check if Flash is (sufficiently) erased
-+ */
-+ result = *addr;
-+ if ((result & data) != data)
-+ return ERR_NOT_ERASED;
-+
-+
-+ /*
-+ * Disable interrupts which might cause a timeout
-+ * here. Remember that our exception vectors are
-+ * at address 0 in the flash, and we don't want a
-+ * (ticker) exception to happen while the flash
-+ * chip is in programming mode.
-+ */
-+ cflag = icache_status ();
-+ icache_disable ();
-+ iflag = disable_interrupts ();
-+
-+ MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-+ MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-+ MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS;
-+ *addr = CMD_PROGRAM;
-+ *addr = data;
-+
-+ /* arm simple, non interrupt dependent timer */
-+ reset_timer_masked ();
-+
-+ /* wait until flash is ready */
-+ chip = 0;
-+ do {
-+ result = *addr;
-+
-+ /* check timeout */
-+ if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
-+ chip = ERR | TMO;
-+ break;
-+ }
-+ if (!chip && ((result & 0x80) == (data & 0x80)))
-+ chip = READY;
-+
-+ if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) {
-+ result = *addr;
-+
-+ if ((result & 0x80) == (data & 0x80))
-+ chip = READY;
-+ else
-+ chip = ERR;
-+ }
-+
-+ } while (!chip);
-+
-+ *addr = CMD_READ_ARRAY;
-+
-+ if (chip == ERR || *addr != data)
-+ rc = ERR_PROG_ERROR;
-+
-+ if (iflag)
-+ enable_interrupts ();
-+
-+ if (cflag)
-+ icache_enable ();
-+
-+ return rc;
-+}
-+
-+/*-----------------------------------------------------------------------
-+ * Copy memory to flash.
-+ */
-+
-+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-+{
-+ ulong cp, wp;
-+ int l;
-+ int i, rc;
-+ ushort data;
-+
-+ wp = (addr & ~1); /* get lower word aligned address */
-+
-+ /*
-+ * handle unaligned start bytes
-+ */
-+ if ((l = addr - wp) != 0) {
-+ data = 0;
-+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
-+ data = (data >> 8) | (*(uchar *) cp << 8);
-+ }
-+ for (; i < 2 && cnt > 0; ++i) {
-+ data = (data >> 8) | (*src++ << 8);
-+ --cnt;
-+ ++cp;
-+ }
-+ for (; cnt == 0 && i < 2; ++i, ++cp) {
-+ data = (data >> 8) | (*(uchar *) cp << 8);
-+ }
-+
-+ if ((rc = write_hword (info, wp, data)) != 0) {
-+ return (rc);
-+ }
-+ wp += 2;
-+ }
-+
-+ /*
-+ * handle word aligned part
-+ */
-+ while (cnt >= 2) {
-+ data = *((vu_short *) src);
-+ if ((rc = write_hword (info, wp, data)) != 0) {
-+ return (rc);
-+ }
-+ src += 2;
-+ wp += 2;
-+ cnt -= 2;
-+ }
-+
-+ if (cnt == 0) {
-+ return ERR_OK;
-+ }
-+
-+ /*
-+ * handle unaligned tail bytes
-+ */
-+ data = 0;
-+ for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
-+ data = (data >> 8) | (*src++ << 8);
-+ --cnt;
-+ }
-+ for (; i < 2; ++i, ++cp) {
-+ data = (data >> 8) | (*(uchar *) cp << 8);
-+ }
-+
-+ return write_hword (info, wp, data);
-+}
-diff --git a/board/qt2410/lowlevel_init.S b/board/qt2410/lowlevel_init.S
-new file mode 100644
-index 0000000..310f2a0
---- /dev/null
-+++ b/board/qt2410/lowlevel_init.S
-@@ -0,0 +1,167 @@
-+/*
-+ * Memory Setup stuff - taken from blob memsetup.S
-+ *
-+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
-+ * Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
-+ *
-+ * Modified for the Samsung SMDK2410 by
-+ * (C) Copyright 2002
-+ * David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+
-+#include <config.h>
-+#include <version.h>
-+
-+
-+/* some parameters for the board */
-+
-+/*
-+ *
-+ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S
-+ *
-+ * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar at sec.samsung.com>
-+ *
-+ */
-+
-+#define BWSCON 0x48000000
-+
-+/* BWSCON */
-+#define DW8 (0x0)
-+#define DW16 (0x1)
-+#define DW32 (0x2)
-+#define WAIT (0x1<<2)
-+#define UBLB (0x1<<3)
-+
-+#define B1_BWSCON (DW32)
-+#define B2_BWSCON (DW16)
-+#define B3_BWSCON (DW16 + WAIT + UBLB)
-+#define B4_BWSCON (DW16)
-+#define B5_BWSCON (DW16)
-+#define B6_BWSCON (DW32)
-+#define B7_BWSCON (DW32)
-+
-+/* BANK0CON */
-+#define B0_Tacs 0x0 /* 0clk */
-+#define B0_Tcos 0x0 /* 0clk */
-+#define B0_Tacc 0x7 /* 14clk */
-+#define B0_Tcoh 0x0 /* 0clk */
-+#define B0_Tah 0x0 /* 0clk */
-+#define B0_Tacp 0x0
-+#define B0_PMC 0x0 /* normal */
-+
-+/* BANK1CON */
-+#define B1_Tacs 0x0 /* 0clk */
-+#define B1_Tcos 0x0 /* 0clk */
-+#define B1_Tacc 0x7 /* 14clk */
-+#define B1_Tcoh 0x0 /* 0clk */
-+#define B1_Tah 0x0 /* 0clk */
-+#define B1_Tacp 0x0
-+#define B1_PMC 0x0
-+
-+#define B2_Tacs 0x0
-+#define B2_Tcos 0x0
-+#define B2_Tacc 0x7
-+#define B2_Tcoh 0x0
-+#define B2_Tah 0x0
-+#define B2_Tacp 0x0
-+#define B2_PMC 0x0
-+
-+#define B3_Tacs 0x0 /* 0clk */
-+#define B3_Tcos 0x3 /* 4clk */
-+#define B3_Tacc 0x7 /* 14clk */
-+#define B3_Tcoh 0x1 /* 1clk */
-+#define B3_Tah 0x0 /* 0clk */
-+#define B3_Tacp 0x3 /* 6clk */
-+#define B3_PMC 0x0 /* normal */
-+
-+#define B4_Tacs 0x0 /* 0clk */
-+#define B4_Tcos 0x0 /* 0clk */
-+#define B4_Tacc 0x7 /* 14clk */
-+#define B4_Tcoh 0x0 /* 0clk */
-+#define B4_Tah 0x0 /* 0clk */
-+#define B4_Tacp 0x0
-+#define B4_PMC 0x0 /* normal */
-+
-+#define B5_Tacs 0x0 /* 0clk */
-+#define B5_Tcos 0x0 /* 0clk */
-+#define B5_Tacc 0x7 /* 14clk */
-+#define B5_Tcoh 0x0 /* 0clk */
-+#define B5_Tah 0x0 /* 0clk */
-+#define B5_Tacp 0x0
-+#define B5_PMC 0x0 /* normal */
-+
-+#define B6_MT 0x3 /* SDRAM */
-+#define B6_Trcd 0x1
-+#define B6_SCAN 0x1 /* 9bit */
-+
-+#define B7_MT 0x3 /* SDRAM */
-+#define B7_Trcd 0x1 /* 3clk */
-+#define B7_SCAN 0x1 /* 9bit */
-+
-+/* REFRESH parameter */
-+#define REFEN 0x1 /* Refresh enable */
-+#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */
-+#define Trp 0x0 /* 2clk */
-+#define Trc 0x3 /* 7clk */
-+#define Tchr 0x2 /* 3clk */
-+#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */
-+/**************************************/
-+
-+_TEXT_BASE:
-+ .word TEXT_BASE
-+
-+.globl lowlevel_init
-+lowlevel_init:
-+ /* memory control configuration */
-+ /* make r0 relative the current location so that it */
-+ /* reads SMRDATA out of FLASH rather than memory ! */
-+ ldr r0, =SMRDATA
-+ ldr r1, _TEXT_BASE
-+ sub r0, r0, r1
-+ ldr r1, =BWSCON /* Bus Width Status Controller */
-+ add r2, r0, #13*4
-+0:
-+ ldr r3, [r0], #4
-+ str r3, [r1], #4
-+ cmp r2, r0
-+ bne 0b
-+
-+ /* everything is fine now */
-+ mov pc, lr
-+
-+ .ltorg
-+/* the literal pools origin */
-+
-+SMRDATA:
-+ .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28))
-+ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))
-+ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))
-+ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))
-+ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))
-+ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))
-+ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))
-+ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
-+ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
-+ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
-+ .word 0x32
-+ .word 0x30
-+ .word 0x30
-diff --git a/board/qt2410/qt2410.c b/board/qt2410/qt2410.c
-new file mode 100644
-index 0000000..133b748
---- /dev/null
-+++ b/board/qt2410/qt2410.c
-@@ -0,0 +1,130 @@
-+/*
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Marius Groeger <mgroeger at sysgo.de>
-+ *
-+ * (C) Copyright 2002
-+ * David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <s3c2410.h>
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+#define FCLK_SPEED 1
-+
-+#if FCLK_SPEED==0 /* Fout = 203MHz, Fin = 12MHz for Audio */
-+#define M_MDIV 0xC3
-+#define M_PDIV 0x4
-+#define M_SDIV 0x1
-+#elif FCLK_SPEED==1 /* Fout = 202.8MHz */
-+#if 0
-+#define M_MDIV 0xA1
-+#define M_PDIV 0x3
-+#define M_SDIV 0x1
-+#else
-+#define M_MDIV 0x5c
-+#define M_PDIV 0x4
-+#define M_SDIV 0x0
-+#endif
-+#endif
-+
-+#define USB_CLOCK 1
-+
-+#if USB_CLOCK==0
-+#define U_M_MDIV 0xA1
-+#define U_M_PDIV 0x3
-+#define U_M_SDIV 0x1
-+#elif USB_CLOCK==1
-+#define U_M_MDIV 0x48
-+#define U_M_PDIV 0x3
-+#define U_M_SDIV 0x2
-+#endif
-+
-+static inline void delay (unsigned long loops)
-+{
-+ __asm__ volatile ("1:\n"
-+ "subs %0, %1, #1\n"
-+ "bne 1b":"=r" (loops):"0" (loops));
-+}
-+
-+/*
-+ * Miscellaneous platform dependent initialisations
-+ */
-+
-+int board_init (void)
-+{
-+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+
-+ /* to reduce PLL lock time, adjust the LOCKTIME register */
-+ clk_power->LOCKTIME = 0xFFFFFF;
-+
-+ /* configure MPLL */
-+ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
-+
-+ /* some delay between MPLL and UPLL */
-+ delay (4000);
-+
-+ /* configure UPLL */
-+ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
-+
-+ /* some delay between MPLL and UPLL */
-+ delay (8000);
-+
-+ /* set up the I/O ports */
-+ gpio->GPACON = 0x007FFFFF;
-+ gpio->GPBCON = 0x00044555;
-+ gpio->GPBUP = 0x000007FF;
-+ gpio->GPCCON = 0xAAAAAAAA;
-+ gpio->GPCUP = 0x0000FFFF;
-+ gpio->GPDCON = 0xAAAAAAAA;
-+ gpio->GPDUP = 0x0000FFFF;
-+ gpio->GPECON = 0xAAAAAAAA;
-+ gpio->GPEUP = 0x0000FFFF;
-+ gpio->GPFCON = 0x000055AA;
-+ gpio->GPFUP = 0x000000FF;
-+ gpio->GPGCON = 0xFF95FFBA;
-+ //gpio->GPGUP = 0x0000FFFF;
-+ gpio->GPGUP = 0x0000AFEF;
-+ gpio->GPHCON = 0x0028FAAA;
-+ gpio->GPHUP = 0x000007FF;
-+
-+ /* arch number of SMDK2410-Board */
-+ gd->bd->bi_arch_number = MACH_TYPE_QT2410;
-+
-+ /* adress of boot parameters */
-+ gd->bd->bi_boot_params = 0x30000100;
-+
-+ icache_enable();
-+ dcache_enable();
-+
-+ return 0;
-+}
-+
-+int dram_init (void)
-+{
-+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-+
-+ return 0;
-+}
-diff --git a/board/qt2410/u-boot.lds b/board/qt2410/u-boot.lds
-new file mode 100644
-index 0000000..f4fbf96
---- /dev/null
-+++ b/board/qt2410/u-boot.lds
-@@ -0,0 +1,57 @@
-+/*
-+ * (C) Copyright 2002
-+ * Gary Jennejohn, DENX Software Engineering, <gj at denx.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
-+OUTPUT_ARCH(arm)
-+ENTRY(_start)
-+SECTIONS
-+{
-+ . = 0x00000000;
-+
-+ . = ALIGN(4);
-+ .text :
-+ {
-+ cpu/arm920t/start.o (.text)
-+ *(.text)
-+ }
-+
-+ . = ALIGN(4);
-+ .rodata : { *(.rodata) }
-+
-+ . = ALIGN(4);
-+ .data : { *(.data) }
-+
-+ . = ALIGN(4);
-+ .got : { *(.got) }
-+
-+ . = .;
-+ __u_boot_cmd_start = .;
-+ .u_boot_cmd : { *(.u_boot_cmd) }
-+ __u_boot_cmd_end = .;
-+
-+ . = ALIGN(4);
-+ __bss_start = .;
-+ .bss : { *(.bss) }
-+ _end = .;
-+}
-diff --git a/cpu/arm920t/s3c24x0/Makefile b/cpu/arm920t/s3c24x0/Makefile
-index af9e4ef..10f33f2 100644
---- a/cpu/arm920t/s3c24x0/Makefile
-+++ b/cpu/arm920t/s3c24x0/Makefile
-@@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk
- LIB = lib$(SOC).a
-
- OBJS = i2c.o interrupts.o serial.o speed.o \
-- usb_ohci.o
-+ usb_ohci.o mmc.o nand_read.o nand.o
-
- all: .depend $(LIB)
-
-diff --git a/cpu/arm920t/s3c24x0/mmc.c b/cpu/arm920t/s3c24x0/mmc.c
-new file mode 100644
-index 0000000..b7057e2
---- /dev/null
-+++ b/cpu/arm920t/s3c24x0/mmc.c
-@@ -0,0 +1,568 @@
-+/*
-+ * u-boot S3C2410 MMC/SD card driver
-+ * (C) Copyright 2006 by Harald Welte <laforge at gnumonks.org>
-+ *
-+ * based on u-boot pxa MMC driver and linux/drivers/mmc/s3c2410mci.c
-+ * (C) 2005-2005 Thomas Kleffel
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <config.h>
-+#include <common.h>
-+#include <mmc.h>
-+#include <asm/errno.h>
-+#include <asm/io.h>
-+#include <s3c2410.h>
-+#include <part.h>
-+
-+#ifdef CONFIG_MMC
-+
-+#define CONFIG_MMC_WIDE
-+
-+//#define MMC_DEBUG
-+
-+#ifdef MMC_DEBUG
-+#ifdef debug
-+#undef debug
-+#endif
-+#define debug printf
-+#endif
-+
-+static S3C2410_SDI *sdi;
-+
-+extern int
-+fat_register_device(block_dev_desc_t *dev_desc, int part_no);
-+
-+static block_dev_desc_t mmc_dev;
-+
-+block_dev_desc_t * mmc_get_dev(int dev)
-+{
-+ return ((block_dev_desc_t *)&mmc_dev);
-+}
-+
-+/*
-+ * FIXME needs to read cid and csd info to determine block size
-+ * and other parameters
-+ */
-+static uchar mmc_buf[MMC_BLOCK_SIZE];
-+static mmc_csd_t mmc_csd;
-+static int mmc_ready = 0;
-+static int wide = 0;
-+
-+
-+#define CMD_F_RESP 0x01
-+#define CMD_F_RESP_LONG 0x02
-+
-+static u_int32_t *
-+/****************************************************/
-+mmc_cmd(ushort cmd, ulong arg, ushort flags)
-+/****************************************************/
-+{
-+ static u_int32_t resp[5];
-+ ulong status;
-+ int i;
-+
-+ u_int32_t ccon, csta;
-+ u_int32_t csta_rdy_bit = S3C2410_SDICMDSTAT_CMDSENT;
-+
-+ memset(resp, 0, sizeof(resp));
-+
-+ debug("mmc_cmd CMD%d arg=0x%08x flags=%x\n", cmd, arg, flags);
-+
-+ sdi->SDICSTA = 0xffffffff;
-+ sdi->SDIDSTA = 0xffffffff;
-+ sdi->SDIFSTA = 0xffffffff;
-+
-+ sdi->SDICARG = arg;
-+
-+ ccon = cmd & S3C2410_SDICMDCON_INDEX;
-+ ccon |= S3C2410_SDICMDCON_SENDERHOST|S3C2410_SDICMDCON_CMDSTART;
-+
-+ if (flags & CMD_F_RESP) {
-+ ccon |= S3C2410_SDICMDCON_WAITRSP;
-+ csta_rdy_bit = S3C2410_SDICMDSTAT_RSPFIN; /* 1 << 9 */
-+ }
-+
-+ if (flags & CMD_F_RESP_LONG)
-+ ccon |= S3C2410_SDICMDCON_LONGRSP;
-+
-+ sdi->SDICCON = ccon;
-+
-+ while (1) {
-+ csta = sdi->SDICSTA;
-+ if (csta & csta_rdy_bit)
-+ break;
-+ if (csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) {
-+ printf("===============> MMC CMD Timeout\n");
-+ sdi->SDICSTA |= S3C2410_SDICMDSTAT_CMDTIMEOUT;
-+ break;
-+ }
-+ }
-+
-+ debug("final MMC CMD status 0x%x\n", csta);
-+
-+ sdi->SDICSTA |= csta_rdy_bit;
-+
-+ if (flags & CMD_F_RESP) {
-+ resp[0] = sdi->SDIRSP0;
-+ resp[1] = sdi->SDIRSP1;
-+ resp[2] = sdi->SDIRSP2;
-+ resp[3] = sdi->SDIRSP3;
-+ }
-+
-+#if 0
-+ for (i=0; i<4; i ++) {
-+ debug("MMC resp[%d] = 0x%08x\n", i, resp[i]);
-+ }
-+#endif
-+
-+ return resp;
-+}
-+
-+#define FIFO_FILL(host) ((host->SDIFSTA & S3C2410_SDIFSTA_COUNTMASK) >> 2)
-+
-+static int
-+/****************************************************/
-+mmc_block_read(uchar *dst, ulong src, ulong len)
-+/****************************************************/
-+{
-+ u_int32_t dcon, fifo;
-+ u_int32_t *dst_u32 = (u_int32_t *)dst;
-+ u_int32_t *resp;
-+
-+ if (len == 0) {
-+ return 0;
-+ }
-+
-+ debug("mmc_block_rd dst %lx src %lx len %d\n", (ulong)dst, src, len);
-+
-+ /* set block len */
-+ resp = mmc_cmd(MMC_CMD_SET_BLOCKLEN, len, CMD_F_RESP);
-+ sdi->SDIBSIZE = len;
-+
-+ //sdi->SDIPRE = 0xff;
-+
-+ /* setup data */
-+ dcon = (len >> 9) & S3C2410_SDIDCON_BLKNUM_MASK;
-+ dcon |= S3C2410_SDIDCON_BLOCKMODE;
-+ dcon |= S3C2410_SDIDCON_RXAFTERCMD|S3C2410_SDIDCON_XFER_RXSTART;
-+ if (wide)
-+ dcon |= S3C2410_SDIDCON_WIDEBUS;
-+ sdi->SDIDCON = dcon;
-+
-+ /* send read command */
-+ resp = mmc_cmd(MMC_CMD_READ_BLOCK, src, CMD_F_RESP);
-+
-+ while (len > 0) {
-+ u_int32_t sdidsta = sdi->SDIDSTA;
-+ fifo = FIFO_FILL(sdi);
-+ if (sdidsta & (S3C2410_SDIDSTA_FIFOFAIL|
-+ S3C2410_SDIDSTA_CRCFAIL|
-+ S3C2410_SDIDSTA_RXCRCFAIL|
-+ S3C2410_SDIDSTA_DATATIMEOUT)) {
-+ printf("mmc_block_read: err SDIDSTA=0x%08x\n", sdidsta);
-+ return -EIO;
-+ }
-+
-+ while (fifo--) {
-+ //debug("dst_u32 = 0x%08x\n", dst_u32);
-+ *(dst_u32++) = sdi->SDIDAT;
-+ if (len >= 4)
-+ len -= 4;
-+ else {
-+ len = 0;
-+ break;
-+ }
-+ }
-+ }
-+
-+#if 1
-+ debug("waiting for SDIDSTA (currently 0x%08x\n", sdi->SDIDSTA);
-+ while (!(sdi->SDIDSTA & (1 << 4))) {}
-+ debug("done waiting for SDIDSTA (currently 0x%08x\n", sdi->SDIDSTA);
-+#endif
-+
-+ sdi->SDIDCON = 0;
-+
-+#if 0
-+ if (!(sdi->SDIDSTA & S3C2410_SDIDSTA_XFERFINISH))
-+ printf("mmc_block_read; transfer not finished!\n");
-+#endif
-+
-+ return 0;
-+}
-+
-+static int
-+/****************************************************/
-+mmc_block_write(ulong dst, uchar *src, int len)
-+/****************************************************/
-+{
-+#if 0
-+ uchar *resp;
-+ ushort argh, argl;
-+ ulong status;
-+
-+ if (len == 0) {
-+ return 0;
-+ }
-+
-+ debug("mmc_block_wr dst %lx src %lx len %d\n", dst, (ulong)src, len);
-+
-+ argh = len >> 16;
-+ argl = len & 0xffff;
-+
-+ /* set block len */
-+ resp = mmc_cmd(MMC_CMD_SET_BLOCKLEN, argh, argl, CMD_F_RESP);
-+
-+ /* send write command */
-+ argh = dst >> 16;
-+ argl = dst & 0xffff;
-+ MMC_STRPCL = MMC_STRPCL_STOP_CLK;
-+ MMC_NOB = 1;
-+ MMC_BLKLEN = len;
-+ resp = mmc_cmd(MMC_CMD_WRITE_BLOCK, dst, CMD_F_RESP,
-+ MMC_CMDAT_R1|MMC_CMDAT_WRITE|MMC_CMDAT_BLOCK|MMC_CMDAT_DATA_EN);
-+
-+ MMC_I_MASK = ~MMC_I_MASK_TXFIFO_WR_REQ;
-+ while (len) {
-+ if (MMC_I_REG & MMC_I_REG_TXFIFO_WR_REQ) {
-+ int i, bytes = min(32,len);
-+
-+ for (i=0; i<bytes; i++) {
-+ MMC_TXFIFO = *src++;
-+ }
-+ if (bytes < 32) {
-+ MMC_PRTBUF = MMC_PRTBUF_BUF_PART_FULL;
-+ }
-+ len -= bytes;
-+ }
-+ status = MMC_STAT;
-+ if (status & MMC_STAT_ERRORS) {
-+ printf("MMC_STAT error %lx\n", status);
-+ return -1;
-+ }
-+ }
-+ MMC_I_MASK = ~MMC_I_MASK_DATA_TRAN_DONE;
-+ while (!(MMC_I_REG & MMC_I_REG_DATA_TRAN_DONE));
-+ MMC_I_MASK = ~MMC_I_MASK_PRG_DONE;
-+ while (!(MMC_I_REG & MMC_I_REG_PRG_DONE));
-+ status = MMC_STAT;
-+ if (status & MMC_STAT_ERRORS) {
-+ printf("MMC_STAT error %lx\n", status);
-+ return -1;
-+ }
-+#endif
-+ return 0;
-+}
-+
-+
-+int
-+/****************************************************/
-+mmc_read(ulong src, uchar *dst, int size)
-+/****************************************************/
-+{
-+ ulong end, part_start, part_end, part_len, aligned_start, aligned_end;
-+ ulong mmc_block_size, mmc_block_address;
-+
-+ if (size == 0) {
-+ return 0;
-+ }
-+
-+ if (!mmc_ready) {
-+ printf("Please initialize the MMC first\n");
-+ return -1;
-+ }
-+
-+ mmc_block_size = MMC_BLOCK_SIZE;
-+ mmc_block_address = ~(mmc_block_size - 1);
-+
-+ src -= CFG_MMC_BASE;
-+ end = src + size;
-+ part_start = ~mmc_block_address & src;
-+ part_end = ~mmc_block_address & end;
-+ aligned_start = mmc_block_address & src;
-+ aligned_end = mmc_block_address & end;
-+
-+ /* all block aligned accesses */
-+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+ if (part_start) {
-+ part_len = mmc_block_size - part_start;
-+ debug("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+ if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < 0) {
-+ return -1;
-+ }
-+ memcpy(dst, mmc_buf+part_start, part_len);
-+ dst += part_len;
-+ src += part_len;
-+ }
-+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+ for (; src < aligned_end; src += mmc_block_size, dst += mmc_block_size) {
-+ debug("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+ if ((mmc_block_read((uchar *)(dst), src, mmc_block_size)) < 0) {
-+ return -1;
-+ }
-+ }
-+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+ if (part_end && src < end) {
-+ debug("pe src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+ if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) {
-+ return -1;
-+ }
-+ memcpy(dst, mmc_buf, part_end);
-+ }
-+ return 0;
-+}
-+
-+int
-+/****************************************************/
-+mmc_write(uchar *src, ulong dst, int size)
-+/****************************************************/
-+{
-+ ulong end, part_start, part_end, part_len, aligned_start, aligned_end;
-+ ulong mmc_block_size, mmc_block_address;
-+
-+ if (size == 0) {
-+ return 0;
-+ }
-+
-+ if (!mmc_ready) {
-+ printf("Please initialize the MMC first\n");
-+ return -1;
-+ }
-+
-+ mmc_block_size = MMC_BLOCK_SIZE;
-+ mmc_block_address = ~(mmc_block_size - 1);
-+
-+ dst -= CFG_MMC_BASE;
-+ end = dst + size;
-+ part_start = ~mmc_block_address & dst;
-+ part_end = ~mmc_block_address & end;
-+ aligned_start = mmc_block_address & dst;
-+ aligned_end = mmc_block_address & end;
-+
-+ /* all block aligned accesses */
-+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+ if (part_start) {
-+ part_len = mmc_block_size - part_start;
-+ debug("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+ (ulong)src, dst, end, part_start, part_end, aligned_start, aligned_end);
-+ if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < 0) {
-+ return -1;
-+ }
-+ memcpy(mmc_buf+part_start, src, part_len);
-+ if ((mmc_block_write(aligned_start, mmc_buf, mmc_block_size)) < 0) {
-+ return -1;
-+ }
-+ dst += part_len;
-+ src += part_len;
-+ }
-+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+ for (; dst < aligned_end; src += mmc_block_size, dst += mmc_block_size) {
-+ debug("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+ if ((mmc_block_write(dst, (uchar *)src, mmc_block_size)) < 0) {
-+ return -1;
-+ }
-+ }
-+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+ if (part_end && dst < end) {
-+ debug("pe src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+ if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) {
-+ return -1;
-+ }
-+ memcpy(mmc_buf, src, part_end);
-+ if ((mmc_block_write(aligned_end, mmc_buf, mmc_block_size)) < 0) {
-+ return -1;
-+ }
-+ }
-+ return 0;
-+}
-+
-+ulong
-+/****************************************************/
-+mmc_bread(int dev_num, ulong blknr, ulong blkcnt, ulong *dst)
-+/****************************************************/
-+{
-+ int mmc_block_size = MMC_BLOCK_SIZE;
-+ ulong src = blknr * mmc_block_size + CFG_MMC_BASE;
-+
-+ mmc_read(src, (uchar *)dst, blkcnt*mmc_block_size);
-+ return blkcnt;
-+}
-+
-+static u_int16_t rca = MMC_DEFAULT_RCA;
-+
-+static u_int32_t mmc_size(const struct mmc_csd *csd)
-+{
-+ u_int32_t block_len, mult, blocknr;
-+
-+ block_len = csd->read_bl_len << 12;
-+ mult = csd->c_size_mult1 << 8;
-+ blocknr = (csd->c_size+1) * mult;
-+
-+ return blocknr * block_len;
-+}
-+
-+int
-+/****************************************************/
-+mmc_init(int verbose)
-+/****************************************************/
-+{
-+ int retries, rc = -ENODEV;
-+ int is_sd = 0;
-+ u_int32_t *resp;
-+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-+
-+ sdi = S3C2410_GetBase_SDI();
-+
-+ debug("mmc_init(PCLK=%u)\n", get_PCLK());
-+
-+ clk_power->CLKCON |= (1 << 9);
-+
-+ /* S3C2410 has some bug that prevents reliable operation at higher speed */
-+ //sdi->SDIPRE = 0x3e; /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */
-+ sdi->SDIPRE = 0x02; /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */
-+ sdi->SDIBSIZE = 512;
-+ sdi->SDIDTIMER = 0xffff;
-+ sdi->SDIIMSK = 0x0;
-+ sdi->SDICON = S3C2410_SDICON_FIFORESET|S3C2440_SDICON_MMCCLOCK;
-+ udelay(125000); /* FIXME: 74 SDCLK cycles */
-+
-+ mmc_csd.c_size = 0;
-+
-+ /* reset */
-+ retries = 10;
-+ resp = mmc_cmd(MMC_CMD_RESET, 0, 0);
-+
-+ printf("trying to detect SD Card...\n");
-+ while (retries--) {
-+ int i;
-+ udelay(100000);
-+ resp = mmc_cmd(55, 0x00000000, CMD_F_RESP);
-+ resp = mmc_cmd(41, 0x00300000, CMD_F_RESP);
-+
-+ if (resp[0] & (1 << 31)) {
-+ is_sd = 1;
-+ break;
-+ }
-+ }
-+
-+ if (retries == 0 && !is_sd) {
-+ retries = 10;
-+ printf("failed to detect SD Card, trying MMC\n");
-+ resp = mmc_cmd(MMC_CMD_SEND_OP_COND, 0x00ffc000, CMD_F_RESP);
-+ while (retries-- && resp && !(resp[4] & 0x80)) {
-+ debug("resp %x %x\n", resp[0], resp[1]);
-+ udelay(50);
-+ resp = mmc_cmd(1, 0x00ffff00, CMD_F_RESP);
-+ }
-+ }
-+
-+ /* try to get card id */
-+ resp = mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, CMD_F_RESP|CMD_F_RESP_LONG);
-+ if (resp) {
-+ /* TODO configure mmc driver depending on card attributes */
-+ mmc_cid_t *cid = (mmc_cid_t *)resp;
-+ if (verbose) {
-+ printf("MMC found. Card desciption is:\n");
-+ printf("Manufacturer ID = %02x%02x%02x\n",
-+ cid->id[0], cid->id[1], cid->id[2]);
-+ printf("HW/FW Revision = %x %x\n",cid->hwrev, cid->fwrev);
-+ cid->hwrev = cid->fwrev = 0; /* null terminate string */
-+ printf("Product Name = %s\n",cid->name);
-+ printf("Serial Number = %02x%02x%02x\n",
-+ cid->sn[0], cid->sn[1], cid->sn[2]);
-+ printf("Month = %d\n",cid->month);
-+ printf("Year = %d\n",1997 + cid->year);
-+ }
-+ /* fill in device description */
-+ mmc_dev.if_type = IF_TYPE_MMC;
-+ mmc_dev.part_type = PART_TYPE_DOS;
-+ mmc_dev.dev = 0;
-+ mmc_dev.lun = 0;
-+ mmc_dev.type = 0;
-+ /* FIXME fill in the correct size (is set to 32MByte) */
-+ mmc_dev.blksz = 512;
-+ mmc_dev.lba = 0x10000;
-+ sprintf(mmc_dev.vendor,"Man %02x%02x%02x Snr %02x%02x%02x",
-+ cid->id[0], cid->id[1], cid->id[2],
-+ cid->sn[0], cid->sn[1], cid->sn[2]);
-+ sprintf(mmc_dev.product,"%s",cid->name);
-+ sprintf(mmc_dev.revision,"%x %x",cid->hwrev, cid->fwrev);
-+ mmc_dev.removable = 0;
-+ mmc_dev.block_read = mmc_bread;
-+
-+ /* MMC exists, get CSD too */
-+ resp = mmc_cmd(MMC_CMD_SET_RCA, MMC_DEFAULT_RCA, CMD_F_RESP);
-+ if (is_sd)
-+ rca = resp[0] >> 16;
-+
-+ resp = mmc_cmd(MMC_CMD_SEND_CSD, rca<<16, CMD_F_RESP|CMD_F_RESP_LONG);
-+ if (resp) {
-+ mmc_csd_t *csd = (mmc_csd_t *)resp;
-+ memcpy(&mmc_csd, csd, sizeof(csd));
-+ rc = 0;
-+ mmc_ready = 1;
-+ /* FIXME add verbose printout for csd */
-+ printf("READ_BL_LEN=%u, C_SIZE_MULT=%u, C_SIZE=%u\n",
-+ csd->read_bl_len, csd->c_size_mult1, csd->c_size);
-+ printf("size = %u\n", mmc_size(csd));
-+ }
-+ }
-+
-+ resp = mmc_cmd(MMC_CMD_SELECT_CARD, rca<<16, CMD_F_RESP);
-+
-+#ifdef CONFIG_MMC_WIDE
-+ if (is_sd) {
-+ resp = mmc_cmd(55, rca<<16, CMD_F_RESP);
-+ resp = mmc_cmd(6, 0x02, CMD_F_RESP);
-+ wide = 1;
-+ }
-+#endif
-+
-+ fat_register_device(&mmc_dev,1); /* partitions start counting with 1 */
-+
-+ return rc;
-+}
-+
-+int
-+mmc_ident(block_dev_desc_t *dev)
-+{
-+ return 0;
-+}
-+
-+int
-+mmc2info(ulong addr)
-+{
-+ /* FIXME hard codes to 32 MB device */
-+ if (addr >= CFG_MMC_BASE && addr < CFG_MMC_BASE + 0x02000000) {
-+ return 1;
-+ }
-+ return 0;
-+}
-+
-+#endif /* CONFIG_MMC */
-diff --git a/cpu/arm920t/s3c24x0/nand.c b/cpu/arm920t/s3c24x0/nand.c
-new file mode 100644
-index 0000000..f720229
---- /dev/null
-+++ b/cpu/arm920t/s3c24x0/nand.c
-@@ -0,0 +1,212 @@
-+/*
-+ * (C) Copyright 2006 Harald Welte <hwelte at hmw-consulting.de>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+
-+#if 0
-+#define DEBUGN printf
-+#else
-+#define DEBUGN(x, args ...) {}
-+#endif
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
-+#if !defined(CFG_NAND_LEGACY)
-+
-+#include <nand.h>
-+#include <s3c2410.h>
-+
-+#define __REGb(x) (*(volatile unsigned char *)(x))
-+#define __REGi(x) (*(volatile unsigned int *)(x))
-+
-+#define NF_BASE 0x4e000000
-+#define NFCONF __REGi(NF_BASE + 0x0)
-+#define NFCMD __REGb(NF_BASE + 0x4)
-+#define NFADDR __REGb(NF_BASE + 0x8)
-+#define NFDATA __REGb(NF_BASE + 0xc)
-+#define NFSTAT __REGb(NF_BASE + 0x10)
-+
-+#define S3C2410_NFCONF_EN (1<<15)
-+#define S3C2410_NFCONF_512BYTE (1<<14)
-+#define S3C2410_NFCONF_4STEP (1<<13)
-+#define S3C2410_NFCONF_INITECC (1<<12)
-+#define S3C2410_NFCONF_nFCE (1<<11)
-+#define S3C2410_NFCONF_TACLS(x) ((x)<<8)
-+#define S3C2410_NFCONF_TWRPH0(x) ((x)<<4)
-+#define S3C2410_NFCONF_TWRPH1(x) ((x)<<0)
-+
-+static u16 s3c2410_read_word(struct mtd_info *mtd)
-+{
-+ unsigned char byte = 0;
-+
-+ printf("s3c2410_read_word: WARNING, this function is not implemented yet\n");
-+ return byte;
-+}
-+
-+static void s3c2410_write_word(struct mtd_info *mtd, u16 word)
-+{
-+ printf("s3c2410_write_word: WARNING, this function is not implemented yet\n");
-+}
-+
-+static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+
-+ DEBUGN("hwcontrol(): 0x%02x: ", cmd);
-+
-+ switch (cmd) {
-+ case NAND_CTL_SETNCE:
-+ NFCONF &= ~S3C2410_NFCONF_nFCE;
-+ DEBUGN("NFCONF=0x%08x\n", NFCONF);
-+ break;
-+ case NAND_CTL_CLRNCE:
-+ NFCONF |= S3C2410_NFCONF_nFCE;
-+ DEBUGN("NFCONF=0x%08x\n", NFCONF);
-+ break;
-+ case NAND_CTL_SETALE:
-+ chip->IO_ADDR_W = NF_BASE + 0x8;
-+ DEBUGN("SETALE\n");
-+ break;
-+ case NAND_CTL_SETCLE:
-+ chip->IO_ADDR_W = NF_BASE + 0x4;
-+ DEBUGN("SETCLE\n");
-+ break;
-+ default:
-+ chip->IO_ADDR_W = NF_BASE + 0xc;
-+ break;
-+ }
-+ return;
-+}
-+
-+static int s3c2410_dev_ready(struct mtd_info *mtd)
-+{
-+ DEBUGN("dev_ready\n");
-+ return (NFSTAT & 0x01);
-+}
-+
-+static void s3c2410_cmdfunc(struct mtd_info *mtd, unsigned cmd,
-+ int column, int page_addr)
-+{
-+ DEBUGN("cmdfunc(): 0x%02x, col=%d, page=%d\n", cmd, column, page_addr);
-+
-+ switch (cmd) {
-+ case NAND_CMD_READ0:
-+ case NAND_CMD_READ1:
-+ case NAND_CMD_READOOB:
-+ NFCMD = cmd;
-+ NFADDR = column & 0xff;
-+ NFADDR = page_addr & 0xff;
-+ NFADDR = (page_addr >> 8) & 0xff;
-+ NFADDR = (page_addr >> 16) & 0xff;
-+ break;
-+ case NAND_CMD_READID:
-+ NFCMD = cmd;
-+ NFADDR = 0;
-+ break;
-+ case NAND_CMD_PAGEPROG:
-+ NFCMD = cmd;
-+ printf("PAGEPROG not implemented\n");
-+ break;
-+ case NAND_CMD_ERASE1:
-+ NFCMD = cmd;
-+ NFADDR = page_addr & 0xff;
-+ NFADDR = (page_addr >> 8) & 0xff;
-+ NFADDR = (page_addr >> 16) & 0xff;
-+ break;
-+ case NAND_CMD_ERASE2:
-+ NFCMD = cmd;
-+ break;
-+ case NAND_CMD_SEQIN:
-+ printf("SEQIN not implemented\n");
-+ break;
-+ case NAND_CMD_STATUS:
-+ NFCMD = cmd;
-+ break;
-+ case NAND_CMD_RESET:
-+ NFCMD = cmd;
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ while (!s3c2410_dev_ready(mtd));
-+}
-+
-+void board_nand_init(struct nand_chip *nand)
-+{
-+ u_int32_t cfg;
-+ u_int8_t tacls, twrph0, twrph1;
-+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-+
-+ DEBUGN("board_nand_init()\n");
-+
-+ clk_power->CLKCON |= (1 << 4);
-+
-+ /* initialize hardware */
-+ twrph0 = 3; twrph1 = 0; tacls = 0;
-+
-+ /* default timings: maximum */
-+ //twrph0 = 8; twrph1 = 8; tacls = 8;
-+
-+ cfg = S3C2410_NFCONF_EN;
-+ cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
-+ cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
-+ cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
-+
-+ //NFCONF = cfg;
-+ NFCONF = 0xf842;
-+
-+ /* initialize nand_chip data structure */
-+ nand->IO_ADDR_R = nand->IO_ADDR_W = 0x4e00000c;
-+
-+ /* read_buf and write_buf are default */
-+ /* read_byte and write_byte are default */
-+
-+ /* need to override word read/write since default routines try 16bit wide
-+ * register access of an (in our case) 8bit register */
-+ nand->read_word = s3c2410_read_word;
-+ nand->write_word = s3c2410_write_word;
-+
-+ /* hwcontrol always must be implemented */
-+ nand->hwcontrol = s3c2410_hwcontrol;
-+
-+ nand->dev_ready = s3c2410_dev_ready;
-+
-+ nand->eccmode = NAND_ECC_SOFT;
-+ nand->options = 0;
-+ //nand->waitfunc = dfc_wait;
-+
-+ //nand->cmdfunc = s3c2410_cmdfunc;
-+ //nand->autooob = &delta_oob;
-+ //nand->badblock_pattern = &delta_bbt_descr;
-+
-+#if 0
-+ /* reset */
-+ nand->hwcontrol(NULL, NAND_CTL_SETNCE);
-+ nand->cmdfunc(NULL, NAND_CMD_RESET, -1, -1);
-+ while (nand->dev_ready(NULL) == 0) {}
-+ nand->hwcontrol(NULL, NAND_CTL_CLRNCE);
-+#endif
-+
-+ DEBUGN("end of nand_init\n");
-+}
-+
-+#else
-+ #error "U-Boot legacy NAND support not available for S3C2410"
-+#endif
-+#endif
-diff --git a/cpu/arm920t/s3c24x0/nand_read.c b/cpu/arm920t/s3c24x0/nand_read.c
-new file mode 100644
-index 0000000..9d97932
---- /dev/null
-+++ b/cpu/arm920t/s3c24x0/nand_read.c
-@@ -0,0 +1,75 @@
-+/*
-+ * nand_read.c: Simple NAND read functions for booting from NAND
-+ *
-+ * Taken from GPLv2 licensed vivi bootloader,
-+ * Copyright (C) 2002 MIZI Research, Inc.
-+ *
-+ * Author: Hwang, Chideok <hwang at mizi.com>
-+ * Date : $Date: 2004/02/04 10:37:37 $
-+ *
-+ * u-boot integration (C) 2006 by Harald Welte <hwelte at hmw-consulting.de>
-+ */
-+
-+#include <common.h>
-+
-+#ifdef CONFIG_S3C2410_NAND_BOOT
-+
-+#define __REGb(x) (*(volatile unsigned char *)(x))
-+#define __REGi(x) (*(volatile unsigned int *)(x))
-+#define NF_BASE 0x4e000000
-+#define NFCONF __REGi(NF_BASE + 0x0)
-+#define NFCMD __REGb(NF_BASE + 0x4)
-+#define NFADDR __REGb(NF_BASE + 0x8)
-+#define NFDATA __REGb(NF_BASE + 0xc)
-+#define NFSTAT __REGb(NF_BASE + 0x10)
-+
-+#define BUSY 1
-+inline void wait_idle(void) {
-+ int i;
-+
-+ while(!(NFSTAT & BUSY))
-+ for(i=0; i<10; i++);
-+}
-+
-+#define NAND_SECTOR_SIZE 512
-+#define NAND_BLOCK_MASK (NAND_SECTOR_SIZE - 1)
-+
-+/* low level nand read function */
-+int
-+nand_read_ll(unsigned char *buf, unsigned long start_addr, int size)
-+{
-+ int i, j;
-+
-+ if ((start_addr & NAND_BLOCK_MASK) || (size & NAND_BLOCK_MASK)) {
-+ return -1; /* invalid alignment */
-+ }
-+
-+ /* chip Enable */
-+ NFCONF &= ~0x800;
-+ for(i=0; i<10; i++);
-+
-+ for(i=start_addr; i < (start_addr + size);) {
-+ /* READ0 */
-+ NFCMD = 0;
-+
-+ /* Write Address */
-+ NFADDR = i & 0xff;
-+ NFADDR = (i >> 9) & 0xff;
-+ NFADDR = (i >> 17) & 0xff;
-+ NFADDR = (i >> 25) & 0xff;
-+
-+ wait_idle();
-+
-+ for(j=0; j < NAND_SECTOR_SIZE; j++, i++) {
-+ *buf = (NFDATA & 0xff);
-+ buf++;
-+ }
-+ }
-+
-+ /* chip Disable */
-+ NFCONF |= 0x800; /* chip disable */
-+
-+ return 0;
-+}
-+
-+#endif /* CONFIG_S3C2410_NAND_BOOT */
-diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S
-index 346f0d0..232e2c2 100644
---- a/cpu/arm920t/start.S
-+++ b/cpu/arm920t/start.S
-@@ -5,6 +5,10 @@
- * Copyright (c) 2002 Alex Züpke <azu at sysgo.de>
- * Copyright (c) 2002 Gary Jennejohn <gj at denx.de>
- *
-+ * S3C2410 NAND portions
-+ * Copyright (c) 2001 MIZI Research, Inc.
-+ * Copyright (c) 2006 Harald Welte <hwelte at hmw-consulting.de>
-+ *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
-@@ -27,6 +31,7 @@
-
- #include <config.h>
- #include <version.h>
-+#include <s3c2410.h>
-
-
- /*
-@@ -161,6 +166,7 @@ #ifndef CONFIG_SKIP_LOWLEVEL_INIT
- #endif
-
- #ifndef CONFIG_SKIP_RELOCATE_UBOOT
-+#ifndef CONFIG_S3C2410_NAND_BOOT
- relocate: /* relocate U-Boot to RAM */
- adr r0, _start /* r0 <- current position of code */
- ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
-@@ -177,6 +183,93 @@ copy_loop:
- stmia r1!, {r3-r10} /* copy to target address [r1] */
- cmp r0, r2 /* until source end addreee [r2] */
- ble copy_loop
-+#else /* NAND_BOOT */
-+relocate:
-+copy_myself:
-+ /* mov r10, lr */
-+
-+ @ reset NAND
-+ mov r1, #S3C2410_NAND_BASE
-+ ldr r2, =0xf842 @ initial value enable tacls=3,rph0=6,rph1=0
-+ str r2, [r1, #oNFCONF]
-+ ldr r2, [r1, #oNFCONF]
-+ bic r2, r2, #0x800 @ enable chip
-+ str r2, [r1, #oNFCONF]
-+ mov r2, #0xff @ RESET command
-+ strb r2, [r1, #oNFCMD]
-+ mov r3, #0 @ wait
-+1: add r3, r3, #0x1
-+ cmp r3, #0xa
-+ blt 1b
-+2: ldr r2, [r1, #oNFSTAT] @ wait ready
-+ tst r2, #0x1
-+ beq 2b
-+ ldr r2, [r1, #oNFCONF]
-+ orr r2, r2, #0x800 @ disable chip
-+ str r2, [r1, #oNFCONF]
-+
-+#if 0
-+ @ get ready to call C functions (for nand_read())
-+ ldr sp, DW_STACK_START @ setup stack pointer
-+ mov fp, #0 @ no previous frame, so fp=0
-+#else
-+ ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
-+ sub r0, r0, #CFG_MALLOC_LEN /* malloc area */
-+ sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */
-+#ifdef CONFIG_USE_IRQ
-+ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
-+#endif
-+ sub sp, r0, #12 /* leave 3 words for abort-stack */
-+#endif
-+
-+ @ copy u-boot to RAM
-+ ldr r0, _TEXT_BASE
-+ mov r1, #0x0
-+ mov r2, #0x30000
-+ bl nand_read_ll
-+
-+ tst r0, #0x0
-+ beq ok_nand_read
-+#ifdef CONFIG_DEBUG_LL
-+bad_nand_read:
-+ ldr r0, STR_FAIL
-+ ldr r1, SerBase
-+ bl PrintWord
-+1: b 1b @ infinite loop
-+#endif
-+
-+ok_nand_read:
-+#ifdef CONFIG_DEBUG_LL
-+ ldr r0, STR_OK
-+ ldr r1, SerBase
-+ bl PrintWord
-+#endif
-+
-+ @ verify
-+ mov r0, #0
-+ @ldr r1, =0x33f00000
-+ ldr r1, _TEXT_BASE
-+ mov r2, #0x400 @ 4 bytes * 1024 = 4K-bytes
-+go_next:
-+ ldr r3, [r0], #4
-+ ldr r4, [r1], #4
-+ teq r3, r4
-+ bne notmatch
-+ subs r2, r2, #4
-+ beq done_nand_read
-+ bne go_next
-+notmatch:
-+#ifdef CONFIG_DEBUG_LL
-+ sub r0, r0, #4
-+ ldr r1, SerBase
-+ bl PrintHexWord
-+ ldr r0, STR_FAIL
-+ ldr r1, SerBase
-+ bl PrintWord
-+#endif
-+1: b 1b
-+done_nand_read:
-+#endif /* NAND_BOOT */
- #endif /* CONFIG_SKIP_RELOCATE_UBOOT */
-
- /* Set up the stack */
-diff --git a/drivers/Makefile b/drivers/Makefile
-index 9be95c7..eef266a 100644
---- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -50,7 +50,7 @@ OBJS = 3c589.o 5701rls.o ali512x.o \
- videomodes.o w83c553f.o \
- ks8695eth.o \
- pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \
-- rpx_pcmcia.o
-+ rpx_pcmcia.o s3c2410_fb.o
-
- all: $(LIB)
-
-diff --git a/drivers/cs8900.c b/drivers/cs8900.c
-index 082434c..1cce622 100644
---- a/drivers/cs8900.c
-+++ b/drivers/cs8900.c
-@@ -120,6 +120,7 @@ void cs8900_get_enetaddr (uchar * addr)
- unsigned char env_enetaddr[6];
- char *tmp = getenv ("ethaddr");
- char *end;
-+ unsigned short chip_id;
-
- for (i=0; i<6; i++) {
- env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
-@@ -128,7 +129,9 @@ void cs8900_get_enetaddr (uchar * addr)
- }
-
- /* verify chip id */
-- if (get_reg_init_bus (PP_ChipID) != 0x630e)
-+ chip_id = get_reg_init_bus (PP_ChipID);
-+ printf("\ncs8900a chipid 0x%04x\n", chip_id);
-+ if (chip_id != 0x630e)
- return;
- eth_reset ();
- if ((get_reg (PP_SelfST) & (PP_SelfSTAT_EEPROM | PP_SelfSTAT_EEPROM_OK)) ==
-diff --git a/drivers/s3c2410_fb.c b/drivers/s3c2410_fb.c
-new file mode 100644
-index 0000000..fc389a9
---- /dev/null
-+++ b/drivers/s3c2410_fb.c
-@@ -0,0 +1,182 @@
-+/*
-+ * (C) Copyright 2006 Harald Welte <hwelte at hmw-consulting.de>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+
-+#if defined(CONFIG_VIDEO_S3C2410)
-+
-+#include <video_fb.h>
-+#include "videomodes.h"
-+#include <s3c2410.h>
-+/*
-+ * Export Graphic Device
-+ */
-+GraphicDevice smi;
-+
-+#define VIDEO_MEM_SIZE 0x200000
-+
-+/*******************************************************************************
-+ *
-+ * Init video chip with common Linux graphic modes (lilo)
-+ */
-+void *video_hw_init (void)
-+{
-+ S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD();
-+ GraphicDevice *pGD = (GraphicDevice *)&smi;
-+ int videomode;
-+ unsigned long t1, hsynch, vsynch;
-+ char *penv;
-+ int tmp, i, bits_per_pixel;
-+ struct ctfb_res_modes *res_mode;
-+ struct ctfb_res_modes var_mode;
-+ unsigned char videoout;
-+ unsigned int *vm;
-+
-+ /* Search for video chip */
-+ printf("Video: ");
-+
-+ tmp = 0;
-+
-+ videomode = CFG_DEFAULT_VIDEO_MODE;
-+ /* get video mode via environment */
-+ if ((penv = getenv ("videomode")) != NULL) {
-+ /* deceide if it is a string */
-+ if (penv[0] <= '9') {
-+ videomode = (int) simple_strtoul (penv, NULL, 16);
-+ tmp = 1;
-+ }
-+ } else {
-+ tmp = 1;
-+ }
-+ if (tmp) {
-+ /* parameter are vesa modes */
-+ /* search params */
-+ for (i = 0; i < VESA_MODES_COUNT; i++) {
-+ if (vesa_modes[i].vesanr == videomode)
-+ break;
-+ }
-+ if (i == VESA_MODES_COUNT) {
-+ printf ("no VESA Mode found, switching to mode 0x%x ", CFG_DEFAULT_VIDEO_MODE);
-+ i = 0;
-+ }
-+ res_mode =
-+ (struct ctfb_res_modes *) &res_mode_init[vesa_modes[i].
-+ resindex];
-+ bits_per_pixel = vesa_modes[i].bits_per_pixel;
-+ } else {
-+
-+ res_mode = (struct ctfb_res_modes *) &var_mode;
-+ bits_per_pixel = video_get_params (res_mode, penv);
-+ }
-+
-+ /* calculate hsynch and vsynch freq (info only) */
-+ t1 = (res_mode->left_margin + res_mode->xres +
-+ res_mode->right_margin + res_mode->hsync_len) / 8;
-+ t1 *= 8;
-+ t1 *= res_mode->pixclock;
-+ t1 /= 1000;
-+ hsynch = 1000000000L / t1;
-+ t1 *=
-+ (res_mode->upper_margin + res_mode->yres +
-+ res_mode->lower_margin + res_mode->vsync_len);
-+ t1 /= 1000;
-+ vsynch = 1000000000L / t1;
-+
-+ /* fill in Graphic device struct */
-+ sprintf (pGD->modeIdent, "%dx%dx%d %ldkHz %ldHz", res_mode->xres,
-+ res_mode->yres, bits_per_pixel, (hsynch / 1000),
-+ (vsynch / 1000));
-+ printf ("%s\n", pGD->modeIdent);
-+ pGD->winSizeX = res_mode->xres;
-+ pGD->winSizeY = res_mode->yres;
-+ pGD->plnSizeX = res_mode->xres;
-+ pGD->plnSizeY = res_mode->yres;
-+ switch (bits_per_pixel) {
-+ case 8:
-+ pGD->gdfBytesPP = 1;
-+ pGD->gdfIndex = GDF__8BIT_INDEX;
-+ break;
-+ case 15:
-+ pGD->gdfBytesPP = 2;
-+ pGD->gdfIndex = GDF_15BIT_555RGB;
-+ break;
-+ case 16:
-+ pGD->gdfBytesPP = 2;
-+ pGD->gdfIndex = GDF_16BIT_565RGB;
-+ break;
-+ case 24:
-+ pGD->gdfBytesPP = 3;
-+ pGD->gdfIndex = GDF_24BIT_888RGB;
-+ break;
-+ }
-+
-+#if 0
-+ pGD->isaBase = CFG_ISA_IO;
-+ pGD->pciBase = pci_mem_base;
-+ pGD->dprBase = (pci_mem_base + 0x400000 + 0x8000);
-+ pGD->vprBase = (pci_mem_base + 0x400000 + 0xc000);
-+ pGD->cprBase = (pci_mem_base + 0x400000 + 0xe000);
-+#endif
-+ pGD->frameAdrs = LCD_VIDEO_ADDR;
-+ pGD->memSize = VIDEO_MEM_SIZE;
-+
-+ lcd->LCDSADDR1 = LCD_VIDEO_ADDR >> 1;
-+ lcd->LCDSADDR2 = (LCD_VIDEO_ADDR + 0x4b000) >> 1;
-+ lcd->LCDSADDR3 = 0x000000f0;
-+
-+ lcd->LCDCON1 = 0x00000479;
-+ lcd->LCDCON2 = 0x014fc183;
-+ lcd->LCDCON3 = 0x0060ef07;
-+ lcd->LCDCON4 = 0x00000003;
-+ lcd->LCDCON5 = 0x00000b09;
-+ lcd->LPCSEL = 0x00000cf0;
-+
-+ pGD->winSizeX = pGD->plnSizeX = 240;
-+ pGD->winSizeY = pGD->plnSizeY = 320;
-+ pGD->gdfBytesPP = 2;
-+ pGD->gdfIndex = GDF_16BIT_565RGB;
-+
-+ /* Enable Display */
-+ videoout = 2; /* Default output is CRT */
-+ if ((penv = getenv ("videoout")) != NULL) {
-+ /* deceide if it is a string */
-+ videoout = (int) simple_strtoul (penv, NULL, 16);
-+ }
-+
-+ printf("clearing video memory\n");
-+ /* Clear video memory */
-+ i = pGD->memSize/4;
-+ vm = (unsigned int *)pGD->frameAdrs;
-+ while(i--)
-+ *vm++ = 0;
-+
-+ printf("returning from video_hw_init\n");
-+ return ((void*)&smi);
-+}
-+
-+void
-+video_set_lut (unsigned int index, /* color number */
-+ unsigned char r, /* red */
-+ unsigned char g, /* green */
-+ unsigned char b /* blue */
-+ )
-+{
-+}
-+
-+#endif /* CONFIG_VIDEO_S3C2410 */
-diff --git a/drivers/usbdcore_s3c2410.c b/drivers/usbdcore_s3c2410.c
-new file mode 100644
-index 0000000..143fdf2
---- /dev/null
-+++ b/drivers/usbdcore_s3c2410.c
-@@ -0,0 +1,1609 @@
-+/*
-+ * (C) Copyright 2003
-+ * Gerry Hamel, geh at ti.com, Texas Instruments
-+ *
-+ * Based on
-+ * linux/drivers/usb/device/bi/omap.c
-+ * TI OMAP1510 USB bus interface driver
-+ *
-+ * Author: MontaVista Software, Inc.
-+ * source at mvista.com
-+ * (C) Copyright 2002
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ */
-+
-+#include <common.h>
-+
-+#if defined(CONFIG_S3C2410) && defined(CONFIG_USB_DEVICE)
-+
-+#include <asm/io.h>
-+
-+#include "usbdcore.h"
-+#include "usbdcore_s3c2410.h"
-+#include "usbdcore_ep0.h"
-+
-+
-+#define UDC_INIT_MDELAY 80 /* Device settle delay */
-+#define UDC_MAX_ENDPOINTS 31 /* Number of endpoints on this UDC */
-+
-+/* Some kind of debugging output... */
-+#if 1
-+#define UDCDBG(str)
-+#define UDCDBGA(fmt,args...)
-+#else /* The bugs still exists... */
-+#define UDCDBG(str) serial_printf("[%s] %s:%d: " str "\n", __FILE__,__FUNCTION__,__LINE__)
-+#define UDCDBGA(fmt,args...) serial_printf("[%s] %s:%d: " fmt "\n", __FILE__,__FUNCTION__,__LINE__, ##args)
-+#endif
-+
-+#if 1
-+#define UDCREG(name)
-+#define UDCREGL(name)
-+#else /* The bugs still exists... */
-+#define UDCREG(name) serial_printf("%s():%d: %s[%08x]=%.4x\n",__FUNCTION__,__LINE__, (#name), name, inw(name)) /* For 16-bit regs */
-+#define UDCREGL(name) serial_printf("%s():%d: %s[%08x]=%.8x\n",__FUNCTION__,__LINE__, (#name), name, inl(name)) /* For 32-bit regs */
-+#endif
-+
-+
-+static struct urb *ep0_urb = NULL;
-+
-+static struct usb_device_instance *udc_device; /* Used in interrupt handler */
-+static u16 udc_devstat = 0; /* UDC status (DEVSTAT) */
-+static u32 udc_interrupts = 0;
-+
-+static void udc_stall_ep (unsigned int ep_addr);
-+
-+
-+static struct usb_endpoint_instance *s3c2410_find_ep (int ep)
-+{
-+ int i;
-+
-+ for (i = 0; i < udc_device->bus->max_endpoints; i++) {
-+ if (udc_device->bus->endpoint_array[i].endpoint_address == ep)
-+ return &udc_device->bus->endpoint_array[i];
-+ }
-+ return NULL;
-+}
-+
-+/* ************************************************************************** */
-+/* IO
-+ */
-+
-+/*
-+ * omap1510_prepare_endpoint_for_rx
-+ *
-+ * This function implements TRM Figure 14-11.
-+ *
-+ * The endpoint to prepare for transfer is specified as a physical endpoint
-+ * number. For OUT (rx) endpoints 1 through 15, the corresponding endpoint
-+ * configuration register is checked to see if the endpoint is ISO or not.
-+ * If the OUT endpoint is valid and is non-ISO then its FIFO is enabled.
-+ * No action is taken for endpoint 0 or for IN (tx) endpoints 16 through 30.
-+ */
-+static void omap1510_prepare_endpoint_for_rx (int ep_addr)
-+{
-+ int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
-+
-+ UDCDBGA ("omap1510_prepare_endpoint %x", ep_addr);
-+ if (((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)) {
-+ if ((inw (UDC_EP_RX (ep_num)) &
-+ (UDC_EPn_RX_Valid | UDC_EPn_RX_Iso)) ==
-+ UDC_EPn_RX_Valid) {
-+ /* rx endpoint is valid, non-ISO, so enable its FIFO */
-+ outw (UDC_EP_Sel | ep_num, UDC_EP_NUM);
-+ outw (UDC_Set_FIFO_En, UDC_CTRL);
-+ outw (0, UDC_EP_NUM);
-+ }
-+ }
-+}
-+
-+/* omap1510_configure_endpoints
-+ *
-+ * This function implements TRM Figure 14-10.
-+ */
-+static void omap1510_configure_endpoints (struct usb_device_instance *device)
-+{
-+ int ep;
-+ struct usb_bus_instance *bus;
-+ struct usb_endpoint_instance *endpoint;
-+ unsigned short ep_ptr;
-+ unsigned short ep_size;
-+ unsigned short ep_isoc;
-+ unsigned short ep_doublebuffer;
-+ int ep_addr;
-+ int packet_size;
-+ int buffer_size;
-+ int attributes;
-+
-+ bus = device->bus;
-+
-+ /* There is a dedicated 2048 byte buffer for USB packets that may be
-+ * arbitrarily partitioned among the endpoints on 8-byte boundaries.
-+ * The first 8 bytes are reserved for receiving setup packets on
-+ * endpoint 0.
-+ */
-+ ep_ptr = 8; /* reserve the first 8 bytes for the setup fifo */
-+
-+ for (ep = 0; ep < bus->max_endpoints; ep++) {
-+ endpoint = bus->endpoint_array + ep;
-+ ep_addr = endpoint->endpoint_address;
-+ if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
-+ /* IN endpoint */
-+ packet_size = endpoint->tx_packetSize;
-+ attributes = endpoint->tx_attributes;
-+ } else {
-+ /* OUT endpoint */
-+ packet_size = endpoint->rcv_packetSize;
-+ attributes = endpoint->rcv_attributes;
-+ }
-+
-+ switch (packet_size) {
-+ case 0:
-+ ep_size = 0;
-+ break;
-+ case 8:
-+ ep_size = 0;
-+ break;
-+ case 16:
-+ ep_size = 1;
-+ break;
-+ case 32:
-+ ep_size = 2;
-+ break;
-+ case 64:
-+ ep_size = 3;
-+ break;
-+ case 128:
-+ ep_size = 4;
-+ break;
-+ case 256:
-+ ep_size = 5;
-+ break;
-+ case 512:
-+ ep_size = 6;
-+ break;
-+ default:
-+ UDCDBGA ("ep 0x%02x has bad packet size %d",
-+ ep_addr, packet_size);
-+ packet_size = 0;
-+ ep_size = 0;
-+ break;
-+ }
-+
-+ switch (attributes & USB_ENDPOINT_XFERTYPE_MASK) {
-+ case USB_ENDPOINT_XFER_CONTROL:
-+ case USB_ENDPOINT_XFER_BULK:
-+ case USB_ENDPOINT_XFER_INT:
-+ default:
-+ /* A non-isochronous endpoint may optionally be
-+ * double-buffered. For now we disable
-+ * double-buffering.
-+ */
-+ ep_doublebuffer = 0;
-+ ep_isoc = 0;
-+ if (packet_size > 64)
-+ packet_size = 0;
-+ if (!ep || !ep_doublebuffer)
-+ buffer_size = packet_size;
-+ else
-+ buffer_size = packet_size * 2;
-+ break;
-+ case USB_ENDPOINT_XFER_ISOC:
-+ /* Isochronous endpoints are always double-
-+ * buffered, but the double-buffering bit
-+ * in the endpoint configuration register
-+ * becomes the msb of the endpoint size so we
-+ * set the double-buffering flag to zero.
-+ */
-+ ep_doublebuffer = 0;
-+ ep_isoc = 1;
-+ buffer_size = packet_size * 2;
-+ break;
-+ }
-+
-+ /* check to see if our packet buffer RAM is exhausted */
-+ if ((ep_ptr + buffer_size) > 2048) {
-+ UDCDBGA ("out of packet RAM for ep 0x%02x buf size %d", ep_addr, buffer_size);
-+ buffer_size = packet_size = 0;
-+ }
-+
-+ /* force a default configuration for endpoint 0 since it is
-+ * always enabled
-+ */
-+ if (!ep && ((packet_size < 8) || (packet_size > 64))) {
-+ buffer_size = packet_size = 64;
-+ ep_size = 3;
-+ }
-+
-+ if (!ep) {
-+ /* configure endpoint 0 */
-+ outw ((ep_size << 12) | (ep_ptr >> 3), UDC_EP0);
-+ /*UDCDBGA("ep 0 buffer offset 0x%03x packet size 0x%03x", */
-+ /* ep_ptr, packet_size); */
-+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
-+ /* IN endpoint */
-+ if (packet_size) {
-+ outw ((1 << 15) | (ep_doublebuffer << 14) |
-+ (ep_size << 12) | (ep_isoc << 11) |
-+ (ep_ptr >> 3),
-+ UDC_EP_TX (ep_addr &
-+ USB_ENDPOINT_NUMBER_MASK));
-+ UDCDBGA ("IN ep %d buffer offset 0x%03x"
-+ " packet size 0x%03x",
-+ ep_addr & USB_ENDPOINT_NUMBER_MASK,
-+ ep_ptr, packet_size);
-+ } else {
-+ outw (0,
-+ UDC_EP_TX (ep_addr &
-+ USB_ENDPOINT_NUMBER_MASK));
-+ }
-+ } else {
-+ /* OUT endpoint */
-+ if (packet_size) {
-+ outw ((1 << 15) | (ep_doublebuffer << 14) |
-+ (ep_size << 12) | (ep_isoc << 11) |
-+ (ep_ptr >> 3),
-+ UDC_EP_RX (ep_addr &
-+ USB_ENDPOINT_NUMBER_MASK));
-+ UDCDBGA ("OUT ep %d buffer offset 0x%03x"
-+ " packet size 0x%03x",
-+ ep_addr & USB_ENDPOINT_NUMBER_MASK,
-+ ep_ptr, packet_size);
-+ } else {
-+ outw (0,
-+ UDC_EP_RX (ep_addr &
-+ USB_ENDPOINT_NUMBER_MASK));
-+ }
-+ }
-+ ep_ptr += buffer_size;
-+ }
-+}
-+
-+static void s3c2410_deconfigure_device (void)
-+{
-+ int epnum;
-+
-+ UDCDBG ("clear Cfg_Lock");
-+ outw (inw (UDC_SYSCON1) & ~UDC_Cfg_Lock, UDC_SYSCON1);
-+ UDCREG (UDC_SYSCON1);
-+
-+ /* deconfigure all endpoints */
-+ for (epnum = 1; epnum <= 15; epnum++) {
-+ outw (0, UDC_EP_RX (epnum));
-+ outw (0, UDC_EP_TX (epnum));
-+ }
-+}
-+
-+static void s3c2410_configure_device (struct usb_device_instance *device)
-+{
-+ u_int32_t tmp;
-+
-+ s3c2410_configure_endpoints(device);
-+
-+ /* disable EP0-4 SUBD interrupts ? */
-+ outw(0x00, S3C2410_UDC_USB_INT_EN_REG);
-+
-+ /* UPLL already configured by board-level init code */
-+
-+ /* configure USB pads to device mode */
-+ tmp = inw(S3C2410_MISCCR);
-+ tmp &= ~(S3C2410_MISCCR_USBHOST|S3C2410_MISCCR_USBSUSPND1);
-+ outw(tmp, S3C2410_MISCCR);
-+
-+ tmp = inb(S3C2410_CLKSLOW);
-+ tmp &= ~S3C2410_CLKSLOW_USB_CLK_DISABLE;
-+ outw(tmp, S3C2410_CLKSLOW);
-+
-+ /* clear interrupt registers */
-+ inb(S3C2410_UDC_EP_INT_REG);
-+ inb(S3C2410_UDC_USB_INT_REG);
-+
-+ /* enable USB interrupts for RESET and SUSPEND/RESUME */
-+ outb(S3C2410_UDC_USBINT_RESET|S3C2410_UDC_USBINT_SUSPEND,
-+ S3C2410_UDC_USB_INT_EN_REG);
-+
-+}
-+
-+/* omap1510_write_noniso_tx_fifo
-+ *
-+ * This function implements TRM Figure 14-30.
-+ *
-+ * If the endpoint has an active tx_urb, then the next packet of data from the
-+ * URB is written to the tx FIFO. The total amount of data in the urb is given
-+ * by urb->actual_length. The maximum amount of data that can be sent in any
-+ * one packet is given by endpoint->tx_packetSize. The number of data bytes
-+ * from this URB that have already been transmitted is given by endpoint->sent.
-+ * endpoint->last is updated by this routine with the number of data bytes
-+ * transmitted in this packet.
-+ *
-+ * In accordance with Figure 14-30, the EP_NUM register must already have been
-+ * written with the value to select the appropriate tx FIFO before this routine
-+ * is called.
-+ */
-+static void omap1510_write_noniso_tx_fifo (struct usb_endpoint_instance
-+ *endpoint)
-+{
-+ struct urb *urb = endpoint->tx_urb;
-+
-+ if (urb) {
-+ unsigned int last, i;
-+
-+ UDCDBGA ("urb->buffer %p, buffer_length %d, actual_length %d",
-+ urb->buffer, urb->buffer_length, urb->actual_length);
-+ if ((last =
-+ MIN (urb->actual_length - endpoint->sent,
-+ endpoint->tx_packetSize))) {
-+ u8 *cp = urb->buffer + endpoint->sent;
-+
-+ UDCDBGA ("endpoint->sent %d, tx_packetSize %d, last %d", endpoint->sent, endpoint->tx_packetSize, last);
-+
-+ if (((u32) cp & 1) == 0) { /* word aligned? */
-+ outsw (UDC_DATA, cp, last >> 1);
-+ } else { /* byte aligned. */
-+ for (i = 0; i < (last >> 1); i++) {
-+ u16 w = ((u16) cp[2 * i + 1] << 8) |
-+ (u16) cp[2 * i];
-+ outw (w, UDC_DATA);
-+ }
-+ }
-+ if (last & 1) {
-+ outb (*(cp + last - 1), UDC_DATA);
-+ }
-+ }
-+ endpoint->last = last;
-+ }
-+}
-+
-+/* omap1510_read_noniso_rx_fifo
-+ *
-+ * This function implements TRM Figure 14-28.
-+ *
-+ * If the endpoint has an active rcv_urb, then the next packet of data is read
-+ * from the rcv FIFO and written to rcv_urb->buffer at offset
-+ * rcv_urb->actual_length to append the packet data to the data from any
-+ * previous packets for this transfer. We assume that there is sufficient room
-+ * left in the buffer to hold an entire packet of data.
-+ *
-+ * The return value is the number of bytes read from the FIFO for this packet.
-+ *
-+ * In accordance with Figure 14-28, the EP_NUM register must already have been
-+ * written with the value to select the appropriate rcv FIFO before this routine
-+ * is called.
-+ */
-+static int omap1510_read_noniso_rx_fifo (struct usb_endpoint_instance
-+ *endpoint)
-+{
-+ struct urb *urb = endpoint->rcv_urb;
-+ int len = 0;
-+
-+ if (urb) {
-+ len = inw (UDC_RXFSTAT);
-+
-+ if (len) {
-+ unsigned char *cp = urb->buffer + urb->actual_length;
-+
-+ insw (UDC_DATA, cp, len >> 1);
-+ if (len & 1)
-+ *(cp + len - 1) = inb (UDC_DATA);
-+ }
-+ }
-+ return len;
-+}
-+
-+/* omap1510_prepare_for_control_write_status
-+ *
-+ * This function implements TRM Figure 14-17.
-+ *
-+ * We have to deal here with non-autodecoded control writes that haven't already
-+ * been dealt with by ep0_recv_setup. The non-autodecoded standard control
-+ * write requests are: set/clear endpoint feature, set configuration, set
-+ * interface, and set descriptor. ep0_recv_setup handles set/clear requests for
-+ * ENDPOINT_HALT by halting the endpoint for a set request and resetting the
-+ * endpoint for a clear request. ep0_recv_setup returns an error for
-+ * SET_DESCRIPTOR requests which causes them to be terminated with a stall by
-+ * the setup handler. A SET_INTERFACE request is handled by ep0_recv_setup by
-+ * generating a DEVICE_SET_INTERFACE event. This leaves only the
-+ * SET_CONFIGURATION event for us to deal with here.
-+ *
-+ */
-+static void omap1510_prepare_for_control_write_status (struct urb *urb)
-+{
-+ struct usb_device_request *request = &urb->device_request;;
-+
-+ /* check for a SET_CONFIGURATION request */
-+ if (request->bRequest == USB_REQ_SET_CONFIGURATION) {
-+ int configuration = le16_to_cpu (request->wValue) & 0xff;
-+ unsigned short devstat = inw (UDC_DEVSTAT);
-+
-+ if ((devstat & (UDC_ADD | UDC_CFG)) == UDC_ADD) {
-+ /* device is currently in ADDRESSED state */
-+ if (configuration) {
-+ /* Assume the specified non-zero configuration
-+ * value is valid and switch to the CONFIGURED
-+ * state.
-+ */
-+ outw (UDC_Dev_Cfg, UDC_SYSCON2);
-+ }
-+ } else if ((devstat & UDC_CFG) == UDC_CFG) {
-+ /* device is currently in CONFIGURED state */
-+ if (!configuration) {
-+ /* Switch to ADDRESSED state. */
-+ outw (UDC_Clr_Cfg, UDC_SYSCON2);
-+ }
-+ }
-+ }
-+
-+ /* select EP0 tx FIFO */
-+ outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM);
-+ /* clear endpoint (no data bytes in status stage) */
-+ outw (UDC_Clr_EP, UDC_CTRL);
-+ /* enable the EP0 tx FIFO */
-+ outw (UDC_Set_FIFO_En, UDC_CTRL);
-+ /* deselect the endpoint */
-+ outw (UDC_EP_Dir, UDC_EP_NUM);
-+}
-+
-+/* udc_state_transition_up
-+ * udc_state_transition_down
-+ *
-+ * Helper functions to implement device state changes. The device states and
-+ * the events that transition between them are:
-+ *
-+ * STATE_ATTACHED
-+ * || /\
-+ * \/ ||
-+ * DEVICE_HUB_CONFIGURED DEVICE_HUB_RESET
-+ * || /\
-+ * \/ ||
-+ * STATE_POWERED
-+ * || /\
-+ * \/ ||
-+ * DEVICE_RESET DEVICE_POWER_INTERRUPTION
-+ * || /\
-+ * \/ ||
-+ * STATE_DEFAULT
-+ * || /\
-+ * \/ ||
-+ * DEVICE_ADDRESS_ASSIGNED DEVICE_RESET
-+ * || /\
-+ * \/ ||
-+ * STATE_ADDRESSED
-+ * || /\
-+ * \/ ||
-+ * DEVICE_CONFIGURED DEVICE_DE_CONFIGURED
-+ * || /\
-+ * \/ ||
-+ * STATE_CONFIGURED
-+ *
-+ * udc_state_transition_up transitions up (in the direction from STATE_ATTACHED
-+ * to STATE_CONFIGURED) from the specified initial state to the specified final
-+ * state, passing through each intermediate state on the way. If the initial
-+ * state is at or above (i.e. nearer to STATE_CONFIGURED) the final state, then
-+ * no state transitions will take place.
-+ *
-+ * udc_state_transition_down transitions down (in the direction from
-+ * STATE_CONFIGURED to STATE_ATTACHED) from the specified initial state to the
-+ * specified final state, passing through each intermediate state on the way.
-+ * If the initial state is at or below (i.e. nearer to STATE_ATTACHED) the final
-+ * state, then no state transitions will take place.
-+ *
-+ * These functions must only be called with interrupts disabled.
-+ */
-+static void udc_state_transition_up (usb_device_state_t initial,
-+ usb_device_state_t final)
-+{
-+ if (initial < final) {
-+ switch (initial) {
-+ case STATE_ATTACHED:
-+ usbd_device_event_irq (udc_device,
-+ DEVICE_HUB_CONFIGURED, 0);
-+ if (final == STATE_POWERED)
-+ break;
-+ case STATE_POWERED:
-+ usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
-+ if (final == STATE_DEFAULT)
-+ break;
-+ case STATE_DEFAULT:
-+ usbd_device_event_irq (udc_device,
-+ DEVICE_ADDRESS_ASSIGNED, 0);
-+ if (final == STATE_ADDRESSED)
-+ break;
-+ case STATE_ADDRESSED:
-+ usbd_device_event_irq (udc_device, DEVICE_CONFIGURED,
-+ 0);
-+ case STATE_CONFIGURED:
-+ break;
-+ default:
-+ break;
-+ }
-+ }
-+}
-+
-+static void udc_state_transition_down (usb_device_state_t initial,
-+ usb_device_state_t final)
-+{
-+ if (initial > final) {
-+ switch (initial) {
-+ case STATE_CONFIGURED:
-+ usbd_device_event_irq (udc_device, DEVICE_DE_CONFIGURED, 0);
-+ if (final == STATE_ADDRESSED)
-+ break;
-+ case STATE_ADDRESSED:
-+ usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
-+ if (final == STATE_DEFAULT)
-+ break;
-+ case STATE_DEFAULT:
-+ usbd_device_event_irq (udc_device, DEVICE_POWER_INTERRUPTION, 0);
-+ if (final == STATE_POWERED)
-+ break;
-+ case STATE_POWERED:
-+ usbd_device_event_irq (udc_device, DEVICE_HUB_RESET, 0);
-+ case STATE_ATTACHED:
-+ break;
-+ default:
-+ break;
-+ }
-+ }
-+}
-+
-+/* Handle all device state changes.
-+ * This function implements TRM Figure 14-21.
-+ */
-+static void omap1510_udc_state_changed (void)
-+{
-+ u16 bits;
-+ u16 devstat = inw (UDC_DEVSTAT);
-+
-+ UDCDBGA ("state changed, devstat %x, old %x", devstat, udc_devstat);
-+
-+ bits = devstat ^ udc_devstat;
-+ if (bits) {
-+ if (bits & UDC_ATT) {
-+ if (devstat & UDC_ATT) {
-+ UDCDBG ("device attached and powered");
-+ udc_state_transition_up (udc_device->device_state, STATE_POWERED);
-+ } else {
-+ UDCDBG ("device detached or unpowered");
-+ udc_state_transition_down (udc_device->device_state, STATE_ATTACHED);
-+ }
-+ }
-+ if (bits & UDC_USB_Reset) {
-+ if (devstat & UDC_USB_Reset) {
-+ UDCDBG ("device reset in progess");
-+ udc_state_transition_down (udc_device->device_state, STATE_POWERED);
-+ } else {
-+ UDCDBG ("device reset completed");
-+ }
-+ }
-+ if (bits & UDC_DEF) {
-+ if (devstat & UDC_DEF) {
-+ UDCDBG ("device entering default state");
-+ udc_state_transition_up (udc_device->device_state, STATE_DEFAULT);
-+ } else {
-+ UDCDBG ("device leaving default state");
-+ udc_state_transition_down (udc_device->device_state, STATE_POWERED);
-+ }
-+ }
-+ if (bits & UDC_SUS) {
-+ if (devstat & UDC_SUS) {
-+ UDCDBG ("entering suspended state");
-+ usbd_device_event_irq (udc_device, DEVICE_BUS_INACTIVE, 0);
-+ } else {
-+ UDCDBG ("leaving suspended state");
-+ usbd_device_event_irq (udc_device, DEVICE_BUS_ACTIVITY, 0);
-+ }
-+ }
-+ if (bits & UDC_R_WK_OK) {
-+ UDCDBGA ("remote wakeup %s", (devstat & UDC_R_WK_OK)
-+ ? "enabled" : "disabled");
-+ }
-+ if (bits & UDC_ADD) {
-+ if (devstat & UDC_ADD) {
-+ UDCDBG ("default -> addressed");
-+ udc_state_transition_up (udc_device->device_state, STATE_ADDRESSED);
-+ } else {
-+ UDCDBG ("addressed -> default");
-+ udc_state_transition_down (udc_device->device_state, STATE_DEFAULT);
-+ }
-+ }
-+ if (bits & UDC_CFG) {
-+ if (devstat & UDC_CFG) {
-+ UDCDBG ("device configured");
-+ /* The ep0_recv_setup function generates the
-+ * DEVICE_CONFIGURED event when a
-+ * USB_REQ_SET_CONFIGURATION setup packet is
-+ * received, so we should already be in the
-+ * state STATE_CONFIGURED.
-+ */
-+ udc_state_transition_up (udc_device->device_state, STATE_CONFIGURED);
-+ } else {
-+ UDCDBG ("device deconfigured");
-+ udc_state_transition_down (udc_device->device_state, STATE_ADDRESSED);
-+ }
-+ }
-+ }
-+
-+ /* Clear interrupt source */
-+ outw (UDC_DS_Chg, UDC_IRQ_SRC);
-+
-+ /* Save current DEVSTAT */
-+ udc_devstat = devstat;
-+}
-+
-+static void s3c2410_udc_ep0(void)
-+{
-+ u_int8_t ep0csr;
-+
-+ UDCDBG("-> Entering EP0 handler");
-+
-+ S3C2410_UDC_SETIX(EP0);
-+ ep0csr = inb(S3C2410_UDC_IN_CSR1_REG);
-+
-+ /* clear stall status */
-+ if (ep0csr & S3C2410_UDC_EP0_CSR_SENTSTL) {
-+ clear_sp0_sst;
-+ /* FIXME */
-+ ep0_idle();
-+ }
-+
-+ if (ep0csr & S3C2410_UDC_EP0_CSR_SE
-+ && dev->ep0state != EP0_IDLE) {
-+ clear_ep0_se;
-+ ep0_idle();
-+ }
-+
-+ switch (dev->ep0state) {
-+ case EP0_IDLE:
-+ if (ep0crs & S3C2410_UDC_EP0_CSR_OPKRDY) {
-+ }
-+ break;
-+ case EP0_IN_DATA_PHASE:
-+ break;
-+ case EP0_OUT_DATA_PHASE:
-+ break;
-+ case EP0_END_XFER:
-+ break;
-+ case EP0_STALL:
-+ set_ep0_ss;
-+ break;
-+ }
-+}
-+
-+
-+}
-+
-+/* Handle SETUP USB interrupt.
-+ * This function implements TRM Figure 14-14.
-+ */
-+static void omap1510_udc_setup (struct usb_endpoint_instance *endpoint)
-+{
-+ UDCDBG ("-> Entering device setup");
-+
-+ do {
-+ const int setup_pktsize = 8;
-+ unsigned char *datap =
-+ (unsigned char *) &ep0_urb->device_request;
-+
-+ /* Gain access to EP 0 setup FIFO */
-+ outw (UDC_Setup_Sel, UDC_EP_NUM);
-+
-+ /* Read control request data */
-+ insb (UDC_DATA, datap, setup_pktsize);
-+
-+ UDCDBGA ("EP0 setup read [%x %x %x %x %x %x %x %x]",
-+ *(datap + 0), *(datap + 1), *(datap + 2),
-+ *(datap + 3), *(datap + 4), *(datap + 5),
-+ *(datap + 6), *(datap + 7));
-+
-+ /* Reset EP0 setup FIFO */
-+ outw (0, UDC_EP_NUM);
-+ } while (inw (UDC_IRQ_SRC) & UDC_Setup);
-+
-+ /* Try to process setup packet */
-+ if (ep0_recv_setup (ep0_urb)) {
-+ /* Not a setup packet, stall next EP0 transaction */
-+ udc_stall_ep (0);
-+ UDCDBG ("can't parse setup packet, still waiting for setup");
-+ return;
-+ }
-+
-+ /* Check direction */
-+ if ((ep0_urb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK)
-+ == USB_REQ_HOST2DEVICE) {
-+ UDCDBG ("control write on EP0");
-+ if (le16_to_cpu (ep0_urb->device_request.wLength)) {
-+ /* We don't support control write data stages.
-+ * The only standard control write request with a data
-+ * stage is SET_DESCRIPTOR, and ep0_recv_setup doesn't
-+ * support that so we just stall those requests. A
-+ * function driver might support a non-standard
-+ * write request with a data stage, but it isn't
-+ * obvious what we would do with the data if we read it
-+ * so we'll just stall it. It seems like the API isn't
-+ * quite right here.
-+ */
-+#if 0
-+ /* Here is what we would do if we did support control
-+ * write data stages.
-+ */
-+ ep0_urb->actual_length = 0;
-+ outw (0, UDC_EP_NUM);
-+ /* enable the EP0 rx FIFO */
-+ outw (UDC_Set_FIFO_En, UDC_CTRL);
-+#else
-+ /* Stall this request */
-+ UDCDBG ("Stalling unsupported EP0 control write data "
-+ "stage.");
-+ udc_stall_ep (0);
-+#endif
-+ } else {
-+ omap1510_prepare_for_control_write_status (ep0_urb);
-+ }
-+ } else {
-+ UDCDBG ("control read on EP0");
-+ /* The ep0_recv_setup function has already placed our response
-+ * packet data in ep0_urb->buffer and the packet length in
-+ * ep0_urb->actual_length.
-+ */
-+ endpoint->tx_urb = ep0_urb;
-+ endpoint->sent = 0;
-+ /* select the EP0 tx FIFO */
-+ outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM);
-+ /* Write packet data to the FIFO. omap1510_write_noniso_tx_fifo
-+ * will update endpoint->last with the number of bytes written
-+ * to the FIFO.
-+ */
-+ omap1510_write_noniso_tx_fifo (endpoint);
-+ /* enable the FIFO to start the packet transmission */
-+ outw (UDC_Set_FIFO_En, UDC_CTRL);
-+ /* deselect the EP0 tx FIFO */
-+ outw (UDC_EP_Dir, UDC_EP_NUM);
-+ }
-+
-+ UDCDBG ("<- Leaving device setup");
-+}
-+
-+/* Handle endpoint 0 RX interrupt
-+ * This routine implements TRM Figure 14-16.
-+ */
-+static void omap1510_udc_ep0_rx (struct usb_endpoint_instance *endpoint)
-+{
-+ unsigned short status;
-+
-+ UDCDBG ("RX on EP0");
-+ /* select EP0 rx FIFO */
-+ outw (UDC_EP_Sel, UDC_EP_NUM);
-+
-+ status = inw (UDC_STAT_FLG);
-+
-+ if (status & UDC_ACK) {
-+ /* Check direction */
-+ if ((ep0_urb->device_request.bmRequestType
-+ & USB_REQ_DIRECTION_MASK) == USB_REQ_HOST2DEVICE) {
-+ /* This rx interrupt must be for a control write data
-+ * stage packet.
-+ *
-+ * We don't support control write data stages.
-+ * We should never end up here.
-+ */
-+
-+ /* clear the EP0 rx FIFO */
-+ outw (UDC_Clr_EP, UDC_CTRL);
-+
-+ /* deselect the EP0 rx FIFO */
-+ outw (0, UDC_EP_NUM);
-+
-+ UDCDBG ("Stalling unexpected EP0 control write "
-+ "data stage packet");
-+ udc_stall_ep (0);
-+ } else {
-+ /* This rx interrupt must be for a control read status
-+ * stage packet.
-+ */
-+ UDCDBG ("ACK on EP0 control read status stage packet");
-+ /* deselect EP0 rx FIFO */
-+ outw (0, UDC_EP_NUM);
-+ }
-+ } else if (status & UDC_STALL) {
-+ UDCDBG ("EP0 stall during RX");
-+ /* deselect EP0 rx FIFO */
-+ outw (0, UDC_EP_NUM);
-+ } else {
-+ /* deselect EP0 rx FIFO */
-+ outw (0, UDC_EP_NUM);
-+ }
-+}
-+
-+/* Handle endpoint 0 TX interrupt
-+ * This routine implements TRM Figure 14-18.
-+ */
-+static void omap1510_udc_ep0_tx (struct usb_endpoint_instance *endpoint)
-+{
-+ unsigned short status;
-+ struct usb_device_request *request = &ep0_urb->device_request;
-+
-+ UDCDBG ("TX on EP0");
-+ /* select EP0 TX FIFO */
-+ outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM);
-+
-+ status = inw (UDC_STAT_FLG);
-+ if (status & UDC_ACK) {
-+ /* Check direction */
-+ if ((request->bmRequestType & USB_REQ_DIRECTION_MASK) ==
-+ USB_REQ_HOST2DEVICE) {
-+ /* This tx interrupt must be for a control write status
-+ * stage packet.
-+ */
-+ UDCDBG ("ACK on EP0 control write status stage packet");
-+ /* deselect EP0 TX FIFO */
-+ outw (UDC_EP_Dir, UDC_EP_NUM);
-+ } else {
-+ /* This tx interrupt must be for a control read data
-+ * stage packet.
-+ */
-+ int wLength = le16_to_cpu (request->wLength);
-+
-+ /* Update our count of bytes sent so far in this
-+ * transfer.
-+ */
-+ endpoint->sent += endpoint->last;
-+
-+ /* We are finished with this transfer if we have sent
-+ * all of the bytes in our tx urb (urb->actual_length)
-+ * unless we need a zero-length terminating packet. We
-+ * need a zero-length terminating packet if we returned
-+ * fewer bytes than were requested (wLength) by the host,
-+ * and the number of bytes we returned is an exact
-+ * multiple of the packet size endpoint->tx_packetSize.
-+ */
-+ if ((endpoint->sent == ep0_urb->actual_length)
-+ && ((ep0_urb->actual_length == wLength)
-+ || (endpoint->last !=
-+ endpoint->tx_packetSize))) {
-+ /* Done with control read data stage. */
-+ UDCDBG ("control read data stage complete");
-+ /* deselect EP0 TX FIFO */
-+ outw (UDC_EP_Dir, UDC_EP_NUM);
-+ /* select EP0 RX FIFO to prepare for control
-+ * read status stage.
-+ */
-+ outw (UDC_EP_Sel, UDC_EP_NUM);
-+ /* clear the EP0 RX FIFO */
-+ outw (UDC_Clr_EP, UDC_CTRL);
-+ /* enable the EP0 RX FIFO */
-+ outw (UDC_Set_FIFO_En, UDC_CTRL);
-+ /* deselect the EP0 RX FIFO */
-+ outw (0, UDC_EP_NUM);
-+ } else {
-+ /* We still have another packet of data to send
-+ * in this control read data stage or else we
-+ * need a zero-length terminating packet.
-+ */
-+ UDCDBG ("ACK control read data stage packet");
-+ omap1510_write_noniso_tx_fifo (endpoint);
-+ /* enable the EP0 tx FIFO to start transmission */
-+ outw (UDC_Set_FIFO_En, UDC_CTRL);
-+ /* deselect EP0 TX FIFO */
-+ outw (UDC_EP_Dir, UDC_EP_NUM);
-+ }
-+ }
-+ } else if (status & UDC_STALL) {
-+ UDCDBG ("EP0 stall during TX");
-+ /* deselect EP0 TX FIFO */
-+ outw (UDC_EP_Dir, UDC_EP_NUM);
-+ } else {
-+ /* deselect EP0 TX FIFO */
-+ outw (UDC_EP_Dir, UDC_EP_NUM);
-+ }
-+}
-+
-+/* Handle RX transaction on non-ISO endpoint.
-+ * This function implements TRM Figure 14-27.
-+ * The ep argument is a physical endpoint number for a non-ISO OUT endpoint
-+ * in the range 1 to 15.
-+ */
-+static void omap1510_udc_epn_rx (int ep)
-+{
-+ unsigned short status;
-+
-+ /* Check endpoint status */
-+ status = inw (UDC_STAT_FLG);
-+
-+ if (status & UDC_ACK) {
-+ int nbytes;
-+ struct usb_endpoint_instance *endpoint =
-+ omap1510_find_ep (ep);
-+
-+ nbytes = omap1510_read_noniso_rx_fifo (endpoint);
-+ usbd_rcv_complete (endpoint, nbytes, 0);
-+
-+ /* enable rx FIFO to prepare for next packet */
-+ outw (UDC_Set_FIFO_En, UDC_CTRL);
-+ } else if (status & UDC_STALL) {
-+ UDCDBGA ("STALL on RX endpoint %d", ep);
-+ } else if (status & UDC_NAK) {
-+ UDCDBGA ("NAK on RX ep %d", ep);
-+ } else {
-+ serial_printf ("omap-bi: RX on ep %d with status %x", ep,
-+ status);
-+ }
-+}
-+
-+/* Handle TX transaction on non-ISO endpoint.
-+ * This function implements TRM Figure 14-29.
-+ * The ep argument is a physical endpoint number for a non-ISO IN endpoint
-+ * in the range 16 to 30.
-+ */
-+static void omap1510_udc_epn_tx (int ep)
-+{
-+ unsigned short status;
-+
-+ /*serial_printf("omap1510_udc_epn_tx( %x )\n",ep); */
-+
-+ /* Check endpoint status */
-+ status = inw (UDC_STAT_FLG);
-+
-+ if (status & UDC_ACK) {
-+ struct usb_endpoint_instance *endpoint =
-+ omap1510_find_ep (ep);
-+
-+ /* We need to transmit a terminating zero-length packet now if
-+ * we have sent all of the data in this URB and the transfer
-+ * size was an exact multiple of the packet size.
-+ */
-+ if (endpoint->tx_urb
-+ && (endpoint->last == endpoint->tx_packetSize)
-+ && (endpoint->tx_urb->actual_length - endpoint->sent -
-+ endpoint->last == 0)) {
-+ /* Prepare to transmit a zero-length packet. */
-+ endpoint->sent += endpoint->last;
-+ /* write 0 bytes of data to FIFO */
-+ omap1510_write_noniso_tx_fifo (endpoint);
-+ /* enable tx FIFO to start transmission */
-+ outw (UDC_Set_FIFO_En, UDC_CTRL);
-+ } else if (endpoint->tx_urb
-+ && endpoint->tx_urb->actual_length) {
-+ /* retire the data that was just sent */
-+ usbd_tx_complete (endpoint);
-+ /* Check to see if we have more data ready to transmit
-+ * now.
-+ */
-+ if (endpoint->tx_urb
-+ && endpoint->tx_urb->actual_length) {
-+ /* write data to FIFO */
-+ omap1510_write_noniso_tx_fifo (endpoint);
-+ /* enable tx FIFO to start transmission */
-+ outw (UDC_Set_FIFO_En, UDC_CTRL);
-+ }
-+ }
-+ } else if (status & UDC_STALL) {
-+ UDCDBGA ("STALL on TX endpoint %d", ep);
-+ } else if (status & UDC_NAK) {
-+ UDCDBGA ("NAK on TX endpoint %d", ep);
-+ } else {
-+ /*serial_printf("omap-bi: TX on ep %d with status %x\n", ep, status); */
-+ }
-+}
-+
-+
-+/*
-+-------------------------------------------------------------------------------
-+*/
-+
-+/* Handle general USB interrupts and dispatch according to type.
-+ * This function implements TRM Figure 14-13.
-+ */
-+void s3c2410_udc_irq (void)
-+{
-+ u_int8_t save_idx = inb(S3C2410_UDC_INDEX_REG);
-+ u_int8_t usb_status = inb(S3C2410_UDC_USB_INT_REG);
-+ u_int8_t usbd_status = inb(S3C2410_UDC_EP_INT_REG);
-+
-+ UDCDBGA("< IRQ usbs=0x%02x, usbds=0x%02x start >", usb_status,
-+ usbd_status);
-+
-+ if (usb_status & S3C2410_UDC_USBINT_RESET) {
-+ valid_irq++;
-+ }
-+
-+ if (usb_status & S3C2410_UDC_USBINT_RESUME) {
-+ valid_irq++;
-+
-+ }
-+
-+ if (usb_status & S3C2410_UDC_USBINT_SUSPEND) {
-+ valid_irq++;
-+
-+ }
-+
-+ /* Endpoint Interrupts */
-+ if (usbd_status) {
-+ int i;
-+
-+ if (usbd_status & S3C2410_UDC_INT_EP0) {
-+ s3c2410_udc_ep0();
-+ outb(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_REG);
-+ valid_irq++;
-+ }
-+
-+ for (i = 1; i < 5; i++) {
-+ u_int32_t tmp = 1 << i;
-+
-+ if (usbd_status & tmp) {
-+ /* FIXME: Handle EP X */
-+ s3c2410_udc_epn(i);
-+ outb(tmp, S3C2410_UDC_EP_INT_REG);
-+ valid_irq++;
-+ }
-+ }
-+ }
-+ outb(save_idx, S3C2410_UDC_INDEX_REG);
-+
-+#if 0
-+ if (!(irq_src & ~UDC_SOF_Flg)) /* ignore SOF interrupts ) */
-+ return;
-+
-+ UDCDBGA ("< IRQ #%d start >- %x", udc_interrupts, irq_src);
-+ /*serial_printf("< IRQ #%d start >- %x\n", udc_interrupts, irq_src); */
-+
-+ if (irq_src & UDC_DS_Chg) {
-+ /* Device status changed */
-+ omap1510_udc_state_changed ();
-+ valid_irq++;
-+ }
-+ if (irq_src & UDC_EP0_RX) {
-+ /* Endpoint 0 receive */
-+ outw (UDC_EP0_RX, UDC_IRQ_SRC); /* ack interrupt */
-+ omap1510_udc_ep0_rx (udc_device->bus->endpoint_array + 0);
-+ valid_irq++;
-+ }
-+ if (irq_src & UDC_EP0_TX) {
-+ /* Endpoint 0 transmit */
-+ outw (UDC_EP0_TX, UDC_IRQ_SRC); /* ack interrupt */
-+ omap1510_udc_ep0_tx (udc_device->bus->endpoint_array + 0);
-+ valid_irq++;
-+ }
-+ if (irq_src & UDC_Setup) {
-+ /* Device setup */
-+ omap1510_udc_setup (udc_device->bus->endpoint_array + 0);
-+ valid_irq++;
-+ }
-+ /*if (!valid_irq) */
-+ /* serial_printf("unknown interrupt, IRQ_SRC %.4x\n", irq_src); */
-+#endif
-+ UDCDBGA ("< IRQ end >", udc_interrupts);
-+
-+ udc_interrupts++;
-+}
-+
-+/* This function implements TRM Figure 14-26. */
-+void omap1510_udc_noniso_irq (void)
-+{
-+ unsigned short epnum;
-+ unsigned short irq_src = inw (UDC_IRQ_SRC);
-+ int valid_irq = 0;
-+
-+ if (!(irq_src & (UDC_EPn_RX | UDC_EPn_TX)))
-+ return;
-+
-+ UDCDBGA ("non-ISO IRQ, IRQ_SRC %x", inw (UDC_IRQ_SRC));
-+
-+ if (irq_src & UDC_EPn_RX) { /* Endpoint N OUT transaction */
-+ /* Determine the endpoint number for this interrupt */
-+ epnum = (inw (UDC_EPN_STAT) & 0x0f00) >> 8;
-+ UDCDBGA ("RX on ep %x", epnum);
-+
-+ /* acknowledge interrupt */
-+ outw (UDC_EPn_RX, UDC_IRQ_SRC);
-+
-+ if (epnum) {
-+ /* select the endpoint FIFO */
-+ outw (UDC_EP_Sel | epnum, UDC_EP_NUM);
-+
-+ omap1510_udc_epn_rx (epnum);
-+
-+ /* deselect the endpoint FIFO */
-+ outw (epnum, UDC_EP_NUM);
-+ }
-+ valid_irq++;
-+ }
-+ if (irq_src & UDC_EPn_TX) { /* Endpoint N IN transaction */
-+ /* Determine the endpoint number for this interrupt */
-+ epnum = (inw (UDC_EPN_STAT) & 0x000f) | USB_DIR_IN;
-+ UDCDBGA ("TX on ep %x", epnum);
-+
-+ /* acknowledge interrupt */
-+ outw (UDC_EPn_TX, UDC_IRQ_SRC);
-+
-+ if (epnum) {
-+ /* select the endpoint FIFO */
-+ outw (UDC_EP_Sel | UDC_EP_Dir | epnum, UDC_EP_NUM);
-+
-+ omap1510_udc_epn_tx (epnum);
-+
-+ /* deselect the endpoint FIFO */
-+ outw (UDC_EP_Dir | epnum, UDC_EP_NUM);
-+ }
-+ valid_irq++;
-+ }
-+ if (!valid_irq)
-+ serial_printf (": unknown non-ISO interrupt, IRQ_SRC %.4x\n",
-+ irq_src);
-+}
-+
-+/*
-+-------------------------------------------------------------------------------
-+*/
-+
-+
-+/*
-+ * Start of public functions.
-+ */
-+
-+/* Called to start packet transmission. */
-+void udc_endpoint_write (struct usb_endpoint_instance *endpoint)
-+{
-+ unsigned short epnum =
-+ endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK;
-+
-+ UDCDBGA ("Starting transmit on ep %x", epnum);
-+
-+ if (endpoint->tx_urb) {
-+ /* select the endpoint FIFO */
-+ outw (UDC_EP_Sel | UDC_EP_Dir | epnum, UDC_EP_NUM);
-+ /* write data to FIFO */
-+ omap1510_write_noniso_tx_fifo (endpoint);
-+ /* enable tx FIFO to start transmission */
-+ outw (UDC_Set_FIFO_En, UDC_CTRL);
-+ /* deselect the endpoint FIFO */
-+ outw (UDC_EP_Dir | epnum, UDC_EP_NUM);
-+ }
-+}
-+
-+/* Start to initialize h/w stuff */
-+int udc_init (void)
-+{
-+ u16 udc_rev;
-+ uchar value;
-+ ulong gpio;
-+ int i;
-+
-+ /* Let the device settle down before we start */
-+ for (i = 0; i < UDC_INIT_MDELAY; i++) udelay(1000);
-+
-+ udc_device = NULL;
-+
-+ UDCDBG ("starting");
-+
-+ /* Check peripheral reset. Must be 1 to make sure
-+ MPU TIPB peripheral reset is inactive */
-+ UDCREG (ARM_RSTCT2);
-+
-+ /* Set and check clock control.
-+ * We might ought to be using the clock control API to do
-+ * this instead of fiddling with the clock registers directly
-+ * here.
-+ */
-+ outw ((1 << 4) | (1 << 5), CLOCK_CTRL);
-+ UDCREG (CLOCK_CTRL);
-+ /* Set and check APLL */
-+ outw (0x0008, APLL_CTRL);
-+ UDCREG (APLL_CTRL);
-+ /* Set and check DPLL */
-+ outw (0x2210, DPLL_CTRL);
-+ UDCREG (DPLL_CTRL);
-+ /* Set and check SOFT */
-+ outw ((1 << 4) | (1 << 3) | 1, SOFT_REQ);
-+ /* Short delay to wait for DPLL */
-+ udelay (1000);
-+
-+ /* Print banner with device revision */
-+ udc_rev = inw (UDC_REV) & 0xff;
-+ printf ("USB: TI OMAP1510 USB function module rev %d.%d\n",
-+ udc_rev >> 4, udc_rev & 0xf);
-+
-+#ifdef CONFIG_OMAP_SX1
-+ i2c_read (0x32, 0x04, 1, &value, 1);
-+ value |= 0x04;
-+ i2c_write (0x32, 0x04, 1, &value, 1);
-+
-+ i2c_read (0x32, 0x03, 1, &value, 1);
-+ value |= 0x01;
-+ i2c_write (0x32, 0x03, 1, &value, 1);
-+
-+ gpio = inl(GPIO_PIN_CONTROL_REG);
-+ gpio |= 0x0002; /* A_IRDA_OFF */
-+ gpio |= 0x0800; /* A_SWITCH */
-+ gpio |= 0x8000; /* A_USB_ON */
-+ outl (gpio, GPIO_PIN_CONTROL_REG);
-+
-+ gpio = inl(GPIO_DIR_CONTROL_REG);
-+ gpio &= ~0x0002; /* A_IRDA_OFF */
-+ gpio &= ~0x0800; /* A_SWITCH */
-+ gpio &= ~0x8000; /* A_USB_ON */
-+ outl (gpio, GPIO_DIR_CONTROL_REG);
-+
-+ gpio = inl(GPIO_DATA_OUTPUT_REG);
-+ gpio |= 0x0002; /* A_IRDA_OFF */
-+ gpio &= ~0x0800; /* A_SWITCH */
-+ gpio &= ~0x8000; /* A_USB_ON */
-+ outl (gpio, GPIO_DATA_OUTPUT_REG);
-+#endif
-+
-+ /* The VBUS_MODE bit selects whether VBUS detection is done via
-+ * software (1) or hardware (0). When software detection is
-+ * selected, VBUS_CTRL selects whether USB is not connected (0)
-+ * or connected (1).
-+ */
-+ outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_MODE, FUNC_MUX_CTRL_0);
-+ outl (inl (FUNC_MUX_CTRL_0) & ~UDC_VBUS_CTRL, FUNC_MUX_CTRL_0);
-+ UDCREGL (FUNC_MUX_CTRL_0);
-+
-+ /*
-+ * At this point, device is ready for configuration...
-+ */
-+
-+ UDCDBG ("disable USB interrupts");
-+ outw (0, UDC_IRQ_EN);
-+ UDCREG (UDC_IRQ_EN);
-+
-+ UDCDBG ("disable USB DMA");
-+ outw (0, UDC_DMA_IRQ_EN);
-+ UDCREG (UDC_DMA_IRQ_EN);
-+
-+ UDCDBG ("initialize SYSCON1");
-+ outw (UDC_Self_Pwr | UDC_Pullup_En, UDC_SYSCON1);
-+ UDCREG (UDC_SYSCON1);
-+
-+ return 0;
-+}
-+
-+/* Stall endpoint */
-+static void udc_stall_ep (unsigned int ep_addr)
-+{
-+ /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */
-+ int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
-+
-+ UDCDBGA ("stall ep_addr %d", ep_addr);
-+
-+ /* REVISIT?
-+ * The OMAP TRM section 14.2.4.2 says we must check that the FIFO
-+ * is empty before halting the endpoint. The current implementation
-+ * doesn't check that the FIFO is empty.
-+ */
-+
-+ if (!ep_num) {
-+ outw (UDC_Stall_Cmd, UDC_SYSCON2);
-+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) {
-+ if (inw (UDC_EP_RX (ep_num)) & UDC_EPn_RX_Valid) {
-+ /* we have a valid rx endpoint, so halt it */
-+ outw (UDC_EP_Sel | ep_num, UDC_EP_NUM);
-+ outw (UDC_Set_Halt, UDC_CTRL);
-+ outw (ep_num, UDC_EP_NUM);
-+ }
-+ } else {
-+ if (inw (UDC_EP_TX (ep_num)) & UDC_EPn_TX_Valid) {
-+ /* we have a valid tx endpoint, so halt it */
-+ outw (UDC_EP_Sel | UDC_EP_Dir | ep_num, UDC_EP_NUM);
-+ outw (UDC_Set_Halt, UDC_CTRL);
-+ outw (ep_num, UDC_EP_NUM);
-+ }
-+ }
-+}
-+
-+/* Reset endpoint */
-+#if 0
-+static void udc_reset_ep (unsigned int ep_addr)
-+{
-+ /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */
-+ int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
-+
-+ UDCDBGA ("reset ep_addr %d", ep_addr);
-+
-+ if (!ep_num) {
-+ /* control endpoint 0 can't be reset */
-+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) {
-+ UDCDBGA ("UDC_EP_RX(%d) = 0x%04x", ep_num,
-+ inw (UDC_EP_RX (ep_num)));
-+ if (inw (UDC_EP_RX (ep_num)) & UDC_EPn_RX_Valid) {
-+ /* we have a valid rx endpoint, so reset it */
-+ outw (ep_num | UDC_EP_Sel, UDC_EP_NUM);
-+ outw (UDC_Reset_EP, UDC_CTRL);
-+ outw (ep_num, UDC_EP_NUM);
-+ UDCDBGA ("OUT endpoint %d reset", ep_num);
-+ }
-+ } else {
-+ UDCDBGA ("UDC_EP_TX(%d) = 0x%04x", ep_num,
-+ inw (UDC_EP_TX (ep_num)));
-+ /* Resetting of tx endpoints seems to be causing the USB function
-+ * module to fail, which causes problems when the driver is
-+ * uninstalled. We'll skip resetting tx endpoints for now until
-+ * we figure out what the problem is.
-+ */
-+#if 0
-+ if (inw (UDC_EP_TX (ep_num)) & UDC_EPn_TX_Valid) {
-+ /* we have a valid tx endpoint, so reset it */
-+ outw (ep_num | UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM);
-+ outw (UDC_Reset_EP, UDC_CTRL);
-+ outw (ep_num | UDC_EP_Dir, UDC_EP_NUM);
-+ UDCDBGA ("IN endpoint %d reset", ep_num);
-+ }
-+#endif
-+ }
-+}
-+#endif
-+
-+/* ************************************************************************** */
-+
-+/**
-+ * udc_check_ep - check logical endpoint
-+ *
-+ * Return physical endpoint number to use for this logical endpoint or zero if not valid.
-+ */
-+#if 0
-+int udc_check_ep (int logical_endpoint, int packetsize)
-+{
-+ if ((logical_endpoint == 0x80) ||
-+ ((logical_endpoint & 0x8f) != logical_endpoint)) {
-+ return 0;
-+ }
-+
-+ switch (packetsize) {
-+ case 8:
-+ case 16:
-+ case 32:
-+ case 64:
-+ case 128:
-+ case 256:
-+ case 512:
-+ break;
-+ default:
-+ return 0;
-+ }
-+
-+ return EP_ADDR_TO_PHYS_EP (logical_endpoint);
-+}
-+#endif
-+
-+/*
-+ * udc_setup_ep - setup endpoint
-+ *
-+ * Associate a physical endpoint with endpoint_instance
-+ */
-+void udc_setup_ep (struct usb_device_instance *device,
-+ unsigned int ep, struct usb_endpoint_instance *endpoint)
-+{
-+ UDCDBGA ("setting up endpoint addr %x", endpoint->endpoint_address);
-+
-+ /* This routine gets called by bi_modinit for endpoint 0 and from
-+ * bi_config for all of the other endpoints. bi_config gets called
-+ * during the DEVICE_CREATE, DEVICE_CONFIGURED, and
-+ * DEVICE_SET_INTERFACE events. We need to reconfigure the OMAP packet
-+ * RAM after bi_config scans the selected device configuration and
-+ * initializes the endpoint structures, but before this routine enables
-+ * the OUT endpoint FIFOs. Since bi_config calls this routine in a
-+ * loop for endpoints 1 through UDC_MAX_ENDPOINTS, we reconfigure our
-+ * packet RAM here when ep==1.
-+ * I really hate to do this here, but it seems like the API exported
-+ * by the USB bus interface controller driver to the usbd-bi module
-+ * isn't quite right so there is no good place to do this.
-+ */
-+ if (ep == 1) {
-+ omap1510_deconfigure_device ();
-+ omap1510_configure_device (device);
-+ }
-+
-+ if (endpoint && (ep < UDC_MAX_ENDPOINTS)) {
-+ int ep_addr = endpoint->endpoint_address;
-+
-+ if (!ep_addr) {
-+ /* nothing to do for endpoint 0 */
-+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
-+ /* nothing to do for IN (tx) endpoints */
-+ } else { /* OUT (rx) endpoint */
-+ if (endpoint->rcv_packetSize) {
-+ /*struct urb* urb = &(urb_out_array[ep&0xFF]); */
-+ /*urb->endpoint = endpoint; */
-+ /*urb->device = device; */
-+ /*urb->buffer_length = sizeof(urb->buffer); */
-+
-+ /*endpoint->rcv_urb = urb; */
-+ omap1510_prepare_endpoint_for_rx (ep_addr);
-+ }
-+ }
-+ }
-+}
-+
-+/**
-+ * udc_disable_ep - disable endpoint
-+ * @ep:
-+ *
-+ * Disable specified endpoint
-+ */
-+#if 0
-+void udc_disable_ep (unsigned int ep_addr)
-+{
-+ /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */
-+ int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
-+ struct usb_endpoint_instance *endpoint = omap1510_find_ep (ep_addr); /*udc_device->bus->endpoint_array + ep; */
-+
-+ UDCDBGA ("disable ep_addr %d", ep_addr);
-+
-+ if (!ep_num) {
-+ /* nothing to do for endpoint 0 */ ;
-+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
-+ if (endpoint->tx_packetSize) {
-+ /* we have a valid tx endpoint */
-+ /*usbd_flush_tx(endpoint); */
-+ endpoint->tx_urb = NULL;
-+ }
-+ } else {
-+ if (endpoint->rcv_packetSize) {
-+ /* we have a valid rx endpoint */
-+ /*usbd_flush_rcv(endpoint); */
-+ endpoint->rcv_urb = NULL;
-+ }
-+ }
-+}
-+#endif
-+
-+/* ************************************************************************** */
-+
-+/**
-+ * udc_connected - is the USB cable connected
-+ *
-+ * Return non-zero if cable is connected.
-+ */
-+#if 0
-+int udc_connected (void)
-+{
-+ return ((inw (UDC_DEVSTAT) & UDC_ATT) == UDC_ATT);
-+}
-+#endif
-+
-+/* Turn on the USB connection by enabling the pullup resistor */
-+void udc_connect (void)
-+{
-+ UDCDBG ("connect, enable Pullup");
-+}
-+
-+/* Turn off the USB connection by disabling the pullup resistor */
-+void udc_disconnect (void)
-+{
-+ UDCDBG ("disconnect, disable Pullup");
-+}
-+
-+/* ************************************************************************** */
-+
-+
-+/*
-+ * udc_disable_interrupts - disable interrupts
-+ * switch off interrupts
-+ */
-+#if 0
-+void udc_disable_interrupts (struct usb_device_instance *device)
-+{
-+ UDCDBG ("disabling all interrupts");
-+ outw (0, UDC_IRQ_EN);
-+}
-+#endif
-+
-+/* ************************************************************************** */
-+
-+/**
-+ * udc_ep0_packetsize - return ep0 packetsize
-+ */
-+#if 0
-+int udc_ep0_packetsize (void)
-+{
-+ return EP0_PACKETSIZE;
-+}
-+#endif
-+
-+/* Switch on the UDC */
-+void udc_enable (struct usb_device_instance *device)
-+{
-+ UDCDBGA ("enable device %p, status %d", device, device->status);
-+
-+ /* initialize driver state variables */
-+ udc_devstat = 0;
-+
-+ /* Save the device structure pointer */
-+ udc_device = device;
-+
-+ /* Setup ep0 urb */
-+ if (!ep0_urb) {
-+ ep0_urb =
-+ usbd_alloc_urb (udc_device,
-+ udc_device->bus->endpoint_array);
-+ } else {
-+ serial_printf ("udc_enable: ep0_urb already allocated %p\n",
-+ ep0_urb);
-+ }
-+
-+#ifdef FIXME
-+ /* The VBUS_MODE bit selects whether VBUS detection is done via
-+ * software (1) or hardware (0). When software detection is
-+ * selected, VBUS_CTRL selects whether USB is not connected (0)
-+ * or connected (1).
-+ */
-+ outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_CTRL | UDC_VBUS_MODE,
-+ FUNC_MUX_CTRL_0);
-+ UDCREGL (FUNC_MUX_CTRL_0);
-+#endif
-+
-+ s3c2410_configure_device(device);
-+}
-+
-+/* Switch off the UDC */
-+void udc_disable (void)
-+{
-+ UDCDBG ("disable UDC");
-+
-+ s3c2410_deconfigure_device();
-+
-+#ifdef FIXME
-+ /* The VBUS_MODE bit selects whether VBUS detection is done via
-+ * software (1) or hardware (0). When software detection is
-+ * selected, VBUS_CTRL selects whether USB is not connected (0)
-+ * or connected (1).
-+ */
-+ outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_MODE, FUNC_MUX_CTRL_0);
-+ outl (inl (FUNC_MUX_CTRL_0) & ~UDC_VBUS_CTRL, FUNC_MUX_CTRL_0);
-+ UDCREGL (FUNC_MUX_CTRL_0);
-+#endif
-+
-+ /* Free ep0 URB */
-+ if (ep0_urb) {
-+ /*usbd_dealloc_urb(ep0_urb); */
-+ ep0_urb = NULL;
-+ }
-+
-+ /* Reset device pointer.
-+ * We ought to do this here to balance the initialization of udc_device
-+ * in udc_enable, but some of our other exported functions get called
-+ * by the bus interface driver after udc_disable, so we have to hang on
-+ * to the device pointer to avoid a null pointer dereference. */
-+ /* udc_device = NULL; */
-+}
-+
-+/**
-+ * udc_startup - allow udc code to do any additional startup
-+ */
-+void udc_startup_events (struct usb_device_instance *device)
-+{
-+ /* The DEVICE_INIT event puts the USB device in the state STATE_INIT. */
-+ usbd_device_event_irq (device, DEVICE_INIT, 0);
-+
-+ /* The DEVICE_CREATE event puts the USB device in the state
-+ * STATE_ATTACHED.
-+ */
-+ usbd_device_event_irq (device, DEVICE_CREATE, 0);
-+
-+ /* Some USB controller driver implementations signal
-+ * DEVICE_HUB_CONFIGURED and DEVICE_RESET events here.
-+ * DEVICE_HUB_CONFIGURED causes a transition to the state STATE_POWERED,
-+ * and DEVICE_RESET causes a transition to the state STATE_DEFAULT.
-+ * The OMAP USB client controller has the capability to detect when the
-+ * USB cable is connected to a powered USB bus via the ATT bit in the
-+ * DEVSTAT register, so we will defer the DEVICE_HUB_CONFIGURED and
-+ * DEVICE_RESET events until later.
-+ */
-+
-+ udc_enable (device);
-+}
-+
-+#endif
-diff --git a/examples/Makefile b/examples/Makefile
-index a342d75..082e52e 100644
---- a/examples/Makefile
-+++ b/examples/Makefile
-@@ -60,7 +60,7 @@ endif
- include $(TOPDIR)/config.mk
-
- SREC = hello_world.srec
--BIN = hello_world.bin hello_world
-+BIN = hello_world hello_world.bin
-
- ifeq ($(CPU),mpc8xx)
- SREC = test_burst.srec
-@@ -122,7 +122,7 @@ clibdir := $(shell dirname `$(CC) $(CFLA
-
- CPPFLAGS += -I..
-
--all: .depend $(OBJS) $(LIB) $(SREC) $(BIN)
-+all: .depend $(OBJS) $(LIB) $(BIN) $(SREC)
-
- #########################################################################
- $(LIB): .depend $(LIBOBJS)
-diff --git a/include/asm-arm/arch-s3c24x0/mmc.h b/include/asm-arm/arch-s3c24x0/mmc.h
-new file mode 100644
-index 0000000..d9178f3
---- /dev/null
-+++ b/include/asm-arm/arch-s3c24x0/mmc.h
-@@ -0,0 +1,112 @@
-+/*
-+ * linux/drivers/mmc/mmc_pxa.h
-+ *
-+ * Author: Vladimir Shebordaev, Igor Oblakov
-+ * Copyright: MontaVista Software Inc.
-+ *
-+ * $Id: mmc_pxa.h,v 0.3.1.6 2002/09/25 19:25:48 ted Exp ted $
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __MMC_PXA_P_H__
-+#define __MMC_PXA_P_H__
-+
-+#include <asm/arch/regs-sdi.h>
-+
-+#define MMC_DEFAULT_RCA (1<<16)
-+
-+#define MMC_BLOCK_SIZE 512
-+#define MMC_CMD_RESET 0
-+#define MMC_CMD_SEND_OP_COND 1
-+#define MMC_CMD_ALL_SEND_CID 2
-+#define MMC_CMD_SET_RCA 3
-+#define MMC_CMD_SELECT_CARD 7
-+#define MMC_CMD_SEND_CSD 9
-+#define MMC_CMD_SEND_CID 10
-+#define MMC_CMD_SEND_STATUS 13
-+#define MMC_CMD_SET_BLOCKLEN 16
-+#define MMC_CMD_READ_BLOCK 17
-+#define MMC_CMD_RD_BLK_MULTI 18
-+#define MMC_CMD_WRITE_BLOCK 24
-+
-+#define MMC_MAX_BLOCK_SIZE 512
-+
-+#define MMC_R1_IDLE_STATE 0x01
-+#define MMC_R1_ERASE_STATE 0x02
-+#define MMC_R1_ILLEGAL_CMD 0x04
-+#define MMC_R1_COM_CRC_ERR 0x08
-+#define MMC_R1_ERASE_SEQ_ERR 0x01
-+#define MMC_R1_ADDR_ERR 0x02
-+#define MMC_R1_PARAM_ERR 0x04
-+
-+#define MMC_R1B_WP_ERASE_SKIP 0x0002
-+#define MMC_R1B_ERR 0x0004
-+#define MMC_R1B_CC_ERR 0x0008
-+#define MMC_R1B_CARD_ECC_ERR 0x0010
-+#define MMC_R1B_WP_VIOLATION 0x0020
-+#define MMC_R1B_ERASE_PARAM 0x0040
-+#define MMC_R1B_OOR 0x0080
-+#define MMC_R1B_IDLE_STATE 0x0100
-+#define MMC_R1B_ERASE_RESET 0x0200
-+#define MMC_R1B_ILLEGAL_CMD 0x0400
-+#define MMC_R1B_COM_CRC_ERR 0x0800
-+#define MMC_R1B_ERASE_SEQ_ERR 0x1000
-+#define MMC_R1B_ADDR_ERR 0x2000
-+#define MMC_R1B_PARAM_ERR 0x4000
-+
-+typedef struct mmc_cid
-+{
-+/* FIXME: BYTE_ORDER */
-+ uchar year:4,
-+ month:4;
-+ uchar sn[3];
-+ uchar fwrev:4,
-+ hwrev:4;
-+ uchar name[6];
-+ uchar id[3];
-+} mmc_cid_t;
-+
-+typedef struct mmc_csd
-+{
-+ uchar ecc:2,
-+ file_format:2,
-+ tmp_write_protect:1,
-+ perm_write_protect:1,
-+ copy:1,
-+ file_format_grp:1;
-+ uint64_t content_prot_app:1,
-+ rsvd3:4,
-+ write_bl_partial:1,
-+ write_bl_len:4,
-+ r2w_factor:3,
-+ default_ecc:2,
-+ wp_grp_enable:1,
-+ wp_grp_size:5,
-+ erase_grp_mult:5,
-+ erase_grp_size:5,
-+ c_size_mult1:3,
-+ vdd_w_curr_max:3,
-+ vdd_w_curr_min:3,
-+ vdd_r_curr_max:3,
-+ vdd_r_curr_min:3,
-+ c_size:12,
-+ rsvd2:2,
-+ dsr_imp:1,
-+ read_blk_misalign:1,
-+ write_blk_misalign:1,
-+ read_bl_partial:1;
-+
-+ ushort read_bl_len:4,
-+ ccc:12;
-+ uchar tran_speed;
-+ uchar nsac;
-+ uchar taac;
-+ uchar rsvd1:2,
-+ spec_vers:4,
-+ csd_structure:2;
-+} mmc_csd_t;
-+
-+
-+#endif /* __MMC_PXA_P_H__ */
-diff --git a/include/asm-arm/arch-s3c24x0/regs-sdi.h b/include/asm-arm/arch-s3c24x0/regs-sdi.h
-new file mode 100644
-index 0000000..9b5b9d1
---- /dev/null
-+++ b/include/asm-arm/arch-s3c24x0/regs-sdi.h
-@@ -0,0 +1,110 @@
-+/* linux/include/asm/arch-s3c2410/regs-sdi.h
-+ *
-+ * Copyright (c) 2004 Simtec Electronics <linux at simtec.co.uk>
-+ * http://www.simtec.co.uk/products/SWLINUX/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * S3C2410 MMC/SDIO register definitions
-+ *
-+ * Changelog:
-+ * 18-Aug-2004 Ben Dooks Created initial file
-+ * 29-Nov-2004 Koen Martens Added some missing defines, fixed duplicates
-+ * 29-Nov-2004 Ben Dooks Updated Koen's patch
-+*/
-+
-+#ifndef __ASM_ARM_REGS_SDI
-+#define __ASM_ARM_REGS_SDI "regs-sdi.h"
-+
-+#define S3C2440_SDICON_SDRESET (1<<8)
-+#define S3C2440_SDICON_MMCCLOCK (1<<5)
-+#define S3C2410_SDICON_BYTEORDER (1<<4)
-+#define S3C2410_SDICON_SDIOIRQ (1<<3)
-+#define S3C2410_SDICON_RWAITEN (1<<2)
-+#define S3C2410_SDICON_FIFORESET (1<<1)
-+#define S3C2410_SDICON_CLOCKTYPE (1<<0)
-+
-+#define S3C2410_SDICMDCON_ABORT (1<<12)
-+#define S3C2410_SDICMDCON_WITHDATA (1<<11)
-+#define S3C2410_SDICMDCON_LONGRSP (1<<10)
-+#define S3C2410_SDICMDCON_WAITRSP (1<<9)
-+#define S3C2410_SDICMDCON_CMDSTART (1<<8)
-+#define S3C2410_SDICMDCON_SENDERHOST (1<<6)
-+#define S3C2410_SDICMDCON_INDEX (0x3f)
-+
-+#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12)
-+#define S3C2410_SDICMDSTAT_CMDSENT (1<<11)
-+#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10)
-+#define S3C2410_SDICMDSTAT_RSPFIN (1<<9)
-+#define S3C2410_SDICMDSTAT_XFERING (1<<8)
-+#define S3C2410_SDICMDSTAT_INDEX (0xff)
-+
-+#define S3C2440_SDIDCON_DS_BYTE (0<<22)
-+#define S3C2440_SDIDCON_DS_HALFWORD (1<<22)
-+#define S3C2440_SDIDCON_DS_WORD (2<<22)
-+#define S3C2410_SDIDCON_IRQPERIOD (1<<21)
-+#define S3C2410_SDIDCON_TXAFTERRESP (1<<20)
-+#define S3C2410_SDIDCON_RXAFTERCMD (1<<19)
-+#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18)
-+#define S3C2410_SDIDCON_BLOCKMODE (1<<17)
-+#define S3C2410_SDIDCON_WIDEBUS (1<<16)
-+#define S3C2410_SDIDCON_DMAEN (1<<15)
-+#define S3C2410_SDIDCON_STOP (1<<14)
-+#define S3C2440_SDIDCON_DATSTART (1<<14)
-+#define S3C2410_SDIDCON_DATMODE (3<<12)
-+#define S3C2410_SDIDCON_BLKNUM (0x7ff)
-+
-+/* constants for S3C2410_SDIDCON_DATMODE */
-+#define S3C2410_SDIDCON_XFER_READY (0<<12)
-+#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12)
-+#define S3C2410_SDIDCON_XFER_RXSTART (2<<12)
-+#define S3C2410_SDIDCON_XFER_TXSTART (3<<12)
-+
-+#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF)
-+#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12)
-+
-+#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10)
-+#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9)
-+#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */
-+#define S3C2410_SDIDSTA_CRCFAIL (1<<7)
-+#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6)
-+#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5)
-+#define S3C2410_SDIDSTA_XFERFINISH (1<<4)
-+#define S3C2410_SDIDSTA_BUSYFINISH (1<<3)
-+#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */
-+#define S3C2410_SDIDSTA_TXDATAON (1<<1)
-+#define S3C2410_SDIDSTA_RXDATAON (1<<0)
-+
-+#define S3C2440_SDIFSTA_FIFORESET (1<<16)
-+#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */
-+#define S3C2410_SDIFSTA_TFDET (1<<13)
-+#define S3C2410_SDIFSTA_RFDET (1<<12)
-+#define S3C2410_SDIFSTA_TFHALF (1<<11)
-+#define S3C2410_SDIFSTA_TFEMPTY (1<<10)
-+#define S3C2410_SDIFSTA_RFLAST (1<<9)
-+#define S3C2410_SDIFSTA_RFFULL (1<<8)
-+#define S3C2410_SDIFSTA_RFHALF (1<<7)
-+#define S3C2410_SDIFSTA_COUNTMASK (0x7f)
-+
-+#define S3C2410_SDIIMSK_RESPONSECRC (1<<17)
-+#define S3C2410_SDIIMSK_CMDSENT (1<<16)
-+#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15)
-+#define S3C2410_SDIIMSK_RESPONSEND (1<<14)
-+#define S3C2410_SDIIMSK_READWAIT (1<<13)
-+#define S3C2410_SDIIMSK_SDIOIRQ (1<<12)
-+#define S3C2410_SDIIMSK_FIFOFAIL (1<<11)
-+#define S3C2410_SDIIMSK_CRCSTATUS (1<<10)
-+#define S3C2410_SDIIMSK_DATACRC (1<<9)
-+#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8)
-+#define S3C2410_SDIIMSK_DATAFINISH (1<<7)
-+#define S3C2410_SDIIMSK_BUSYFINISH (1<<6)
-+#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */
-+#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4)
-+#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3)
-+#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2)
-+#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1)
-+#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0)
-+
-+#endif /* __ASM_ARM_REGS_SDI */
-diff --git a/include/asm-arm/mach-types.h b/include/asm-arm/mach-types.h
-index 7d7888e..4e9c6d9 100644
---- a/include/asm-arm/mach-types.h
-+++ b/include/asm-arm/mach-types.h
-@@ -424,7 +424,7 @@ #define MACH_TYPE_MT02 4
- #define MACH_TYPE_MPORT3S 411
- #define MACH_TYPE_RA_ALPHA 412
- #define MACH_TYPE_XCEP 413
--#define MACH_TYPE_ARCOM_MERCURY 414
-+#define MACH_TYPE_ARCOM_VULCAN 414
- #define MACH_TYPE_STARGATE 415
- #define MACH_TYPE_ARMADILLOJ 416
- #define MACH_TYPE_ELROY_JACK 417
-@@ -457,7 +457,7 @@ #define MACH_TYPE_ESL_SARVA 4
- #define MACH_TYPE_XM250 444
- #define MACH_TYPE_T6TC1XB 445
- #define MACH_TYPE_ESS710 446
--#define MACH_TYPE_MX3ADS 447
-+#define MACH_TYPE_MX31ADS 447
- #define MACH_TYPE_HIMALAYA 448
- #define MACH_TYPE_BOLFENK 449
- #define MACH_TYPE_AT91RM9200KR 450
-@@ -736,7 +736,308 @@ #define MACH_TYPE_ADSPORTAL 7
- #define MACH_TYPE_LN2410SBC 725
- #define MACH_TYPE_CB3RUFC 726
- #define MACH_TYPE_MP2USB 727
--#define MACH_TYPE_PDNB3 1002
-+#define MACH_TYPE_NTNP425C 728
-+#define MACH_TYPE_COLIBRI 729
-+#define MACH_TYPE_PCM7220 730
-+#define MACH_TYPE_GATEWAY7001 731
-+#define MACH_TYPE_PCM027 732
-+#define MACH_TYPE_CMPXA 733
-+#define MACH_TYPE_ANUBIS 734
-+#define MACH_TYPE_ITE8152 735
-+#define MACH_TYPE_LPC3XXX 736
-+#define MACH_TYPE_PUPPETEER 737
-+#define MACH_TYPE_MACH_VADATECH 738
-+#define MACH_TYPE_E570 739
-+#define MACH_TYPE_X50 740
-+#define MACH_TYPE_RECON 741
-+#define MACH_TYPE_XBOARDGP8 742
-+#define MACH_TYPE_FPIC2 743
-+#define MACH_TYPE_AKITA 744
-+#define MACH_TYPE_A81 745
-+#define MACH_TYPE_SVM_SC25X 746
-+#define MACH_TYPE_VADATECH020 747
-+#define MACH_TYPE_TLI 748
-+#define MACH_TYPE_EDB9315LC 749
-+#define MACH_TYPE_PASSEC 750
-+#define MACH_TYPE_DS_TIGER 751
-+#define MACH_TYPE_E310 752
-+#define MACH_TYPE_E330 753
-+#define MACH_TYPE_RT3000 754
-+#define MACH_TYPE_NOKIA770 755
-+#define MACH_TYPE_PNX0106 756
-+#define MACH_TYPE_HX21XX 757
-+#define MACH_TYPE_FARADAY 758
-+#define MACH_TYPE_SBC9312 759
-+#define MACH_TYPE_BATMAN 760
-+#define MACH_TYPE_JPD201 761
-+#define MACH_TYPE_MIPSA 762
-+#define MACH_TYPE_KACOM 763
-+#define MACH_TYPE_SWARCOCPU 764
-+#define MACH_TYPE_SWARCODSL 765
-+#define MACH_TYPE_BLUEANGEL 766
-+#define MACH_TYPE_HAIRYGRAMA 767
-+#define MACH_TYPE_BANFF 768
-+#define MACH_TYPE_CARMEVA 769
-+#define MACH_TYPE_SAM255 770
-+#define MACH_TYPE_PPM10 771
-+#define MACH_TYPE_EDB9315A 772
-+#define MACH_TYPE_SUNSET 773
-+#define MACH_TYPE_STARGATE2 774
-+#define MACH_TYPE_INTELMOTE2 775
-+#define MACH_TYPE_TRIZEPS4 776
-+#define MACH_TYPE_MAINSTONE2 777
-+#define MACH_TYPE_EZ_IXP42X 778
-+#define MACH_TYPE_TAPWAVE_ZODIAC 779
-+#define MACH_TYPE_UNIVERSALMETER 780
-+#define MACH_TYPE_HICOARM9 781
-+#define MACH_TYPE_PNX4008 782
-+#define MACH_TYPE_KWS6000 783
-+#define MACH_TYPE_PORTUX920T 784
-+#define MACH_TYPE_EZ_X5 785
-+#define MACH_TYPE_OMAP_RUDOLPH 786
-+#define MACH_TYPE_CPUAT91 787
-+#define MACH_TYPE_REA9200 788
-+#define MACH_TYPE_ACTS_PUNE_SA1110 789
-+#define MACH_TYPE_IXP425 790
-+#define MACH_TYPE_ARGONPLUSODYSSEY 791
-+#define MACH_TYPE_PERCH 792
-+#define MACH_TYPE_EIS05R1 793
-+#define MACH_TYPE_PEPPERPAD 794
-+#define MACH_TYPE_SB3010 795
-+#define MACH_TYPE_RM9200 796
-+#define MACH_TYPE_DMA03 797
-+#define MACH_TYPE_ROAD_S101 798
-+#define MACH_TYPE_IQ_NEXTGEN_A 799
-+#define MACH_TYPE_IQ_NEXTGEN_B 800
-+#define MACH_TYPE_IQ_NEXTGEN_C 801
-+#define MACH_TYPE_IQ_NEXTGEN_D 802
-+#define MACH_TYPE_IQ_NEXTGEN_E 803
-+#define MACH_TYPE_MALLOW_AT91 804
-+#define MACH_TYPE_CYBERTRACKER_I 805
-+#define MACH_TYPE_GESBC931X 806
-+#define MACH_TYPE_CENTIPAD 807
-+#define MACH_TYPE_ARMSOC 808
-+#define MACH_TYPE_SE4200 809
-+#define MACH_TYPE_EMS197A 810
-+#define MACH_TYPE_MICRO9 811
-+#define MACH_TYPE_MICRO9L 812
-+#define MACH_TYPE_UC5471DSP 813
-+#define MACH_TYPE_SJ5471ENG 814
-+#define MACH_TYPE_CMPXA26X 815
-+#define MACH_TYPE_NC 816
-+#define MACH_TYPE_OMAP_PALMTE 817
-+#define MACH_TYPE_AJAX52X 818
-+#define MACH_TYPE_SIRIUSTAR 819
-+#define MACH_TYPE_IODATA_HDLG 820
-+#define MACH_TYPE_AT91RM9200UTL 821
-+#define MACH_TYPE_BIOSAFE 822
-+#define MACH_TYPE_MP1000 823
-+#define MACH_TYPE_PARSY 824
-+#define MACH_TYPE_CCXP 825
-+#define MACH_TYPE_OMAP_GSAMPLE 826
-+#define MACH_TYPE_REALVIEW_EB 827
-+#define MACH_TYPE_SAMOA 828
-+#define MACH_TYPE_T3XSCALE 829
-+#define MACH_TYPE_I878 830
-+#define MACH_TYPE_BORZOI 831
-+#define MACH_TYPE_GECKO 832
-+#define MACH_TYPE_DS101 833
-+#define MACH_TYPE_OMAP_PALMTT2 834
-+#define MACH_TYPE_XSCALE_PALMLD 835
-+#define MACH_TYPE_CC9C 836
-+#define MACH_TYPE_SBC1670 837
-+#define MACH_TYPE_IXDP28X5 838
-+#define MACH_TYPE_OMAP_PALMTT 839
-+#define MACH_TYPE_ML696K 840
-+#define MACH_TYPE_ARCOM_ZEUS 841
-+#define MACH_TYPE_OSIRIS 842
-+#define MACH_TYPE_MAESTRO 843
-+#define MACH_TYPE_TUNGE2 844
-+#define MACH_TYPE_IXBBM 845
-+#define MACH_TYPE_MX27 846
-+#define MACH_TYPE_AX8004 847
-+#define MACH_TYPE_AT91SAM9261EK 848
-+#define MACH_TYPE_LOFT 849
-+#define MACH_TYPE_MAGPIE 850
-+#define MACH_TYPE_MX21 851
-+#define MACH_TYPE_MB87M3400 852
-+#define MACH_TYPE_MGUARD_DELTA 853
-+#define MACH_TYPE_DAVINCI_DVDP 854
-+#define MACH_TYPE_HTCUNIVERSAL 855
-+#define MACH_TYPE_TPAD 856
-+#define MACH_TYPE_ROVERP3 857
-+#define MACH_TYPE_JORNADA928 858
-+#define MACH_TYPE_MV88FXX81 859
-+#define MACH_TYPE_STMP36XX 860
-+#define MACH_TYPE_SXNI79524 861
-+#define MACH_TYPE_AMS_DELTA 862
-+#define MACH_TYPE_URANIUM 863
-+#define MACH_TYPE_UCON 864
-+#define MACH_TYPE_NAS100D 865
-+#define MACH_TYPE_L083_1000 866
-+#define MACH_TYPE_EZX 867
-+#define MACH_TYPE_PNX5220 868
-+#define MACH_TYPE_BUTTE 869
-+#define MACH_TYPE_SRM2 870
-+#define MACH_TYPE_DSBR 871
-+#define MACH_TYPE_CRYSTALBALL 872
-+#define MACH_TYPE_TINYPXA27X 873
-+#define MACH_TYPE_HERBIE 874
-+#define MACH_TYPE_MAGICIAN 875
-+#define MACH_TYPE_CM4002 876
-+#define MACH_TYPE_B4 877
-+#define MACH_TYPE_MAUI 878
-+#define MACH_TYPE_CYBERTRACKER_G 879
-+#define MACH_TYPE_NXDKN 880
-+#define MACH_TYPE_MIO8390 881
-+#define MACH_TYPE_OMI_BOARD 882
-+#define MACH_TYPE_MX21CIV 883
-+#define MACH_TYPE_MAHI_CDAC 884
-+#define MACH_TYPE_XSCALE_PALMTX 885
-+#define MACH_TYPE_S3C2413 887
-+#define MACH_TYPE_SAMSYS_EP0 888
-+#define MACH_TYPE_WG302V1 889
-+#define MACH_TYPE_WG302V2 890
-+#define MACH_TYPE_EB42X 891
-+#define MACH_TYPE_IQ331ES 892
-+#define MACH_TYPE_COSYDSP 893
-+#define MACH_TYPE_UPLAT7D 894
-+#define MACH_TYPE_PTDAVINCI 895
-+#define MACH_TYPE_MBUS 896
-+#define MACH_TYPE_NADIA2VB 897
-+#define MACH_TYPE_R1000 898
-+#define MACH_TYPE_HW90250 899
-+#define MACH_TYPE_OMAP_2430SDP 900
-+#define MACH_TYPE_DAVINCI_EVM 901
-+#define MACH_TYPE_OMAP_TORNADO 902
-+#define MACH_TYPE_OLOCREEK 903
-+#define MACH_TYPE_PALMZ72 904
-+#define MACH_TYPE_NXDB500 905
-+#define MACH_TYPE_APF9328 906
-+#define MACH_TYPE_OMAP_WIPOQ 907
-+#define MACH_TYPE_OMAP_TWIP 908
-+#define MACH_TYPE_XSCALE_PALMTREO650 909
-+#define MACH_TYPE_ACUMEN 910
-+#define MACH_TYPE_XP100 911
-+#define MACH_TYPE_FS2410 912
-+#define MACH_TYPE_PXA270_CERF 913
-+#define MACH_TYPE_SQ2FTLPALM 914
-+#define MACH_TYPE_BSEMSERVER 915
-+#define MACH_TYPE_NETCLIENT 916
-+#define MACH_TYPE_XSCALE_PALMTT5 917
-+#define MACH_TYPE_OMAP_PALMTC 918
-+#define MACH_TYPE_OMAP_APOLLON 919
-+#define MACH_TYPE_ARGONLVEVB 920
-+#define MACH_TYPE_REA_2D 921
-+#define MACH_TYPE_TI3E524 922
-+#define MACH_TYPE_ATEB9200 923
-+#define MACH_TYPE_AUCKLAND 924
-+#define MACH_TYPE_AK3320M 925
-+#define MACH_TYPE_DURAMAX 926
-+#define MACH_TYPE_N35 927
-+#define MACH_TYPE_PRONGHORN 928
-+#define MACH_TYPE_FUNDY 929
-+#define MACH_TYPE_LOGICPD_PXA270 930
-+#define MACH_TYPE_CPU777 931
-+#define MACH_TYPE_SIMICON9201 932
-+#define MACH_TYPE_LEAP2_HPM 933
-+#define MACH_TYPE_CM922TXA10 934
-+#define MACH_TYPE_PXA 935
-+#define MACH_TYPE_SANDGATE2 936
-+#define MACH_TYPE_SANDGATE2G 937
-+#define MACH_TYPE_SANDGATE2P 938
-+#define MACH_TYPE_FRED_JACK 939
-+#define MACH_TYPE_TTG_COLOR1 940
-+#define MACH_TYPE_NXEB500HMI 941
-+#define MACH_TYPE_NETDCU8 942
-+#define MACH_TYPE_ML675050_CPU_BOA 943
-+#define MACH_TYPE_NG_FVX538 944
-+#define MACH_TYPE_NG_FVS338 945
-+#define MACH_TYPE_PNX4103 946
-+#define MACH_TYPE_HESDB 947
-+#define MACH_TYPE_XSILO 948
-+#define MACH_TYPE_ESPRESSO 949
-+#define MACH_TYPE_EMLC 950
-+#define MACH_TYPE_SISTERON 951
-+#define MACH_TYPE_RX1950 952
-+#define MACH_TYPE_TSC_VENUS 953
-+#define MACH_TYPE_DS101J 954
-+#define MACH_TYPE_MXC30030ADS 955
-+#define MACH_TYPE_FUJITSU_WIMAXSOC 956
-+#define MACH_TYPE_DUALPCMODEM 957
-+#define MACH_TYPE_GESBC9312 958
-+#define MACH_TYPE_HTCAPACHE 959
-+#define MACH_TYPE_IXDP435 960
-+#define MACH_TYPE_CATPROVT100 961
-+#define MACH_TYPE_PICOTUX1XX 962
-+#define MACH_TYPE_PICOTUX2XX 963
-+#define MACH_TYPE_DSMG600 964
-+#define MACH_TYPE_EMPC2 965
-+#define MACH_TYPE_VENTURA 966
-+#define MACH_TYPE_PHIDGET_SBC 967
-+#define MACH_TYPE_IJ3K 968
-+#define MACH_TYPE_PISGAH 969
-+#define MACH_TYPE_OMAP_FSAMPLE 970
-+#define MACH_TYPE_SG720 971
-+#define MACH_TYPE_REDFOX 972
-+#define MACH_TYPE_MYSH_EP9315_1 973
-+#define MACH_TYPE_TPF106 974
-+#define MACH_TYPE_AT91RM9200KG 975
-+#define MACH_TYPE_SLEDB 976
-+#define MACH_TYPE_ONTRACK 977
-+#define MACH_TYPE_PM1200 978
-+#define MACH_TYPE_ESS24XXX 979
-+#define MACH_TYPE_COREMP7 980
-+#define MACH_TYPE_NEXCODER_6446 981
-+#define MACH_TYPE_STVC8380 982
-+#define MACH_TYPE_TEKLYNX 983
-+#define MACH_TYPE_CARBONADO 984
-+#define MACH_TYPE_SYSMOS_MP730 985
-+#define MACH_TYPE_SNAPPER_CL15 986
-+#define MACH_TYPE_PGIGIM 987
-+#define MACH_TYPE_PTX9160P2 988
-+#define MACH_TYPE_DCORE1 989
-+#define MACH_TYPE_VICTORPXA 990
-+#define MACH_TYPE_MX2DTB 991
-+#define MACH_TYPE_PXA_IREX_ER0100 992
-+#define MACH_TYPE_OMAP_PALMZ71 993
-+#define MACH_TYPE_BARTEC_DEG 994
-+#define MACH_TYPE_HW50251 995
-+#define MACH_TYPE_IBOX 996
-+#define MACH_TYPE_ATLASLH7A404 997
-+#define MACH_TYPE_PT2026 998
-+#define MACH_TYPE_HTCALPINE 999
-+#define MACH_TYPE_BARTEC_VTU 1000
-+#define MACH_TYPE_VCOREII 1001
-+#define MACH_TYPE_PDNB3 1002
-+#define MACH_TYPE_HTCBEETLES 1003
-+#define MACH_TYPE_S3C6400 1004
-+#define MACH_TYPE_S3C2443 1005
-+#define MACH_TYPE_OMAP_LDK 1006
-+#define MACH_TYPE_SMDK2460 1007
-+#define MACH_TYPE_SMDK2440 1008
-+#define MACH_TYPE_SMDK2412 1009
-+#define MACH_TYPE_WEBBOX 1010
-+#define MACH_TYPE_CWWNDP 1011
-+#define MACH_TYPE_DRAGON 1012
-+#define MACH_TYPE_OPENDO_CPU_BOARD 1013
-+#define MACH_TYPE_CCM2200 1014
-+#define MACH_TYPE_ETWARM 1015
-+#define MACH_TYPE_M93030 1016
-+#define MACH_TYPE_CC7U 1017
-+#define MACH_TYPE_MTT_RANGER 1018
-+#define MACH_TYPE_NEXUS 1019
-+#define MACH_TYPE_DESMAN 1020
-+#define MACH_TYPE_BKDE303 1021
-+#define MACH_TYPE_SMDK2413 1022
-+#define MACH_TYPE_AML_M7200 1023
-+#define MACH_TYPE_AML_M5900 1024
-+#define MACH_TYPE_SG640 1025
-+#define MACH_TYPE_EDG79524 1026
-+#define MACH_TYPE_AI2410 1027
-+#define MACH_TYPE_IXP465 1028
-+#define MACH_TYPE_BALLOON3 1029
-+#define MACH_TYPE_QT2410 1108
-
- #ifdef CONFIG_ARCH_EBSA110
- # ifdef machine_arch_type
-@@ -3541,9 +3842,9 @@ # define machine_arch_type __machine_ar
- # else
- # define machine_arch_type MACH_TYPE_RAMSES
- # endif
--# define machine_is_ramses() (machine_arch_type == MACH_TYPE_RAMSES)
-+# define machine_is_mnci() (machine_arch_type == MACH_TYPE_RAMSES)
- #else
--# define machine_is_ramses() (0)
-+# define machine_is_mnci() (0)
- #endif
-
- #ifdef CONFIG_ARCH_S28X
-@@ -4501,9 +4802,9 @@ # define machine_arch_type __machine_ar
- # else
- # define machine_arch_type MACH_TYPE_M825XX
- # endif
--# define machine_is_m825xx() (machine_arch_type == MACH_TYPE_M825XX)
-+# define machine_is_comcerto() (machine_arch_type == MACH_TYPE_M825XX)
- #else
--# define machine_is_m825xx() (0)
-+# define machine_is_comcerto() (0)
- #endif
-
- #ifdef CONFIG_SA1100_M7100
-@@ -5658,16 +5959,16 @@ #else
- # define machine_is_xcep() (0)
- #endif
-
--#ifdef CONFIG_MACH_ARCOM_MERCURY
-+#ifdef CONFIG_MACH_ARCOM_VULCAN
- # ifdef machine_arch_type
- # undef machine_arch_type
- # define machine_arch_type __machine_arch_type
- # else
--# define machine_arch_type MACH_TYPE_ARCOM_MERCURY
-+# define machine_arch_type MACH_TYPE_ARCOM_VULCAN
- # endif
--# define machine_is_arcom_mercury() (machine_arch_type == MACH_TYPE_ARCOM_MERCURY)
-+# define machine_is_arcom_vulcan() (machine_arch_type == MACH_TYPE_ARCOM_VULCAN)
- #else
--# define machine_is_arcom_mercury() (0)
-+# define machine_is_arcom_vulcan() (0)
- #endif
-
- #ifdef CONFIG_MACH_STARGATE
-@@ -6054,16 +6355,16 @@ #else
- # define machine_is_ess710() (0)
- #endif
-
--#ifdef CONFIG_MACH_MX3ADS
-+#ifdef CONFIG_MACH_MX31ADS
- # ifdef machine_arch_type
- # undef machine_arch_type
- # define machine_arch_type __machine_arch_type
- # else
--# define machine_arch_type MACH_TYPE_MX3ADS
-+# define machine_arch_type MACH_TYPE_MX31ADS
- # endif
--# define machine_is_mx3ads() (machine_arch_type == MACH_TYPE_MX3ADS)
-+# define machine_is_mx31ads() (machine_arch_type == MACH_TYPE_MX31ADS)
- #else
--# define machine_is_mx3ads() (0)
-+# define machine_is_mx31ads() (0)
- #endif
-
- #ifdef CONFIG_MACH_HIMALAYA
-@@ -7333,9 +7634,9 @@ # define machine_arch_type __machine_ar
- # else
- # define machine_arch_type MACH_TYPE_ARGONPLUSEVB
- # endif
--# define machine_is_argonplusevb() (machine_arch_type == MACH_TYPE_ARGONPLUSEVB)
-+# define machine_is_i30030evb() (machine_arch_type == MACH_TYPE_ARGONPLUSEVB)
- #else
--# define machine_is_argonplusevb() (0)
-+# define machine_is_i30030evb() (0)
- #endif
-
- #ifdef CONFIG_MACH_SCMA11EVB
-@@ -7345,9 +7646,9 @@ # define machine_arch_type __machine_ar
- # else
- # define machine_arch_type MACH_TYPE_SCMA11EVB
- # endif
--# define machine_is_scma11evb() (machine_arch_type == MACH_TYPE_SCMA11EVB)
-+# define machine_is_mxc27530evb() (machine_arch_type == MACH_TYPE_SCMA11EVB)
- #else
--# define machine_is_scma11evb() (0)
-+# define machine_is_mxc27530evb() (0)
- #endif
-
- #ifdef CONFIG_MACH_SMDK2800
-@@ -8305,9 +8606,9 @@ # define machine_arch_type __machine_ar
- # else
- # define machine_arch_type MACH_TYPE_SCMA11BB
- # endif
--# define machine_is_scma11bb() (machine_arch_type == MACH_TYPE_SCMA11BB)
-+# define machine_is_mxc27530ads() (machine_arch_type == MACH_TYPE_SCMA11BB)
- #else
--# define machine_is_scma11bb() (0)
-+# define machine_is_mxc27530ads() (0)
- #endif
-
- #ifdef CONFIG_MACH_TRIZEPS3
-@@ -9193,9 +9494,9 @@ # define machine_arch_type __machine_ar
- # else
- # define machine_arch_type MACH_TYPE_ZEUSEVB
- # endif
--# define machine_is_zeusevb() (machine_arch_type == MACH_TYPE_ZEUSEVB)
-+# define machine_is_mxc91131evb() (machine_arch_type == MACH_TYPE_ZEUSEVB)
- #else
--# define machine_is_zeusevb() (0)
-+# define machine_is_mxc91131evb() (0)
- #endif
-
- #ifdef CONFIG_MACH_P700
-@@ -9402,6 +9703,3630 @@ #else
- # define machine_is_mp2usb() (0)
- #endif
-
-+#ifdef CONFIG_MACH_NTNP425C
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NTNP425C
-+# endif
-+# define machine_is_ntnp425c() (machine_arch_type == MACH_TYPE_NTNP425C)
-+#else
-+# define machine_is_ntnp425c() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_COLIBRI
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_COLIBRI
-+# endif
-+# define machine_is_colibri() (machine_arch_type == MACH_TYPE_COLIBRI)
-+#else
-+# define machine_is_colibri() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PCM7220
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PCM7220
-+# endif
-+# define machine_is_pcm7220() (machine_arch_type == MACH_TYPE_PCM7220)
-+#else
-+# define machine_is_pcm7220() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_GATEWAY7001
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_GATEWAY7001
-+# endif
-+# define machine_is_gateway7001() (machine_arch_type == MACH_TYPE_GATEWAY7001)
-+#else
-+# define machine_is_gateway7001() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PCM027
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PCM027
-+# endif
-+# define machine_is_pcm027() (machine_arch_type == MACH_TYPE_PCM027)
-+#else
-+# define machine_is_pcm027() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CMPXA
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CMPXA
-+# endif
-+# define machine_is_cmpxa() (machine_arch_type == MACH_TYPE_CMPXA)
-+#else
-+# define machine_is_cmpxa() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ANUBIS
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ANUBIS
-+# endif
-+# define machine_is_anubis() (machine_arch_type == MACH_TYPE_ANUBIS)
-+#else
-+# define machine_is_anubis() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ITE8152
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ITE8152
-+# endif
-+# define machine_is_ite8152() (machine_arch_type == MACH_TYPE_ITE8152)
-+#else
-+# define machine_is_ite8152() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_LPC3XXX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_LPC3XXX
-+# endif
-+# define machine_is_lpc3xxx() (machine_arch_type == MACH_TYPE_LPC3XXX)
-+#else
-+# define machine_is_lpc3xxx() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PUPPETEER
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PUPPETEER
-+# endif
-+# define machine_is_puppeteer() (machine_arch_type == MACH_TYPE_PUPPETEER)
-+#else
-+# define machine_is_puppeteer() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MACH_VADATECH
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MACH_VADATECH
-+# endif
-+# define machine_is_vt001() (machine_arch_type == MACH_TYPE_MACH_VADATECH)
-+#else
-+# define machine_is_vt001() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_E570
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_E570
-+# endif
-+# define machine_is_e570() (machine_arch_type == MACH_TYPE_E570)
-+#else
-+# define machine_is_e570() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_X50
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_X50
-+# endif
-+# define machine_is_x50() (machine_arch_type == MACH_TYPE_X50)
-+#else
-+# define machine_is_x50() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_RECON
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_RECON
-+# endif
-+# define machine_is_recon() (machine_arch_type == MACH_TYPE_RECON)
-+#else
-+# define machine_is_recon() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_XBOARDGP8
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_XBOARDGP8
-+# endif
-+# define machine_is_xboardgp8() (machine_arch_type == MACH_TYPE_XBOARDGP8)
-+#else
-+# define machine_is_xboardgp8() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_FPIC2
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_FPIC2
-+# endif
-+# define machine_is_fpic2() (machine_arch_type == MACH_TYPE_FPIC2)
-+#else
-+# define machine_is_fpic2() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AKITA
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_AKITA
-+# endif
-+# define machine_is_akita() (machine_arch_type == MACH_TYPE_AKITA)
-+#else
-+# define machine_is_akita() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_A81
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_A81
-+# endif
-+# define machine_is_a81() (machine_arch_type == MACH_TYPE_A81)
-+#else
-+# define machine_is_a81() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SVM_SC25X
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SVM_SC25X
-+# endif
-+# define machine_is_svm_sc25x() (machine_arch_type == MACH_TYPE_SVM_SC25X)
-+#else
-+# define machine_is_svm_sc25x() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_VADATECH020
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_VADATECH020
-+# endif
-+# define machine_is_vt020() (machine_arch_type == MACH_TYPE_VADATECH020)
-+#else
-+# define machine_is_vt020() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TLI
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_TLI
-+# endif
-+# define machine_is_tli() (machine_arch_type == MACH_TYPE_TLI)
-+#else
-+# define machine_is_tli() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EDB9315LC
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_EDB9315LC
-+# endif
-+# define machine_is_edb9315lc() (machine_arch_type == MACH_TYPE_EDB9315LC)
-+#else
-+# define machine_is_edb9315lc() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PASSEC
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PASSEC
-+# endif
-+# define machine_is_passec() (machine_arch_type == MACH_TYPE_PASSEC)
-+#else
-+# define machine_is_passec() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DS_TIGER
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DS_TIGER
-+# endif
-+# define machine_is_ds_tiger() (machine_arch_type == MACH_TYPE_DS_TIGER)
-+#else
-+# define machine_is_ds_tiger() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_E310
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_E310
-+# endif
-+# define machine_is_e310() (machine_arch_type == MACH_TYPE_E310)
-+#else
-+# define machine_is_e310() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_E330
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_E330
-+# endif
-+# define machine_is_e330() (machine_arch_type == MACH_TYPE_E330)
-+#else
-+# define machine_is_e330() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_RT3000
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_RT3000
-+# endif
-+# define machine_is_rt3000() (machine_arch_type == MACH_TYPE_RT3000)
-+#else
-+# define machine_is_rt3000() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NOKIA770
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NOKIA770
-+# endif
-+# define machine_is_nokia770() (machine_arch_type == MACH_TYPE_NOKIA770)
-+#else
-+# define machine_is_nokia770() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PNX0106
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PNX0106
-+# endif
-+# define machine_is_pnx0106() (machine_arch_type == MACH_TYPE_PNX0106)
-+#else
-+# define machine_is_pnx0106() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HX21XX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_HX21XX
-+# endif
-+# define machine_is_hx21xx() (machine_arch_type == MACH_TYPE_HX21XX)
-+#else
-+# define machine_is_hx21xx() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_FARADAY
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_FARADAY
-+# endif
-+# define machine_is_faraday() (machine_arch_type == MACH_TYPE_FARADAY)
-+#else
-+# define machine_is_faraday() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SBC9312
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SBC9312
-+# endif
-+# define machine_is_sbc9312() (machine_arch_type == MACH_TYPE_SBC9312)
-+#else
-+# define machine_is_sbc9312() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BATMAN
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_BATMAN
-+# endif
-+# define machine_is_batman() (machine_arch_type == MACH_TYPE_BATMAN)
-+#else
-+# define machine_is_batman() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_JPD201
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_JPD201
-+# endif
-+# define machine_is_jpd201() (machine_arch_type == MACH_TYPE_JPD201)
-+#else
-+# define machine_is_jpd201() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MIPSA
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MIPSA
-+# endif
-+# define machine_is_mipsa() (machine_arch_type == MACH_TYPE_MIPSA)
-+#else
-+# define machine_is_mipsa() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_KACOM
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_KACOM
-+# endif
-+# define machine_is_kacom() (machine_arch_type == MACH_TYPE_KACOM)
-+#else
-+# define machine_is_kacom() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SWARCOCPU
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SWARCOCPU
-+# endif
-+# define machine_is_swarcocpu() (machine_arch_type == MACH_TYPE_SWARCOCPU)
-+#else
-+# define machine_is_swarcocpu() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SWARCODSL
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SWARCODSL
-+# endif
-+# define machine_is_swarcodsl() (machine_arch_type == MACH_TYPE_SWARCODSL)
-+#else
-+# define machine_is_swarcodsl() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BLUEANGEL
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_BLUEANGEL
-+# endif
-+# define machine_is_blueangel() (machine_arch_type == MACH_TYPE_BLUEANGEL)
-+#else
-+# define machine_is_blueangel() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HAIRYGRAMA
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_HAIRYGRAMA
-+# endif
-+# define machine_is_hairygrama() (machine_arch_type == MACH_TYPE_HAIRYGRAMA)
-+#else
-+# define machine_is_hairygrama() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BANFF
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_BANFF
-+# endif
-+# define machine_is_banff() (machine_arch_type == MACH_TYPE_BANFF)
-+#else
-+# define machine_is_banff() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CARMEVA
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CARMEVA
-+# endif
-+# define machine_is_carmeva() (machine_arch_type == MACH_TYPE_CARMEVA)
-+#else
-+# define machine_is_carmeva() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SAM255
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SAM255
-+# endif
-+# define machine_is_sam255() (machine_arch_type == MACH_TYPE_SAM255)
-+#else
-+# define machine_is_sam255() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PPM10
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PPM10
-+# endif
-+# define machine_is_ppm10() (machine_arch_type == MACH_TYPE_PPM10)
-+#else
-+# define machine_is_ppm10() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EDB9315A
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_EDB9315A
-+# endif
-+# define machine_is_edb9315a() (machine_arch_type == MACH_TYPE_EDB9315A)
-+#else
-+# define machine_is_edb9315a() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SUNSET
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SUNSET
-+# endif
-+# define machine_is_sunset() (machine_arch_type == MACH_TYPE_SUNSET)
-+#else
-+# define machine_is_sunset() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_STARGATE2
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_STARGATE2
-+# endif
-+# define machine_is_stargate2() (machine_arch_type == MACH_TYPE_STARGATE2)
-+#else
-+# define machine_is_stargate2() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_INTELMOTE2
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_INTELMOTE2
-+# endif
-+# define machine_is_intelmote2() (machine_arch_type == MACH_TYPE_INTELMOTE2)
-+#else
-+# define machine_is_intelmote2() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TRIZEPS4
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_TRIZEPS4
-+# endif
-+# define machine_is_trizeps4() (machine_arch_type == MACH_TYPE_TRIZEPS4)
-+#else
-+# define machine_is_trizeps4() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MAINSTONE2
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MAINSTONE2
-+# endif
-+# define machine_is_mainstone2() (machine_arch_type == MACH_TYPE_MAINSTONE2)
-+#else
-+# define machine_is_mainstone2() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EZ_IXP42X
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_EZ_IXP42X
-+# endif
-+# define machine_is_ez_ixp42x() (machine_arch_type == MACH_TYPE_EZ_IXP42X)
-+#else
-+# define machine_is_ez_ixp42x() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TAPWAVE_ZODIAC
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_TAPWAVE_ZODIAC
-+# endif
-+# define machine_is_tapwave_zodiac() (machine_arch_type == MACH_TYPE_TAPWAVE_ZODIAC)
-+#else
-+# define machine_is_tapwave_zodiac() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_UNIVERSALMETER
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_UNIVERSALMETER
-+# endif
-+# define machine_is_universalmeter() (machine_arch_type == MACH_TYPE_UNIVERSALMETER)
-+#else
-+# define machine_is_universalmeter() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HICOARM9
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_HICOARM9
-+# endif
-+# define machine_is_hicoarm9() (machine_arch_type == MACH_TYPE_HICOARM9)
-+#else
-+# define machine_is_hicoarm9() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PNX4008
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PNX4008
-+# endif
-+# define machine_is_pnx4008() (machine_arch_type == MACH_TYPE_PNX4008)
-+#else
-+# define machine_is_pnx4008() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_KWS6000
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_KWS6000
-+# endif
-+# define machine_is_kws6000() (machine_arch_type == MACH_TYPE_KWS6000)
-+#else
-+# define machine_is_kws6000() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PORTUX920T
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PORTUX920T
-+# endif
-+# define machine_is_portux920t() (machine_arch_type == MACH_TYPE_PORTUX920T)
-+#else
-+# define machine_is_portux920t() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EZ_X5
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_EZ_X5
-+# endif
-+# define machine_is_ez_x5() (machine_arch_type == MACH_TYPE_EZ_X5)
-+#else
-+# define machine_is_ez_x5() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_RUDOLPH
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_RUDOLPH
-+# endif
-+# define machine_is_omap_rudolph() (machine_arch_type == MACH_TYPE_OMAP_RUDOLPH)
-+#else
-+# define machine_is_omap_rudolph() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CPUAT91
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CPUAT91
-+# endif
-+# define machine_is_cpuat91() (machine_arch_type == MACH_TYPE_CPUAT91)
-+#else
-+# define machine_is_cpuat91() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_REA9200
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_REA9200
-+# endif
-+# define machine_is_rea9200() (machine_arch_type == MACH_TYPE_REA9200)
-+#else
-+# define machine_is_rea9200() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ACTS_PUNE_SA1110
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ACTS_PUNE_SA1110
-+# endif
-+# define machine_is_acts_pune_sa1110() (machine_arch_type == MACH_TYPE_ACTS_PUNE_SA1110)
-+#else
-+# define machine_is_acts_pune_sa1110() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IXP425
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IXP425
-+# endif
-+# define machine_is_ixp425() (machine_arch_type == MACH_TYPE_IXP425)
-+#else
-+# define machine_is_ixp425() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ARGONPLUSODYSSEY
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ARGONPLUSODYSSEY
-+# endif
-+# define machine_is_i30030ads() (machine_arch_type == MACH_TYPE_ARGONPLUSODYSSEY)
-+#else
-+# define machine_is_i30030ads() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PERCH
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PERCH
-+# endif
-+# define machine_is_perch() (machine_arch_type == MACH_TYPE_PERCH)
-+#else
-+# define machine_is_perch() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EIS05R1
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_EIS05R1
-+# endif
-+# define machine_is_eis05r1() (machine_arch_type == MACH_TYPE_EIS05R1)
-+#else
-+# define machine_is_eis05r1() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PEPPERPAD
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PEPPERPAD
-+# endif
-+# define machine_is_pepperpad() (machine_arch_type == MACH_TYPE_PEPPERPAD)
-+#else
-+# define machine_is_pepperpad() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SB3010
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SB3010
-+# endif
-+# define machine_is_sb3010() (machine_arch_type == MACH_TYPE_SB3010)
-+#else
-+# define machine_is_sb3010() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_RM9200
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_RM9200
-+# endif
-+# define machine_is_rm9200() (machine_arch_type == MACH_TYPE_RM9200)
-+#else
-+# define machine_is_rm9200() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DMA03
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DMA03
-+# endif
-+# define machine_is_dma03() (machine_arch_type == MACH_TYPE_DMA03)
-+#else
-+# define machine_is_dma03() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ROAD_S101
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ROAD_S101
-+# endif
-+# define machine_is_road_s101() (machine_arch_type == MACH_TYPE_ROAD_S101)
-+#else
-+# define machine_is_road_s101() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IQ_NEXTGEN_A
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_A
-+# endif
-+# define machine_is_iq_nextgen_a() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_A)
-+#else
-+# define machine_is_iq_nextgen_a() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IQ_NEXTGEN_B
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_B
-+# endif
-+# define machine_is_iq_nextgen_b() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_B)
-+#else
-+# define machine_is_iq_nextgen_b() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IQ_NEXTGEN_C
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_C
-+# endif
-+# define machine_is_iq_nextgen_c() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_C)
-+#else
-+# define machine_is_iq_nextgen_c() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IQ_NEXTGEN_D
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_D
-+# endif
-+# define machine_is_iq_nextgen_d() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_D)
-+#else
-+# define machine_is_iq_nextgen_d() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IQ_NEXTGEN_E
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_E
-+# endif
-+# define machine_is_iq_nextgen_e() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_E)
-+#else
-+# define machine_is_iq_nextgen_e() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MALLOW_AT91
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MALLOW_AT91
-+# endif
-+# define machine_is_mallow_at91() (machine_arch_type == MACH_TYPE_MALLOW_AT91)
-+#else
-+# define machine_is_mallow_at91() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CYBERTRACKER_I
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CYBERTRACKER_I
-+# endif
-+# define machine_is_cybertracker_i() (machine_arch_type == MACH_TYPE_CYBERTRACKER_I)
-+#else
-+# define machine_is_cybertracker_i() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_GESBC931X
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_GESBC931X
-+# endif
-+# define machine_is_gesbc931x() (machine_arch_type == MACH_TYPE_GESBC931X)
-+#else
-+# define machine_is_gesbc931x() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CENTIPAD
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CENTIPAD
-+# endif
-+# define machine_is_centipad() (machine_arch_type == MACH_TYPE_CENTIPAD)
-+#else
-+# define machine_is_centipad() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ARMSOC
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ARMSOC
-+# endif
-+# define machine_is_armsoc() (machine_arch_type == MACH_TYPE_ARMSOC)
-+#else
-+# define machine_is_armsoc() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SE4200
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SE4200
-+# endif
-+# define machine_is_se4200() (machine_arch_type == MACH_TYPE_SE4200)
-+#else
-+# define machine_is_se4200() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EMS197A
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_EMS197A
-+# endif
-+# define machine_is_ems197a() (machine_arch_type == MACH_TYPE_EMS197A)
-+#else
-+# define machine_is_ems197a() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MICRO9
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MICRO9
-+# endif
-+# define machine_is_micro9() (machine_arch_type == MACH_TYPE_MICRO9)
-+#else
-+# define machine_is_micro9() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MICRO9L
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MICRO9L
-+# endif
-+# define machine_is_micro9l() (machine_arch_type == MACH_TYPE_MICRO9L)
-+#else
-+# define machine_is_micro9l() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_UC5471DSP
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_UC5471DSP
-+# endif
-+# define machine_is_uc5471dsp() (machine_arch_type == MACH_TYPE_UC5471DSP)
-+#else
-+# define machine_is_uc5471dsp() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SJ5471ENG
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SJ5471ENG
-+# endif
-+# define machine_is_sj5471eng() (machine_arch_type == MACH_TYPE_SJ5471ENG)
-+#else
-+# define machine_is_sj5471eng() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CMPXA26X
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CMPXA26X
-+# endif
-+# define machine_is_none() (machine_arch_type == MACH_TYPE_CMPXA26X)
-+#else
-+# define machine_is_none() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NC
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NC
-+# endif
-+# define machine_is_nc1() (machine_arch_type == MACH_TYPE_NC)
-+#else
-+# define machine_is_nc1() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_PALMTE
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_PALMTE
-+# endif
-+# define machine_is_omap_palmte() (machine_arch_type == MACH_TYPE_OMAP_PALMTE)
-+#else
-+# define machine_is_omap_palmte() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AJAX52X
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_AJAX52X
-+# endif
-+# define machine_is_ajax52x() (machine_arch_type == MACH_TYPE_AJAX52X)
-+#else
-+# define machine_is_ajax52x() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SIRIUSTAR
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SIRIUSTAR
-+# endif
-+# define machine_is_siriustar() (machine_arch_type == MACH_TYPE_SIRIUSTAR)
-+#else
-+# define machine_is_siriustar() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IODATA_HDLG
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IODATA_HDLG
-+# endif
-+# define machine_is_iodata_hdlg() (machine_arch_type == MACH_TYPE_IODATA_HDLG)
-+#else
-+# define machine_is_iodata_hdlg() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AT91RM9200UTL
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_AT91RM9200UTL
-+# endif
-+# define machine_is_at91rm9200utl() (machine_arch_type == MACH_TYPE_AT91RM9200UTL)
-+#else
-+# define machine_is_at91rm9200utl() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BIOSAFE
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_BIOSAFE
-+# endif
-+# define machine_is_biosafe() (machine_arch_type == MACH_TYPE_BIOSAFE)
-+#else
-+# define machine_is_biosafe() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MP1000
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MP1000
-+# endif
-+# define machine_is_mp1000() (machine_arch_type == MACH_TYPE_MP1000)
-+#else
-+# define machine_is_mp1000() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PARSY
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PARSY
-+# endif
-+# define machine_is_parsy() (machine_arch_type == MACH_TYPE_PARSY)
-+#else
-+# define machine_is_parsy() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CCXP
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CCXP
-+# endif
-+# define machine_is_ccxp270() (machine_arch_type == MACH_TYPE_CCXP)
-+#else
-+# define machine_is_ccxp270() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_GSAMPLE
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_GSAMPLE
-+# endif
-+# define machine_is_omap_gsample() (machine_arch_type == MACH_TYPE_OMAP_GSAMPLE)
-+#else
-+# define machine_is_omap_gsample() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_REALVIEW_EB
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_REALVIEW_EB
-+# endif
-+# define machine_is_realview_eb() (machine_arch_type == MACH_TYPE_REALVIEW_EB)
-+#else
-+# define machine_is_realview_eb() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SAMOA
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SAMOA
-+# endif
-+# define machine_is_samoa() (machine_arch_type == MACH_TYPE_SAMOA)
-+#else
-+# define machine_is_samoa() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_T3XSCALE
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_T3XSCALE
-+# endif
-+# define machine_is_t3xscale() (machine_arch_type == MACH_TYPE_T3XSCALE)
-+#else
-+# define machine_is_t3xscale() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_I878
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_I878
-+# endif
-+# define machine_is_i878() (machine_arch_type == MACH_TYPE_I878)
-+#else
-+# define machine_is_i878() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BORZOI
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_BORZOI
-+# endif
-+# define machine_is_borzoi() (machine_arch_type == MACH_TYPE_BORZOI)
-+#else
-+# define machine_is_borzoi() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_GECKO
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_GECKO
-+# endif
-+# define machine_is_gecko() (machine_arch_type == MACH_TYPE_GECKO)
-+#else
-+# define machine_is_gecko() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DS101
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DS101
-+# endif
-+# define machine_is_ds101() (machine_arch_type == MACH_TYPE_DS101)
-+#else
-+# define machine_is_ds101() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_PALMTT2
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_PALMTT2
-+# endif
-+# define machine_is_omap_palmtt2() (machine_arch_type == MACH_TYPE_OMAP_PALMTT2)
-+#else
-+# define machine_is_omap_palmtt2() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_XSCALE_PALMLD
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_XSCALE_PALMLD
-+# endif
-+# define machine_is_xscale_palmld() (machine_arch_type == MACH_TYPE_XSCALE_PALMLD)
-+#else
-+# define machine_is_xscale_palmld() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CC9C
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CC9C
-+# endif
-+# define machine_is_cc9c() (machine_arch_type == MACH_TYPE_CC9C)
-+#else
-+# define machine_is_cc9c() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SBC1670
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SBC1670
-+# endif
-+# define machine_is_sbc1670() (machine_arch_type == MACH_TYPE_SBC1670)
-+#else
-+# define machine_is_sbc1670() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IXDP28X5
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IXDP28X5
-+# endif
-+# define machine_is_ixdp28x5() (machine_arch_type == MACH_TYPE_IXDP28X5)
-+#else
-+# define machine_is_ixdp28x5() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_PALMTT
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_PALMTT
-+# endif
-+# define machine_is_omap_palmtt() (machine_arch_type == MACH_TYPE_OMAP_PALMTT)
-+#else
-+# define machine_is_omap_palmtt() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ML696K
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ML696K
-+# endif
-+# define machine_is_ml696k() (machine_arch_type == MACH_TYPE_ML696K)
-+#else
-+# define machine_is_ml696k() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ARCOM_ZEUS
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ARCOM_ZEUS
-+# endif
-+# define machine_is_arcom_zeus() (machine_arch_type == MACH_TYPE_ARCOM_ZEUS)
-+#else
-+# define machine_is_arcom_zeus() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OSIRIS
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OSIRIS
-+# endif
-+# define machine_is_osiris() (machine_arch_type == MACH_TYPE_OSIRIS)
-+#else
-+# define machine_is_osiris() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MAESTRO
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MAESTRO
-+# endif
-+# define machine_is_maestro() (machine_arch_type == MACH_TYPE_MAESTRO)
-+#else
-+# define machine_is_maestro() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TUNGE2
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_TUNGE2
-+# endif
-+# define machine_is_tunge2() (machine_arch_type == MACH_TYPE_TUNGE2)
-+#else
-+# define machine_is_tunge2() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IXBBM
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IXBBM
-+# endif
-+# define machine_is_ixbbm() (machine_arch_type == MACH_TYPE_IXBBM)
-+#else
-+# define machine_is_ixbbm() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MX27
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MX27
-+# endif
-+# define machine_is_mx27ads() (machine_arch_type == MACH_TYPE_MX27)
-+#else
-+# define machine_is_mx27ads() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AX8004
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_AX8004
-+# endif
-+# define machine_is_ax8004() (machine_arch_type == MACH_TYPE_AX8004)
-+#else
-+# define machine_is_ax8004() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AT91SAM9261EK
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_AT91SAM9261EK
-+# endif
-+# define machine_is_at91sam9261ek() (machine_arch_type == MACH_TYPE_AT91SAM9261EK)
-+#else
-+# define machine_is_at91sam9261ek() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_LOFT
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_LOFT
-+# endif
-+# define machine_is_loft() (machine_arch_type == MACH_TYPE_LOFT)
-+#else
-+# define machine_is_loft() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MAGPIE
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MAGPIE
-+# endif
-+# define machine_is_magpie() (machine_arch_type == MACH_TYPE_MAGPIE)
-+#else
-+# define machine_is_magpie() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MX21
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MX21
-+# endif
-+# define machine_is_mx21ads() (machine_arch_type == MACH_TYPE_MX21)
-+#else
-+# define machine_is_mx21ads() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MB87M3400
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MB87M3400
-+# endif
-+# define machine_is_mb87m3400() (machine_arch_type == MACH_TYPE_MB87M3400)
-+#else
-+# define machine_is_mb87m3400() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MGUARD_DELTA
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MGUARD_DELTA
-+# endif
-+# define machine_is_mguard_delta() (machine_arch_type == MACH_TYPE_MGUARD_DELTA)
-+#else
-+# define machine_is_mguard_delta() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DAVINCI_DVDP
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DAVINCI_DVDP
-+# endif
-+# define machine_is_davinci_dvdp() (machine_arch_type == MACH_TYPE_DAVINCI_DVDP)
-+#else
-+# define machine_is_davinci_dvdp() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HTCUNIVERSAL
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_HTCUNIVERSAL
-+# endif
-+# define machine_is_htcuniversal() (machine_arch_type == MACH_TYPE_HTCUNIVERSAL)
-+#else
-+# define machine_is_htcuniversal() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TPAD
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_TPAD
-+# endif
-+# define machine_is_tpad() (machine_arch_type == MACH_TYPE_TPAD)
-+#else
-+# define machine_is_tpad() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ROVERP3
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ROVERP3
-+# endif
-+# define machine_is_roverp3() (machine_arch_type == MACH_TYPE_ROVERP3)
-+#else
-+# define machine_is_roverp3() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_JORNADA928
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_JORNADA928
-+# endif
-+# define machine_is_jornada928() (machine_arch_type == MACH_TYPE_JORNADA928)
-+#else
-+# define machine_is_jornada928() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MV88FXX81
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MV88FXX81
-+# endif
-+# define machine_is_mv88fxx81() (machine_arch_type == MACH_TYPE_MV88FXX81)
-+#else
-+# define machine_is_mv88fxx81() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_STMP36XX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_STMP36XX
-+# endif
-+# define machine_is_stmp36xx() (machine_arch_type == MACH_TYPE_STMP36XX)
-+#else
-+# define machine_is_stmp36xx() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SXNI79524
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SXNI79524
-+# endif
-+# define machine_is_sxni79524() (machine_arch_type == MACH_TYPE_SXNI79524)
-+#else
-+# define machine_is_sxni79524() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AMS_DELTA
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_AMS_DELTA
-+# endif
-+# define machine_is_ams_delta() (machine_arch_type == MACH_TYPE_AMS_DELTA)
-+#else
-+# define machine_is_ams_delta() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_URANIUM
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_URANIUM
-+# endif
-+# define machine_is_uranium() (machine_arch_type == MACH_TYPE_URANIUM)
-+#else
-+# define machine_is_uranium() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_UCON
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_UCON
-+# endif
-+# define machine_is_ucon() (machine_arch_type == MACH_TYPE_UCON)
-+#else
-+# define machine_is_ucon() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NAS100D
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NAS100D
-+# endif
-+# define machine_is_nas100d() (machine_arch_type == MACH_TYPE_NAS100D)
-+#else
-+# define machine_is_nas100d() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_L083_1000
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_L083_1000
-+# endif
-+# define machine_is_l083() (machine_arch_type == MACH_TYPE_L083_1000)
-+#else
-+# define machine_is_l083() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EZX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_EZX
-+# endif
-+# define machine_is_ezx() (machine_arch_type == MACH_TYPE_EZX)
-+#else
-+# define machine_is_ezx() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PNX5220
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PNX5220
-+# endif
-+# define machine_is_pnx5220() (machine_arch_type == MACH_TYPE_PNX5220)
-+#else
-+# define machine_is_pnx5220() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BUTTE
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_BUTTE
-+# endif
-+# define machine_is_butte() (machine_arch_type == MACH_TYPE_BUTTE)
-+#else
-+# define machine_is_butte() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SRM2
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SRM2
-+# endif
-+# define machine_is_srm2() (machine_arch_type == MACH_TYPE_SRM2)
-+#else
-+# define machine_is_srm2() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DSBR
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DSBR
-+# endif
-+# define machine_is_dsbr() (machine_arch_type == MACH_TYPE_DSBR)
-+#else
-+# define machine_is_dsbr() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CRYSTALBALL
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CRYSTALBALL
-+# endif
-+# define machine_is_crystalball() (machine_arch_type == MACH_TYPE_CRYSTALBALL)
-+#else
-+# define machine_is_crystalball() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TINYPXA27X
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_TINYPXA27X
-+# endif
-+# define machine_is_tinypxa27x() (machine_arch_type == MACH_TYPE_TINYPXA27X)
-+#else
-+# define machine_is_tinypxa27x() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HERBIE
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_HERBIE
-+# endif
-+# define machine_is_herbie() (machine_arch_type == MACH_TYPE_HERBIE)
-+#else
-+# define machine_is_herbie() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MAGICIAN
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MAGICIAN
-+# endif
-+# define machine_is_magician() (machine_arch_type == MACH_TYPE_MAGICIAN)
-+#else
-+# define machine_is_magician() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CM4002
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CM4002
-+# endif
-+# define machine_is_cm4002() (machine_arch_type == MACH_TYPE_CM4002)
-+#else
-+# define machine_is_cm4002() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_B4
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_B4
-+# endif
-+# define machine_is_b4() (machine_arch_type == MACH_TYPE_B4)
-+#else
-+# define machine_is_b4() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MAUI
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MAUI
-+# endif
-+# define machine_is_maui() (machine_arch_type == MACH_TYPE_MAUI)
-+#else
-+# define machine_is_maui() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CYBERTRACKER_G
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CYBERTRACKER_G
-+# endif
-+# define machine_is_cybertracker_g() (machine_arch_type == MACH_TYPE_CYBERTRACKER_G)
-+#else
-+# define machine_is_cybertracker_g() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NXDKN
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NXDKN
-+# endif
-+# define machine_is_nxdkn() (machine_arch_type == MACH_TYPE_NXDKN)
-+#else
-+# define machine_is_nxdkn() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MIO8390
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MIO8390
-+# endif
-+# define machine_is_mio8390() (machine_arch_type == MACH_TYPE_MIO8390)
-+#else
-+# define machine_is_mio8390() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMI_BOARD
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMI_BOARD
-+# endif
-+# define machine_is_omi_board() (machine_arch_type == MACH_TYPE_OMI_BOARD)
-+#else
-+# define machine_is_omi_board() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MX21CIV
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MX21CIV
-+# endif
-+# define machine_is_mx21civ() (machine_arch_type == MACH_TYPE_MX21CIV)
-+#else
-+# define machine_is_mx21civ() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MAHI_CDAC
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MAHI_CDAC
-+# endif
-+# define machine_is_mahi_cdac() (machine_arch_type == MACH_TYPE_MAHI_CDAC)
-+#else
-+# define machine_is_mahi_cdac() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_XSCALE_PALMTX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_XSCALE_PALMTX
-+# endif
-+# define machine_is_xscale_palmtx() (machine_arch_type == MACH_TYPE_XSCALE_PALMTX)
-+#else
-+# define machine_is_xscale_palmtx() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_S3C2413
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_S3C2413
-+# endif
-+# define machine_is_s3c2413() (machine_arch_type == MACH_TYPE_S3C2413)
-+#else
-+# define machine_is_s3c2413() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SAMSYS_EP0
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SAMSYS_EP0
-+# endif
-+# define machine_is_samsys_ep0() (machine_arch_type == MACH_TYPE_SAMSYS_EP0)
-+#else
-+# define machine_is_samsys_ep0() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_WG302V1
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_WG302V1
-+# endif
-+# define machine_is_wg302v1() (machine_arch_type == MACH_TYPE_WG302V1)
-+#else
-+# define machine_is_wg302v1() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_WG302V2
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_WG302V2
-+# endif
-+# define machine_is_wg302v2() (machine_arch_type == MACH_TYPE_WG302V2)
-+#else
-+# define machine_is_wg302v2() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EB42X
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_EB42X
-+# endif
-+# define machine_is_eb42x() (machine_arch_type == MACH_TYPE_EB42X)
-+#else
-+# define machine_is_eb42x() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IQ331ES
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IQ331ES
-+# endif
-+# define machine_is_iq331es() (machine_arch_type == MACH_TYPE_IQ331ES)
-+#else
-+# define machine_is_iq331es() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_COSYDSP
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_COSYDSP
-+# endif
-+# define machine_is_cosydsp() (machine_arch_type == MACH_TYPE_COSYDSP)
-+#else
-+# define machine_is_cosydsp() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_UPLAT7D
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_UPLAT7D
-+# endif
-+# define machine_is_uplat7d_proto() (machine_arch_type == MACH_TYPE_UPLAT7D)
-+#else
-+# define machine_is_uplat7d_proto() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PTDAVINCI
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PTDAVINCI
-+# endif
-+# define machine_is_ptdavinci() (machine_arch_type == MACH_TYPE_PTDAVINCI)
-+#else
-+# define machine_is_ptdavinci() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MBUS
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MBUS
-+# endif
-+# define machine_is_mbus() (machine_arch_type == MACH_TYPE_MBUS)
-+#else
-+# define machine_is_mbus() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NADIA2VB
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NADIA2VB
-+# endif
-+# define machine_is_nadia2vb() (machine_arch_type == MACH_TYPE_NADIA2VB)
-+#else
-+# define machine_is_nadia2vb() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_R1000
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_R1000
-+# endif
-+# define machine_is_r1000() (machine_arch_type == MACH_TYPE_R1000)
-+#else
-+# define machine_is_r1000() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HW90250
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_HW90250
-+# endif
-+# define machine_is_hw90250() (machine_arch_type == MACH_TYPE_HW90250)
-+#else
-+# define machine_is_hw90250() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_2430SDP
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_2430SDP
-+# endif
-+# define machine_is_omap_2430sdp() (machine_arch_type == MACH_TYPE_OMAP_2430SDP)
-+#else
-+# define machine_is_omap_2430sdp() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DAVINCI_EVM
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DAVINCI_EVM
-+# endif
-+# define machine_is_davinci_evm() (machine_arch_type == MACH_TYPE_DAVINCI_EVM)
-+#else
-+# define machine_is_davinci_evm() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_TORNADO
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_TORNADO
-+# endif
-+# define machine_is_omap_tornado() (machine_arch_type == MACH_TYPE_OMAP_TORNADO)
-+#else
-+# define machine_is_omap_tornado() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OLOCREEK
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OLOCREEK
-+# endif
-+# define machine_is_olocreek() (machine_arch_type == MACH_TYPE_OLOCREEK)
-+#else
-+# define machine_is_olocreek() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PALMZ72
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PALMZ72
-+# endif
-+# define machine_is_palmz72() (machine_arch_type == MACH_TYPE_PALMZ72)
-+#else
-+# define machine_is_palmz72() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NXDB500
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NXDB500
-+# endif
-+# define machine_is_nxdb500() (machine_arch_type == MACH_TYPE_NXDB500)
-+#else
-+# define machine_is_nxdb500() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_APF9328
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_APF9328
-+# endif
-+# define machine_is_apf9328() (machine_arch_type == MACH_TYPE_APF9328)
-+#else
-+# define machine_is_apf9328() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_WIPOQ
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_WIPOQ
-+# endif
-+# define machine_is_omap_wipoq() (machine_arch_type == MACH_TYPE_OMAP_WIPOQ)
-+#else
-+# define machine_is_omap_wipoq() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_TWIP
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_TWIP
-+# endif
-+# define machine_is_omap_twip() (machine_arch_type == MACH_TYPE_OMAP_TWIP)
-+#else
-+# define machine_is_omap_twip() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_XSCALE_PALMTREO650
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_XSCALE_PALMTREO650
-+# endif
-+# define machine_is_xscale_treo650() (machine_arch_type == MACH_TYPE_XSCALE_PALMTREO650)
-+#else
-+# define machine_is_xscale_treo650() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ACUMEN
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ACUMEN
-+# endif
-+# define machine_is_acumen() (machine_arch_type == MACH_TYPE_ACUMEN)
-+#else
-+# define machine_is_acumen() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_XP100
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_XP100
-+# endif
-+# define machine_is_xp100() (machine_arch_type == MACH_TYPE_XP100)
-+#else
-+# define machine_is_xp100() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_FS2410
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_FS2410
-+# endif
-+# define machine_is_fs2410() (machine_arch_type == MACH_TYPE_FS2410)
-+#else
-+# define machine_is_fs2410() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PXA270_CERF
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PXA270_CERF
-+# endif
-+# define machine_is_pxa270_cerf() (machine_arch_type == MACH_TYPE_PXA270_CERF)
-+#else
-+# define machine_is_pxa270_cerf() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SQ2FTLPALM
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SQ2FTLPALM
-+# endif
-+# define machine_is_sq2ftlpalm() (machine_arch_type == MACH_TYPE_SQ2FTLPALM)
-+#else
-+# define machine_is_sq2ftlpalm() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BSEMSERVER
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_BSEMSERVER
-+# endif
-+# define machine_is_bsemserver() (machine_arch_type == MACH_TYPE_BSEMSERVER)
-+#else
-+# define machine_is_bsemserver() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NETCLIENT
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NETCLIENT
-+# endif
-+# define machine_is_netclient() (machine_arch_type == MACH_TYPE_NETCLIENT)
-+#else
-+# define machine_is_netclient() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_XSCALE_PALMTT5
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_XSCALE_PALMTT5
-+# endif
-+# define machine_is_xscale_palmtt5() (machine_arch_type == MACH_TYPE_XSCALE_PALMTT5)
-+#else
-+# define machine_is_xscale_palmtt5() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_PALMTC
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_PALMTC
-+# endif
-+# define machine_is_xscale_palmtc() (machine_arch_type == MACH_TYPE_OMAP_PALMTC)
-+#else
-+# define machine_is_xscale_palmtc() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_APOLLON
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_APOLLON
-+# endif
-+# define machine_is_omap_apollon() (machine_arch_type == MACH_TYPE_OMAP_APOLLON)
-+#else
-+# define machine_is_omap_apollon() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ARGONLVEVB
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ARGONLVEVB
-+# endif
-+# define machine_is_mxc30030evb() (machine_arch_type == MACH_TYPE_ARGONLVEVB)
-+#else
-+# define machine_is_mxc30030evb() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_REA_2D
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_REA_2D
-+# endif
-+# define machine_is_rea_2d() (machine_arch_type == MACH_TYPE_REA_2D)
-+#else
-+# define machine_is_rea_2d() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TI3E524
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_TI3E524
-+# endif
-+# define machine_is_eti3e524() (machine_arch_type == MACH_TYPE_TI3E524)
-+#else
-+# define machine_is_eti3e524() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ATEB9200
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ATEB9200
-+# endif
-+# define machine_is_ateb9200() (machine_arch_type == MACH_TYPE_ATEB9200)
-+#else
-+# define machine_is_ateb9200() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AUCKLAND
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_AUCKLAND
-+# endif
-+# define machine_is_auckland() (machine_arch_type == MACH_TYPE_AUCKLAND)
-+#else
-+# define machine_is_auckland() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AK3320M
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_AK3320M
-+# endif
-+# define machine_is_ak3220m() (machine_arch_type == MACH_TYPE_AK3320M)
-+#else
-+# define machine_is_ak3220m() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DURAMAX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DURAMAX
-+# endif
-+# define machine_is_duramax() (machine_arch_type == MACH_TYPE_DURAMAX)
-+#else
-+# define machine_is_duramax() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_N35
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_N35
-+# endif
-+# define machine_is_n35() (machine_arch_type == MACH_TYPE_N35)
-+#else
-+# define machine_is_n35() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PRONGHORN
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PRONGHORN
-+# endif
-+# define machine_is_pronghorn() (machine_arch_type == MACH_TYPE_PRONGHORN)
-+#else
-+# define machine_is_pronghorn() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_FUNDY
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_FUNDY
-+# endif
-+# define machine_is_fundy() (machine_arch_type == MACH_TYPE_FUNDY)
-+#else
-+# define machine_is_fundy() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_LOGICPD_PXA270
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_LOGICPD_PXA270
-+# endif
-+# define machine_is_logicpd_pxa270() (machine_arch_type == MACH_TYPE_LOGICPD_PXA270)
-+#else
-+# define machine_is_logicpd_pxa270() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CPU777
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CPU777
-+# endif
-+# define machine_is_cpu777() (machine_arch_type == MACH_TYPE_CPU777)
-+#else
-+# define machine_is_cpu777() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SIMICON9201
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SIMICON9201
-+# endif
-+# define machine_is_simicon9201() (machine_arch_type == MACH_TYPE_SIMICON9201)
-+#else
-+# define machine_is_simicon9201() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_LEAP2_HPM
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_LEAP2_HPM
-+# endif
-+# define machine_is_leap2_hpm() (machine_arch_type == MACH_TYPE_LEAP2_HPM)
-+#else
-+# define machine_is_leap2_hpm() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CM922TXA10
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CM922TXA10
-+# endif
-+# define machine_is_cm922txa10() (machine_arch_type == MACH_TYPE_CM922TXA10)
-+#else
-+# define machine_is_cm922txa10() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PXA
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PXA
-+# endif
-+# define machine_is_sandgate() (machine_arch_type == MACH_TYPE_PXA)
-+#else
-+# define machine_is_sandgate() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SANDGATE2
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SANDGATE2
-+# endif
-+# define machine_is_sandgate2() (machine_arch_type == MACH_TYPE_SANDGATE2)
-+#else
-+# define machine_is_sandgate2() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SANDGATE2G
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SANDGATE2G
-+# endif
-+# define machine_is_sandgate2g() (machine_arch_type == MACH_TYPE_SANDGATE2G)
-+#else
-+# define machine_is_sandgate2g() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SANDGATE2P
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SANDGATE2P
-+# endif
-+# define machine_is_sandgate2p() (machine_arch_type == MACH_TYPE_SANDGATE2P)
-+#else
-+# define machine_is_sandgate2p() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_FRED_JACK
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_FRED_JACK
-+# endif
-+# define machine_is_fred_jack() (machine_arch_type == MACH_TYPE_FRED_JACK)
-+#else
-+# define machine_is_fred_jack() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TTG_COLOR1
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_TTG_COLOR1
-+# endif
-+# define machine_is_ttg_color1() (machine_arch_type == MACH_TYPE_TTG_COLOR1)
-+#else
-+# define machine_is_ttg_color1() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NXEB500HMI
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NXEB500HMI
-+# endif
-+# define machine_is_nxeb500hmi() (machine_arch_type == MACH_TYPE_NXEB500HMI)
-+#else
-+# define machine_is_nxeb500hmi() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NETDCU8
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NETDCU8
-+# endif
-+# define machine_is_netdcu8() (machine_arch_type == MACH_TYPE_NETDCU8)
-+#else
-+# define machine_is_netdcu8() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ML675050_CPU_BOA
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ML675050_CPU_BOA
-+# endif
-+# define machine_is_ml675050_cpu_boa() (machine_arch_type == MACH_TYPE_ML675050_CPU_BOA)
-+#else
-+# define machine_is_ml675050_cpu_boa() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NG_FVX538
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NG_FVX538
-+# endif
-+# define machine_is_ng_fvx538() (machine_arch_type == MACH_TYPE_NG_FVX538)
-+#else
-+# define machine_is_ng_fvx538() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NG_FVS338
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NG_FVS338
-+# endif
-+# define machine_is_ng_fvs338() (machine_arch_type == MACH_TYPE_NG_FVS338)
-+#else
-+# define machine_is_ng_fvs338() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PNX4103
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PNX4103
-+# endif
-+# define machine_is_pnx4103() (machine_arch_type == MACH_TYPE_PNX4103)
-+#else
-+# define machine_is_pnx4103() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HESDB
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_HESDB
-+# endif
-+# define machine_is_hesdb() (machine_arch_type == MACH_TYPE_HESDB)
-+#else
-+# define machine_is_hesdb() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_XSILO
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_XSILO
-+# endif
-+# define machine_is_xsilo() (machine_arch_type == MACH_TYPE_XSILO)
-+#else
-+# define machine_is_xsilo() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ESPRESSO
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ESPRESSO
-+# endif
-+# define machine_is_espresso() (machine_arch_type == MACH_TYPE_ESPRESSO)
-+#else
-+# define machine_is_espresso() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EMLC
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_EMLC
-+# endif
-+# define machine_is_emlc() (machine_arch_type == MACH_TYPE_EMLC)
-+#else
-+# define machine_is_emlc() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SISTERON
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SISTERON
-+# endif
-+# define machine_is_sisteron() (machine_arch_type == MACH_TYPE_SISTERON)
-+#else
-+# define machine_is_sisteron() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_RX1950
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_RX1950
-+# endif
-+# define machine_is_rx1950() (machine_arch_type == MACH_TYPE_RX1950)
-+#else
-+# define machine_is_rx1950() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TSC_VENUS
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_TSC_VENUS
-+# endif
-+# define machine_is_tsc_venus() (machine_arch_type == MACH_TYPE_TSC_VENUS)
-+#else
-+# define machine_is_tsc_venus() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DS101J
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DS101J
-+# endif
-+# define machine_is_ds101j() (machine_arch_type == MACH_TYPE_DS101J)
-+#else
-+# define machine_is_ds101j() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MXC30030ADS
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MXC30030ADS
-+# endif
-+# define machine_is_mxc30030ads() (machine_arch_type == MACH_TYPE_MXC30030ADS)
-+#else
-+# define machine_is_mxc30030ads() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_FUJITSU_WIMAXSOC
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_FUJITSU_WIMAXSOC
-+# endif
-+# define machine_is_fujitsu_wimaxsoc() (machine_arch_type == MACH_TYPE_FUJITSU_WIMAXSOC)
-+#else
-+# define machine_is_fujitsu_wimaxsoc() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DUALPCMODEM
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DUALPCMODEM
-+# endif
-+# define machine_is_dualpcmodem() (machine_arch_type == MACH_TYPE_DUALPCMODEM)
-+#else
-+# define machine_is_dualpcmodem() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_GESBC9312
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_GESBC9312
-+# endif
-+# define machine_is_gesbc9312() (machine_arch_type == MACH_TYPE_GESBC9312)
-+#else
-+# define machine_is_gesbc9312() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HTCAPACHE
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_HTCAPACHE
-+# endif
-+# define machine_is_htcapache() (machine_arch_type == MACH_TYPE_HTCAPACHE)
-+#else
-+# define machine_is_htcapache() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IXDP435
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IXDP435
-+# endif
-+# define machine_is_ixdp435() (machine_arch_type == MACH_TYPE_IXDP435)
-+#else
-+# define machine_is_ixdp435() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CATPROVT100
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CATPROVT100
-+# endif
-+# define machine_is_catprovt100() (machine_arch_type == MACH_TYPE_CATPROVT100)
-+#else
-+# define machine_is_catprovt100() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PICOTUX1XX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PICOTUX1XX
-+# endif
-+# define machine_is_picotux1xx() (machine_arch_type == MACH_TYPE_PICOTUX1XX)
-+#else
-+# define machine_is_picotux1xx() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PICOTUX2XX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PICOTUX2XX
-+# endif
-+# define machine_is_picotux2xx() (machine_arch_type == MACH_TYPE_PICOTUX2XX)
-+#else
-+# define machine_is_picotux2xx() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DSMG600
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DSMG600
-+# endif
-+# define machine_is_dsmg600() (machine_arch_type == MACH_TYPE_DSMG600)
-+#else
-+# define machine_is_dsmg600() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EMPC2
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_EMPC2
-+# endif
-+# define machine_is_empc2() (machine_arch_type == MACH_TYPE_EMPC2)
-+#else
-+# define machine_is_empc2() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_VENTURA
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_VENTURA
-+# endif
-+# define machine_is_ventura() (machine_arch_type == MACH_TYPE_VENTURA)
-+#else
-+# define machine_is_ventura() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PHIDGET_SBC
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PHIDGET_SBC
-+# endif
-+# define machine_is_phidget_sbc() (machine_arch_type == MACH_TYPE_PHIDGET_SBC)
-+#else
-+# define machine_is_phidget_sbc() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IJ3K
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IJ3K
-+# endif
-+# define machine_is_ij3k() (machine_arch_type == MACH_TYPE_IJ3K)
-+#else
-+# define machine_is_ij3k() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PISGAH
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PISGAH
-+# endif
-+# define machine_is_pisgah() (machine_arch_type == MACH_TYPE_PISGAH)
-+#else
-+# define machine_is_pisgah() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_FSAMPLE
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_FSAMPLE
-+# endif
-+# define machine_is_omap_fsample() (machine_arch_type == MACH_TYPE_OMAP_FSAMPLE)
-+#else
-+# define machine_is_omap_fsample() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SG720
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SG720
-+# endif
-+# define machine_is_sg720() (machine_arch_type == MACH_TYPE_SG720)
-+#else
-+# define machine_is_sg720() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_REDFOX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_REDFOX
-+# endif
-+# define machine_is_redfox() (machine_arch_type == MACH_TYPE_REDFOX)
-+#else
-+# define machine_is_redfox() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MYSH_EP9315_1
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MYSH_EP9315_1
-+# endif
-+# define machine_is_mysh_ep9315_1() (machine_arch_type == MACH_TYPE_MYSH_EP9315_1)
-+#else
-+# define machine_is_mysh_ep9315_1() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TPF106
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_TPF106
-+# endif
-+# define machine_is_tpf106() (machine_arch_type == MACH_TYPE_TPF106)
-+#else
-+# define machine_is_tpf106() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AT91RM9200KG
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_AT91RM9200KG
-+# endif
-+# define machine_is_at91rm9200kg() (machine_arch_type == MACH_TYPE_AT91RM9200KG)
-+#else
-+# define machine_is_at91rm9200kg() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SLEDB
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SLEDB
-+# endif
-+# define machine_is_racemt2() (machine_arch_type == MACH_TYPE_SLEDB)
-+#else
-+# define machine_is_racemt2() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ONTRACK
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ONTRACK
-+# endif
-+# define machine_is_ontrack() (machine_arch_type == MACH_TYPE_ONTRACK)
-+#else
-+# define machine_is_ontrack() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PM1200
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PM1200
-+# endif
-+# define machine_is_pm1200() (machine_arch_type == MACH_TYPE_PM1200)
-+#else
-+# define machine_is_pm1200() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ESS24XXX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ESS24XXX
-+# endif
-+# define machine_is_ess24562() (machine_arch_type == MACH_TYPE_ESS24XXX)
-+#else
-+# define machine_is_ess24562() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_COREMP7
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_COREMP7
-+# endif
-+# define machine_is_coremp7() (machine_arch_type == MACH_TYPE_COREMP7)
-+#else
-+# define machine_is_coremp7() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NEXCODER_6446
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NEXCODER_6446
-+# endif
-+# define machine_is_nexcoder_6446() (machine_arch_type == MACH_TYPE_NEXCODER_6446)
-+#else
-+# define machine_is_nexcoder_6446() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_STVC8380
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_STVC8380
-+# endif
-+# define machine_is_stvc8380() (machine_arch_type == MACH_TYPE_STVC8380)
-+#else
-+# define machine_is_stvc8380() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TEKLYNX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_TEKLYNX
-+# endif
-+# define machine_is_teklynx() (machine_arch_type == MACH_TYPE_TEKLYNX)
-+#else
-+# define machine_is_teklynx() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CARBONADO
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CARBONADO
-+# endif
-+# define machine_is_carbonado() (machine_arch_type == MACH_TYPE_CARBONADO)
-+#else
-+# define machine_is_carbonado() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SYSMOS_MP730
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SYSMOS_MP730
-+# endif
-+# define machine_is_sysmos_mp730() (machine_arch_type == MACH_TYPE_SYSMOS_MP730)
-+#else
-+# define machine_is_sysmos_mp730() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SNAPPER_CL15
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SNAPPER_CL15
-+# endif
-+# define machine_is_snapper_cl15() (machine_arch_type == MACH_TYPE_SNAPPER_CL15)
-+#else
-+# define machine_is_snapper_cl15() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PGIGIM
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PGIGIM
-+# endif
-+# define machine_is_pgigim() (machine_arch_type == MACH_TYPE_PGIGIM)
-+#else
-+# define machine_is_pgigim() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PTX9160P2
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PTX9160P2
-+# endif
-+# define machine_is_ptx9160p2() (machine_arch_type == MACH_TYPE_PTX9160P2)
-+#else
-+# define machine_is_ptx9160p2() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DCORE1
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DCORE1
-+# endif
-+# define machine_is_dcore1() (machine_arch_type == MACH_TYPE_DCORE1)
-+#else
-+# define machine_is_dcore1() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_VICTORPXA
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_VICTORPXA
-+# endif
-+# define machine_is_victorpxa() (machine_arch_type == MACH_TYPE_VICTORPXA)
-+#else
-+# define machine_is_victorpxa() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MX2DTB
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MX2DTB
-+# endif
-+# define machine_is_mx2dtb() (machine_arch_type == MACH_TYPE_MX2DTB)
-+#else
-+# define machine_is_mx2dtb() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PXA_IREX_ER0100
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PXA_IREX_ER0100
-+# endif
-+# define machine_is_pxa_irex_er0100() (machine_arch_type == MACH_TYPE_PXA_IREX_ER0100)
-+#else
-+# define machine_is_pxa_irex_er0100() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_PALMZ71
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_PALMZ71
-+# endif
-+# define machine_is_omap_palmz71() (machine_arch_type == MACH_TYPE_OMAP_PALMZ71)
-+#else
-+# define machine_is_omap_palmz71() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BARTEC_DEG
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_BARTEC_DEG
-+# endif
-+# define machine_is_bartec_deg() (machine_arch_type == MACH_TYPE_BARTEC_DEG)
-+#else
-+# define machine_is_bartec_deg() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HW50251
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_HW50251
-+# endif
-+# define machine_is_hw50251() (machine_arch_type == MACH_TYPE_HW50251)
-+#else
-+# define machine_is_hw50251() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IBOX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IBOX
-+# endif
-+# define machine_is_ibox() (machine_arch_type == MACH_TYPE_IBOX)
-+#else
-+# define machine_is_ibox() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ATLASLH7A404
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ATLASLH7A404
-+# endif
-+# define machine_is_atlaslh7a404() (machine_arch_type == MACH_TYPE_ATLASLH7A404)
-+#else
-+# define machine_is_atlaslh7a404() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PT2026
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PT2026
-+# endif
-+# define machine_is_pt2026() (machine_arch_type == MACH_TYPE_PT2026)
-+#else
-+# define machine_is_pt2026() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HTCALPINE
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_HTCALPINE
-+# endif
-+# define machine_is_htcalpine() (machine_arch_type == MACH_TYPE_HTCALPINE)
-+#else
-+# define machine_is_htcalpine() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BARTEC_VTU
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_BARTEC_VTU
-+# endif
-+# define machine_is_bartec_vtu() (machine_arch_type == MACH_TYPE_BARTEC_VTU)
-+#else
-+# define machine_is_bartec_vtu() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_VCOREII
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_VCOREII
-+# endif
-+# define machine_is_vcoreii() (machine_arch_type == MACH_TYPE_VCOREII)
-+#else
-+# define machine_is_vcoreii() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PDNB3
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PDNB3
-+# endif
-+# define machine_is_pdnb3() (machine_arch_type == MACH_TYPE_PDNB3)
-+#else
-+# define machine_is_pdnb3() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HTCBEETLES
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_HTCBEETLES
-+# endif
-+# define machine_is_htcbeetles() (machine_arch_type == MACH_TYPE_HTCBEETLES)
-+#else
-+# define machine_is_htcbeetles() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_S3C6400
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_S3C6400
-+# endif
-+# define machine_is_s3c6400() (machine_arch_type == MACH_TYPE_S3C6400)
-+#else
-+# define machine_is_s3c6400() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_S3C2443
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_S3C2443
-+# endif
-+# define machine_is_s3c2443() (machine_arch_type == MACH_TYPE_S3C2443)
-+#else
-+# define machine_is_s3c2443() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_LDK
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_LDK
-+# endif
-+# define machine_is_omap_ldk() (machine_arch_type == MACH_TYPE_OMAP_LDK)
-+#else
-+# define machine_is_omap_ldk() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SMDK2460
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SMDK2460
-+# endif
-+# define machine_is_smdk2460() (machine_arch_type == MACH_TYPE_SMDK2460)
-+#else
-+# define machine_is_smdk2460() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SMDK2440
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SMDK2440
-+# endif
-+# define machine_is_smdk2440() (machine_arch_type == MACH_TYPE_SMDK2440)
-+#else
-+# define machine_is_smdk2440() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SMDK2412
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SMDK2412
-+# endif
-+# define machine_is_smdk2412() (machine_arch_type == MACH_TYPE_SMDK2412)
-+#else
-+# define machine_is_smdk2412() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_WEBBOX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_WEBBOX
-+# endif
-+# define machine_is_webbox() (machine_arch_type == MACH_TYPE_WEBBOX)
-+#else
-+# define machine_is_webbox() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CWWNDP
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CWWNDP
-+# endif
-+# define machine_is_cwwndp() (machine_arch_type == MACH_TYPE_CWWNDP)
-+#else
-+# define machine_is_cwwndp() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DRAGON
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DRAGON
-+# endif
-+# define machine_is_dragon() (machine_arch_type == MACH_TYPE_DRAGON)
-+#else
-+# define machine_is_dragon() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OPENDO_CPU_BOARD
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OPENDO_CPU_BOARD
-+# endif
-+# define machine_is_opendo_cpu_board() (machine_arch_type == MACH_TYPE_OPENDO_CPU_BOARD)
-+#else
-+# define machine_is_opendo_cpu_board() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CCM2200
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CCM2200
-+# endif
-+# define machine_is_ccm2200() (machine_arch_type == MACH_TYPE_CCM2200)
-+#else
-+# define machine_is_ccm2200() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ETWARM
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ETWARM
-+# endif
-+# define machine_is_etwarm() (machine_arch_type == MACH_TYPE_ETWARM)
-+#else
-+# define machine_is_etwarm() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_M93030
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_M93030
-+# endif
-+# define machine_is_m93030() (machine_arch_type == MACH_TYPE_M93030)
-+#else
-+# define machine_is_m93030() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CC7U
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CC7U
-+# endif
-+# define machine_is_cc7u() (machine_arch_type == MACH_TYPE_CC7U)
-+#else
-+# define machine_is_cc7u() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MTT_RANGER
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MTT_RANGER
-+# endif
-+# define machine_is_mtt_ranger() (machine_arch_type == MACH_TYPE_MTT_RANGER)
-+#else
-+# define machine_is_mtt_ranger() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NEXUS
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NEXUS
-+# endif
-+# define machine_is_nexus() (machine_arch_type == MACH_TYPE_NEXUS)
-+#else
-+# define machine_is_nexus() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DESMAN
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DESMAN
-+# endif
-+# define machine_is_desman() (machine_arch_type == MACH_TYPE_DESMAN)
-+#else
-+# define machine_is_desman() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BKDE303
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_BKDE303
-+# endif
-+# define machine_is_bkde303() (machine_arch_type == MACH_TYPE_BKDE303)
-+#else
-+# define machine_is_bkde303() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SMDK2413
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SMDK2413
-+# endif
-+# define machine_is_smdk2413() (machine_arch_type == MACH_TYPE_SMDK2413)
-+#else
-+# define machine_is_smdk2413() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AML_M7200
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_AML_M7200
-+# endif
-+# define machine_is_aml_m7200() (machine_arch_type == MACH_TYPE_AML_M7200)
-+#else
-+# define machine_is_aml_m7200() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AML_M5900
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_AML_M5900
-+# endif
-+# define machine_is_aml_m5900() (machine_arch_type == MACH_TYPE_AML_M5900)
-+#else
-+# define machine_is_aml_m5900() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SG640
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SG640
-+# endif
-+# define machine_is_sg640() (machine_arch_type == MACH_TYPE_SG640)
-+#else
-+# define machine_is_sg640() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EDG79524
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_EDG79524
-+# endif
-+# define machine_is_edg79524() (machine_arch_type == MACH_TYPE_EDG79524)
-+#else
-+# define machine_is_edg79524() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AI2410
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_AI2410
-+# endif
-+# define machine_is_ai2410() (machine_arch_type == MACH_TYPE_AI2410)
-+#else
-+# define machine_is_ai2410() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IXP465
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IXP465
-+# endif
-+# define machine_is_ixp465() (machine_arch_type == MACH_TYPE_IXP465)
-+#else
-+# define machine_is_ixp465() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BALLOON3
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_BALLOON3
-+# endif
-+# define machine_is_balloon3() (machine_arch_type == MACH_TYPE_BALLOON3)
-+#else
-+# define machine_is_balloon3() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_QT2410
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_QT2410
-+# endif
-+# define machine_is_qt2410() (machine_arch_type == MACH_TYPE_QT2410)
-+#else
-+# define machine_is_qt2410() (0)
-+#endif
-+
- /*
- * These have not yet been registered
- */
-diff --git a/include/configs/qt2410.h b/include/configs/qt2410.h
-new file mode 100644
-index 0000000..627f365
---- /dev/null
-+++ b/include/configs/qt2410.h
-@@ -0,0 +1,256 @@
-+/*
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Marius Groeger <mgroeger at sysgo.de>
-+ * Gary Jennejohn <gj at denx.de>
-+ * David Mueller <d.mueller at elsoft.ch>
-+ *
-+ * Configuation settings for the SAMSUNG SMDK2410 board.
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#if 0
-+/* If we want to start u-boot from usb bootloader in NOR flash */
-+#define CONFIG_SKIP_RELOCATE_UBOOT 1
-+#define CONFIG_SKIP_LOWLEVEL_INIT 1
-+#else
-+/* If we want to start u-boot directly from within NAND flash */
-+#define CONFIG_S3C2410_NAND_BOOT 1
-+#endif
-+
-+/*
-+ * High Level Configuration Options
-+ * (easy to change)
-+ */
-+#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-+#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */
-+#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */
-+
-+/* input clock of PLL */
-+#define CONFIG_SYS_CLK_FREQ 12000000/* the SMDK2410 has 12MHz input clock */
-+
-+
-+#define USE_920T_MMU 1
-+#define CONFIG_USE_IRQ 1
-+//#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-+
-+/*
-+ * Size of malloc() pool
-+ */
-+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
-+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-+
-+/*
-+ * Hardware drivers
-+ */
-+#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */
-+#define CS8900_BASE 0x19000300
-+#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */
-+
-+/*
-+ * select serial console configuration
-+ */
-+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2410 */
-+#define CONFIG_HWFLOW 1
-+
-+/************************************************************
-+ * RTC
-+ ************************************************************/
-+#define CONFIG_RTC_S3C24X0 1
-+
-+/* allow to overwrite serial and ethaddr */
-+#define CONFIG_ENV_OVERWRITE
-+
-+#define CONFIG_BAUDRATE 115200
-+
-+/***********************************************************
-+ * Command definition
-+ ***********************************************************/
-+#define CONFIG_COMMANDS \
-+ (CONFIG_CMD_DFL | \
-+ CFG_CMD_BSP | \
-+ CFG_CMD_CACHE | \
-+ CFG_CMD_DATE | \
-+ CFG_CMD_DHCP | \
-+ CFG_CMD_DIAG | \
-+ CFG_CMD_ELF | \
-+ CFG_CMD_EXT2 | \
-+ CFG_CMD_FAT | \
-+ CFG_CMD_HWFLOW | \
-+ /* CFG_CMD_IDE | */ \
-+ /* CFG_CMD_IRQ | */ \
-+ CFG_CMD_JFFS2 | \
-+ CFG_CMD_MMC | \
-+ CFG_CMD_NAND | \
-+ CFG_CMD_PING | \
-+ CFG_CMD_PORTIO | \
-+ CFG_CMD_REGINFO | \
-+ CFG_CMD_SAVES | \
-+ CFG_CMD_USB)
-+
-+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-+#include <cmd_confdefs.h>
-+
-+#define CONFIG_BOOTDELAY 3
-+#define CONFIG_BOOTARGS "root=/dev/sda1 console=ttySAC0,115200 loglevel=8 rootdelay=10"
-+/*#define CONFIG_ETHADDR 08:00:3e:26:0a:5b */
-+#define CONFIG_NETMASK 255.255.255.0
-+#define CONFIG_IPADDR 10.0.0.110
-+#define CONFIG_SERVERIP 10.0.0.1
-+/*#define CONFIG_BOOTFILE "elinos-lart" */
-+#define CONFIG_BOOTCOMMAND "mmcinit; ext2load mmc 0 0x32000000 uImage; bootm 0x32000000"
-+
-+#define CONFIG_DOS_PARTITION 1
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-+/* what's this ? it's not used anywhere */
-+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-+#endif
-+
-+/*
-+ * Miscellaneous configurable options
-+ */
-+#define CFG_LONGHELP /* undef to save memory */
-+#define CFG_PROMPT "QT2410 # " /* Monitor Command Prompt */
-+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-+#define CFG_MAXARGS 16 /* max number of command args */
-+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-+
-+#define CFG_MEMTEST_START 0x30000000 /* memtest works on */
-+#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */
-+
-+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-+
-+#define CFG_LOAD_ADDR 0x33000000 /* default load address */
-+
-+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
-+/* it to wrap 100 times (total 1562500) to get 1 sec. */
-+#define CFG_HZ 1562500
-+
-+/* valid baudrates */
-+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-+
-+/*-----------------------------------------------------------------------
-+ * Stack sizes
-+ *
-+ * The stack sizes are set up in start.S using the settings below
-+ */
-+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-+#ifdef CONFIG_USE_IRQ
-+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-+#endif
-+
-+/* IDE/ATA config */
-+
-+#if 0
-+#define CFG_IDE_MAXBUS 1
-+#define CFG_IDE_MAXDEVICE 2
-+#define CFG_IDE_PREINIT 0
-+
-+#define CFG_ATA_BASE_ADDR
-+#endif
-+
-+#define CONFIG_USB_OHCI 1
-+
-+/*-----------------------------------------------------------------------
-+ * Physical Memory Map
-+ */
-+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-+#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */
-+#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-+#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */
-+
-+#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-+
-+#define CFG_FLASH_BASE PHYS_FLASH_1
-+
-+/*-----------------------------------------------------------------------
-+ * FLASH and environment organization
-+ */
-+
-+#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */
-+#if 0
-+#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */
-+#endif
-+
-+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-+#ifdef CONFIG_AMD_LV800
-+#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */
-+#define CFG_MAX_FLASH_SECT (19) /* max number of sectors on one chip */
-+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x0F0000) /* addr of environment */
-+#endif
-+#ifdef CONFIG_AMD_LV400
-+#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */
-+#define CFG_MAX_FLASH_SECT (11) /* max number of sectors on one chip */
-+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x070000) /* addr of environment */
-+#endif
-+
-+/* timeout values are in ticks */
-+#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */
-+#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */
-+
-+#define CFG_ENV_IS_IN_NAND 1
-+#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */
-+#define CFG_ENV_OFFSET 0x30000 /* environment after bootloader */
-+
-+#define NAND_MAX_CHIPS 1
-+#define CFG_NAND_BASE 0x4e000000
-+#define CFG_MAX_NAND_DEVICE 1
-+
-+#define CONFIG_MMC 1
-+#define CFG_MMC_BASE 0xff000000
-+
-+#define CONFIG_EXT2 1
-+
-+/* FAT driver in u-boot is broken currently */
-+#define CONFIG_FAT 1
-+#define CONFIG_SUPPORT_VFAT
-+
-+/* ATAG configuration */
-+#define CONFIG_INITRD_TAG 1
-+#define CONFIG_SETUP_MEMORY_TAGS 1
-+#define CONFIG_CMDLINE_TAG 1
-+#if 0
-+#define CONFIG_SERIAL_TAG 1
-+#define CONFIG_REVISION_TAG 1
-+#endif
-+
-+
-+#if 0
-+#define CONFIG_VIDEO
-+#define CONFIG_VIDEO_S3C2410
-+#define CONFIG_CFB_CONSOLE
-+#define CONFIG_VIDEO_LOGO
-+#define CONFIG_VGA_AS_SINGLE_DEVICE
-+
-+#define VIDEO_KBD_INIT_FCT 0
-+#define VIDEO_TSTC_FCT serial_tstc
-+#define VIDEO_GETC_FCT serial_getc
-+
-+#define LCD_VIDEO_ADDR 0x33d00000
-+#endif
-+
-+#endif /* __CONFIG_H */
-diff --git a/include/s3c2410.h b/include/s3c2410.h
-index 86495f6..913521d 100644
---- a/include/s3c2410.h
-+++ b/include/s3c2410.h
-@@ -38,12 +38,6 @@ #define S3C24X0_SPI_CHANNELS 2
- #define S3C2410_ECCSIZE 512
- #define S3C2410_ECCBYTES 3
-
--typedef enum {
-- S3C24X0_UART0,
-- S3C24X0_UART1,
-- S3C24X0_UART2
--} S3C24X0_UARTS_NR;
--
- /* S3C2410 device base addresses */
- #define S3C24X0_MEMCTL_BASE 0x48000000
- #define S3C24X0_USB_HOST_BASE 0x49000000
-@@ -65,9 +59,23 @@ #define S3C24X0_SPI_BASE 0x59000000
- #define S3C2410_SDI_BASE 0x5A000000
-
-
-+#define oNFCONF 0x00
-+#define oNFCMD 0x04
-+#define oNFADDR 0x08
-+#define oNFDATA 0x0C
-+#define oNFSTAT 0x10
-+#define oNFECC 0x14
-+
-+#ifndef __ASSEMBLER__
-+
- /* include common stuff */
- #include <s3c24x0.h>
-
-+typedef enum {
-+ S3C24X0_UART0,
-+ S3C24X0_UART1,
-+ S3C24X0_UART2
-+} S3C24X0_UARTS_NR;
-
- static inline S3C24X0_MEMCTL * const S3C24X0_GetBase_MEMCTL(void)
- {
-@@ -142,6 +150,7 @@ static inline S3C2410_SDI * const S3C241
- return (S3C2410_SDI * const)S3C2410_SDI_BASE;
- }
-
-+#endif
-
- /* ISR */
- #define pISR_RESET (*(unsigned *)(_ISR_STARTADDRESS+0x0))
-diff --git a/include/s3c24x0.h b/include/s3c24x0.h
-index 71f35a5..557b91f 100644
---- a/include/s3c24x0.h
-+++ b/include/s3c24x0.h
-@@ -637,13 +637,7 @@ typedef struct {
- S3C24X0_REG32 SDIDCNT;
- S3C24X0_REG32 SDIDSTA;
- S3C24X0_REG32 SDIFSTA;
--#ifdef __BIG_ENDIAN
-- S3C24X0_REG8 res[3];
-- S3C24X0_REG8 SDIDAT;
--#else
-- S3C24X0_REG8 SDIDAT;
-- S3C24X0_REG8 res[3];
--#endif
-+ S3C24X0_REG32 SDIDAT;
- S3C24X0_REG32 SDIIMSK;
- } /*__attribute__((__packed__))*/ S3C2410_SDI;
-
-@@ -1123,11 +1117,7 @@ #define rSDIDatCon (*(volatile unsigned
- #define rSDIDatCnt (*(volatile unsigned *)0x5A000030)
- #define rSDIDatSta (*(volatile unsigned *)0x5A000034)
- #define rSDIFSTA (*(volatile unsigned *)0x5A000038)
--#ifdef __BIG_ENDIAN
--#define rSDIDAT (*(volatile unsigned char *)0x5A00003F)
--#else
--#define rSDIDAT (*(volatile unsigned char *)0x5A00003C)
--#endif
-+#define rSDIDAT (*(volatile unsigned *)0x5A00003C)
- #define rSDIIntMsk (*(volatile unsigned *)0x5A000040)
-
- #endif
Deleted: trunk/oe/packages/uboot/files/u-boot-20060807.tar.bz2
===================================================================
(Binary files differ)
Deleted: trunk/oe/packages/uboot/files/u-boot-20060907-gta01.patch
===================================================================
--- trunk/oe/packages/uboot/files/u-boot-20060907-gta01.patch 2007-05-30 16:20:53 UTC (rev 2104)
+++ trunk/oe/packages/uboot/files/u-boot-20060907-gta01.patch 2007-05-30 22:10:24 UTC (rev 2105)
@@ -1,901 +0,0 @@
-diff --exclude .git -Nru u-boot/Makefile u-boot.new/Makefile
---- u-boot/Makefile 2006-08-11 23:19:07.000000000 +0200
-+++ u-boot.new/Makefile 2006-10-26 13:02:41.000000000 +0200
-@@ -1641,6 +1641,9 @@
- qt2410_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t qt2410 NULL s3c24x0
-
-+gta01_config : unconfig
-+ @./mkconfig $(@:_config=) arm arm920t gta01 NULL s3c24x0
-+
- scb9328_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t scb9328 NULL imx
-
-diff --exclude .git -Nru u-boot/board/gta01/Makefile u-boot.new/board/gta01/Makefile
---- u-boot/board/gta01/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot.new/board/gta01/Makefile 2006-10-25 17:21:44.000000000 +0200
-@@ -0,0 +1,47 @@
-+#
-+# (C) Copyright 2000, 2001, 2002
-+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB = lib$(BOARD).a
-+
-+OBJS := gta01.o
-+SOBJS := lowlevel_init.o
-+
-+$(LIB): $(OBJS) $(SOBJS)
-+ $(AR) crv $@ $(OBJS) $(SOBJS)
-+
-+clean:
-+ rm -f $(SOBJS) $(OBJS)
-+
-+distclean: clean
-+ rm -f $(LIB) core *.bak .depend
-+
-+#########################################################################
-+
-+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
-+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-+
-+-include .depend
-+
-+#########################################################################
-diff --exclude .git -Nru u-boot/board/gta01/config.mk u-boot.new/board/gta01/config.mk
---- u-boot/board/gta01/config.mk 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot.new/board/gta01/config.mk 2006-10-25 17:22:09.000000000 +0200
-@@ -0,0 +1,25 @@
-+#
-+# (C) Copyright 2002
-+# Gary Jennejohn, DENX Software Engineering, <gj at denx.de>
-+# David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
-+#
-+# FIC GTA01 board with S3C2410X (ARM920T) cpu
-+#
-+# see http://www.samsung.com/ for more information on SAMSUNG
-+#
-+
-+#
-+# GTA01 has 1 bank of 64 MB DRAM
-+#
-+# 3000'0000 to 3400'0000
-+#
-+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
-+# optionally with a ramdisk at 3080'0000
-+#
-+# we load ourself to 33F8'0000
-+#
-+# download area is 3300'0000
-+#
-+
-+
-+TEXT_BASE = 0x33F80000
-diff --exclude .git -Nru u-boot/board/gta01/gta01.c u-boot.new/board/gta01/gta01.c
---- u-boot/board/gta01/gta01.c 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot.new/board/gta01/gta01.c 2006-10-25 17:27:50.000000000 +0200
-@@ -0,0 +1,133 @@
-+/*
-+ * (C) 2006 by Harald Welte <hwelte at hmw-consulting.de>
-+ *
-+ * based on existing S3C2410 startup code in u-boot:
-+ *
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Marius Groeger <mgroeger at sysgo.de>
-+ *
-+ * (C) Copyright 2002
-+ * David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <s3c2410.h>
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+#if 1
-+//#define M_MDIV 0xA1 /* Fout = 202.8MHz */
-+//#define M_PDIV 0x3
-+//#define M_SDIV 0x1
-+#define M_MDIV 0x90 /* Fout = 202.8MHz */
-+#define M_PDIV 0x7
-+#define M_SDIV 0x0
-+#else
-+#define M_MDIV 0x5c /* Fout = 150.0MHz */
-+#define M_PDIV 0x4
-+#define M_SDIV 0x0
-+#endif
-+
-+#if 1
-+#define U_M_MDIV 0x78
-+#define U_M_PDIV 0x2
-+#define U_M_SDIV 0x3
-+#else
-+#define U_M_MDIV 0x48
-+#define U_M_PDIV 0x3
-+#define U_M_SDIV 0x2
-+#endif
-+
-+static inline void delay (unsigned long loops)
-+{
-+ __asm__ volatile ("1:\n"
-+ "subs %0, %1, #1\n"
-+ "bne 1b":"=r" (loops):"0" (loops));
-+}
-+
-+/*
-+ * Miscellaneous platform dependent initialisations
-+ */
-+
-+int board_init (void)
-+{
-+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+
-+ /* to reduce PLL lock time, adjust the LOCKTIME register */
-+ clk_power->LOCKTIME = 0xFFFFFF;
-+
-+ /* configure MPLL */
-+ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
-+
-+ /* some delay between MPLL and UPLL */
-+ delay (4000);
-+
-+ /* configure UPLL */
-+ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
-+
-+ /* some delay between MPLL and UPLL */
-+ delay (8000);
-+
-+ /* set up the I/O ports */
-+ gpio->GPACON = 0x007FFFFF;
-+
-+ gpio->GPBCON = 0x00005056;
-+ gpio->GPBUP = 0x000007FF;
-+
-+ gpio->GPCCON = 0xAAAA12A8;
-+ gpio->GPCUP = 0x0000FFFF;
-+
-+ gpio->GPDCON = 0xAAAAAAAA;
-+ gpio->GPDUP = 0x0000FFFF;
-+
-+ gpio->GPECON = 0xAAAAAAAA;
-+ gpio->GPEUP = 0x0000FFFF;
-+
-+ gpio->GPFCON = 0x00002AA9;
-+ gpio->GPFUP = 0x000000FF;
-+
-+ gpio->GPGCON = 0xA846F0C0;
-+ gpio->GPGUP = 0x0000AFEF;
-+
-+ gpio->GPHCON = 0x0008FAAA;
-+ gpio->GPHUP = 0x000007FF;
-+
-+ /* arch number of SMDK2410-Board */
-+ gd->bd->bi_arch_number = MACH_TYPE_GTA01;
-+
-+ /* adress of boot parameters */
-+ gd->bd->bi_boot_params = 0x30000100;
-+
-+ icache_enable();
-+ dcache_enable();
-+
-+ return 0;
-+}
-+
-+int dram_init (void)
-+{
-+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-+
-+ return 0;
-+}
-diff --exclude .git -Nru u-boot/board/gta01/lowlevel_init.S u-boot.new/board/gta01/lowlevel_init.S
---- u-boot/board/gta01/lowlevel_init.S 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot.new/board/gta01/lowlevel_init.S 2006-10-25 17:20:42.000000000 +0200
-@@ -0,0 +1,171 @@
-+/*
-+ * Memory Setup stuff - taken from blob memsetup.S
-+ *
-+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
-+ * Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
-+ *
-+ * Modified for the FIC GTA01 by Harald Welte <hwelte at hmw-consulting.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+
-+#include <config.h>
-+#include <version.h>
-+
-+
-+/* some parameters for the board */
-+
-+/*
-+ *
-+ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S
-+ *
-+ * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar at sec.samsung.com>
-+ *
-+ */
-+
-+#define BWSCON 0x48000000
-+
-+/* BWSCON */
-+#define DW8 (0x0)
-+#define DW16 (0x1)
-+#define DW32 (0x2)
-+#define WAIT (0x1<<2)
-+#define UBLB (0x1<<3)
-+
-+#define B1_BWSCON (DW32)
-+#define B2_BWSCON (DW16)
-+#define B3_BWSCON (DW16 + WAIT + UBLB)
-+#define B4_BWSCON (DW16)
-+#define B5_BWSCON (DW16)
-+#define B6_BWSCON (DW32)
-+#define B7_BWSCON (DW32)
-+
-+/* BANK0CON */
-+#define B0_Tacs 0x0 /* 0clk */
-+#define B0_Tcos 0x0 /* 0clk */
-+#define B0_Tacc 0x7 /* 14clk */
-+#define B0_Tcoh 0x0 /* 0clk */
-+#define B0_Tah 0x0 /* 0clk */
-+#define B0_Tacp 0x0
-+#define B0_PMC 0x0 /* normal */
-+
-+/* BANK1CON */
-+#define B1_Tacs 0x0 /* 0clk */
-+#define B1_Tcos 0x0 /* 0clk */
-+#define B1_Tacc 0x7 /* 14clk */
-+#define B1_Tcoh 0x0 /* 0clk */
-+#define B1_Tah 0x0 /* 0clk */
-+#define B1_Tacp 0x0
-+#define B1_PMC 0x0
-+
-+#define B2_Tacs 0x0
-+#define B2_Tcos 0x0
-+#define B2_Tacc 0x7
-+#define B2_Tcoh 0x0
-+#define B2_Tah 0x0
-+#define B2_Tacp 0x0
-+#define B2_PMC 0x0
-+
-+#define B3_Tacs 0x0 /* 0clk */
-+#define B3_Tcos 0x3 /* 4clk */
-+#define B3_Tacc 0x7 /* 14clk */
-+#define B3_Tcoh 0x1 /* 1clk */
-+#define B3_Tah 0x0 /* 0clk */
-+#define B3_Tacp 0x3 /* 6clk */
-+#define B3_PMC 0x0 /* normal */
-+
-+#define B4_Tacs 0x0 /* 0clk */
-+#define B4_Tcos 0x0 /* 0clk */
-+#define B4_Tacc 0x7 /* 14clk */
-+#define B4_Tcoh 0x0 /* 0clk */
-+#define B4_Tah 0x0 /* 0clk */
-+#define B4_Tacp 0x0
-+#define B4_PMC 0x0 /* normal */
-+
-+#define B5_Tacs 0x0 /* 0clk */
-+#define B5_Tcos 0x0 /* 0clk */
-+#define B5_Tacc 0x7 /* 14clk */
-+#define B5_Tcoh 0x0 /* 0clk */
-+#define B5_Tah 0x0 /* 0clk */
-+#define B5_Tacp 0x0
-+#define B5_PMC 0x0 /* normal */
-+
-+#define B6_MT 0x3 /* SDRAM */
-+#define B6_Trcd 0x1
-+#define B6_SCAN 0x1 /* 9bit */
-+
-+#define B7_MT 0x3 /* SDRAM */
-+#define B7_Trcd 0x1 /* 3clk */
-+#define B7_SCAN 0x1 /* 9bit */
-+
-+/* REFRESH parameter */
-+#define REFEN 0x1 /* Refresh enable */
-+#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */
-+#define Trp 0x1 /* 3clk */
-+#define Trc 0x3 /* 7clk */
-+#define Tchr 0x2 /* 3clk */
-+//#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */
-+#define REFCNT 997 /* period=17.5us, HCLK=60Mhz, (2048+1-15.6*60) */
-+/**************************************/
-+
-+_TEXT_BASE:
-+ .word TEXT_BASE
-+
-+.globl lowlevel_init
-+lowlevel_init:
-+ /* memory control configuration */
-+ /* make r0 relative the current location so that it */
-+ /* reads SMRDATA out of FLASH rather than memory ! */
-+ ldr r0, =SMRDATA
-+ ldr r1, _TEXT_BASE
-+ sub r0, r0, r1
-+ ldr r1, =BWSCON /* Bus Width Status Controller */
-+ add r2, r0, #13*4
-+0:
-+ ldr r3, [r0], #4
-+ str r3, [r1], #4
-+ cmp r2, r0
-+ bne 0b
-+
-+ /* setup asynchronous bus mode */
-+ mrc p15, 0, r1 ,c1 ,c0, 0
-+ orr r1, r1, #0xc0000000
-+ mcr p15, 0, r1, c1, c0, 0
-+
-+ /* everything is fine now */
-+ mov pc, lr
-+
-+ .ltorg
-+/* the literal pools origin */
-+
-+SMRDATA:
-+ .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28))
-+ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))
-+ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))
-+ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))
-+ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))
-+ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))
-+ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))
-+ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
-+ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
-+ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
-+ .word 0xb2
-+ .word 0x30
-+ .word 0x30
-diff --exclude .git -Nru u-boot/board/gta01/u-boot.lds u-boot.new/board/gta01/u-boot.lds
---- u-boot/board/gta01/u-boot.lds 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot.new/board/gta01/u-boot.lds 2006-10-25 17:28:02.000000000 +0200
-@@ -0,0 +1,57 @@
-+/*
-+ * (C) Copyright 2002
-+ * Gary Jennejohn, DENX Software Engineering, <gj at denx.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
-+OUTPUT_ARCH(arm)
-+ENTRY(_start)
-+SECTIONS
-+{
-+ . = 0x00000000;
-+
-+ . = ALIGN(4);
-+ .text :
-+ {
-+ cpu/arm920t/start.o (.text)
-+ *(.text)
-+ }
-+
-+ . = ALIGN(4);
-+ .rodata : { *(.rodata) }
-+
-+ . = ALIGN(4);
-+ .data : { *(.data) }
-+
-+ . = ALIGN(4);
-+ .got : { *(.got) }
-+
-+ . = .;
-+ __u_boot_cmd_start = .;
-+ .u_boot_cmd : { *(.u_boot_cmd) }
-+ __u_boot_cmd_end = .;
-+
-+ . = ALIGN(4);
-+ __bss_start = .;
-+ .bss : { *(.bss) }
-+ _end = .;
-+}
-diff --exclude .git -Nru u-boot/board/qt2410/qt2410.c.old u-boot.new/board/qt2410/qt2410.c.old
---- u-boot/board/qt2410/qt2410.c.old 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot.new/board/qt2410/qt2410.c.old 2006-10-10 11:09:43.000000000 +0200
-@@ -0,0 +1,127 @@
-+/*
-+ * (C) 2006 by Harald Welte <hwelte at hmw-consulting.de>
-+ *
-+ * based on existing S3C2410 startup code in u-boot:
-+ *
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Marius Groeger <mgroeger at sysgo.de>
-+ *
-+ * (C) Copyright 2002
-+ * David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <s3c2410.h>
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+#if 1
-+#define M_MDIV 0xA1 /* Fout = 202.8MHz */
-+#define M_PDIV 0x3
-+#define M_SDIV 0x1
-+//#define M_MDIV 0x90 /* Fout = 202.8MHz */
-+//#define M_PDIV 0x7
-+//#define M_SDIV 0x0
-+#else
-+#define M_MDIV 0x5c /* Fout = 150.0MHz */
-+#define M_PDIV 0x4
-+#define M_SDIV 0x0
-+#endif
-+
-+#if 1
-+#define U_M_MDIV 0x78
-+#define U_M_PDIV 0x2
-+#define U_M_SDIV 0x3
-+#else
-+#define U_M_MDIV 0x48
-+#define U_M_PDIV 0x3
-+#define U_M_SDIV 0x2
-+#endif
-+
-+static inline void delay (unsigned long loops)
-+{
-+ __asm__ volatile ("1:\n"
-+ "subs %0, %1, #1\n"
-+ "bne 1b":"=r" (loops):"0" (loops));
-+}
-+
-+/*
-+ * Miscellaneous platform dependent initialisations
-+ */
-+
-+int board_init (void)
-+{
-+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+
-+ /* to reduce PLL lock time, adjust the LOCKTIME register */
-+ clk_power->LOCKTIME = 0xFFFFFF;
-+
-+ /* configure MPLL */
-+ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
-+
-+ /* some delay between MPLL and UPLL */
-+ delay (4000);
-+
-+ /* configure UPLL */
-+ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
-+
-+ /* some delay between MPLL and UPLL */
-+ delay (8000);
-+
-+ /* set up the I/O ports */
-+ gpio->GPACON = 0x007FFFFF;
-+ gpio->GPBCON = 0x00044555;
-+ gpio->GPBUP = 0x000007FF;
-+ gpio->GPCCON = 0xAAAAAAAA;
-+ gpio->GPCUP = 0x0000FFFF;
-+ gpio->GPDCON = 0xAAAAAAAA;
-+ gpio->GPDUP = 0x0000FFFF;
-+ gpio->GPECON = 0xAAAAAAAA;
-+ gpio->GPEUP = 0x0000FFFF;
-+ gpio->GPFCON = 0x000055AA;
-+ gpio->GPFUP = 0x000000FF;
-+ gpio->GPGCON = 0xFF95FFBA;
-+ //gpio->GPGUP = 0x0000FFFF;
-+ gpio->GPGUP = 0x0000AFEF;
-+ gpio->GPHCON = 0x0028FAAA;
-+ gpio->GPHUP = 0x000007FF;
-+
-+ /* arch number of SMDK2410-Board */
-+ gd->bd->bi_arch_number = MACH_TYPE_QT2410;
-+
-+ /* adress of boot parameters */
-+ gd->bd->bi_boot_params = 0x30000100;
-+
-+ icache_enable();
-+ dcache_enable();
-+
-+ return 0;
-+}
-+
-+int dram_init (void)
-+{
-+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-+
-+ return 0;
-+}
-diff --exclude .git -Nru u-boot/fs/cramfs/cramfs.c u-boot.new/fs/cramfs/cramfs.c
---- u-boot/fs/cramfs/cramfs.c 2006-07-14 12:41:02.000000000 +0200
-+++ u-boot.new/fs/cramfs/cramfs.c 2006-10-26 14:01:41.000000000 +0200
-@@ -27,7 +27,7 @@
- #include <common.h>
- #include <malloc.h>
-
--#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
-+#if (CONFIG_COMMANDS & CFG_CMD_CRAMFS)
-
- #include <asm/byteorder.h>
- #include <linux/stat.h>
-@@ -343,5 +343,22 @@
- }
- return 1;
- }
--
-+#else
-+int cramfs_load (char *loadoffset, struct part_info *info, char *filename)
-+{
-+ return -1;
-+}
-+int cramfs_ls (struct part_info *info, char *filename)
-+{
-+ return 0;
-+}
-+int cramfs_info (struct part_info *info)
-+{
-+ return 0;
-+}
-+int cramfs_check (struct part_info *info)
-+{
-+ return 0;
-+}
- #endif /* CFG_FS_CRAMFS */
-+
-diff --exclude .git -Nru u-boot/include/asm-arm/mach-types.h u-boot.new/include/asm-arm/mach-types.h
---- u-boot/include/asm-arm/mach-types.h 2006-08-11 23:19:07.000000000 +0200
-+++ u-boot.new/include/asm-arm/mach-types.h 2006-10-25 23:55:00.000000000 +0200
-@@ -1038,6 +1038,7 @@
- #define MACH_TYPE_IXP465 1028
- #define MACH_TYPE_BALLOON3 1029
- #define MACH_TYPE_QT2410 1108
-+#define MACH_TYPE_GTA01 1182
-
- #ifdef CONFIG_ARCH_EBSA110
- # ifdef machine_arch_type
-@@ -13327,6 +13328,19 @@
- # define machine_is_qt2410() (0)
- #endif
-
-+#ifdef CONFIG_MACH_GTA01
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_GTA01
-+# endif
-+# define machine_is_gta01() (machine_arch_type == MACH_TYPE_GTA01)
-+#else
-+# define machine_is_gta01() (0)
-+#endif
-+
-+
- /*
- * These have not yet been registered
- */
-diff --exclude .git -Nru u-boot/include/configs/gta01.h u-boot.new/include/configs/gta01.h
---- u-boot/include/configs/gta01.h 1970-01-01 01:00:00.000000000 +0100
-+++ u-boot.new/include/configs/gta01.h 2006-10-26 20:21:30.000000000 +0200
-@@ -0,0 +1,233 @@
-+/*
-+ * (C) Copyright 2006 Harald Welte <hwelte at hmw-consulting.de>
-+ *
-+ * Configuation settings for the FIC GTA01 Linux GSM phone
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+/* we want to start u-boot directly from within NAND flash */
-+#define CONFIG_S3C2410_NAND_BOOT 1
-+
-+/*
-+ * High Level Configuration Options
-+ * (easy to change)
-+ */
-+#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-+#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */
-+#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */
-+
-+/* input clock of PLL */
-+#define CONFIG_SYS_CLK_FREQ 12000000/* the GTA01 has 12MHz input clock */
-+
-+
-+#define USE_920T_MMU 1
-+#define CONFIG_USE_IRQ 1
-+
-+/*
-+ * Size of malloc() pool
-+ */
-+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
-+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-+
-+/*
-+ * Hardware drivers
-+ */
-+
-+/*
-+ * select serial console configuration
-+ */
-+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on GTA01 */
-+//#define CONFIG_HWFLOW 1
-+
-+/************************************************************
-+ * RTC
-+ ************************************************************/
-+#define CONFIG_RTC_S3C24X0 1
-+
-+/* allow to overwrite serial and ethaddr */
-+#define CONFIG_ENV_OVERWRITE
-+
-+#define CONFIG_BAUDRATE 115200
-+
-+/***********************************************************
-+ * Command definition
-+ ***********************************************************/
-+#define CONFIG_COMMANDS (\
-+ CFG_CMD_BDI | \
-+ CFG_CMD_LOADS | \
-+ CFG_CMD_LAODB | \
-+ CFG_CMD_IMI | \
-+ CFG_CMD_CACHE | \
-+ CFG_CMD_MEMORY | \
-+ CFG_CMD_ENV | \
-+ /* CFG_CMD_IRQ | */ \
-+ CFG_CMD_BOOTD | \
-+ CFG_CMD_CONSOLE | \
-+ CFG_CMD_ASKENV | \
-+ CFG_CMD_RUN | \
-+ CFG_CMD_ECHO | \
-+ CFG_CMD_I2C | \
-+ CFG_CMD_REGINFO | \
-+ CFG_CMD_IMMAP | \
-+ CFG_CMD_DATE | \
-+ CFG_CMD_AUTOSCRIPT | \
-+ CFG_CMD_BSP | \
-+ CFG_CMD_ELF | \
-+ CFG_CMD_MISC | \
-+ CFG_CMD_USB | \
-+ CFG_CMD_JFFS2 | \
-+ CFG_CMD_DIAG | \
-+ /* CFG_CMD_HWFLOW | */ \
-+ CFG_CMD_SAVES | \
-+ CFG_CMD_NAND | \
-+ CFG_CMD_PORTIO | \
-+ CFG_CMD_MMC | \
-+ CFG_CMD_FAT | \
-+ CFG_CMD_EXT2 | \
-+ 0)
-+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-+#include <cmd_confdefs.h>
-+
-+#define CONFIG_BOOTDELAY 3
-+#define CONFIG_BOOTARGS "rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8"
-+/*#define CONFIG_BOOTFILE "elinos-lart" */
-+#define CONFIG_BOOTCOMMAND "nand load 0x32000000 0x34000 0x200000; bootm 0x32000000"
-+
-+#define CONFIG_DOS_PARTITION 1
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-+/* what's this ? it's not used anywhere */
-+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-+#endif
-+
-+/*
-+ * Miscellaneous configurable options
-+ */
-+#define CFG_LONGHELP /* undef to save memory */
-+#define CFG_PROMPT "GTA01 # " /* Monitor Command Prompt */
-+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-+#define CFG_MAXARGS 16 /* max number of command args */
-+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-+
-+#define CFG_MEMTEST_START 0x30000000 /* memtest works on */
-+#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */
-+
-+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-+
-+#define CFG_LOAD_ADDR 0x33000000 /* default load address */
-+
-+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
-+/* it to wrap 100 times (total 1562500) to get 1 sec. */
-+#define CFG_HZ 1562500
-+
-+/* valid baudrates */
-+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-+
-+/*-----------------------------------------------------------------------
-+ * Stack sizes
-+ *
-+ * The stack sizes are set up in start.S using the settings below
-+ */
-+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-+#ifdef CONFIG_USE_IRQ
-+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-+#endif
-+
-+#define CONFIG_USB_OHCI 1
-+
-+/*-----------------------------------------------------------------------
-+ * Physical Memory Map
-+ */
-+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-+#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */
-+#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-+#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */
-+
-+/*-----------------------------------------------------------------------
-+ * FLASH and environment organization
-+ */
-+
-+#if 1
-+#define CFG_NO_FLASH 1
-+#else
-+#define CFG_MAX_FLASH_SECT 1
-+#define CFG_MAX_FLASH_BANKS 1
-+#endif
-+
-+#define CFG_ENV_IS_IN_NAND 1
-+#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */
-+#define CFG_ENV_OFFSET 0x30000 /* environment after bootloader */
-+
-+#define NAND_MAX_CHIPS 1
-+#define CFG_NAND_BASE 0x4e000000
-+#define CFG_MAX_NAND_DEVICE 1
-+
-+#define CONFIG_MMC 1
-+#define CFG_MMC_BASE 0xff000000
-+
-+/* EXT2 driver */
-+#define CONFIG_EXT2 1
-+
-+/* FAT driver in u-boot is broken currently */
-+#define CONFIG_FAT 1
-+#define CONFIG_SUPPORT_VFAT 1
-+
-+/* JFFS2 driver */
-+#define CONFIG_JFFS2_NAND 1
-+#define CONFIG_JFFS2_NAND_DEV 0
-+#define CONFIG_JFFS2_NAND_OFF 0x634000
-+#define CONFIG_JFFS2_NAND_SIZE 0x39cc000
-+
-+/* ATAG configuration */
-+#define CONFIG_INITRD_TAG 1
-+#define CONFIG_SETUP_MEMORY_TAGS 1
-+#define CONFIG_CMDLINE_TAG 1
-+#if 0
-+#define CONFIG_SERIAL_TAG 1
-+#define CONFIG_REVISION_TAG 1
-+#endif
-+
-+#define CONFIG_DRIVER_S3C24X0_I2C 1
-+#define CONFIG_HARD_I2C 1
-+#define CFG_I2C_SPEED 400000 /* 400kHz according to PCF50707 data sheet */
-+#define CFG_I2C_SLAVE 0x7f
-+
-+
-+#if 0
-+#define CONFIG_VIDEO
-+#define CONFIG_VIDEO_S3C2410
-+#define CONFIG_CFB_CONSOLE
-+#define CONFIG_VIDEO_LOGO
-+#define CONFIG_VGA_AS_SINGLE_DEVICE
-+
-+#define VIDEO_KBD_INIT_FCT 0
-+#define VIDEO_TSTC_FCT serial_tstc
-+#define VIDEO_GETC_FCT serial_getc
-+
-+#define LCD_VIDEO_ADDR 0x33d00000
-+#endif
-+
-+#endif /* __CONFIG_H */
Deleted: trunk/oe/packages/uboot/files/u-boot-20060907.tar.bz2
===================================================================
(Binary files differ)
Deleted: trunk/oe/packages/uboot/files/u-boot-20061030-ext2load_hex.patch
===================================================================
--- trunk/oe/packages/uboot/files/u-boot-20061030-ext2load_hex.patch 2007-05-30 16:20:53 UTC (rev 2104)
+++ trunk/oe/packages/uboot/files/u-boot-20061030-ext2load_hex.patch 2007-05-30 22:10:24 UTC (rev 2105)
@@ -1,14 +0,0 @@
-This patch adds the hex-printing of the file size read by 'ext2load'
-Index: u-boot.git/common/cmd_ext2.c
-===================================================================
---- u-boot.git.orig/common/cmd_ext2.c 2007-01-02 18:26:17.000000000 +0100
-+++ u-boot.git/common/cmd_ext2.c 2007-01-02 18:26:27.000000000 +0100
-@@ -279,7 +279,7 @@
- /* Loading ok, update default load address */
- load_addr = addr;
-
-- printf ("\n%ld bytes read\n", filelen);
-+ printf ("\n%ld (0x%lx) bytes read\n", filelen, filelen);
- sprintf(buf, "%lX", filelen);
- setenv("filesize", buf);
-
Deleted: trunk/oe/packages/uboot/files/u-boot-20061030-gta01bv2.patch
===================================================================
--- trunk/oe/packages/uboot/files/u-boot-20061030-gta01bv2.patch 2007-05-30 16:20:53 UTC (rev 2104)
+++ trunk/oe/packages/uboot/files/u-boot-20061030-gta01bv2.patch 2007-05-30 22:10:24 UTC (rev 2105)
@@ -1,246 +0,0 @@
-This patch adds support for the GTA01Bv2 variant of the FIC GTA01 (Neo1973) phone
-
-Index: git/Makefile
-===================================================================
---- git.orig/Makefile 2007-01-04 12:22:12.000000000 +0100
-+++ git/Makefile 2007-01-04 12:22:16.000000000 +0100
-@@ -1918,6 +1918,7 @@
-
- gta01_config \
- gta01v3_config \
-+gta01bv2_config \
- gta01v4_config : unconfig
- @board/gta01/split_by_variant.sh $@
-
-Index: git/board/gta01/gta01.c
-===================================================================
---- git.orig/board/gta01/gta01.c 2007-01-04 12:22:12.000000000 +0100
-+++ git/board/gta01/gta01.c 2007-01-04 12:22:16.000000000 +0100
-@@ -35,28 +35,29 @@
-
- DECLARE_GLOBAL_DATA_PTR;
-
--#if 1
-+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
- //#define M_MDIV 0xA1 /* Fout = 202.8MHz */
- //#define M_PDIV 0x3
- //#define M_SDIV 0x1
- #define M_MDIV 0x90 /* Fout = 202.8MHz */
- #define M_PDIV 0x7
- #define M_SDIV 0x0
--#else
--#define M_MDIV 0x5c /* Fout = 150.0MHz */
--#define M_PDIV 0x4
-+#elif defined(CONFIG_ARCH_GTA01B_v2)
-+#if 0
-+#define M_MDIV 0x7d /* Fout = 266MHz */
-+#define M_PDIV 0x1
-+#define M_SDIV 0x1
-+#endif
-+#define M_MDIV 0x90 /* Fout = 202.8MHz */
-+#define M_PDIV 0x7
- #define M_SDIV 0x0
-+#else
-+#error Please define GTA01 revision
- #endif
-
--#if 1
- #define U_M_MDIV 0x78
- #define U_M_PDIV 0x2
- #define U_M_SDIV 0x3
--#else
--#define U_M_MDIV 0x48
--#define U_M_PDIV 0x3
--#define U_M_SDIV 0x2
--#endif
-
- static inline void delay (unsigned long loops)
- {
-@@ -137,7 +138,31 @@
-
- gpio->GPHCON = 0x0000FAAA;
- gpio->GPHUP = 0x000007FF;
-+#elif defined(CONFIG_ARCH_GTA01B_v2)
-+ gpio->GPACON = 0x005E47FF;
-
-+ gpio->GPBCON = 0x00145416;
-+ gpio->GPBUP = 0x000007FF;
-+ gpio->GPBDAT |= 0x4; /* Set GBP2 to high (Flash power-up) */
-+
-+ gpio->GPCCON = 0xAAAA12A9;
-+ gpio->GPCUP = 0x0000FFFF;
-+
-+ gpio->GPDCON = 0xAAAAAAAA;
-+ gpio->GPDUP = 0x0000FFFF;
-+
-+ gpio->GPECON = 0xA02AAAAA;
-+ gpio->GPEUP = 0x0000FFFF;
-+
-+ gpio->GPFCON = 0x0000aa19;
-+ gpio->GPFUP = 0x000000FF;
-+ gpio->GPFDAT |= 0x4; /* Set GBF2 to high (nGSM_EN) */
-+
-+ gpio->GPGCON = 0xFF40F0C1;
-+ gpio->GPGUP = 0x0000AFEF;
-+
-+ gpio->GPHCON = 0x0000FAAA;
-+ gpio->GPHUP = 0x000007FF;
- #else
- #error Please define GTA01 version
- #endif
-@@ -156,9 +181,11 @@
-
- int board_late_init(void)
- {
-+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
- const char mmc_power = 0x8f;
-- /* enable D3REG 3.3V (SC/MMC power) */
-+ /* enable D2REG 3.3V (SC/MMC power) */
- i2c_write(0x08, 0x25, 1, &mmc_power, 1);
-+#endif
- return 0;
- }
-
-@@ -176,5 +203,7 @@
- return 0x00000130;
- #elif defined(CONFIG_ARCH_GTA01_v4)
- return 0x00000140;
-+#elif defined(CONFIG_ARCH_GTA01B_v2)
-+ return 0x00000220;
- #endif
- }
-Index: git/board/gta01/split_by_variant.sh
-===================================================================
---- git.orig/board/gta01/split_by_variant.sh 2007-01-04 12:22:12.000000000 +0100
-+++ git/board/gta01/split_by_variant.sh 2007-01-04 12:22:16.000000000 +0100
-@@ -15,16 +15,23 @@
- case "$1" in
- gta01v4_config)
- echo "#define CONFIG_ARCH_GTA01_v4" > ${obj}include/config.h
-+ echo "GTA01_BIG_FLASH=n" > ${obj}board/gta01/config.tmp
- ;;
-
- gta01v3_config)
- echo "#define CONFIG_ARCH_GTA01_v3" > ${obj}include/config.h
-+ echo "GTA01_BIG_FLASH=n" > ${obj}board/gta01/config.tmp
- ;;
-
-+ gta01bv2_config)
-+ echo "#define CONFIG_ARCH_GTA01B_v2" > ${obj}include/config.h
-+ echo "GTA01_BIG_FLASH=y" > ${obj}board/gta01/config.tmp
-+ ;;
-
- *)
- echo "$0:: Unrecognised config - using gta01v3_config"
- echo "#define CONFIG_ARCH_GTA01_v3" > ${obj}include/config.h
-+ echo "GTA01_BIG_FLASH=n" > ${obj}board/gta01/config.tmp
- ;;
-
- esac
-Index: git/include/configs/gta01.h
-===================================================================
---- git.orig/include/configs/gta01.h 2007-01-04 12:22:12.000000000 +0100
-+++ git/include/configs/gta01.h 2007-01-04 12:22:16.000000000 +0100
-@@ -128,6 +128,8 @@
- #define CFG_PROMPT "GTA01v3 # " /* Monitor Command Prompt */
- #elif defined(CONFIG_ARCH_GTA01_v4)
- #define CFG_PROMPT "GTA01v4 # " /* Monitor Command Prompt */
-+#elif defined(CONFIG_ARCH_GTA01B_v2)
-+#define CFG_PROMPT "GTA01Bv2 # " /* Monitor Command Prompt */
- #endif
- #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
- #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-@@ -166,7 +168,13 @@
- */
- #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
- #define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */
-+#if defined(CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
- #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-+#elif defined(CONFIG_ARCH_GTA01B_v2)
-+#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
-+#else
-+#error Please define GTA01 variant
-+#endif
- #define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */
-
- /*-----------------------------------------------------------------------
-Index: git/board/gta01/lowlevel_init.S
-===================================================================
---- git.orig/board/gta01/lowlevel_init.S 2007-01-04 12:22:07.000000000 +0100
-+++ git/board/gta01/lowlevel_init.S 2007-01-04 12:22:16.000000000 +0100
-@@ -108,12 +108,16 @@
- #define B5_PMC 0x0 /* normal */
-
- #define B6_MT 0x3 /* SDRAM */
--#define B6_Trcd 0x1
-+#define B6_Trcd 0x1 /* 3clk */
-+#if defined (CONFIG_ARCH_GTA01_v3) || defined(CONFIG_ARCH_GTA01_v4)
- #define B6_SCAN 0x1 /* 9bit */
-+#elif defined(CONFIG_ARCH_GTA01B_v2)
-+#define B6_SCAN 0x2 /* 10bit */
-+#endif
-
- #define B7_MT 0x3 /* SDRAM */
- #define B7_Trcd 0x1 /* 3clk */
--#define B7_SCAN 0x1 /* 9bit */
-+#define B7_SCAN 0x2 /* 10bit */
-
- /* REFRESH parameter */
- #define REFEN 0x1 /* Refresh enable */
-@@ -149,6 +153,19 @@
- orr r1, r1, #0xc0000000
- mcr p15, 0, r1, c1, c0, 0
-
-+#if defined(CONFIG_ARCH_GTA01_v4) || defined(CONFIG_ARCH_GTA01B_v2)
-+ /* switch on power for NAND */
-+ ldr r0, =0x56000010 /* GPBCON */
-+ ldr r1, [r0]
-+ orr r1, r1, #0x10
-+ str r1, [r0]
-+
-+ ldr r0, =0x56000014 /* GPBDAT */
-+ ldr r1, [r0]
-+ orr r1, r1, #(1 <<2)
-+ str r1, [r0]
-+#endif
-+
- /* everything is fine now */
- mov pc, lr
-
-Index: git/board/gta01/config.mk
-===================================================================
---- git.orig/board/gta01/config.mk 2007-01-04 12:22:07.000000000 +0100
-+++ git/board/gta01/config.mk 2007-01-04 12:22:16.000000000 +0100
-@@ -8,18 +8,26 @@
- # see http://www.samsung.com/ for more information on SAMSUNG
- #
-
-+# GTA01v3 has 1 bank of 64 MB SDRAM
-+# GTA01v4 has 1 bank of 64 MB SDRAM
- #
--# GTA01 has 1 bank of 64 MB DRAM
-+# 3000'0000 to 3400'0000
-+# we load ourself to 33F8'0000
-+#
-+# GTA01Bv2 or later has 1 bank of 128 MB SDRAM
- #
--# 3000'0000 to 3400'0000
-+# 3000'0000 to 3800'0000
-+# we load ourself to 37F8'0000
- #
- # Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
- # optionally with a ramdisk at 3080'0000
- #
--# we load ourself to 33F8'0000
--#
--# download area is 3300'0000
--#
-+# download area is 3200'0000 or 3300'0000
-
-+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-+ifeq ($(GTA01_BIG_RAM),y)
-+TEXT_BASE = 0x37F80000
-+else
- TEXT_BASE = 0x33F80000
-+endif
Deleted: trunk/oe/packages/uboot/files/u-boot-20061030-gta01v4.patch
===================================================================
--- trunk/oe/packages/uboot/files/u-boot-20061030-gta01v4.patch 2007-05-30 16:20:53 UTC (rev 2104)
+++ trunk/oe/packages/uboot/files/u-boot-20061030-gta01v4.patch 2007-05-30 22:10:24 UTC (rev 2105)
@@ -1,132 +0,0 @@
-Index: git/Makefile
-===================================================================
---- git.orig/Makefile 2007-01-04 12:22:08.000000000 +0100
-+++ git/Makefile 2007-01-04 12:22:12.000000000 +0100
-@@ -1916,8 +1916,10 @@
- qt2410_config : unconfig
- @./mkconfig $(@:_config=) arm arm920t qt2410 NULL s3c24x0
-
--gta01_config : unconfig
-- @./mkconfig $(@:_config=) arm arm920t gta01 NULL s3c24x0
-+gta01_config \
-+gta01v3_config \
-+gta01v4_config : unconfig
-+ @board/gta01/split_by_variant.sh $@
-
- scb9328_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
-Index: git/board/gta01/gta01.c
-===================================================================
---- git.orig/board/gta01/gta01.c 2007-01-04 12:22:08.000000000 +0100
-+++ git/board/gta01/gta01.c 2007-01-04 12:22:12.000000000 +0100
-@@ -90,6 +90,7 @@
- delay (8000);
-
- /* set up the I/O ports */
-+#if defined(CONFIG_ARCH_GTA01_v3)
- gpio->GPACON = 0x007FFFFF;
-
- gpio->GPBCON = 0x00005056;
-@@ -112,6 +113,34 @@
-
- gpio->GPHCON = 0x0008FAAA;
- gpio->GPHUP = 0x000007FF;
-+#elif defined(CONFIG_ARCH_GTA01_v4)
-+ gpio->GPACON = 0x007FFFFF; //0x005E47FF;
-+
-+ gpio->GPBDAT |= 0x4; /* Set GBP2 to high (Flash power-up) */
-+ gpio->GPBCON = 0x00005056; //0x00045016;
-+ gpio->GPBUP = 0x000007FF;
-+
-+ gpio->GPCCON = 0xAAAA12A9;
-+ gpio->GPCUP = 0x0000FFFF;
-+
-+ gpio->GPDCON = 0xAAAAAAAA;
-+ gpio->GPDUP = 0x0000FFFF;
-+
-+ gpio->GPECON = 0xA02AAAAA;
-+ gpio->GPEUP = 0x0000FFFF;
-+
-+ gpio->GPFCON = 0x0000aa09;
-+ gpio->GPFUP = 0x000000FF;
-+
-+ gpio->GPGCON = 0xFF40F0C1;
-+ gpio->GPGUP = 0x0000FFFF;
-+
-+ gpio->GPHCON = 0x0000FAAA;
-+ gpio->GPHUP = 0x000007FF;
-+
-+#else
-+#error Please define GTA01 version
-+#endif
-
- /* arch number of SMDK2410-Board */
- gd->bd->bi_arch_number = MACH_TYPE_GTA01;
-@@ -143,5 +172,9 @@
-
- u_int32_t get_board_rev(void)
- {
-+#if defined(CONFIG_ARCH_GTA01_v3)
- return 0x00000130;
-+#elif defined(CONFIG_ARCH_GTA01_v4)
-+ return 0x00000140;
-+#endif
- }
-Index: git/board/gta01/split_by_variant.sh
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ git/board/gta01/split_by_variant.sh 2007-01-04 12:22:12.000000000 +0100
-@@ -0,0 +1,36 @@
-+#!/bin/sh
-+# ---------------------------------------------------------
-+# Set the core module defines according to Core Module
-+# ---------------------------------------------------------
-+# ---------------------------------------------------------
-+# Set up the GTA01 type define
-+# ---------------------------------------------------------
-+
-+mkdir -p ${obj}include
-+if [ "$1" == "" ]
-+then
-+ echo "$0:: No parameters - using GTA01v3 config"
-+ echo "#define CONFIG_ARCH_GTA01_v3" > ${obj}include/config.h
-+else
-+ case "$1" in
-+ gta01v4_config)
-+ echo "#define CONFIG_ARCH_GTA01_v4" > ${obj}include/config.h
-+ ;;
-+
-+ gta01v3_config)
-+ echo "#define CONFIG_ARCH_GTA01_v3" > ${obj}include/config.h
-+ ;;
-+
-+
-+ *)
-+ echo "$0:: Unrecognised config - using gta01v3_config"
-+ echo "#define CONFIG_ARCH_GTA01_v3" > ${obj}include/config.h
-+ ;;
-+
-+ esac
-+
-+fi
-+# ---------------------------------------------------------
-+# Complete the configuration
-+# ---------------------------------------------------------
-+$MKCONFIG -a gta01 arm arm920t gta01 NULL s3c24x0
-Index: git/include/configs/gta01.h
-===================================================================
---- git.orig/include/configs/gta01.h 2007-01-04 12:22:08.000000000 +0100
-+++ git/include/configs/gta01.h 2007-01-04 12:22:12.000000000 +0100
-@@ -124,7 +124,11 @@
- * Miscellaneous configurable options
- */
- #define CFG_LONGHELP /* undef to save memory */
--#define CFG_PROMPT "GTA01 # " /* Monitor Command Prompt */
-+#if defined(CONFIG_ARCH_GTA01_v3)
-+#define CFG_PROMPT "GTA01v3 # " /* Monitor Command Prompt */
-+#elif defined(CONFIG_ARCH_GTA01_v4)
-+#define CFG_PROMPT "GTA01v4 # " /* Monitor Command Prompt */
-+#endif
- #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
- #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
- #define CFG_MAXARGS 16 /* max number of command args */
Deleted: trunk/oe/packages/uboot/files/u-boot-20061030-qt2410-gta01.patch
===================================================================
--- trunk/oe/packages/uboot/files/u-boot-20061030-qt2410-gta01.patch 2007-05-30 16:20:53 UTC (rev 2104)
+++ trunk/oe/packages/uboot/files/u-boot-20061030-qt2410-gta01.patch 2007-05-30 22:10:24 UTC (rev 2105)
@@ -1,9272 +0,0 @@
-Index: git/Makefile
-===================================================================
---- git.orig/Makefile 2007-01-04 12:21:15.000000000 +0100
-+++ git/Makefile 2007-01-04 12:21:18.000000000 +0100
-@@ -1913,6 +1913,12 @@
- sbc2410x_config: unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
-
-+qt2410_config : unconfig
-+ @./mkconfig $(@:_config=) arm arm920t qt2410 NULL s3c24x0
-+
-+gta01_config : unconfig
-+ @./mkconfig $(@:_config=) arm arm920t gta01 NULL s3c24x0
-+
- scb9328_config : unconfig
- @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
-
-Index: git/board/gta01/Makefile
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ git/board/gta01/Makefile 2007-01-04 12:21:18.000000000 +0100
-@@ -0,0 +1,47 @@
-+#
-+# (C) Copyright 2000, 2001, 2002
-+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB = lib$(BOARD).a
-+
-+OBJS := gta01.o
-+SOBJS := lowlevel_init.o
-+
-+$(LIB): $(OBJS) $(SOBJS)
-+ $(AR) crv $@ $(OBJS) $(SOBJS)
-+
-+clean:
-+ rm -f $(SOBJS) $(OBJS)
-+
-+distclean: clean
-+ rm -f $(LIB) core *.bak .depend
-+
-+#########################################################################
-+
-+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
-+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-+
-+-include .depend
-+
-+#########################################################################
-Index: git/board/gta01/config.mk
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ git/board/gta01/config.mk 2007-01-04 12:21:18.000000000 +0100
-@@ -0,0 +1,25 @@
-+#
-+# (C) Copyright 2002
-+# Gary Jennejohn, DENX Software Engineering, <gj at denx.de>
-+# David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
-+#
-+# FIC GTA01 board with S3C2410X (ARM920T) cpu
-+#
-+# see http://www.samsung.com/ for more information on SAMSUNG
-+#
-+
-+#
-+# GTA01 has 1 bank of 64 MB DRAM
-+#
-+# 3000'0000 to 3400'0000
-+#
-+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
-+# optionally with a ramdisk at 3080'0000
-+#
-+# we load ourself to 33F8'0000
-+#
-+# download area is 3300'0000
-+#
-+
-+
-+TEXT_BASE = 0x33F80000
-Index: git/board/gta01/gta01.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ git/board/gta01/gta01.c 2007-01-04 12:21:18.000000000 +0100
-@@ -0,0 +1,147 @@
-+/*
-+ * (C) 2006 by Harald Welte <hwelte at hmw-consulting.de>
-+ *
-+ * based on existing S3C2410 startup code in u-boot:
-+ *
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Marius Groeger <mgroeger at sysgo.de>
-+ *
-+ * (C) Copyright 2002
-+ * David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <s3c2410.h>
-+#include <i2c.h>
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+#if 1
-+//#define M_MDIV 0xA1 /* Fout = 202.8MHz */
-+//#define M_PDIV 0x3
-+//#define M_SDIV 0x1
-+#define M_MDIV 0x90 /* Fout = 202.8MHz */
-+#define M_PDIV 0x7
-+#define M_SDIV 0x0
-+#else
-+#define M_MDIV 0x5c /* Fout = 150.0MHz */
-+#define M_PDIV 0x4
-+#define M_SDIV 0x0
-+#endif
-+
-+#if 1
-+#define U_M_MDIV 0x78
-+#define U_M_PDIV 0x2
-+#define U_M_SDIV 0x3
-+#else
-+#define U_M_MDIV 0x48
-+#define U_M_PDIV 0x3
-+#define U_M_SDIV 0x2
-+#endif
-+
-+static inline void delay (unsigned long loops)
-+{
-+ __asm__ volatile ("1:\n"
-+ "subs %0, %1, #1\n"
-+ "bne 1b":"=r" (loops):"0" (loops));
-+}
-+
-+/*
-+ * Miscellaneous platform dependent initialisations
-+ */
-+
-+int board_init (void)
-+{
-+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+
-+ /* to reduce PLL lock time, adjust the LOCKTIME register */
-+ clk_power->LOCKTIME = 0xFFFFFF;
-+
-+ /* configure MPLL */
-+ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
-+
-+ /* some delay between MPLL and UPLL */
-+ delay (4000);
-+
-+ /* configure UPLL */
-+ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
-+
-+ /* some delay between MPLL and UPLL */
-+ delay (8000);
-+
-+ /* set up the I/O ports */
-+ gpio->GPACON = 0x007FFFFF;
-+
-+ gpio->GPBCON = 0x00005056;
-+ gpio->GPBUP = 0x000007FF;
-+
-+ gpio->GPCCON = 0xAAAA12A8;
-+ gpio->GPCUP = 0x0000FFFF;
-+
-+ gpio->GPDCON = 0xAAAAAAAA;
-+ gpio->GPDUP = 0x0000FFFF;
-+
-+ gpio->GPECON = 0xAAAAAAAA;
-+ gpio->GPEUP = 0x0000FFFF;
-+
-+ gpio->GPFCON = 0x00002AA9;
-+ gpio->GPFUP = 0x000000FF;
-+
-+ gpio->GPGCON = 0xA846F0C0;
-+ gpio->GPGUP = 0x0000AFEF;
-+
-+ gpio->GPHCON = 0x0008FAAA;
-+ gpio->GPHUP = 0x000007FF;
-+
-+ /* arch number of SMDK2410-Board */
-+ gd->bd->bi_arch_number = MACH_TYPE_GTA01;
-+
-+ /* adress of boot parameters */
-+ gd->bd->bi_boot_params = 0x30000100;
-+
-+ icache_enable();
-+ dcache_enable();
-+
-+ return 0;
-+}
-+
-+int board_late_init(void)
-+{
-+ const char mmc_power = 0x8f;
-+ /* enable D3REG 3.3V (SC/MMC power) */
-+ i2c_write(0x08, 0x25, 1, &mmc_power, 1);
-+ return 0;
-+}
-+
-+int dram_init (void)
-+{
-+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-+
-+ return 0;
-+}
-+
-+u_int32_t get_board_rev(void)
-+{
-+ return 0x00000130;
-+}
-Index: git/board/gta01/lowlevel_init.S
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ git/board/gta01/lowlevel_init.S 2007-01-04 12:21:18.000000000 +0100
-@@ -0,0 +1,171 @@
-+/*
-+ * Memory Setup stuff - taken from blob memsetup.S
-+ *
-+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
-+ * Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
-+ *
-+ * Modified for the FIC GTA01 by Harald Welte <hwelte at hmw-consulting.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+
-+#include <config.h>
-+#include <version.h>
-+
-+
-+/* some parameters for the board */
-+
-+/*
-+ *
-+ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S
-+ *
-+ * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar at sec.samsung.com>
-+ *
-+ */
-+
-+#define BWSCON 0x48000000
-+
-+/* BWSCON */
-+#define DW8 (0x0)
-+#define DW16 (0x1)
-+#define DW32 (0x2)
-+#define WAIT (0x1<<2)
-+#define UBLB (0x1<<3)
-+
-+#define B1_BWSCON (DW32)
-+#define B2_BWSCON (DW16)
-+#define B3_BWSCON (DW16 + WAIT + UBLB)
-+#define B4_BWSCON (DW16)
-+#define B5_BWSCON (DW16)
-+#define B6_BWSCON (DW32)
-+#define B7_BWSCON (DW32)
-+
-+/* BANK0CON */
-+#define B0_Tacs 0x0 /* 0clk */
-+#define B0_Tcos 0x0 /* 0clk */
-+#define B0_Tacc 0x7 /* 14clk */
-+#define B0_Tcoh 0x0 /* 0clk */
-+#define B0_Tah 0x0 /* 0clk */
-+#define B0_Tacp 0x0
-+#define B0_PMC 0x0 /* normal */
-+
-+/* BANK1CON */
-+#define B1_Tacs 0x0 /* 0clk */
-+#define B1_Tcos 0x0 /* 0clk */
-+#define B1_Tacc 0x7 /* 14clk */
-+#define B1_Tcoh 0x0 /* 0clk */
-+#define B1_Tah 0x0 /* 0clk */
-+#define B1_Tacp 0x0
-+#define B1_PMC 0x0
-+
-+#define B2_Tacs 0x0
-+#define B2_Tcos 0x0
-+#define B2_Tacc 0x7
-+#define B2_Tcoh 0x0
-+#define B2_Tah 0x0
-+#define B2_Tacp 0x0
-+#define B2_PMC 0x0
-+
-+#define B3_Tacs 0x0 /* 0clk */
-+#define B3_Tcos 0x3 /* 4clk */
-+#define B3_Tacc 0x7 /* 14clk */
-+#define B3_Tcoh 0x1 /* 1clk */
-+#define B3_Tah 0x0 /* 0clk */
-+#define B3_Tacp 0x3 /* 6clk */
-+#define B3_PMC 0x0 /* normal */
-+
-+#define B4_Tacs 0x0 /* 0clk */
-+#define B4_Tcos 0x0 /* 0clk */
-+#define B4_Tacc 0x7 /* 14clk */
-+#define B4_Tcoh 0x0 /* 0clk */
-+#define B4_Tah 0x0 /* 0clk */
-+#define B4_Tacp 0x0
-+#define B4_PMC 0x0 /* normal */
-+
-+#define B5_Tacs 0x0 /* 0clk */
-+#define B5_Tcos 0x0 /* 0clk */
-+#define B5_Tacc 0x7 /* 14clk */
-+#define B5_Tcoh 0x0 /* 0clk */
-+#define B5_Tah 0x0 /* 0clk */
-+#define B5_Tacp 0x0
-+#define B5_PMC 0x0 /* normal */
-+
-+#define B6_MT 0x3 /* SDRAM */
-+#define B6_Trcd 0x1
-+#define B6_SCAN 0x1 /* 9bit */
-+
-+#define B7_MT 0x3 /* SDRAM */
-+#define B7_Trcd 0x1 /* 3clk */
-+#define B7_SCAN 0x1 /* 9bit */
-+
-+/* REFRESH parameter */
-+#define REFEN 0x1 /* Refresh enable */
-+#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */
-+#define Trp 0x1 /* 3clk */
-+#define Trc 0x3 /* 7clk */
-+#define Tchr 0x2 /* 3clk */
-+//#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */
-+#define REFCNT 997 /* period=17.5us, HCLK=60Mhz, (2048+1-15.6*60) */
-+/**************************************/
-+
-+_TEXT_BASE:
-+ .word TEXT_BASE
-+
-+.globl lowlevel_init
-+lowlevel_init:
-+ /* memory control configuration */
-+ /* make r0 relative the current location so that it */
-+ /* reads SMRDATA out of FLASH rather than memory ! */
-+ ldr r0, =SMRDATA
-+ ldr r1, _TEXT_BASE
-+ sub r0, r0, r1
-+ ldr r1, =BWSCON /* Bus Width Status Controller */
-+ add r2, r0, #13*4
-+0:
-+ ldr r3, [r0], #4
-+ str r3, [r1], #4
-+ cmp r2, r0
-+ bne 0b
-+
-+ /* setup asynchronous bus mode */
-+ mrc p15, 0, r1 ,c1 ,c0, 0
-+ orr r1, r1, #0xc0000000
-+ mcr p15, 0, r1, c1, c0, 0
-+
-+ /* everything is fine now */
-+ mov pc, lr
-+
-+ .ltorg
-+/* the literal pools origin */
-+
-+SMRDATA:
-+ .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28))
-+ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))
-+ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))
-+ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))
-+ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))
-+ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))
-+ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))
-+ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
-+ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
-+ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
-+ .word 0xb2
-+ .word 0x30
-+ .word 0x30
-Index: git/board/gta01/u-boot.lds
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ git/board/gta01/u-boot.lds 2007-01-04 12:21:18.000000000 +0100
-@@ -0,0 +1,57 @@
-+/*
-+ * (C) Copyright 2002
-+ * Gary Jennejohn, DENX Software Engineering, <gj at denx.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
-+OUTPUT_ARCH(arm)
-+ENTRY(_start)
-+SECTIONS
-+{
-+ . = 0x00000000;
-+
-+ . = ALIGN(4);
-+ .text :
-+ {
-+ cpu/arm920t/start.o (.text)
-+ *(.text)
-+ }
-+
-+ . = ALIGN(4);
-+ .rodata : { *(.rodata) }
-+
-+ . = ALIGN(4);
-+ .data : { *(.data) }
-+
-+ . = ALIGN(4);
-+ .got : { *(.got) }
-+
-+ . = .;
-+ __u_boot_cmd_start = .;
-+ .u_boot_cmd : { *(.u_boot_cmd) }
-+ __u_boot_cmd_end = .;
-+
-+ . = ALIGN(4);
-+ __bss_start = .;
-+ .bss : { *(.bss) }
-+ _end = .;
-+}
-Index: git/board/qt2410/Makefile
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ git/board/qt2410/Makefile 2007-01-04 12:21:18.000000000 +0100
-@@ -0,0 +1,47 @@
-+#
-+# (C) Copyright 2000, 2001, 2002
-+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-+#
-+# See file CREDITS for list of people who contributed to this
-+# project.
-+#
-+# This program is free software; you can redistribute it and/or
-+# modify it under the terms of the GNU General Public License as
-+# published by the Free Software Foundation; either version 2 of
-+# the License, or (at your option) any later version.
-+#
-+# This program is distributed in the hope that it will be useful,
-+# but WITHOUT ANY WARRANTY; without even the implied warranty of
-+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+# GNU General Public License for more details.
-+#
-+# You should have received a copy of the GNU General Public License
-+# along with this program; if not, write to the Free Software
-+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+# MA 02111-1307 USA
-+#
-+
-+include $(TOPDIR)/config.mk
-+
-+LIB = lib$(BOARD).a
-+
-+OBJS := qt2410.o flash.o
-+SOBJS := lowlevel_init.o
-+
-+$(LIB): $(OBJS) $(SOBJS)
-+ $(AR) crv $@ $(OBJS) $(SOBJS)
-+
-+clean:
-+ rm -f $(SOBJS) $(OBJS)
-+
-+distclean: clean
-+ rm -f $(LIB) core *.bak .depend
-+
-+#########################################################################
-+
-+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
-+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-+
-+-include .depend
-+
-+#########################################################################
-Index: git/board/qt2410/config.mk
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ git/board/qt2410/config.mk 2007-01-04 12:21:18.000000000 +0100
-@@ -0,0 +1,25 @@
-+#
-+# (C) Copyright 2002
-+# Gary Jennejohn, DENX Software Engineering, <gj at denx.de>
-+# David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
-+#
-+# SAMSUNG SMDK2410 board with S3C2410X (ARM920T) cpu
-+#
-+# see http://www.samsung.com/ for more information on SAMSUNG
-+#
-+
-+#
-+# SMDK2410 has 1 bank of 64 MB DRAM
-+#
-+# 3000'0000 to 3400'0000
-+#
-+# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
-+# optionally with a ramdisk at 3080'0000
-+#
-+# we load ourself to 33F8'0000
-+#
-+# download area is 3300'0000
-+#
-+
-+
-+TEXT_BASE = 0x33F80000
-Index: git/board/qt2410/flash.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ git/board/qt2410/flash.c 2007-01-04 12:21:18.000000000 +0100
-@@ -0,0 +1,435 @@
-+/*
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Alex Zuepke <azu at sysgo.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+
-+ulong myflush (void);
-+
-+
-+#define FLASH_BANK_SIZE PHYS_FLASH_SIZE
-+#define MAIN_SECT_SIZE 0x10000 /* 64 KB */
-+
-+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
-+
-+
-+#define CMD_READ_ARRAY 0x000000F0
-+#define CMD_UNLOCK1 0x000000AA
-+#define CMD_UNLOCK2 0x00000055
-+#define CMD_ERASE_SETUP 0x00000080
-+#define CMD_ERASE_CONFIRM 0x00000030
-+#define CMD_PROGRAM 0x000000A0
-+#define CMD_UNLOCK_BYPASS 0x00000020
-+
-+#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00000555 << 1)))
-+#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x000002AA << 1)))
-+
-+#define BIT_ERASE_DONE 0x00000080
-+#define BIT_RDY_MASK 0x00000080
-+#define BIT_PROGRAM_ERROR 0x00000020
-+#define BIT_TIMEOUT 0x80000000 /* our flag */
-+
-+#define READY 1
-+#define ERR 2
-+#define TMO 4
-+
-+/*-----------------------------------------------------------------------
-+ */
-+
-+ulong flash_init (void)
-+{
-+ int i, j;
-+ ulong size = 0;
-+
-+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
-+ ulong flashbase = 0;
-+
-+ flash_info[i].flash_id =
-+#if defined(CONFIG_AMD_LV400)
-+ (AMD_MANUFACT & FLASH_VENDMASK) |
-+ (AMD_ID_LV400B & FLASH_TYPEMASK);
-+#elif defined(CONFIG_AMD_LV800)
-+ (AMD_MANUFACT & FLASH_VENDMASK) |
-+ (AMD_ID_LV800B & FLASH_TYPEMASK);
-+#else
-+#error "Unknown flash configured"
-+#endif
-+ flash_info[i].size = FLASH_BANK_SIZE;
-+ flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-+ memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
-+ if (i == 0)
-+ flashbase = PHYS_FLASH_1;
-+ else
-+ panic ("configured too many flash banks!\n");
-+ for (j = 0; j < flash_info[i].sector_count; j++) {
-+ if (j <= 3) {
-+ /* 1st one is 16 KB */
-+ if (j == 0) {
-+ flash_info[i].start[j] =
-+ flashbase + 0;
-+ }
-+
-+ /* 2nd and 3rd are both 8 KB */
-+ if ((j == 1) || (j == 2)) {
-+ flash_info[i].start[j] =
-+ flashbase + 0x4000 + (j -
-+ 1) *
-+ 0x2000;
-+ }
-+
-+ /* 4th 32 KB */
-+ if (j == 3) {
-+ flash_info[i].start[j] =
-+ flashbase + 0x8000;
-+ }
-+ } else {
-+ flash_info[i].start[j] =
-+ flashbase + (j - 3) * MAIN_SECT_SIZE;
-+ }
-+ }
-+ size += flash_info[i].size;
-+ }
-+
-+ flash_protect (FLAG_PROTECT_SET,
-+ CFG_FLASH_BASE,
-+ CFG_FLASH_BASE + monitor_flash_len - 1,
-+ &flash_info[0]);
-+
-+#if 0
-+ flash_protect (FLAG_PROTECT_SET,
-+ CFG_ENV_ADDR,
-+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
-+#endif
-+
-+ return size;
-+}
-+
-+/*-----------------------------------------------------------------------
-+ */
-+void flash_print_info (flash_info_t * info)
-+{
-+ int i;
-+
-+ switch (info->flash_id & FLASH_VENDMASK) {
-+ case (AMD_MANUFACT & FLASH_VENDMASK):
-+ printf ("AMD: ");
-+ break;
-+ default:
-+ printf ("Unknown Vendor ");
-+ break;
-+ }
-+
-+ switch (info->flash_id & FLASH_TYPEMASK) {
-+ case (AMD_ID_LV400B & FLASH_TYPEMASK):
-+ printf ("1x Amd29LV400BB (4Mbit)\n");
-+ break;
-+ case (AMD_ID_LV800B & FLASH_TYPEMASK):
-+ printf ("1x Amd29LV800BB (8Mbit)\n");
-+ break;
-+ default:
-+ printf ("Unknown Chip Type\n");
-+ goto Done;
-+ break;
-+ }
-+
-+ printf (" Size: %ld MB in %d Sectors\n",
-+ info->size >> 20, info->sector_count);
-+
-+ printf (" Sector Start Addresses:");
-+ for (i = 0; i < info->sector_count; i++) {
-+ if ((i % 5) == 0) {
-+ printf ("\n ");
-+ }
-+ printf (" %08lX%s", info->start[i],
-+ info->protect[i] ? " (RO)" : " ");
-+ }
-+ printf ("\n");
-+
-+ Done:;
-+}
-+
-+/*-----------------------------------------------------------------------
-+ */
-+
-+int flash_erase (flash_info_t * info, int s_first, int s_last)
-+{
-+ ushort result;
-+ int iflag, cflag, prot, sect;
-+ int rc = ERR_OK;
-+ int chip;
-+
-+ /* first look for protection bits */
-+
-+ if (info->flash_id == FLASH_UNKNOWN)
-+ return ERR_UNKNOWN_FLASH_TYPE;
-+
-+ if ((s_first < 0) || (s_first > s_last)) {
-+ return ERR_INVAL;
-+ }
-+
-+ if ((info->flash_id & FLASH_VENDMASK) !=
-+ (AMD_MANUFACT & FLASH_VENDMASK)) {
-+ return ERR_UNKNOWN_FLASH_VENDOR;
-+ }
-+
-+ prot = 0;
-+ for (sect = s_first; sect <= s_last; ++sect) {
-+ if (info->protect[sect]) {
-+ prot++;
-+ }
-+ }
-+ if (prot)
-+ return ERR_PROTECTED;
-+
-+ /*
-+ * Disable interrupts which might cause a timeout
-+ * here. Remember that our exception vectors are
-+ * at address 0 in the flash, and we don't want a
-+ * (ticker) exception to happen while the flash
-+ * chip is in programming mode.
-+ */
-+ cflag = icache_status ();
-+ icache_disable ();
-+ iflag = disable_interrupts ();
-+
-+ /* Start erase on unprotected sectors */
-+ for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
-+ printf ("Erasing sector %2d ... ", sect);
-+
-+ /* arm simple, non interrupt dependent timer */
-+ reset_timer_masked ();
-+
-+ if (info->protect[sect] == 0) { /* not protected */
-+ vu_short *addr = (vu_short *) (info->start[sect]);
-+
-+ MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-+ MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-+ MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-+
-+ MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-+ MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-+ *addr = CMD_ERASE_CONFIRM;
-+
-+ /* wait until flash is ready */
-+ chip = 0;
-+
-+ do {
-+ result = *addr;
-+
-+ /* check timeout */
-+ if (get_timer_masked () >
-+ CFG_FLASH_ERASE_TOUT) {
-+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-+ chip = TMO;
-+ break;
-+ }
-+
-+ if (!chip
-+ && (result & 0xFFFF) & BIT_ERASE_DONE)
-+ chip = READY;
-+
-+ if (!chip
-+ && (result & 0xFFFF) & BIT_PROGRAM_ERROR)
-+ chip = ERR;
-+
-+ } while (!chip);
-+
-+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-+
-+ if (chip == ERR) {
-+ rc = ERR_PROG_ERROR;
-+ goto outahere;
-+ }
-+ if (chip == TMO) {
-+ rc = ERR_TIMOUT;
-+ goto outahere;
-+ }
-+
-+ printf ("ok.\n");
-+ } else { /* it was protected */
-+
-+ printf ("protected!\n");
-+ }
-+ }
-+
-+ if (ctrlc ())
-+ printf ("User Interrupt!\n");
-+
-+ outahere:
-+ /* allow flash to settle - wait 10 ms */
-+ udelay_masked (10000);
-+
-+ if (iflag)
-+ enable_interrupts ();
-+
-+ if (cflag)
-+ icache_enable ();
-+
-+ return rc;
-+}
-+
-+/*-----------------------------------------------------------------------
-+ * Copy memory to flash
-+ */
-+
-+volatile static int write_hword (flash_info_t * info, ulong dest, ushort data)
-+{
-+ vu_short *addr = (vu_short *) dest;
-+ ushort result;
-+ int rc = ERR_OK;
-+ int cflag, iflag;
-+ int chip;
-+
-+ /*
-+ * Check if Flash is (sufficiently) erased
-+ */
-+ result = *addr;
-+ if ((result & data) != data)
-+ return ERR_NOT_ERASED;
-+
-+
-+ /*
-+ * Disable interrupts which might cause a timeout
-+ * here. Remember that our exception vectors are
-+ * at address 0 in the flash, and we don't want a
-+ * (ticker) exception to happen while the flash
-+ * chip is in programming mode.
-+ */
-+ cflag = icache_status ();
-+ icache_disable ();
-+ iflag = disable_interrupts ();
-+
-+ MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-+ MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-+ MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS;
-+ *addr = CMD_PROGRAM;
-+ *addr = data;
-+
-+ /* arm simple, non interrupt dependent timer */
-+ reset_timer_masked ();
-+
-+ /* wait until flash is ready */
-+ chip = 0;
-+ do {
-+ result = *addr;
-+
-+ /* check timeout */
-+ if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
-+ chip = ERR | TMO;
-+ break;
-+ }
-+ if (!chip && ((result & 0x80) == (data & 0x80)))
-+ chip = READY;
-+
-+ if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) {
-+ result = *addr;
-+
-+ if ((result & 0x80) == (data & 0x80))
-+ chip = READY;
-+ else
-+ chip = ERR;
-+ }
-+
-+ } while (!chip);
-+
-+ *addr = CMD_READ_ARRAY;
-+
-+ if (chip == ERR || *addr != data)
-+ rc = ERR_PROG_ERROR;
-+
-+ if (iflag)
-+ enable_interrupts ();
-+
-+ if (cflag)
-+ icache_enable ();
-+
-+ return rc;
-+}
-+
-+/*-----------------------------------------------------------------------
-+ * Copy memory to flash.
-+ */
-+
-+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-+{
-+ ulong cp, wp;
-+ int l;
-+ int i, rc;
-+ ushort data;
-+
-+ wp = (addr & ~1); /* get lower word aligned address */
-+
-+ /*
-+ * handle unaligned start bytes
-+ */
-+ if ((l = addr - wp) != 0) {
-+ data = 0;
-+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
-+ data = (data >> 8) | (*(uchar *) cp << 8);
-+ }
-+ for (; i < 2 && cnt > 0; ++i) {
-+ data = (data >> 8) | (*src++ << 8);
-+ --cnt;
-+ ++cp;
-+ }
-+ for (; cnt == 0 && i < 2; ++i, ++cp) {
-+ data = (data >> 8) | (*(uchar *) cp << 8);
-+ }
-+
-+ if ((rc = write_hword (info, wp, data)) != 0) {
-+ return (rc);
-+ }
-+ wp += 2;
-+ }
-+
-+ /*
-+ * handle word aligned part
-+ */
-+ while (cnt >= 2) {
-+ data = *((vu_short *) src);
-+ if ((rc = write_hword (info, wp, data)) != 0) {
-+ return (rc);
-+ }
-+ src += 2;
-+ wp += 2;
-+ cnt -= 2;
-+ }
-+
-+ if (cnt == 0) {
-+ return ERR_OK;
-+ }
-+
-+ /*
-+ * handle unaligned tail bytes
-+ */
-+ data = 0;
-+ for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
-+ data = (data >> 8) | (*src++ << 8);
-+ --cnt;
-+ }
-+ for (; i < 2; ++i, ++cp) {
-+ data = (data >> 8) | (*(uchar *) cp << 8);
-+ }
-+
-+ return write_hword (info, wp, data);
-+}
-Index: git/board/qt2410/lowlevel_init.S
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ git/board/qt2410/lowlevel_init.S 2007-01-04 12:21:18.000000000 +0100
-@@ -0,0 +1,173 @@
-+/*
-+ * Memory Setup stuff - taken from blob memsetup.S
-+ *
-+ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
-+ * Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
-+ *
-+ * Modified for the Samsung SMDK2410 by
-+ * (C) Copyright 2002
-+ * David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+
-+#include <config.h>
-+#include <version.h>
-+
-+
-+/* some parameters for the board */
-+
-+/*
-+ *
-+ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S
-+ *
-+ * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar at sec.samsung.com>
-+ *
-+ */
-+
-+#define BWSCON 0x48000000
-+
-+/* BWSCON */
-+#define DW8 (0x0)
-+#define DW16 (0x1)
-+#define DW32 (0x2)
-+#define WAIT (0x1<<2)
-+#define UBLB (0x1<<3)
-+
-+#define B1_BWSCON (DW32)
-+#define B2_BWSCON (DW16)
-+#define B3_BWSCON (DW16 + WAIT + UBLB)
-+#define B4_BWSCON (DW16)
-+#define B5_BWSCON (DW16)
-+#define B6_BWSCON (DW32)
-+#define B7_BWSCON (DW32)
-+
-+/* BANK0CON */
-+#define B0_Tacs 0x0 /* 0clk */
-+#define B0_Tcos 0x0 /* 0clk */
-+#define B0_Tacc 0x7 /* 14clk */
-+#define B0_Tcoh 0x0 /* 0clk */
-+#define B0_Tah 0x0 /* 0clk */
-+#define B0_Tacp 0x0
-+#define B0_PMC 0x0 /* normal */
-+
-+/* BANK1CON */
-+#define B1_Tacs 0x0 /* 0clk */
-+#define B1_Tcos 0x0 /* 0clk */
-+#define B1_Tacc 0x7 /* 14clk */
-+#define B1_Tcoh 0x0 /* 0clk */
-+#define B1_Tah 0x0 /* 0clk */
-+#define B1_Tacp 0x0
-+#define B1_PMC 0x0
-+
-+#define B2_Tacs 0x0
-+#define B2_Tcos 0x0
-+#define B2_Tacc 0x7
-+#define B2_Tcoh 0x0
-+#define B2_Tah 0x0
-+#define B2_Tacp 0x0
-+#define B2_PMC 0x0
-+
-+#define B3_Tacs 0x0 /* 0clk */
-+#define B3_Tcos 0x3 /* 4clk */
-+#define B3_Tacc 0x7 /* 14clk */
-+#define B3_Tcoh 0x1 /* 1clk */
-+#define B3_Tah 0x0 /* 0clk */
-+#define B3_Tacp 0x3 /* 6clk */
-+#define B3_PMC 0x0 /* normal */
-+
-+#define B4_Tacs 0x0 /* 0clk */
-+#define B4_Tcos 0x0 /* 0clk */
-+#define B4_Tacc 0x7 /* 14clk */
-+#define B4_Tcoh 0x0 /* 0clk */
-+#define B4_Tah 0x0 /* 0clk */
-+#define B4_Tacp 0x0
-+#define B4_PMC 0x0 /* normal */
-+
-+#define B5_Tacs 0x0 /* 0clk */
-+#define B5_Tcos 0x0 /* 0clk */
-+#define B5_Tacc 0x7 /* 14clk */
-+#define B5_Tcoh 0x0 /* 0clk */
-+#define B5_Tah 0x0 /* 0clk */
-+#define B5_Tacp 0x0
-+#define B5_PMC 0x0 /* normal */
-+
-+#define B6_MT 0x3 /* SDRAM */
-+#define B6_Trcd 0x1
-+#define B6_SCAN 0x1 /* 9bit */
-+
-+#define B7_MT 0x3 /* SDRAM */
-+#define B7_Trcd 0x1 /* 3clk */
-+#define B7_SCAN 0x1 /* 9bit */
-+
-+/* REFRESH parameter */
-+#define REFEN 0x1 /* Refresh enable */
-+#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */
-+#define Trp 0x1 /* 3clk */
-+#define Trc 0x3 /* 7clk */
-+#define Tchr 0x2 /* 3clk */
-+//#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */
-+#define REFCNT 997 /* period=17.5us, HCLK=60Mhz, (2048+1-15.6*60) */
-+/**************************************/
-+
-+_TEXT_BASE:
-+ .word TEXT_BASE
-+
-+.globl lowlevel_init
-+lowlevel_init:
-+ /* memory control configuration */
-+ /* make r0 relative the current location so that it */
-+ /* reads SMRDATA out of FLASH rather than memory ! */
-+ ldr r0, =SMRDATA
-+ ldr r1, _TEXT_BASE
-+ sub r0, r0, r1
-+ ldr r1, =BWSCON /* Bus Width Status Controller */
-+ add r2, r0, #13*4
-+0:
-+ ldr r3, [r0], #4
-+ str r3, [r1], #4
-+ cmp r2, r0
-+ bne 0b
-+
-+ /* setup asynchronous bus mode */
-+ mrc p15, 0, r1 ,c1 ,c0, 0
-+ orr r1, r1, #0xc0000000
-+ mcr p15, 0, r1, c1, c0, 0
-+
-+ /* everything is fine now */
-+ mov pc, lr
-+
-+ .ltorg
-+/* the literal pools origin */
-+
-+SMRDATA:
-+ .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28))
-+ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))
-+ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))
-+ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))
-+ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))
-+ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))
-+ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))
-+ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
-+ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
-+ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
-+ .word 0xb2
-+ .word 0x30
-+ .word 0x30
-Index: git/board/qt2410/qt2410.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ git/board/qt2410/qt2410.c 2007-01-04 12:21:18.000000000 +0100
-@@ -0,0 +1,127 @@
-+/*
-+ * (C) 2006 by Harald Welte <hwelte at hmw-consulting.de>
-+ *
-+ * based on existing S3C2410 startup code in u-boot:
-+ *
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Marius Groeger <mgroeger at sysgo.de>
-+ *
-+ * (C) Copyright 2002
-+ * David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+#include <s3c2410.h>
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+#if 1
-+//#define M_MDIV 0xA1 /* Fout = 202.8MHz */
-+//#define M_PDIV 0x3
-+//#define M_SDIV 0x1
-+#define M_MDIV 0x90 /* Fout = 202.8MHz */
-+#define M_PDIV 0x7
-+#define M_SDIV 0x0
-+#else
-+#define M_MDIV 0x5c /* Fout = 150.0MHz */
-+#define M_PDIV 0x4
-+#define M_SDIV 0x0
-+#endif
-+
-+#if 1
-+#define U_M_MDIV 0x78
-+#define U_M_PDIV 0x2
-+#define U_M_SDIV 0x3
-+#else
-+#define U_M_MDIV 0x48
-+#define U_M_PDIV 0x3
-+#define U_M_SDIV 0x2
-+#endif
-+
-+static inline void delay (unsigned long loops)
-+{
-+ __asm__ volatile ("1:\n"
-+ "subs %0, %1, #1\n"
-+ "bne 1b":"=r" (loops):"0" (loops));
-+}
-+
-+/*
-+ * Miscellaneous platform dependent initialisations
-+ */
-+
-+int board_init (void)
-+{
-+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
-+
-+ /* to reduce PLL lock time, adjust the LOCKTIME register */
-+ clk_power->LOCKTIME = 0xFFFFFF;
-+
-+ /* configure MPLL */
-+ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
-+
-+ /* some delay between MPLL and UPLL */
-+ delay (4000);
-+
-+ /* configure UPLL */
-+ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
-+
-+ /* some delay between MPLL and UPLL */
-+ delay (8000);
-+
-+ /* set up the I/O ports */
-+ gpio->GPACON = 0x007FFFFF;
-+ gpio->GPBCON = 0x00044555;
-+ gpio->GPBUP = 0x000007FF;
-+ gpio->GPCCON = 0xAAAAAAAA;
-+ gpio->GPCUP = 0x0000FFFF;
-+ gpio->GPDCON = 0xAAAAAAAA;
-+ gpio->GPDUP = 0x0000FFFF;
-+ gpio->GPECON = 0xAAAAAAAA;
-+ gpio->GPEUP = 0x0000FFFF;
-+ gpio->GPFCON = 0x000055AA;
-+ gpio->GPFUP = 0x000000FF;
-+ gpio->GPGCON = 0xFF95FFBA;
-+ //gpio->GPGUP = 0x0000FFFF;
-+ gpio->GPGUP = 0x0000AFEF;
-+ gpio->GPHCON = 0x0028FAAA;
-+ gpio->GPHUP = 0x000007FF;
-+
-+ /* arch number of SMDK2410-Board */
-+ gd->bd->bi_arch_number = MACH_TYPE_QT2410;
-+
-+ /* adress of boot parameters */
-+ gd->bd->bi_boot_params = 0x30000100;
-+
-+ icache_enable();
-+ dcache_enable();
-+
-+ return 0;
-+}
-+
-+int dram_init (void)
-+{
-+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-+
-+ return 0;
-+}
-Index: git/board/qt2410/u-boot.lds
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ git/board/qt2410/u-boot.lds 2007-01-04 12:21:18.000000000 +0100
-@@ -0,0 +1,57 @@
-+/*
-+ * (C) Copyright 2002
-+ * Gary Jennejohn, DENX Software Engineering, <gj at denx.de>
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
-+OUTPUT_ARCH(arm)
-+ENTRY(_start)
-+SECTIONS
-+{
-+ . = 0x00000000;
-+
-+ . = ALIGN(4);
-+ .text :
-+ {
-+ cpu/arm920t/start.o (.text)
-+ *(.text)
-+ }
-+
-+ . = ALIGN(4);
-+ .rodata : { *(.rodata) }
-+
-+ . = ALIGN(4);
-+ .data : { *(.data) }
-+
-+ . = ALIGN(4);
-+ .got : { *(.got) }
-+
-+ . = .;
-+ __u_boot_cmd_start = .;
-+ .u_boot_cmd : { *(.u_boot_cmd) }
-+ __u_boot_cmd_end = .;
-+
-+ . = ALIGN(4);
-+ __bss_start = .;
-+ .bss : { *(.bss) }
-+ _end = .;
-+}
-Index: git/common/Makefile
-===================================================================
---- git.orig/common/Makefile 2007-01-04 12:21:15.000000000 +0100
-+++ git/common/Makefile 2007-01-04 12:21:18.000000000 +0100
-@@ -28,7 +28,7 @@
- AOBJS =
-
- COBJS = main.o ACEX1K.o altera.o bedbug.o circbuf.o \
-- cmd_ace.o cmd_autoscript.o \
-+ cmd_ace.o cmd_arm920.o cmd_autoscript.o \
- cmd_bdinfo.o cmd_bedbug.o cmd_bmp.o cmd_boot.o cmd_bootm.o \
- cmd_cache.o cmd_console.o \
- cmd_date.o cmd_dcr.o cmd_diag.o cmd_display.o cmd_doc.o cmd_dtt.o \
-Index: git/common/cmd_arm920.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ git/common/cmd_arm920.c 2007-01-04 12:21:18.000000000 +0100
-@@ -0,0 +1,64 @@
-+/*
-+ * (C) Copyright 2003
-+ * Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+/*
-+ * Boot support
-+ */
-+#include <common.h>
-+#include <command.h>
-+#include <net.h> /* for print_IPaddr */
-+
-+DECLARE_GLOBAL_DATA_PTR;
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_BDI)
-+
-+extern unsigned long read_p15_c1(void);
-+extern void write_p15_c1(unsigned long);
-+
-+int do_arm920 ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-+{
-+ int i;
-+
-+ if (strcmp(argv[1], "cp15c1")) {
-+ printf("Usage:\n%s\n", cmdtp->usage);
-+ return 1;
-+ }
-+
-+ if (!strcmp(argv[2], "write")) {
-+ ulong val = simple_strtoul(argv[3], NULL, 16);
-+ printf("setting cp15c1 to 0x%08x\n", val);
-+ write_p15_c1(val);
-+ } else if (!strcmp(argv[2], "read"))
-+ printf("cp15c1 = 0x%08x\n", read_p15_c1());
-+
-+ return 0;
-+}
-+
-+/* -------------------------------------------------------------------- */
-+
-+U_BOOT_CMD(
-+ arm920, 4, 1, do_arm920,
-+ "arm920_cp15 - print cp15",
-+ NULL
-+);
-+#endif /* CFG_CMD_BDI */
-Index: git/cpu/arm920t/cpu.c
-===================================================================
---- git.orig/cpu/arm920t/cpu.c 2007-01-04 12:21:15.000000000 +0100
-+++ git/cpu/arm920t/cpu.c 2007-01-04 12:21:18.000000000 +0100
-@@ -38,7 +38,7 @@
- #endif
-
- /* read co-processor 15, register #1 (control register) */
--static unsigned long read_p15_c1 (void)
-+unsigned long read_p15_c1 (void)
- {
- unsigned long value;
-
-@@ -55,7 +55,7 @@
- }
-
- /* write to co-processor 15, register #1 (control register) */
--static void write_p15_c1 (unsigned long value)
-+void write_p15_c1 (unsigned long value)
- {
- #ifdef MMU_DEBUG
- printf ("write %08lx to p15/c1\n", value);
-Index: git/cpu/arm920t/s3c24x0/Makefile
-===================================================================
---- git.orig/cpu/arm920t/s3c24x0/Makefile 2007-01-04 12:21:15.000000000 +0100
-+++ git/cpu/arm920t/s3c24x0/Makefile 2007-01-04 12:21:18.000000000 +0100
-@@ -26,7 +26,7 @@
- LIB = $(obj)lib$(SOC).a
-
- COBJS = i2c.o interrupts.o serial.o speed.o \
-- usb_ohci.o
-+ usb_ohci.o mmc.o nand_read.o nand.o
-
- SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
- OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-Index: git/cpu/arm920t/s3c24x0/mmc.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ git/cpu/arm920t/s3c24x0/mmc.c 2007-01-04 12:21:18.000000000 +0100
-@@ -0,0 +1,568 @@
-+/*
-+ * u-boot S3C2410 MMC/SD card driver
-+ * (C) Copyright 2006 by Harald Welte <laforge at gnumonks.org>
-+ *
-+ * based on u-boot pxa MMC driver and linux/drivers/mmc/s3c2410mci.c
-+ * (C) 2005-2005 Thomas Kleffel
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <config.h>
-+#include <common.h>
-+#include <mmc.h>
-+#include <asm/errno.h>
-+#include <asm/io.h>
-+#include <s3c2410.h>
-+#include <part.h>
-+
-+#ifdef CONFIG_MMC
-+
-+#define CONFIG_MMC_WIDE
-+
-+//#define MMC_DEBUG
-+
-+#ifdef MMC_DEBUG
-+#ifdef debug
-+#undef debug
-+#endif
-+#define debug printf
-+#endif
-+
-+static S3C2410_SDI *sdi;
-+
-+extern int
-+fat_register_device(block_dev_desc_t *dev_desc, int part_no);
-+
-+static block_dev_desc_t mmc_dev;
-+
-+block_dev_desc_t * mmc_get_dev(int dev)
-+{
-+ return ((block_dev_desc_t *)&mmc_dev);
-+}
-+
-+/*
-+ * FIXME needs to read cid and csd info to determine block size
-+ * and other parameters
-+ */
-+static uchar mmc_buf[MMC_BLOCK_SIZE];
-+static mmc_csd_t mmc_csd;
-+static int mmc_ready = 0;
-+static int wide = 0;
-+
-+
-+#define CMD_F_RESP 0x01
-+#define CMD_F_RESP_LONG 0x02
-+
-+static u_int32_t *
-+/****************************************************/
-+mmc_cmd(ushort cmd, ulong arg, ushort flags)
-+/****************************************************/
-+{
-+ static u_int32_t resp[5];
-+ ulong status;
-+ int i;
-+
-+ u_int32_t ccon, csta;
-+ u_int32_t csta_rdy_bit = S3C2410_SDICMDSTAT_CMDSENT;
-+
-+ memset(resp, 0, sizeof(resp));
-+
-+ debug("mmc_cmd CMD%d arg=0x%08x flags=%x\n", cmd, arg, flags);
-+
-+ sdi->SDICSTA = 0xffffffff;
-+ sdi->SDIDSTA = 0xffffffff;
-+ sdi->SDIFSTA = 0xffffffff;
-+
-+ sdi->SDICARG = arg;
-+
-+ ccon = cmd & S3C2410_SDICMDCON_INDEX;
-+ ccon |= S3C2410_SDICMDCON_SENDERHOST|S3C2410_SDICMDCON_CMDSTART;
-+
-+ if (flags & CMD_F_RESP) {
-+ ccon |= S3C2410_SDICMDCON_WAITRSP;
-+ csta_rdy_bit = S3C2410_SDICMDSTAT_RSPFIN; /* 1 << 9 */
-+ }
-+
-+ if (flags & CMD_F_RESP_LONG)
-+ ccon |= S3C2410_SDICMDCON_LONGRSP;
-+
-+ sdi->SDICCON = ccon;
-+
-+ while (1) {
-+ csta = sdi->SDICSTA;
-+ if (csta & csta_rdy_bit)
-+ break;
-+ if (csta & S3C2410_SDICMDSTAT_CMDTIMEOUT) {
-+ printf("===============> MMC CMD Timeout\n");
-+ sdi->SDICSTA |= S3C2410_SDICMDSTAT_CMDTIMEOUT;
-+ break;
-+ }
-+ }
-+
-+ debug("final MMC CMD status 0x%x\n", csta);
-+
-+ sdi->SDICSTA |= csta_rdy_bit;
-+
-+ if (flags & CMD_F_RESP) {
-+ resp[0] = sdi->SDIRSP0;
-+ resp[1] = sdi->SDIRSP1;
-+ resp[2] = sdi->SDIRSP2;
-+ resp[3] = sdi->SDIRSP3;
-+ }
-+
-+#if 0
-+ for (i=0; i<4; i ++) {
-+ debug("MMC resp[%d] = 0x%08x\n", i, resp[i]);
-+ }
-+#endif
-+
-+ return resp;
-+}
-+
-+#define FIFO_FILL(host) ((host->SDIFSTA & S3C2410_SDIFSTA_COUNTMASK) >> 2)
-+
-+static int
-+/****************************************************/
-+mmc_block_read(uchar *dst, ulong src, ulong len)
-+/****************************************************/
-+{
-+ u_int32_t dcon, fifo;
-+ u_int32_t *dst_u32 = (u_int32_t *)dst;
-+ u_int32_t *resp;
-+
-+ if (len == 0) {
-+ return 0;
-+ }
-+
-+ debug("mmc_block_rd dst %lx src %lx len %d\n", (ulong)dst, src, len);
-+
-+ /* set block len */
-+ resp = mmc_cmd(MMC_CMD_SET_BLOCKLEN, len, CMD_F_RESP);
-+ sdi->SDIBSIZE = len;
-+
-+ //sdi->SDIPRE = 0xff;
-+
-+ /* setup data */
-+ dcon = (len >> 9) & S3C2410_SDIDCON_BLKNUM_MASK;
-+ dcon |= S3C2410_SDIDCON_BLOCKMODE;
-+ dcon |= S3C2410_SDIDCON_RXAFTERCMD|S3C2410_SDIDCON_XFER_RXSTART;
-+ if (wide)
-+ dcon |= S3C2410_SDIDCON_WIDEBUS;
-+ sdi->SDIDCON = dcon;
-+
-+ /* send read command */
-+ resp = mmc_cmd(MMC_CMD_READ_BLOCK, src, CMD_F_RESP);
-+
-+ while (len > 0) {
-+ u_int32_t sdidsta = sdi->SDIDSTA;
-+ fifo = FIFO_FILL(sdi);
-+ if (sdidsta & (S3C2410_SDIDSTA_FIFOFAIL|
-+ S3C2410_SDIDSTA_CRCFAIL|
-+ S3C2410_SDIDSTA_RXCRCFAIL|
-+ S3C2410_SDIDSTA_DATATIMEOUT)) {
-+ printf("mmc_block_read: err SDIDSTA=0x%08x\n", sdidsta);
-+ return -EIO;
-+ }
-+
-+ while (fifo--) {
-+ //debug("dst_u32 = 0x%08x\n", dst_u32);
-+ *(dst_u32++) = sdi->SDIDAT;
-+ if (len >= 4)
-+ len -= 4;
-+ else {
-+ len = 0;
-+ break;
-+ }
-+ }
-+ }
-+
-+#if 1
-+ debug("waiting for SDIDSTA (currently 0x%08x\n", sdi->SDIDSTA);
-+ while (!(sdi->SDIDSTA & (1 << 4))) {}
-+ debug("done waiting for SDIDSTA (currently 0x%08x\n", sdi->SDIDSTA);
-+#endif
-+
-+ sdi->SDIDCON = 0;
-+
-+#if 0
-+ if (!(sdi->SDIDSTA & S3C2410_SDIDSTA_XFERFINISH))
-+ printf("mmc_block_read; transfer not finished!\n");
-+#endif
-+
-+ return 0;
-+}
-+
-+static int
-+/****************************************************/
-+mmc_block_write(ulong dst, uchar *src, int len)
-+/****************************************************/
-+{
-+#if 0
-+ uchar *resp;
-+ ushort argh, argl;
-+ ulong status;
-+
-+ if (len == 0) {
-+ return 0;
-+ }
-+
-+ debug("mmc_block_wr dst %lx src %lx len %d\n", dst, (ulong)src, len);
-+
-+ argh = len >> 16;
-+ argl = len & 0xffff;
-+
-+ /* set block len */
-+ resp = mmc_cmd(MMC_CMD_SET_BLOCKLEN, argh, argl, CMD_F_RESP);
-+
-+ /* send write command */
-+ argh = dst >> 16;
-+ argl = dst & 0xffff;
-+ MMC_STRPCL = MMC_STRPCL_STOP_CLK;
-+ MMC_NOB = 1;
-+ MMC_BLKLEN = len;
-+ resp = mmc_cmd(MMC_CMD_WRITE_BLOCK, dst, CMD_F_RESP,
-+ MMC_CMDAT_R1|MMC_CMDAT_WRITE|MMC_CMDAT_BLOCK|MMC_CMDAT_DATA_EN);
-+
-+ MMC_I_MASK = ~MMC_I_MASK_TXFIFO_WR_REQ;
-+ while (len) {
-+ if (MMC_I_REG & MMC_I_REG_TXFIFO_WR_REQ) {
-+ int i, bytes = min(32,len);
-+
-+ for (i=0; i<bytes; i++) {
-+ MMC_TXFIFO = *src++;
-+ }
-+ if (bytes < 32) {
-+ MMC_PRTBUF = MMC_PRTBUF_BUF_PART_FULL;
-+ }
-+ len -= bytes;
-+ }
-+ status = MMC_STAT;
-+ if (status & MMC_STAT_ERRORS) {
-+ printf("MMC_STAT error %lx\n", status);
-+ return -1;
-+ }
-+ }
-+ MMC_I_MASK = ~MMC_I_MASK_DATA_TRAN_DONE;
-+ while (!(MMC_I_REG & MMC_I_REG_DATA_TRAN_DONE));
-+ MMC_I_MASK = ~MMC_I_MASK_PRG_DONE;
-+ while (!(MMC_I_REG & MMC_I_REG_PRG_DONE));
-+ status = MMC_STAT;
-+ if (status & MMC_STAT_ERRORS) {
-+ printf("MMC_STAT error %lx\n", status);
-+ return -1;
-+ }
-+#endif
-+ return 0;
-+}
-+
-+
-+int
-+/****************************************************/
-+mmc_read(ulong src, uchar *dst, int size)
-+/****************************************************/
-+{
-+ ulong end, part_start, part_end, part_len, aligned_start, aligned_end;
-+ ulong mmc_block_size, mmc_block_address;
-+
-+ if (size == 0) {
-+ return 0;
-+ }
-+
-+ if (!mmc_ready) {
-+ printf("Please initialize the MMC first\n");
-+ return -1;
-+ }
-+
-+ mmc_block_size = MMC_BLOCK_SIZE;
-+ mmc_block_address = ~(mmc_block_size - 1);
-+
-+ src -= CFG_MMC_BASE;
-+ end = src + size;
-+ part_start = ~mmc_block_address & src;
-+ part_end = ~mmc_block_address & end;
-+ aligned_start = mmc_block_address & src;
-+ aligned_end = mmc_block_address & end;
-+
-+ /* all block aligned accesses */
-+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+ if (part_start) {
-+ part_len = mmc_block_size - part_start;
-+ debug("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+ if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < 0) {
-+ return -1;
-+ }
-+ memcpy(dst, mmc_buf+part_start, part_len);
-+ dst += part_len;
-+ src += part_len;
-+ }
-+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+ for (; src < aligned_end; src += mmc_block_size, dst += mmc_block_size) {
-+ debug("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+ if ((mmc_block_read((uchar *)(dst), src, mmc_block_size)) < 0) {
-+ return -1;
-+ }
-+ }
-+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+ if (part_end && src < end) {
-+ debug("pe src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+ if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) {
-+ return -1;
-+ }
-+ memcpy(dst, mmc_buf, part_end);
-+ }
-+ return 0;
-+}
-+
-+int
-+/****************************************************/
-+mmc_write(uchar *src, ulong dst, int size)
-+/****************************************************/
-+{
-+ ulong end, part_start, part_end, part_len, aligned_start, aligned_end;
-+ ulong mmc_block_size, mmc_block_address;
-+
-+ if (size == 0) {
-+ return 0;
-+ }
-+
-+ if (!mmc_ready) {
-+ printf("Please initialize the MMC first\n");
-+ return -1;
-+ }
-+
-+ mmc_block_size = MMC_BLOCK_SIZE;
-+ mmc_block_address = ~(mmc_block_size - 1);
-+
-+ dst -= CFG_MMC_BASE;
-+ end = dst + size;
-+ part_start = ~mmc_block_address & dst;
-+ part_end = ~mmc_block_address & end;
-+ aligned_start = mmc_block_address & dst;
-+ aligned_end = mmc_block_address & end;
-+
-+ /* all block aligned accesses */
-+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+ if (part_start) {
-+ part_len = mmc_block_size - part_start;
-+ debug("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+ (ulong)src, dst, end, part_start, part_end, aligned_start, aligned_end);
-+ if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < 0) {
-+ return -1;
-+ }
-+ memcpy(mmc_buf+part_start, src, part_len);
-+ if ((mmc_block_write(aligned_start, mmc_buf, mmc_block_size)) < 0) {
-+ return -1;
-+ }
-+ dst += part_len;
-+ src += part_len;
-+ }
-+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+ for (; dst < aligned_end; src += mmc_block_size, dst += mmc_block_size) {
-+ debug("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+ if ((mmc_block_write(dst, (uchar *)src, mmc_block_size)) < 0) {
-+ return -1;
-+ }
-+ }
-+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+ if (part_end && dst < end) {
-+ debug("pe src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
-+ if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) {
-+ return -1;
-+ }
-+ memcpy(mmc_buf, src, part_end);
-+ if ((mmc_block_write(aligned_end, mmc_buf, mmc_block_size)) < 0) {
-+ return -1;
-+ }
-+ }
-+ return 0;
-+}
-+
-+ulong
-+/****************************************************/
-+mmc_bread(int dev_num, ulong blknr, ulong blkcnt, ulong *dst)
-+/****************************************************/
-+{
-+ int mmc_block_size = MMC_BLOCK_SIZE;
-+ ulong src = blknr * mmc_block_size + CFG_MMC_BASE;
-+
-+ mmc_read(src, (uchar *)dst, blkcnt*mmc_block_size);
-+ return blkcnt;
-+}
-+
-+static u_int16_t rca = MMC_DEFAULT_RCA;
-+
-+static u_int32_t mmc_size(const struct mmc_csd *csd)
-+{
-+ u_int32_t block_len, mult, blocknr;
-+
-+ block_len = csd->read_bl_len << 12;
-+ mult = csd->c_size_mult1 << 8;
-+ blocknr = (csd->c_size+1) * mult;
-+
-+ return blocknr * block_len;
-+}
-+
-+int
-+/****************************************************/
-+mmc_init(int verbose)
-+/****************************************************/
-+{
-+ int retries, rc = -ENODEV;
-+ int is_sd = 0;
-+ u_int32_t *resp;
-+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-+
-+ sdi = S3C2410_GetBase_SDI();
-+
-+ debug("mmc_init(PCLK=%u)\n", get_PCLK());
-+
-+ clk_power->CLKCON |= (1 << 9);
-+
-+ /* S3C2410 has some bug that prevents reliable operation at higher speed */
-+ //sdi->SDIPRE = 0x3e; /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */
-+ sdi->SDIPRE = 0x02; /* SDCLK = PCLK/2 / (SDIPRE+1) = 396kHz */
-+ sdi->SDIBSIZE = 512;
-+ sdi->SDIDTIMER = 0xffff;
-+ sdi->SDIIMSK = 0x0;
-+ sdi->SDICON = S3C2410_SDICON_FIFORESET|S3C2440_SDICON_MMCCLOCK;
-+ udelay(125000); /* FIXME: 74 SDCLK cycles */
-+
-+ mmc_csd.c_size = 0;
-+
-+ /* reset */
-+ retries = 10;
-+ resp = mmc_cmd(MMC_CMD_RESET, 0, 0);
-+
-+ printf("trying to detect SD Card...\n");
-+ while (retries--) {
-+ int i;
-+ udelay(100000);
-+ resp = mmc_cmd(55, 0x00000000, CMD_F_RESP);
-+ resp = mmc_cmd(41, 0x00300000, CMD_F_RESP);
-+
-+ if (resp[0] & (1 << 31)) {
-+ is_sd = 1;
-+ break;
-+ }
-+ }
-+
-+ if (retries == 0 && !is_sd) {
-+ retries = 10;
-+ printf("failed to detect SD Card, trying MMC\n");
-+ resp = mmc_cmd(MMC_CMD_SEND_OP_COND, 0x00ffc000, CMD_F_RESP);
-+ while (retries-- && resp && !(resp[4] & 0x80)) {
-+ debug("resp %x %x\n", resp[0], resp[1]);
-+ udelay(50);
-+ resp = mmc_cmd(1, 0x00ffff00, CMD_F_RESP);
-+ }
-+ }
-+
-+ /* try to get card id */
-+ resp = mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, CMD_F_RESP|CMD_F_RESP_LONG);
-+ if (resp) {
-+ /* TODO configure mmc driver depending on card attributes */
-+ mmc_cid_t *cid = (mmc_cid_t *)resp;
-+ if (verbose) {
-+ printf("MMC found. Card desciption is:\n");
-+ printf("Manufacturer ID = %02x%02x%02x\n",
-+ cid->id[0], cid->id[1], cid->id[2]);
-+ printf("HW/FW Revision = %x %x\n",cid->hwrev, cid->fwrev);
-+ cid->hwrev = cid->fwrev = 0; /* null terminate string */
-+ printf("Product Name = %s\n",cid->name);
-+ printf("Serial Number = %02x%02x%02x\n",
-+ cid->sn[0], cid->sn[1], cid->sn[2]);
-+ printf("Month = %d\n",cid->month);
-+ printf("Year = %d\n",1997 + cid->year);
-+ }
-+ /* fill in device description */
-+ mmc_dev.if_type = IF_TYPE_MMC;
-+ mmc_dev.part_type = PART_TYPE_DOS;
-+ mmc_dev.dev = 0;
-+ mmc_dev.lun = 0;
-+ mmc_dev.type = 0;
-+ /* FIXME fill in the correct size (is set to 32MByte) */
-+ mmc_dev.blksz = 512;
-+ mmc_dev.lba = 0x10000;
-+ sprintf(mmc_dev.vendor,"Man %02x%02x%02x Snr %02x%02x%02x",
-+ cid->id[0], cid->id[1], cid->id[2],
-+ cid->sn[0], cid->sn[1], cid->sn[2]);
-+ sprintf(mmc_dev.product,"%s",cid->name);
-+ sprintf(mmc_dev.revision,"%x %x",cid->hwrev, cid->fwrev);
-+ mmc_dev.removable = 0;
-+ mmc_dev.block_read = mmc_bread;
-+
-+ /* MMC exists, get CSD too */
-+ resp = mmc_cmd(MMC_CMD_SET_RCA, MMC_DEFAULT_RCA, CMD_F_RESP);
-+ if (is_sd)
-+ rca = resp[0] >> 16;
-+
-+ resp = mmc_cmd(MMC_CMD_SEND_CSD, rca<<16, CMD_F_RESP|CMD_F_RESP_LONG);
-+ if (resp) {
-+ mmc_csd_t *csd = (mmc_csd_t *)resp;
-+ memcpy(&mmc_csd, csd, sizeof(csd));
-+ rc = 0;
-+ mmc_ready = 1;
-+ /* FIXME add verbose printout for csd */
-+ printf("READ_BL_LEN=%u, C_SIZE_MULT=%u, C_SIZE=%u\n",
-+ csd->read_bl_len, csd->c_size_mult1, csd->c_size);
-+ printf("size = %u\n", mmc_size(csd));
-+ }
-+ }
-+
-+ resp = mmc_cmd(MMC_CMD_SELECT_CARD, rca<<16, CMD_F_RESP);
-+
-+#ifdef CONFIG_MMC_WIDE
-+ if (is_sd) {
-+ resp = mmc_cmd(55, rca<<16, CMD_F_RESP);
-+ resp = mmc_cmd(6, 0x02, CMD_F_RESP);
-+ wide = 1;
-+ }
-+#endif
-+
-+ fat_register_device(&mmc_dev,1); /* partitions start counting with 1 */
-+
-+ return rc;
-+}
-+
-+int
-+mmc_ident(block_dev_desc_t *dev)
-+{
-+ return 0;
-+}
-+
-+int
-+mmc2info(ulong addr)
-+{
-+ /* FIXME hard codes to 32 MB device */
-+ if (addr >= CFG_MMC_BASE && addr < CFG_MMC_BASE + 0x02000000) {
-+ return 1;
-+ }
-+ return 0;
-+}
-+
-+#endif /* CONFIG_MMC */
-Index: git/cpu/arm920t/s3c24x0/nand.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ git/cpu/arm920t/s3c24x0/nand.c 2007-01-04 12:21:45.000000000 +0100
-@@ -0,0 +1,213 @@
-+/*
-+ * (C) Copyright 2006 Harald Welte <hwelte at hmw-consulting.de>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+
-+#if 0
-+#define DEBUGN printf
-+#else
-+#define DEBUGN(x, args ...) {}
-+#endif
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
-+#if !defined(CFG_NAND_LEGACY)
-+
-+#include <nand.h>
-+#include <s3c2410.h>
-+
-+#define __REGb(x) (*(volatile unsigned char *)(x))
-+#define __REGi(x) (*(volatile unsigned int *)(x))
-+
-+#define NF_BASE 0x4e000000
-+#define NFCONF __REGi(NF_BASE + 0x0)
-+#define NFCMD __REGb(NF_BASE + 0x4)
-+#define NFADDR __REGb(NF_BASE + 0x8)
-+#define NFDATA __REGb(NF_BASE + 0xc)
-+#define NFSTAT __REGb(NF_BASE + 0x10)
-+
-+#define S3C2410_NFCONF_EN (1<<15)
-+#define S3C2410_NFCONF_512BYTE (1<<14)
-+#define S3C2410_NFCONF_4STEP (1<<13)
-+#define S3C2410_NFCONF_INITECC (1<<12)
-+#define S3C2410_NFCONF_nFCE (1<<11)
-+#define S3C2410_NFCONF_TACLS(x) ((x)<<8)
-+#define S3C2410_NFCONF_TWRPH0(x) ((x)<<4)
-+#define S3C2410_NFCONF_TWRPH1(x) ((x)<<0)
-+
-+static u16 s3c2410_read_word(struct mtd_info *mtd)
-+{
-+ unsigned char byte = 0;
-+
-+ printf("s3c2410_read_word: WARNING, this function is not implemented yet\n");
-+ return byte;
-+}
-+
-+static void s3c2410_write_word(struct mtd_info *mtd, u16 word)
-+{
-+ printf("s3c2410_write_word: WARNING, this function is not implemented yet\n");
-+}
-+
-+static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+
-+ DEBUGN("hwcontrol(): 0x%02x: ", cmd);
-+
-+ switch (cmd) {
-+ case NAND_CTL_SETNCE:
-+ NFCONF &= ~S3C2410_NFCONF_nFCE;
-+ DEBUGN("NFCONF=0x%08x\n", NFCONF);
-+ break;
-+ case NAND_CTL_CLRNCE:
-+ NFCONF |= S3C2410_NFCONF_nFCE;
-+ DEBUGN("NFCONF=0x%08x\n", NFCONF);
-+ break;
-+ case NAND_CTL_SETALE:
-+ chip->IO_ADDR_W = NF_BASE + 0x8;
-+ DEBUGN("SETALE\n");
-+ break;
-+ case NAND_CTL_SETCLE:
-+ chip->IO_ADDR_W = NF_BASE + 0x4;
-+ DEBUGN("SETCLE\n");
-+ break;
-+ default:
-+ chip->IO_ADDR_W = NF_BASE + 0xc;
-+ break;
-+ }
-+ return;
-+}
-+
-+static int s3c2410_dev_ready(struct mtd_info *mtd)
-+{
-+ DEBUGN("dev_ready\n");
-+ return (NFSTAT & 0x01);
-+}
-+
-+static void s3c2410_cmdfunc(struct mtd_info *mtd, unsigned cmd,
-+ int column, int page_addr)
-+{
-+ DEBUGN("cmdfunc(): 0x%02x, col=%d, page=%d\n", cmd, column, page_addr);
-+
-+ switch (cmd) {
-+ case NAND_CMD_READ0:
-+ case NAND_CMD_READ1:
-+ case NAND_CMD_READOOB:
-+ NFCMD = cmd;
-+ NFADDR = column & 0xff;
-+ NFADDR = page_addr & 0xff;
-+ NFADDR = (page_addr >> 8) & 0xff;
-+ NFADDR = (page_addr >> 16) & 0xff;
-+ break;
-+ case NAND_CMD_READID:
-+ NFCMD = cmd;
-+ NFADDR = 0;
-+ break;
-+ case NAND_CMD_PAGEPROG:
-+ NFCMD = cmd;
-+ printf("PAGEPROG not implemented\n");
-+ break;
-+ case NAND_CMD_ERASE1:
-+ NFCMD = cmd;
-+ NFADDR = page_addr & 0xff;
-+ NFADDR = (page_addr >> 8) & 0xff;
-+ NFADDR = (page_addr >> 16) & 0xff;
-+ break;
-+ case NAND_CMD_ERASE2:
-+ NFCMD = cmd;
-+ break;
-+ case NAND_CMD_SEQIN:
-+ printf("SEQIN not implemented\n");
-+ break;
-+ case NAND_CMD_STATUS:
-+ NFCMD = cmd;
-+ break;
-+ case NAND_CMD_RESET:
-+ NFCMD = cmd;
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ while (!s3c2410_dev_ready(mtd));
-+}
-+
-+int board_nand_init(struct nand_chip *nand)
-+{
-+ u_int32_t cfg;
-+ u_int8_t tacls, twrph0, twrph1;
-+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-+
-+ DEBUGN("board_nand_init()\n");
-+
-+ clk_power->CLKCON |= (1 << 4);
-+
-+ /* initialize hardware */
-+ twrph0 = 3; twrph1 = 0; tacls = 0;
-+
-+ /* default timings: maximum */
-+ //twrph0 = 8; twrph1 = 8; tacls = 8;
-+
-+ cfg = S3C2410_NFCONF_EN;
-+ cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
-+ cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
-+ cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
-+
-+ //NFCONF = cfg;
-+ NFCONF = 0xf842;
-+
-+ /* initialize nand_chip data structure */
-+ nand->IO_ADDR_R = nand->IO_ADDR_W = 0x4e00000c;
-+
-+ /* read_buf and write_buf are default */
-+ /* read_byte and write_byte are default */
-+
-+ /* need to override word read/write since default routines try 16bit wide
-+ * register access of an (in our case) 8bit register */
-+ nand->read_word = s3c2410_read_word;
-+ nand->write_word = s3c2410_write_word;
-+
-+ /* hwcontrol always must be implemented */
-+ nand->hwcontrol = s3c2410_hwcontrol;
-+
-+ nand->dev_ready = s3c2410_dev_ready;
-+
-+ nand->eccmode = NAND_ECC_SOFT;
-+ nand->options = 0;
-+ //nand->waitfunc = dfc_wait;
-+
-+ //nand->cmdfunc = s3c2410_cmdfunc;
-+ //nand->autooob = &delta_oob;
-+ //nand->badblock_pattern = &delta_bbt_descr;
-+
-+#if 0
-+ /* reset */
-+ nand->hwcontrol(NULL, NAND_CTL_SETNCE);
-+ nand->cmdfunc(NULL, NAND_CMD_RESET, -1, -1);
-+ while (nand->dev_ready(NULL) == 0) {}
-+ nand->hwcontrol(NULL, NAND_CTL_CLRNCE);
-+#endif
-+
-+ DEBUGN("end of nand_init\n");
-+ return 0;
-+}
-+
-+#else
-+ #error "U-Boot legacy NAND support not available for S3C2410"
-+#endif
-+#endif
-Index: git/cpu/arm920t/s3c24x0/nand_read.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ git/cpu/arm920t/s3c24x0/nand_read.c 2007-01-04 12:21:18.000000000 +0100
-@@ -0,0 +1,75 @@
-+/*
-+ * nand_read.c: Simple NAND read functions for booting from NAND
-+ *
-+ * Taken from GPLv2 licensed vivi bootloader,
-+ * Copyright (C) 2002 MIZI Research, Inc.
-+ *
-+ * Author: Hwang, Chideok <hwang at mizi.com>
-+ * Date : $Date: 2004/02/04 10:37:37 $
-+ *
-+ * u-boot integration (C) 2006 by Harald Welte <hwelte at hmw-consulting.de>
-+ */
-+
-+#include <common.h>
-+
-+#ifdef CONFIG_S3C2410_NAND_BOOT
-+
-+#define __REGb(x) (*(volatile unsigned char *)(x))
-+#define __REGi(x) (*(volatile unsigned int *)(x))
-+#define NF_BASE 0x4e000000
-+#define NFCONF __REGi(NF_BASE + 0x0)
-+#define NFCMD __REGb(NF_BASE + 0x4)
-+#define NFADDR __REGb(NF_BASE + 0x8)
-+#define NFDATA __REGb(NF_BASE + 0xc)
-+#define NFSTAT __REGb(NF_BASE + 0x10)
-+
-+#define BUSY 1
-+inline void wait_idle(void) {
-+ int i;
-+
-+ while(!(NFSTAT & BUSY))
-+ for(i=0; i<10; i++);
-+}
-+
-+#define NAND_SECTOR_SIZE 512
-+#define NAND_BLOCK_MASK (NAND_SECTOR_SIZE - 1)
-+
-+/* low level nand read function */
-+int
-+nand_read_ll(unsigned char *buf, unsigned long start_addr, int size)
-+{
-+ int i, j;
-+
-+ if ((start_addr & NAND_BLOCK_MASK) || (size & NAND_BLOCK_MASK)) {
-+ return -1; /* invalid alignment */
-+ }
-+
-+ /* chip Enable */
-+ NFCONF &= ~0x800;
-+ for(i=0; i<10; i++);
-+
-+ for(i=start_addr; i < (start_addr + size);) {
-+ /* READ0 */
-+ NFCMD = 0;
-+
-+ /* Write Address */
-+ NFADDR = i & 0xff;
-+ NFADDR = (i >> 9) & 0xff;
-+ NFADDR = (i >> 17) & 0xff;
-+ NFADDR = (i >> 25) & 0xff;
-+
-+ wait_idle();
-+
-+ for(j=0; j < NAND_SECTOR_SIZE; j++, i++) {
-+ *buf = (NFDATA & 0xff);
-+ buf++;
-+ }
-+ }
-+
-+ /* chip Disable */
-+ NFCONF |= 0x800; /* chip disable */
-+
-+ return 0;
-+}
-+
-+#endif /* CONFIG_S3C2410_NAND_BOOT */
-Index: git/cpu/arm920t/start.S
-===================================================================
---- git.orig/cpu/arm920t/start.S 2007-01-04 12:21:15.000000000 +0100
-+++ git/cpu/arm920t/start.S 2007-01-04 12:21:18.000000000 +0100
-@@ -5,6 +5,10 @@
- * Copyright (c) 2002 Alex Züpke <azu at sysgo.de>
- * Copyright (c) 2002 Gary Jennejohn <gj at denx.de>
- *
-+ * S3C2410 NAND portions
-+ * Copyright (c) 2001 MIZI Research, Inc.
-+ * Copyright (c) 2006 Harald Welte <hwelte at hmw-consulting.de>
-+ *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
-@@ -27,6 +31,7 @@
-
- #include <config.h>
- #include <version.h>
-+#include <s3c2410.h>
-
-
- /*
-@@ -158,9 +163,17 @@
- */
- #ifndef CONFIG_SKIP_LOWLEVEL_INIT
- bl cpu_init_crit
-+#else
-+ /* QT2410: configure bank 3 correctly to make ethernet work */
-+ ldr r1, =0x48000000
-+ ldr r2, =0x00001f4c
-+ str r2, [r1, #0x10]
-+ ldr r2, =0x2211d122
-+ str r2, [r1]
- #endif
-
- #ifndef CONFIG_SKIP_RELOCATE_UBOOT
-+#ifndef CONFIG_S3C2410_NAND_BOOT
- relocate: /* relocate U-Boot to RAM */
- adr r0, _start /* r0 <- current position of code */
- ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
-@@ -177,6 +190,93 @@
- stmia r1!, {r3-r10} /* copy to target address [r1] */
- cmp r0, r2 /* until source end addreee [r2] */
- ble copy_loop
-+#else /* NAND_BOOT */
-+relocate:
-+copy_myself:
-+ /* mov r10, lr */
-+
-+ @ reset NAND
-+ mov r1, #S3C2410_NAND_BASE
-+ ldr r2, =0xf842 @ initial value enable tacls=3,rph0=6,rph1=0
-+ str r2, [r1, #oNFCONF]
-+ ldr r2, [r1, #oNFCONF]
-+ bic r2, r2, #0x800 @ enable chip
-+ str r2, [r1, #oNFCONF]
-+ mov r2, #0xff @ RESET command
-+ strb r2, [r1, #oNFCMD]
-+ mov r3, #0 @ wait
-+1: add r3, r3, #0x1
-+ cmp r3, #0xa
-+ blt 1b
-+2: ldr r2, [r1, #oNFSTAT] @ wait ready
-+ tst r2, #0x1
-+ beq 2b
-+ ldr r2, [r1, #oNFCONF]
-+ orr r2, r2, #0x800 @ disable chip
-+ str r2, [r1, #oNFCONF]
-+
-+#if 0
-+ @ get ready to call C functions (for nand_read())
-+ ldr sp, DW_STACK_START @ setup stack pointer
-+ mov fp, #0 @ no previous frame, so fp=0
-+#else
-+ ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
-+ sub r0, r0, #CFG_MALLOC_LEN /* malloc area */
-+ sub r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo */
-+#ifdef CONFIG_USE_IRQ
-+ sub r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
-+#endif
-+ sub sp, r0, #12 /* leave 3 words for abort-stack */
-+#endif
-+
-+ @ copy u-boot to RAM
-+ ldr r0, _TEXT_BASE
-+ mov r1, #0x0
-+ mov r2, #0x30000
-+ bl nand_read_ll
-+
-+ tst r0, #0x0
-+ beq ok_nand_read
-+#ifdef CONFIG_DEBUG_LL
-+bad_nand_read:
-+ ldr r0, STR_FAIL
-+ ldr r1, SerBase
-+ bl PrintWord
-+1: b 1b @ infinite loop
-+#endif
-+
-+ok_nand_read:
-+#ifdef CONFIG_DEBUG_LL
-+ ldr r0, STR_OK
-+ ldr r1, SerBase
-+ bl PrintWord
-+#endif
-+
-+ @ verify
-+ mov r0, #0
-+ @ldr r1, =0x33f00000
-+ ldr r1, _TEXT_BASE
-+ mov r2, #0x400 @ 4 bytes * 1024 = 4K-bytes
-+go_next:
-+ ldr r3, [r0], #4
-+ ldr r4, [r1], #4
-+ teq r3, r4
-+ bne notmatch
-+ subs r2, r2, #4
-+ beq done_nand_read
-+ bne go_next
-+notmatch:
-+#ifdef CONFIG_DEBUG_LL
-+ sub r0, r0, #4
-+ ldr r1, SerBase
-+ bl PrintHexWord
-+ ldr r0, STR_FAIL
-+ ldr r1, SerBase
-+ bl PrintWord
-+#endif
-+1: b 1b
-+done_nand_read:
-+#endif /* NAND_BOOT */
- #endif /* CONFIG_SKIP_RELOCATE_UBOOT */
-
- /* Set up the stack */
-Index: git/drivers/Makefile
-===================================================================
---- git.orig/drivers/Makefile 2007-01-04 12:21:15.000000000 +0100
-+++ git/drivers/Makefile 2007-01-04 12:21:18.000000000 +0100
-@@ -51,7 +51,7 @@
- ks8695eth.o \
- pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \
- rpx_pcmcia.o \
-- fsl_i2c.o
-+ fsl_i2c.o s3c2410_fb.o
-
- SRCS := $(COBJS:.o=.c)
- OBJS := $(addprefix $(obj),$(COBJS))
-Index: git/drivers/cs8900.c
-===================================================================
---- git.orig/drivers/cs8900.c 2007-01-04 12:21:15.000000000 +0100
-+++ git/drivers/cs8900.c 2007-01-04 12:21:18.000000000 +0100
-@@ -120,6 +120,7 @@
- unsigned char env_enetaddr[6];
- char *tmp = getenv ("ethaddr");
- char *end;
-+ unsigned short chip_id;
-
- for (i=0; i<6; i++) {
- env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
-@@ -128,7 +129,9 @@
- }
-
- /* verify chip id */
-- if (get_reg_init_bus (PP_ChipID) != 0x630e)
-+ chip_id = get_reg_init_bus (PP_ChipID);
-+ printf("\ncs8900a chipid 0x%04x\n", chip_id);
-+ if (chip_id != 0x630e)
- return;
- eth_reset ();
- if ((get_reg (PP_SelfST) & (PP_SelfSTAT_EEPROM | PP_SelfSTAT_EEPROM_OK)) ==
-Index: git/drivers/s3c2410_fb.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ git/drivers/s3c2410_fb.c 2007-01-04 12:21:18.000000000 +0100
-@@ -0,0 +1,182 @@
-+/*
-+ * (C) Copyright 2006 Harald Welte <hwelte at hmw-consulting.de>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+
-+#if defined(CONFIG_VIDEO_S3C2410)
-+
-+#include <video_fb.h>
-+#include "videomodes.h"
-+#include <s3c2410.h>
-+/*
-+ * Export Graphic Device
-+ */
-+GraphicDevice smi;
-+
-+#define VIDEO_MEM_SIZE 0x200000
-+
-+/*******************************************************************************
-+ *
-+ * Init video chip with common Linux graphic modes (lilo)
-+ */
-+void *video_hw_init (void)
-+{
-+ S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD();
-+ GraphicDevice *pGD = (GraphicDevice *)&smi;
-+ int videomode;
-+ unsigned long t1, hsynch, vsynch;
-+ char *penv;
-+ int tmp, i, bits_per_pixel;
-+ struct ctfb_res_modes *res_mode;
-+ struct ctfb_res_modes var_mode;
-+ unsigned char videoout;
-+ unsigned int *vm;
-+
-+ /* Search for video chip */
-+ printf("Video: ");
-+
-+ tmp = 0;
-+
-+ videomode = CFG_DEFAULT_VIDEO_MODE;
-+ /* get video mode via environment */
-+ if ((penv = getenv ("videomode")) != NULL) {
-+ /* deceide if it is a string */
-+ if (penv[0] <= '9') {
-+ videomode = (int) simple_strtoul (penv, NULL, 16);
-+ tmp = 1;
-+ }
-+ } else {
-+ tmp = 1;
-+ }
-+ if (tmp) {
-+ /* parameter are vesa modes */
-+ /* search params */
-+ for (i = 0; i < VESA_MODES_COUNT; i++) {
-+ if (vesa_modes[i].vesanr == videomode)
-+ break;
-+ }
-+ if (i == VESA_MODES_COUNT) {
-+ printf ("no VESA Mode found, switching to mode 0x%x ", CFG_DEFAULT_VIDEO_MODE);
-+ i = 0;
-+ }
-+ res_mode =
-+ (struct ctfb_res_modes *) &res_mode_init[vesa_modes[i].
-+ resindex];
-+ bits_per_pixel = vesa_modes[i].bits_per_pixel;
-+ } else {
-+
-+ res_mode = (struct ctfb_res_modes *) &var_mode;
-+ bits_per_pixel = video_get_params (res_mode, penv);
-+ }
-+
-+ /* calculate hsynch and vsynch freq (info only) */
-+ t1 = (res_mode->left_margin + res_mode->xres +
-+ res_mode->right_margin + res_mode->hsync_len) / 8;
-+ t1 *= 8;
-+ t1 *= res_mode->pixclock;
-+ t1 /= 1000;
-+ hsynch = 1000000000L / t1;
-+ t1 *=
-+ (res_mode->upper_margin + res_mode->yres +
-+ res_mode->lower_margin + res_mode->vsync_len);
-+ t1 /= 1000;
-+ vsynch = 1000000000L / t1;
-+
-+ /* fill in Graphic device struct */
-+ sprintf (pGD->modeIdent, "%dx%dx%d %ldkHz %ldHz", res_mode->xres,
-+ res_mode->yres, bits_per_pixel, (hsynch / 1000),
-+ (vsynch / 1000));
-+ printf ("%s\n", pGD->modeIdent);
-+ pGD->winSizeX = res_mode->xres;
-+ pGD->winSizeY = res_mode->yres;
-+ pGD->plnSizeX = res_mode->xres;
-+ pGD->plnSizeY = res_mode->yres;
-+ switch (bits_per_pixel) {
-+ case 8:
-+ pGD->gdfBytesPP = 1;
-+ pGD->gdfIndex = GDF__8BIT_INDEX;
-+ break;
-+ case 15:
-+ pGD->gdfBytesPP = 2;
-+ pGD->gdfIndex = GDF_15BIT_555RGB;
-+ break;
-+ case 16:
-+ pGD->gdfBytesPP = 2;
-+ pGD->gdfIndex = GDF_16BIT_565RGB;
-+ break;
-+ case 24:
-+ pGD->gdfBytesPP = 3;
-+ pGD->gdfIndex = GDF_24BIT_888RGB;
-+ break;
-+ }
-+
-+#if 0
-+ pGD->isaBase = CFG_ISA_IO;
-+ pGD->pciBase = pci_mem_base;
-+ pGD->dprBase = (pci_mem_base + 0x400000 + 0x8000);
-+ pGD->vprBase = (pci_mem_base + 0x400000 + 0xc000);
-+ pGD->cprBase = (pci_mem_base + 0x400000 + 0xe000);
-+#endif
-+ pGD->frameAdrs = LCD_VIDEO_ADDR;
-+ pGD->memSize = VIDEO_MEM_SIZE;
-+
-+ lcd->LCDSADDR1 = LCD_VIDEO_ADDR >> 1;
-+ lcd->LCDSADDR2 = (LCD_VIDEO_ADDR + 0x4b000) >> 1;
-+ lcd->LCDSADDR3 = 0x000000f0;
-+
-+ lcd->LCDCON1 = 0x00000479;
-+ lcd->LCDCON2 = 0x014fc183;
-+ lcd->LCDCON3 = 0x0060ef07;
-+ lcd->LCDCON4 = 0x00000003;
-+ lcd->LCDCON5 = 0x00000b09;
-+ lcd->LPCSEL = 0x00000cf0;
-+
-+ pGD->winSizeX = pGD->plnSizeX = 240;
-+ pGD->winSizeY = pGD->plnSizeY = 320;
-+ pGD->gdfBytesPP = 2;
-+ pGD->gdfIndex = GDF_16BIT_565RGB;
-+
-+ /* Enable Display */
-+ videoout = 2; /* Default output is CRT */
-+ if ((penv = getenv ("videoout")) != NULL) {
-+ /* deceide if it is a string */
-+ videoout = (int) simple_strtoul (penv, NULL, 16);
-+ }
-+
-+ printf("clearing video memory\n");
-+ /* Clear video memory */
-+ i = pGD->memSize/4;
-+ vm = (unsigned int *)pGD->frameAdrs;
-+ while(i--)
-+ *vm++ = 0;
-+
-+ printf("returning from video_hw_init\n");
-+ return ((void*)&smi);
-+}
-+
-+void
-+video_set_lut (unsigned int index, /* color number */
-+ unsigned char r, /* red */
-+ unsigned char g, /* green */
-+ unsigned char b /* blue */
-+ )
-+{
-+}
-+
-+#endif /* CONFIG_VIDEO_S3C2410 */
-Index: git/drivers/usbdcore_s3c2410.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ git/drivers/usbdcore_s3c2410.c 2007-01-04 12:21:18.000000000 +0100
-@@ -0,0 +1,1609 @@
-+/*
-+ * (C) Copyright 2003
-+ * Gerry Hamel, geh at ti.com, Texas Instruments
-+ *
-+ * Based on
-+ * linux/drivers/usb/device/bi/omap.c
-+ * TI OMAP1510 USB bus interface driver
-+ *
-+ * Author: MontaVista Software, Inc.
-+ * source at mvista.com
-+ * (C) Copyright 2002
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ */
-+
-+#include <common.h>
-+
-+#if defined(CONFIG_S3C2410) && defined(CONFIG_USB_DEVICE)
-+
-+#include <asm/io.h>
-+
-+#include "usbdcore.h"
-+#include "usbdcore_s3c2410.h"
-+#include "usbdcore_ep0.h"
-+
-+
-+#define UDC_INIT_MDELAY 80 /* Device settle delay */
-+#define UDC_MAX_ENDPOINTS 31 /* Number of endpoints on this UDC */
-+
-+/* Some kind of debugging output... */
-+#if 1
-+#define UDCDBG(str)
-+#define UDCDBGA(fmt,args...)
-+#else /* The bugs still exists... */
-+#define UDCDBG(str) serial_printf("[%s] %s:%d: " str "\n", __FILE__,__FUNCTION__,__LINE__)
-+#define UDCDBGA(fmt,args...) serial_printf("[%s] %s:%d: " fmt "\n", __FILE__,__FUNCTION__,__LINE__, ##args)
-+#endif
-+
-+#if 1
-+#define UDCREG(name)
-+#define UDCREGL(name)
-+#else /* The bugs still exists... */
-+#define UDCREG(name) serial_printf("%s():%d: %s[%08x]=%.4x\n",__FUNCTION__,__LINE__, (#name), name, inw(name)) /* For 16-bit regs */
-+#define UDCREGL(name) serial_printf("%s():%d: %s[%08x]=%.8x\n",__FUNCTION__,__LINE__, (#name), name, inl(name)) /* For 32-bit regs */
-+#endif
-+
-+
-+static struct urb *ep0_urb = NULL;
-+
-+static struct usb_device_instance *udc_device; /* Used in interrupt handler */
-+static u16 udc_devstat = 0; /* UDC status (DEVSTAT) */
-+static u32 udc_interrupts = 0;
-+
-+static void udc_stall_ep (unsigned int ep_addr);
-+
-+
-+static struct usb_endpoint_instance *s3c2410_find_ep (int ep)
-+{
-+ int i;
-+
-+ for (i = 0; i < udc_device->bus->max_endpoints; i++) {
-+ if (udc_device->bus->endpoint_array[i].endpoint_address == ep)
-+ return &udc_device->bus->endpoint_array[i];
-+ }
-+ return NULL;
-+}
-+
-+/* ************************************************************************** */
-+/* IO
-+ */
-+
-+/*
-+ * omap1510_prepare_endpoint_for_rx
-+ *
-+ * This function implements TRM Figure 14-11.
-+ *
-+ * The endpoint to prepare for transfer is specified as a physical endpoint
-+ * number. For OUT (rx) endpoints 1 through 15, the corresponding endpoint
-+ * configuration register is checked to see if the endpoint is ISO or not.
-+ * If the OUT endpoint is valid and is non-ISO then its FIFO is enabled.
-+ * No action is taken for endpoint 0 or for IN (tx) endpoints 16 through 30.
-+ */
-+static void omap1510_prepare_endpoint_for_rx (int ep_addr)
-+{
-+ int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
-+
-+ UDCDBGA ("omap1510_prepare_endpoint %x", ep_addr);
-+ if (((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT)) {
-+ if ((inw (UDC_EP_RX (ep_num)) &
-+ (UDC_EPn_RX_Valid | UDC_EPn_RX_Iso)) ==
-+ UDC_EPn_RX_Valid) {
-+ /* rx endpoint is valid, non-ISO, so enable its FIFO */
-+ outw (UDC_EP_Sel | ep_num, UDC_EP_NUM);
-+ outw (UDC_Set_FIFO_En, UDC_CTRL);
-+ outw (0, UDC_EP_NUM);
-+ }
-+ }
-+}
-+
-+/* omap1510_configure_endpoints
-+ *
-+ * This function implements TRM Figure 14-10.
-+ */
-+static void omap1510_configure_endpoints (struct usb_device_instance *device)
-+{
-+ int ep;
-+ struct usb_bus_instance *bus;
-+ struct usb_endpoint_instance *endpoint;
-+ unsigned short ep_ptr;
-+ unsigned short ep_size;
-+ unsigned short ep_isoc;
-+ unsigned short ep_doublebuffer;
-+ int ep_addr;
-+ int packet_size;
-+ int buffer_size;
-+ int attributes;
-+
-+ bus = device->bus;
-+
-+ /* There is a dedicated 2048 byte buffer for USB packets that may be
-+ * arbitrarily partitioned among the endpoints on 8-byte boundaries.
-+ * The first 8 bytes are reserved for receiving setup packets on
-+ * endpoint 0.
-+ */
-+ ep_ptr = 8; /* reserve the first 8 bytes for the setup fifo */
-+
-+ for (ep = 0; ep < bus->max_endpoints; ep++) {
-+ endpoint = bus->endpoint_array + ep;
-+ ep_addr = endpoint->endpoint_address;
-+ if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
-+ /* IN endpoint */
-+ packet_size = endpoint->tx_packetSize;
-+ attributes = endpoint->tx_attributes;
-+ } else {
-+ /* OUT endpoint */
-+ packet_size = endpoint->rcv_packetSize;
-+ attributes = endpoint->rcv_attributes;
-+ }
-+
-+ switch (packet_size) {
-+ case 0:
-+ ep_size = 0;
-+ break;
-+ case 8:
-+ ep_size = 0;
-+ break;
-+ case 16:
-+ ep_size = 1;
-+ break;
-+ case 32:
-+ ep_size = 2;
-+ break;
-+ case 64:
-+ ep_size = 3;
-+ break;
-+ case 128:
-+ ep_size = 4;
-+ break;
-+ case 256:
-+ ep_size = 5;
-+ break;
-+ case 512:
-+ ep_size = 6;
-+ break;
-+ default:
-+ UDCDBGA ("ep 0x%02x has bad packet size %d",
-+ ep_addr, packet_size);
-+ packet_size = 0;
-+ ep_size = 0;
-+ break;
-+ }
-+
-+ switch (attributes & USB_ENDPOINT_XFERTYPE_MASK) {
-+ case USB_ENDPOINT_XFER_CONTROL:
-+ case USB_ENDPOINT_XFER_BULK:
-+ case USB_ENDPOINT_XFER_INT:
-+ default:
-+ /* A non-isochronous endpoint may optionally be
-+ * double-buffered. For now we disable
-+ * double-buffering.
-+ */
-+ ep_doublebuffer = 0;
-+ ep_isoc = 0;
-+ if (packet_size > 64)
-+ packet_size = 0;
-+ if (!ep || !ep_doublebuffer)
-+ buffer_size = packet_size;
-+ else
-+ buffer_size = packet_size * 2;
-+ break;
-+ case USB_ENDPOINT_XFER_ISOC:
-+ /* Isochronous endpoints are always double-
-+ * buffered, but the double-buffering bit
-+ * in the endpoint configuration register
-+ * becomes the msb of the endpoint size so we
-+ * set the double-buffering flag to zero.
-+ */
-+ ep_doublebuffer = 0;
-+ ep_isoc = 1;
-+ buffer_size = packet_size * 2;
-+ break;
-+ }
-+
-+ /* check to see if our packet buffer RAM is exhausted */
-+ if ((ep_ptr + buffer_size) > 2048) {
-+ UDCDBGA ("out of packet RAM for ep 0x%02x buf size %d", ep_addr, buffer_size);
-+ buffer_size = packet_size = 0;
-+ }
-+
-+ /* force a default configuration for endpoint 0 since it is
-+ * always enabled
-+ */
-+ if (!ep && ((packet_size < 8) || (packet_size > 64))) {
-+ buffer_size = packet_size = 64;
-+ ep_size = 3;
-+ }
-+
-+ if (!ep) {
-+ /* configure endpoint 0 */
-+ outw ((ep_size << 12) | (ep_ptr >> 3), UDC_EP0);
-+ /*UDCDBGA("ep 0 buffer offset 0x%03x packet size 0x%03x", */
-+ /* ep_ptr, packet_size); */
-+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
-+ /* IN endpoint */
-+ if (packet_size) {
-+ outw ((1 << 15) | (ep_doublebuffer << 14) |
-+ (ep_size << 12) | (ep_isoc << 11) |
-+ (ep_ptr >> 3),
-+ UDC_EP_TX (ep_addr &
-+ USB_ENDPOINT_NUMBER_MASK));
-+ UDCDBGA ("IN ep %d buffer offset 0x%03x"
-+ " packet size 0x%03x",
-+ ep_addr & USB_ENDPOINT_NUMBER_MASK,
-+ ep_ptr, packet_size);
-+ } else {
-+ outw (0,
-+ UDC_EP_TX (ep_addr &
-+ USB_ENDPOINT_NUMBER_MASK));
-+ }
-+ } else {
-+ /* OUT endpoint */
-+ if (packet_size) {
-+ outw ((1 << 15) | (ep_doublebuffer << 14) |
-+ (ep_size << 12) | (ep_isoc << 11) |
-+ (ep_ptr >> 3),
-+ UDC_EP_RX (ep_addr &
-+ USB_ENDPOINT_NUMBER_MASK));
-+ UDCDBGA ("OUT ep %d buffer offset 0x%03x"
-+ " packet size 0x%03x",
-+ ep_addr & USB_ENDPOINT_NUMBER_MASK,
-+ ep_ptr, packet_size);
-+ } else {
-+ outw (0,
-+ UDC_EP_RX (ep_addr &
-+ USB_ENDPOINT_NUMBER_MASK));
-+ }
-+ }
-+ ep_ptr += buffer_size;
-+ }
-+}
-+
-+static void s3c2410_deconfigure_device (void)
-+{
-+ int epnum;
-+
-+ UDCDBG ("clear Cfg_Lock");
-+ outw (inw (UDC_SYSCON1) & ~UDC_Cfg_Lock, UDC_SYSCON1);
-+ UDCREG (UDC_SYSCON1);
-+
-+ /* deconfigure all endpoints */
-+ for (epnum = 1; epnum <= 15; epnum++) {
-+ outw (0, UDC_EP_RX (epnum));
-+ outw (0, UDC_EP_TX (epnum));
-+ }
-+}
-+
-+static void s3c2410_configure_device (struct usb_device_instance *device)
-+{
-+ u_int32_t tmp;
-+
-+ s3c2410_configure_endpoints(device);
-+
-+ /* disable EP0-4 SUBD interrupts ? */
-+ outw(0x00, S3C2410_UDC_USB_INT_EN_REG);
-+
-+ /* UPLL already configured by board-level init code */
-+
-+ /* configure USB pads to device mode */
-+ tmp = inw(S3C2410_MISCCR);
-+ tmp &= ~(S3C2410_MISCCR_USBHOST|S3C2410_MISCCR_USBSUSPND1);
-+ outw(tmp, S3C2410_MISCCR);
-+
-+ tmp = inb(S3C2410_CLKSLOW);
-+ tmp &= ~S3C2410_CLKSLOW_USB_CLK_DISABLE;
-+ outw(tmp, S3C2410_CLKSLOW);
-+
-+ /* clear interrupt registers */
-+ inb(S3C2410_UDC_EP_INT_REG);
-+ inb(S3C2410_UDC_USB_INT_REG);
-+
-+ /* enable USB interrupts for RESET and SUSPEND/RESUME */
-+ outb(S3C2410_UDC_USBINT_RESET|S3C2410_UDC_USBINT_SUSPEND,
-+ S3C2410_UDC_USB_INT_EN_REG);
-+
-+}
-+
-+/* omap1510_write_noniso_tx_fifo
-+ *
-+ * This function implements TRM Figure 14-30.
-+ *
-+ * If the endpoint has an active tx_urb, then the next packet of data from the
-+ * URB is written to the tx FIFO. The total amount of data in the urb is given
-+ * by urb->actual_length. The maximum amount of data that can be sent in any
-+ * one packet is given by endpoint->tx_packetSize. The number of data bytes
-+ * from this URB that have already been transmitted is given by endpoint->sent.
-+ * endpoint->last is updated by this routine with the number of data bytes
-+ * transmitted in this packet.
-+ *
-+ * In accordance with Figure 14-30, the EP_NUM register must already have been
-+ * written with the value to select the appropriate tx FIFO before this routine
-+ * is called.
-+ */
-+static void omap1510_write_noniso_tx_fifo (struct usb_endpoint_instance
-+ *endpoint)
-+{
-+ struct urb *urb = endpoint->tx_urb;
-+
-+ if (urb) {
-+ unsigned int last, i;
-+
-+ UDCDBGA ("urb->buffer %p, buffer_length %d, actual_length %d",
-+ urb->buffer, urb->buffer_length, urb->actual_length);
-+ if ((last =
-+ MIN (urb->actual_length - endpoint->sent,
-+ endpoint->tx_packetSize))) {
-+ u8 *cp = urb->buffer + endpoint->sent;
-+
-+ UDCDBGA ("endpoint->sent %d, tx_packetSize %d, last %d", endpoint->sent, endpoint->tx_packetSize, last);
-+
-+ if (((u32) cp & 1) == 0) { /* word aligned? */
-+ outsw (UDC_DATA, cp, last >> 1);
-+ } else { /* byte aligned. */
-+ for (i = 0; i < (last >> 1); i++) {
-+ u16 w = ((u16) cp[2 * i + 1] << 8) |
-+ (u16) cp[2 * i];
-+ outw (w, UDC_DATA);
-+ }
-+ }
-+ if (last & 1) {
-+ outb (*(cp + last - 1), UDC_DATA);
-+ }
-+ }
-+ endpoint->last = last;
-+ }
-+}
-+
-+/* omap1510_read_noniso_rx_fifo
-+ *
-+ * This function implements TRM Figure 14-28.
-+ *
-+ * If the endpoint has an active rcv_urb, then the next packet of data is read
-+ * from the rcv FIFO and written to rcv_urb->buffer at offset
-+ * rcv_urb->actual_length to append the packet data to the data from any
-+ * previous packets for this transfer. We assume that there is sufficient room
-+ * left in the buffer to hold an entire packet of data.
-+ *
-+ * The return value is the number of bytes read from the FIFO for this packet.
-+ *
-+ * In accordance with Figure 14-28, the EP_NUM register must already have been
-+ * written with the value to select the appropriate rcv FIFO before this routine
-+ * is called.
-+ */
-+static int omap1510_read_noniso_rx_fifo (struct usb_endpoint_instance
-+ *endpoint)
-+{
-+ struct urb *urb = endpoint->rcv_urb;
-+ int len = 0;
-+
-+ if (urb) {
-+ len = inw (UDC_RXFSTAT);
-+
-+ if (len) {
-+ unsigned char *cp = urb->buffer + urb->actual_length;
-+
-+ insw (UDC_DATA, cp, len >> 1);
-+ if (len & 1)
-+ *(cp + len - 1) = inb (UDC_DATA);
-+ }
-+ }
-+ return len;
-+}
-+
-+/* omap1510_prepare_for_control_write_status
-+ *
-+ * This function implements TRM Figure 14-17.
-+ *
-+ * We have to deal here with non-autodecoded control writes that haven't already
-+ * been dealt with by ep0_recv_setup. The non-autodecoded standard control
-+ * write requests are: set/clear endpoint feature, set configuration, set
-+ * interface, and set descriptor. ep0_recv_setup handles set/clear requests for
-+ * ENDPOINT_HALT by halting the endpoint for a set request and resetting the
-+ * endpoint for a clear request. ep0_recv_setup returns an error for
-+ * SET_DESCRIPTOR requests which causes them to be terminated with a stall by
-+ * the setup handler. A SET_INTERFACE request is handled by ep0_recv_setup by
-+ * generating a DEVICE_SET_INTERFACE event. This leaves only the
-+ * SET_CONFIGURATION event for us to deal with here.
-+ *
-+ */
-+static void omap1510_prepare_for_control_write_status (struct urb *urb)
-+{
-+ struct usb_device_request *request = &urb->device_request;;
-+
-+ /* check for a SET_CONFIGURATION request */
-+ if (request->bRequest == USB_REQ_SET_CONFIGURATION) {
-+ int configuration = le16_to_cpu (request->wValue) & 0xff;
-+ unsigned short devstat = inw (UDC_DEVSTAT);
-+
-+ if ((devstat & (UDC_ADD | UDC_CFG)) == UDC_ADD) {
-+ /* device is currently in ADDRESSED state */
-+ if (configuration) {
-+ /* Assume the specified non-zero configuration
-+ * value is valid and switch to the CONFIGURED
-+ * state.
-+ */
-+ outw (UDC_Dev_Cfg, UDC_SYSCON2);
-+ }
-+ } else if ((devstat & UDC_CFG) == UDC_CFG) {
-+ /* device is currently in CONFIGURED state */
-+ if (!configuration) {
-+ /* Switch to ADDRESSED state. */
-+ outw (UDC_Clr_Cfg, UDC_SYSCON2);
-+ }
-+ }
-+ }
-+
-+ /* select EP0 tx FIFO */
-+ outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM);
-+ /* clear endpoint (no data bytes in status stage) */
-+ outw (UDC_Clr_EP, UDC_CTRL);
-+ /* enable the EP0 tx FIFO */
-+ outw (UDC_Set_FIFO_En, UDC_CTRL);
-+ /* deselect the endpoint */
-+ outw (UDC_EP_Dir, UDC_EP_NUM);
-+}
-+
-+/* udc_state_transition_up
-+ * udc_state_transition_down
-+ *
-+ * Helper functions to implement device state changes. The device states and
-+ * the events that transition between them are:
-+ *
-+ * STATE_ATTACHED
-+ * || /\
-+ * \/ ||
-+ * DEVICE_HUB_CONFIGURED DEVICE_HUB_RESET
-+ * || /\
-+ * \/ ||
-+ * STATE_POWERED
-+ * || /\
-+ * \/ ||
-+ * DEVICE_RESET DEVICE_POWER_INTERRUPTION
-+ * || /\
-+ * \/ ||
-+ * STATE_DEFAULT
-+ * || /\
-+ * \/ ||
-+ * DEVICE_ADDRESS_ASSIGNED DEVICE_RESET
-+ * || /\
-+ * \/ ||
-+ * STATE_ADDRESSED
-+ * || /\
-+ * \/ ||
-+ * DEVICE_CONFIGURED DEVICE_DE_CONFIGURED
-+ * || /\
-+ * \/ ||
-+ * STATE_CONFIGURED
-+ *
-+ * udc_state_transition_up transitions up (in the direction from STATE_ATTACHED
-+ * to STATE_CONFIGURED) from the specified initial state to the specified final
-+ * state, passing through each intermediate state on the way. If the initial
-+ * state is at or above (i.e. nearer to STATE_CONFIGURED) the final state, then
-+ * no state transitions will take place.
-+ *
-+ * udc_state_transition_down transitions down (in the direction from
-+ * STATE_CONFIGURED to STATE_ATTACHED) from the specified initial state to the
-+ * specified final state, passing through each intermediate state on the way.
-+ * If the initial state is at or below (i.e. nearer to STATE_ATTACHED) the final
-+ * state, then no state transitions will take place.
-+ *
-+ * These functions must only be called with interrupts disabled.
-+ */
-+static void udc_state_transition_up (usb_device_state_t initial,
-+ usb_device_state_t final)
-+{
-+ if (initial < final) {
-+ switch (initial) {
-+ case STATE_ATTACHED:
-+ usbd_device_event_irq (udc_device,
-+ DEVICE_HUB_CONFIGURED, 0);
-+ if (final == STATE_POWERED)
-+ break;
-+ case STATE_POWERED:
-+ usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
-+ if (final == STATE_DEFAULT)
-+ break;
-+ case STATE_DEFAULT:
-+ usbd_device_event_irq (udc_device,
-+ DEVICE_ADDRESS_ASSIGNED, 0);
-+ if (final == STATE_ADDRESSED)
-+ break;
-+ case STATE_ADDRESSED:
-+ usbd_device_event_irq (udc_device, DEVICE_CONFIGURED,
-+ 0);
-+ case STATE_CONFIGURED:
-+ break;
-+ default:
-+ break;
-+ }
-+ }
-+}
-+
-+static void udc_state_transition_down (usb_device_state_t initial,
-+ usb_device_state_t final)
-+{
-+ if (initial > final) {
-+ switch (initial) {
-+ case STATE_CONFIGURED:
-+ usbd_device_event_irq (udc_device, DEVICE_DE_CONFIGURED, 0);
-+ if (final == STATE_ADDRESSED)
-+ break;
-+ case STATE_ADDRESSED:
-+ usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
-+ if (final == STATE_DEFAULT)
-+ break;
-+ case STATE_DEFAULT:
-+ usbd_device_event_irq (udc_device, DEVICE_POWER_INTERRUPTION, 0);
-+ if (final == STATE_POWERED)
-+ break;
-+ case STATE_POWERED:
-+ usbd_device_event_irq (udc_device, DEVICE_HUB_RESET, 0);
-+ case STATE_ATTACHED:
-+ break;
-+ default:
-+ break;
-+ }
-+ }
-+}
-+
-+/* Handle all device state changes.
-+ * This function implements TRM Figure 14-21.
-+ */
-+static void omap1510_udc_state_changed (void)
-+{
-+ u16 bits;
-+ u16 devstat = inw (UDC_DEVSTAT);
-+
-+ UDCDBGA ("state changed, devstat %x, old %x", devstat, udc_devstat);
-+
-+ bits = devstat ^ udc_devstat;
-+ if (bits) {
-+ if (bits & UDC_ATT) {
-+ if (devstat & UDC_ATT) {
-+ UDCDBG ("device attached and powered");
-+ udc_state_transition_up (udc_device->device_state, STATE_POWERED);
-+ } else {
-+ UDCDBG ("device detached or unpowered");
-+ udc_state_transition_down (udc_device->device_state, STATE_ATTACHED);
-+ }
-+ }
-+ if (bits & UDC_USB_Reset) {
-+ if (devstat & UDC_USB_Reset) {
-+ UDCDBG ("device reset in progess");
-+ udc_state_transition_down (udc_device->device_state, STATE_POWERED);
-+ } else {
-+ UDCDBG ("device reset completed");
-+ }
-+ }
-+ if (bits & UDC_DEF) {
-+ if (devstat & UDC_DEF) {
-+ UDCDBG ("device entering default state");
-+ udc_state_transition_up (udc_device->device_state, STATE_DEFAULT);
-+ } else {
-+ UDCDBG ("device leaving default state");
-+ udc_state_transition_down (udc_device->device_state, STATE_POWERED);
-+ }
-+ }
-+ if (bits & UDC_SUS) {
-+ if (devstat & UDC_SUS) {
-+ UDCDBG ("entering suspended state");
-+ usbd_device_event_irq (udc_device, DEVICE_BUS_INACTIVE, 0);
-+ } else {
-+ UDCDBG ("leaving suspended state");
-+ usbd_device_event_irq (udc_device, DEVICE_BUS_ACTIVITY, 0);
-+ }
-+ }
-+ if (bits & UDC_R_WK_OK) {
-+ UDCDBGA ("remote wakeup %s", (devstat & UDC_R_WK_OK)
-+ ? "enabled" : "disabled");
-+ }
-+ if (bits & UDC_ADD) {
-+ if (devstat & UDC_ADD) {
-+ UDCDBG ("default -> addressed");
-+ udc_state_transition_up (udc_device->device_state, STATE_ADDRESSED);
-+ } else {
-+ UDCDBG ("addressed -> default");
-+ udc_state_transition_down (udc_device->device_state, STATE_DEFAULT);
-+ }
-+ }
-+ if (bits & UDC_CFG) {
-+ if (devstat & UDC_CFG) {
-+ UDCDBG ("device configured");
-+ /* The ep0_recv_setup function generates the
-+ * DEVICE_CONFIGURED event when a
-+ * USB_REQ_SET_CONFIGURATION setup packet is
-+ * received, so we should already be in the
-+ * state STATE_CONFIGURED.
-+ */
-+ udc_state_transition_up (udc_device->device_state, STATE_CONFIGURED);
-+ } else {
-+ UDCDBG ("device deconfigured");
-+ udc_state_transition_down (udc_device->device_state, STATE_ADDRESSED);
-+ }
-+ }
-+ }
-+
-+ /* Clear interrupt source */
-+ outw (UDC_DS_Chg, UDC_IRQ_SRC);
-+
-+ /* Save current DEVSTAT */
-+ udc_devstat = devstat;
-+}
-+
-+static void s3c2410_udc_ep0(void)
-+{
-+ u_int8_t ep0csr;
-+
-+ UDCDBG("-> Entering EP0 handler");
-+
-+ S3C2410_UDC_SETIX(EP0);
-+ ep0csr = inb(S3C2410_UDC_IN_CSR1_REG);
-+
-+ /* clear stall status */
-+ if (ep0csr & S3C2410_UDC_EP0_CSR_SENTSTL) {
-+ clear_sp0_sst;
-+ /* FIXME */
-+ ep0_idle();
-+ }
-+
-+ if (ep0csr & S3C2410_UDC_EP0_CSR_SE
-+ && dev->ep0state != EP0_IDLE) {
-+ clear_ep0_se;
-+ ep0_idle();
-+ }
-+
-+ switch (dev->ep0state) {
-+ case EP0_IDLE:
-+ if (ep0crs & S3C2410_UDC_EP0_CSR_OPKRDY) {
-+ }
-+ break;
-+ case EP0_IN_DATA_PHASE:
-+ break;
-+ case EP0_OUT_DATA_PHASE:
-+ break;
-+ case EP0_END_XFER:
-+ break;
-+ case EP0_STALL:
-+ set_ep0_ss;
-+ break;
-+ }
-+}
-+
-+
-+}
-+
-+/* Handle SETUP USB interrupt.
-+ * This function implements TRM Figure 14-14.
-+ */
-+static void omap1510_udc_setup (struct usb_endpoint_instance *endpoint)
-+{
-+ UDCDBG ("-> Entering device setup");
-+
-+ do {
-+ const int setup_pktsize = 8;
-+ unsigned char *datap =
-+ (unsigned char *) &ep0_urb->device_request;
-+
-+ /* Gain access to EP 0 setup FIFO */
-+ outw (UDC_Setup_Sel, UDC_EP_NUM);
-+
-+ /* Read control request data */
-+ insb (UDC_DATA, datap, setup_pktsize);
-+
-+ UDCDBGA ("EP0 setup read [%x %x %x %x %x %x %x %x]",
-+ *(datap + 0), *(datap + 1), *(datap + 2),
-+ *(datap + 3), *(datap + 4), *(datap + 5),
-+ *(datap + 6), *(datap + 7));
-+
-+ /* Reset EP0 setup FIFO */
-+ outw (0, UDC_EP_NUM);
-+ } while (inw (UDC_IRQ_SRC) & UDC_Setup);
-+
-+ /* Try to process setup packet */
-+ if (ep0_recv_setup (ep0_urb)) {
-+ /* Not a setup packet, stall next EP0 transaction */
-+ udc_stall_ep (0);
-+ UDCDBG ("can't parse setup packet, still waiting for setup");
-+ return;
-+ }
-+
-+ /* Check direction */
-+ if ((ep0_urb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK)
-+ == USB_REQ_HOST2DEVICE) {
-+ UDCDBG ("control write on EP0");
-+ if (le16_to_cpu (ep0_urb->device_request.wLength)) {
-+ /* We don't support control write data stages.
-+ * The only standard control write request with a data
-+ * stage is SET_DESCRIPTOR, and ep0_recv_setup doesn't
-+ * support that so we just stall those requests. A
-+ * function driver might support a non-standard
-+ * write request with a data stage, but it isn't
-+ * obvious what we would do with the data if we read it
-+ * so we'll just stall it. It seems like the API isn't
-+ * quite right here.
-+ */
-+#if 0
-+ /* Here is what we would do if we did support control
-+ * write data stages.
-+ */
-+ ep0_urb->actual_length = 0;
-+ outw (0, UDC_EP_NUM);
-+ /* enable the EP0 rx FIFO */
-+ outw (UDC_Set_FIFO_En, UDC_CTRL);
-+#else
-+ /* Stall this request */
-+ UDCDBG ("Stalling unsupported EP0 control write data "
-+ "stage.");
-+ udc_stall_ep (0);
-+#endif
-+ } else {
-+ omap1510_prepare_for_control_write_status (ep0_urb);
-+ }
-+ } else {
-+ UDCDBG ("control read on EP0");
-+ /* The ep0_recv_setup function has already placed our response
-+ * packet data in ep0_urb->buffer and the packet length in
-+ * ep0_urb->actual_length.
-+ */
-+ endpoint->tx_urb = ep0_urb;
-+ endpoint->sent = 0;
-+ /* select the EP0 tx FIFO */
-+ outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM);
-+ /* Write packet data to the FIFO. omap1510_write_noniso_tx_fifo
-+ * will update endpoint->last with the number of bytes written
-+ * to the FIFO.
-+ */
-+ omap1510_write_noniso_tx_fifo (endpoint);
-+ /* enable the FIFO to start the packet transmission */
-+ outw (UDC_Set_FIFO_En, UDC_CTRL);
-+ /* deselect the EP0 tx FIFO */
-+ outw (UDC_EP_Dir, UDC_EP_NUM);
-+ }
-+
-+ UDCDBG ("<- Leaving device setup");
-+}
-+
-+/* Handle endpoint 0 RX interrupt
-+ * This routine implements TRM Figure 14-16.
-+ */
-+static void omap1510_udc_ep0_rx (struct usb_endpoint_instance *endpoint)
-+{
-+ unsigned short status;
-+
-+ UDCDBG ("RX on EP0");
-+ /* select EP0 rx FIFO */
-+ outw (UDC_EP_Sel, UDC_EP_NUM);
-+
-+ status = inw (UDC_STAT_FLG);
-+
-+ if (status & UDC_ACK) {
-+ /* Check direction */
-+ if ((ep0_urb->device_request.bmRequestType
-+ & USB_REQ_DIRECTION_MASK) == USB_REQ_HOST2DEVICE) {
-+ /* This rx interrupt must be for a control write data
-+ * stage packet.
-+ *
-+ * We don't support control write data stages.
-+ * We should never end up here.
-+ */
-+
-+ /* clear the EP0 rx FIFO */
-+ outw (UDC_Clr_EP, UDC_CTRL);
-+
-+ /* deselect the EP0 rx FIFO */
-+ outw (0, UDC_EP_NUM);
-+
-+ UDCDBG ("Stalling unexpected EP0 control write "
-+ "data stage packet");
-+ udc_stall_ep (0);
-+ } else {
-+ /* This rx interrupt must be for a control read status
-+ * stage packet.
-+ */
-+ UDCDBG ("ACK on EP0 control read status stage packet");
-+ /* deselect EP0 rx FIFO */
-+ outw (0, UDC_EP_NUM);
-+ }
-+ } else if (status & UDC_STALL) {
-+ UDCDBG ("EP0 stall during RX");
-+ /* deselect EP0 rx FIFO */
-+ outw (0, UDC_EP_NUM);
-+ } else {
-+ /* deselect EP0 rx FIFO */
-+ outw (0, UDC_EP_NUM);
-+ }
-+}
-+
-+/* Handle endpoint 0 TX interrupt
-+ * This routine implements TRM Figure 14-18.
-+ */
-+static void omap1510_udc_ep0_tx (struct usb_endpoint_instance *endpoint)
-+{
-+ unsigned short status;
-+ struct usb_device_request *request = &ep0_urb->device_request;
-+
-+ UDCDBG ("TX on EP0");
-+ /* select EP0 TX FIFO */
-+ outw (UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM);
-+
-+ status = inw (UDC_STAT_FLG);
-+ if (status & UDC_ACK) {
-+ /* Check direction */
-+ if ((request->bmRequestType & USB_REQ_DIRECTION_MASK) ==
-+ USB_REQ_HOST2DEVICE) {
-+ /* This tx interrupt must be for a control write status
-+ * stage packet.
-+ */
-+ UDCDBG ("ACK on EP0 control write status stage packet");
-+ /* deselect EP0 TX FIFO */
-+ outw (UDC_EP_Dir, UDC_EP_NUM);
-+ } else {
-+ /* This tx interrupt must be for a control read data
-+ * stage packet.
-+ */
-+ int wLength = le16_to_cpu (request->wLength);
-+
-+ /* Update our count of bytes sent so far in this
-+ * transfer.
-+ */
-+ endpoint->sent += endpoint->last;
-+
-+ /* We are finished with this transfer if we have sent
-+ * all of the bytes in our tx urb (urb->actual_length)
-+ * unless we need a zero-length terminating packet. We
-+ * need a zero-length terminating packet if we returned
-+ * fewer bytes than were requested (wLength) by the host,
-+ * and the number of bytes we returned is an exact
-+ * multiple of the packet size endpoint->tx_packetSize.
-+ */
-+ if ((endpoint->sent == ep0_urb->actual_length)
-+ && ((ep0_urb->actual_length == wLength)
-+ || (endpoint->last !=
-+ endpoint->tx_packetSize))) {
-+ /* Done with control read data stage. */
-+ UDCDBG ("control read data stage complete");
-+ /* deselect EP0 TX FIFO */
-+ outw (UDC_EP_Dir, UDC_EP_NUM);
-+ /* select EP0 RX FIFO to prepare for control
-+ * read status stage.
-+ */
-+ outw (UDC_EP_Sel, UDC_EP_NUM);
-+ /* clear the EP0 RX FIFO */
-+ outw (UDC_Clr_EP, UDC_CTRL);
-+ /* enable the EP0 RX FIFO */
-+ outw (UDC_Set_FIFO_En, UDC_CTRL);
-+ /* deselect the EP0 RX FIFO */
-+ outw (0, UDC_EP_NUM);
-+ } else {
-+ /* We still have another packet of data to send
-+ * in this control read data stage or else we
-+ * need a zero-length terminating packet.
-+ */
-+ UDCDBG ("ACK control read data stage packet");
-+ omap1510_write_noniso_tx_fifo (endpoint);
-+ /* enable the EP0 tx FIFO to start transmission */
-+ outw (UDC_Set_FIFO_En, UDC_CTRL);
-+ /* deselect EP0 TX FIFO */
-+ outw (UDC_EP_Dir, UDC_EP_NUM);
-+ }
-+ }
-+ } else if (status & UDC_STALL) {
-+ UDCDBG ("EP0 stall during TX");
-+ /* deselect EP0 TX FIFO */
-+ outw (UDC_EP_Dir, UDC_EP_NUM);
-+ } else {
-+ /* deselect EP0 TX FIFO */
-+ outw (UDC_EP_Dir, UDC_EP_NUM);
-+ }
-+}
-+
-+/* Handle RX transaction on non-ISO endpoint.
-+ * This function implements TRM Figure 14-27.
-+ * The ep argument is a physical endpoint number for a non-ISO OUT endpoint
-+ * in the range 1 to 15.
-+ */
-+static void omap1510_udc_epn_rx (int ep)
-+{
-+ unsigned short status;
-+
-+ /* Check endpoint status */
-+ status = inw (UDC_STAT_FLG);
-+
-+ if (status & UDC_ACK) {
-+ int nbytes;
-+ struct usb_endpoint_instance *endpoint =
-+ omap1510_find_ep (ep);
-+
-+ nbytes = omap1510_read_noniso_rx_fifo (endpoint);
-+ usbd_rcv_complete (endpoint, nbytes, 0);
-+
-+ /* enable rx FIFO to prepare for next packet */
-+ outw (UDC_Set_FIFO_En, UDC_CTRL);
-+ } else if (status & UDC_STALL) {
-+ UDCDBGA ("STALL on RX endpoint %d", ep);
-+ } else if (status & UDC_NAK) {
-+ UDCDBGA ("NAK on RX ep %d", ep);
-+ } else {
-+ serial_printf ("omap-bi: RX on ep %d with status %x", ep,
-+ status);
-+ }
-+}
-+
-+/* Handle TX transaction on non-ISO endpoint.
-+ * This function implements TRM Figure 14-29.
-+ * The ep argument is a physical endpoint number for a non-ISO IN endpoint
-+ * in the range 16 to 30.
-+ */
-+static void omap1510_udc_epn_tx (int ep)
-+{
-+ unsigned short status;
-+
-+ /*serial_printf("omap1510_udc_epn_tx( %x )\n",ep); */
-+
-+ /* Check endpoint status */
-+ status = inw (UDC_STAT_FLG);
-+
-+ if (status & UDC_ACK) {
-+ struct usb_endpoint_instance *endpoint =
-+ omap1510_find_ep (ep);
-+
-+ /* We need to transmit a terminating zero-length packet now if
-+ * we have sent all of the data in this URB and the transfer
-+ * size was an exact multiple of the packet size.
-+ */
-+ if (endpoint->tx_urb
-+ && (endpoint->last == endpoint->tx_packetSize)
-+ && (endpoint->tx_urb->actual_length - endpoint->sent -
-+ endpoint->last == 0)) {
-+ /* Prepare to transmit a zero-length packet. */
-+ endpoint->sent += endpoint->last;
-+ /* write 0 bytes of data to FIFO */
-+ omap1510_write_noniso_tx_fifo (endpoint);
-+ /* enable tx FIFO to start transmission */
-+ outw (UDC_Set_FIFO_En, UDC_CTRL);
-+ } else if (endpoint->tx_urb
-+ && endpoint->tx_urb->actual_length) {
-+ /* retire the data that was just sent */
-+ usbd_tx_complete (endpoint);
-+ /* Check to see if we have more data ready to transmit
-+ * now.
-+ */
-+ if (endpoint->tx_urb
-+ && endpoint->tx_urb->actual_length) {
-+ /* write data to FIFO */
-+ omap1510_write_noniso_tx_fifo (endpoint);
-+ /* enable tx FIFO to start transmission */
-+ outw (UDC_Set_FIFO_En, UDC_CTRL);
-+ }
-+ }
-+ } else if (status & UDC_STALL) {
-+ UDCDBGA ("STALL on TX endpoint %d", ep);
-+ } else if (status & UDC_NAK) {
-+ UDCDBGA ("NAK on TX endpoint %d", ep);
-+ } else {
-+ /*serial_printf("omap-bi: TX on ep %d with status %x\n", ep, status); */
-+ }
-+}
-+
-+
-+/*
-+-------------------------------------------------------------------------------
-+*/
-+
-+/* Handle general USB interrupts and dispatch according to type.
-+ * This function implements TRM Figure 14-13.
-+ */
-+void s3c2410_udc_irq (void)
-+{
-+ u_int8_t save_idx = inb(S3C2410_UDC_INDEX_REG);
-+ u_int8_t usb_status = inb(S3C2410_UDC_USB_INT_REG);
-+ u_int8_t usbd_status = inb(S3C2410_UDC_EP_INT_REG);
-+
-+ UDCDBGA("< IRQ usbs=0x%02x, usbds=0x%02x start >", usb_status,
-+ usbd_status);
-+
-+ if (usb_status & S3C2410_UDC_USBINT_RESET) {
-+ valid_irq++;
-+ }
-+
-+ if (usb_status & S3C2410_UDC_USBINT_RESUME) {
-+ valid_irq++;
-+
-+ }
-+
-+ if (usb_status & S3C2410_UDC_USBINT_SUSPEND) {
-+ valid_irq++;
-+
-+ }
-+
-+ /* Endpoint Interrupts */
-+ if (usbd_status) {
-+ int i;
-+
-+ if (usbd_status & S3C2410_UDC_INT_EP0) {
-+ s3c2410_udc_ep0();
-+ outb(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_REG);
-+ valid_irq++;
-+ }
-+
-+ for (i = 1; i < 5; i++) {
-+ u_int32_t tmp = 1 << i;
-+
-+ if (usbd_status & tmp) {
-+ /* FIXME: Handle EP X */
-+ s3c2410_udc_epn(i);
-+ outb(tmp, S3C2410_UDC_EP_INT_REG);
-+ valid_irq++;
-+ }
-+ }
-+ }
-+ outb(save_idx, S3C2410_UDC_INDEX_REG);
-+
-+#if 0
-+ if (!(irq_src & ~UDC_SOF_Flg)) /* ignore SOF interrupts ) */
-+ return;
-+
-+ UDCDBGA ("< IRQ #%d start >- %x", udc_interrupts, irq_src);
-+ /*serial_printf("< IRQ #%d start >- %x\n", udc_interrupts, irq_src); */
-+
-+ if (irq_src & UDC_DS_Chg) {
-+ /* Device status changed */
-+ omap1510_udc_state_changed ();
-+ valid_irq++;
-+ }
-+ if (irq_src & UDC_EP0_RX) {
-+ /* Endpoint 0 receive */
-+ outw (UDC_EP0_RX, UDC_IRQ_SRC); /* ack interrupt */
-+ omap1510_udc_ep0_rx (udc_device->bus->endpoint_array + 0);
-+ valid_irq++;
-+ }
-+ if (irq_src & UDC_EP0_TX) {
-+ /* Endpoint 0 transmit */
-+ outw (UDC_EP0_TX, UDC_IRQ_SRC); /* ack interrupt */
-+ omap1510_udc_ep0_tx (udc_device->bus->endpoint_array + 0);
-+ valid_irq++;
-+ }
-+ if (irq_src & UDC_Setup) {
-+ /* Device setup */
-+ omap1510_udc_setup (udc_device->bus->endpoint_array + 0);
-+ valid_irq++;
-+ }
-+ /*if (!valid_irq) */
-+ /* serial_printf("unknown interrupt, IRQ_SRC %.4x\n", irq_src); */
-+#endif
-+ UDCDBGA ("< IRQ end >", udc_interrupts);
-+
-+ udc_interrupts++;
-+}
-+
-+/* This function implements TRM Figure 14-26. */
-+void omap1510_udc_noniso_irq (void)
-+{
-+ unsigned short epnum;
-+ unsigned short irq_src = inw (UDC_IRQ_SRC);
-+ int valid_irq = 0;
-+
-+ if (!(irq_src & (UDC_EPn_RX | UDC_EPn_TX)))
-+ return;
-+
-+ UDCDBGA ("non-ISO IRQ, IRQ_SRC %x", inw (UDC_IRQ_SRC));
-+
-+ if (irq_src & UDC_EPn_RX) { /* Endpoint N OUT transaction */
-+ /* Determine the endpoint number for this interrupt */
-+ epnum = (inw (UDC_EPN_STAT) & 0x0f00) >> 8;
-+ UDCDBGA ("RX on ep %x", epnum);
-+
-+ /* acknowledge interrupt */
-+ outw (UDC_EPn_RX, UDC_IRQ_SRC);
-+
-+ if (epnum) {
-+ /* select the endpoint FIFO */
-+ outw (UDC_EP_Sel | epnum, UDC_EP_NUM);
-+
-+ omap1510_udc_epn_rx (epnum);
-+
-+ /* deselect the endpoint FIFO */
-+ outw (epnum, UDC_EP_NUM);
-+ }
-+ valid_irq++;
-+ }
-+ if (irq_src & UDC_EPn_TX) { /* Endpoint N IN transaction */
-+ /* Determine the endpoint number for this interrupt */
-+ epnum = (inw (UDC_EPN_STAT) & 0x000f) | USB_DIR_IN;
-+ UDCDBGA ("TX on ep %x", epnum);
-+
-+ /* acknowledge interrupt */
-+ outw (UDC_EPn_TX, UDC_IRQ_SRC);
-+
-+ if (epnum) {
-+ /* select the endpoint FIFO */
-+ outw (UDC_EP_Sel | UDC_EP_Dir | epnum, UDC_EP_NUM);
-+
-+ omap1510_udc_epn_tx (epnum);
-+
-+ /* deselect the endpoint FIFO */
-+ outw (UDC_EP_Dir | epnum, UDC_EP_NUM);
-+ }
-+ valid_irq++;
-+ }
-+ if (!valid_irq)
-+ serial_printf (": unknown non-ISO interrupt, IRQ_SRC %.4x\n",
-+ irq_src);
-+}
-+
-+/*
-+-------------------------------------------------------------------------------
-+*/
-+
-+
-+/*
-+ * Start of public functions.
-+ */
-+
-+/* Called to start packet transmission. */
-+void udc_endpoint_write (struct usb_endpoint_instance *endpoint)
-+{
-+ unsigned short epnum =
-+ endpoint->endpoint_address & USB_ENDPOINT_NUMBER_MASK;
-+
-+ UDCDBGA ("Starting transmit on ep %x", epnum);
-+
-+ if (endpoint->tx_urb) {
-+ /* select the endpoint FIFO */
-+ outw (UDC_EP_Sel | UDC_EP_Dir | epnum, UDC_EP_NUM);
-+ /* write data to FIFO */
-+ omap1510_write_noniso_tx_fifo (endpoint);
-+ /* enable tx FIFO to start transmission */
-+ outw (UDC_Set_FIFO_En, UDC_CTRL);
-+ /* deselect the endpoint FIFO */
-+ outw (UDC_EP_Dir | epnum, UDC_EP_NUM);
-+ }
-+}
-+
-+/* Start to initialize h/w stuff */
-+int udc_init (void)
-+{
-+ u16 udc_rev;
-+ uchar value;
-+ ulong gpio;
-+ int i;
-+
-+ /* Let the device settle down before we start */
-+ for (i = 0; i < UDC_INIT_MDELAY; i++) udelay(1000);
-+
-+ udc_device = NULL;
-+
-+ UDCDBG ("starting");
-+
-+ /* Check peripheral reset. Must be 1 to make sure
-+ MPU TIPB peripheral reset is inactive */
-+ UDCREG (ARM_RSTCT2);
-+
-+ /* Set and check clock control.
-+ * We might ought to be using the clock control API to do
-+ * this instead of fiddling with the clock registers directly
-+ * here.
-+ */
-+ outw ((1 << 4) | (1 << 5), CLOCK_CTRL);
-+ UDCREG (CLOCK_CTRL);
-+ /* Set and check APLL */
-+ outw (0x0008, APLL_CTRL);
-+ UDCREG (APLL_CTRL);
-+ /* Set and check DPLL */
-+ outw (0x2210, DPLL_CTRL);
-+ UDCREG (DPLL_CTRL);
-+ /* Set and check SOFT */
-+ outw ((1 << 4) | (1 << 3) | 1, SOFT_REQ);
-+ /* Short delay to wait for DPLL */
-+ udelay (1000);
-+
-+ /* Print banner with device revision */
-+ udc_rev = inw (UDC_REV) & 0xff;
-+ printf ("USB: TI OMAP1510 USB function module rev %d.%d\n",
-+ udc_rev >> 4, udc_rev & 0xf);
-+
-+#ifdef CONFIG_OMAP_SX1
-+ i2c_read (0x32, 0x04, 1, &value, 1);
-+ value |= 0x04;
-+ i2c_write (0x32, 0x04, 1, &value, 1);
-+
-+ i2c_read (0x32, 0x03, 1, &value, 1);
-+ value |= 0x01;
-+ i2c_write (0x32, 0x03, 1, &value, 1);
-+
-+ gpio = inl(GPIO_PIN_CONTROL_REG);
-+ gpio |= 0x0002; /* A_IRDA_OFF */
-+ gpio |= 0x0800; /* A_SWITCH */
-+ gpio |= 0x8000; /* A_USB_ON */
-+ outl (gpio, GPIO_PIN_CONTROL_REG);
-+
-+ gpio = inl(GPIO_DIR_CONTROL_REG);
-+ gpio &= ~0x0002; /* A_IRDA_OFF */
-+ gpio &= ~0x0800; /* A_SWITCH */
-+ gpio &= ~0x8000; /* A_USB_ON */
-+ outl (gpio, GPIO_DIR_CONTROL_REG);
-+
-+ gpio = inl(GPIO_DATA_OUTPUT_REG);
-+ gpio |= 0x0002; /* A_IRDA_OFF */
-+ gpio &= ~0x0800; /* A_SWITCH */
-+ gpio &= ~0x8000; /* A_USB_ON */
-+ outl (gpio, GPIO_DATA_OUTPUT_REG);
-+#endif
-+
-+ /* The VBUS_MODE bit selects whether VBUS detection is done via
-+ * software (1) or hardware (0). When software detection is
-+ * selected, VBUS_CTRL selects whether USB is not connected (0)
-+ * or connected (1).
-+ */
-+ outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_MODE, FUNC_MUX_CTRL_0);
-+ outl (inl (FUNC_MUX_CTRL_0) & ~UDC_VBUS_CTRL, FUNC_MUX_CTRL_0);
-+ UDCREGL (FUNC_MUX_CTRL_0);
-+
-+ /*
-+ * At this point, device is ready for configuration...
-+ */
-+
-+ UDCDBG ("disable USB interrupts");
-+ outw (0, UDC_IRQ_EN);
-+ UDCREG (UDC_IRQ_EN);
-+
-+ UDCDBG ("disable USB DMA");
-+ outw (0, UDC_DMA_IRQ_EN);
-+ UDCREG (UDC_DMA_IRQ_EN);
-+
-+ UDCDBG ("initialize SYSCON1");
-+ outw (UDC_Self_Pwr | UDC_Pullup_En, UDC_SYSCON1);
-+ UDCREG (UDC_SYSCON1);
-+
-+ return 0;
-+}
-+
-+/* Stall endpoint */
-+static void udc_stall_ep (unsigned int ep_addr)
-+{
-+ /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */
-+ int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
-+
-+ UDCDBGA ("stall ep_addr %d", ep_addr);
-+
-+ /* REVISIT?
-+ * The OMAP TRM section 14.2.4.2 says we must check that the FIFO
-+ * is empty before halting the endpoint. The current implementation
-+ * doesn't check that the FIFO is empty.
-+ */
-+
-+ if (!ep_num) {
-+ outw (UDC_Stall_Cmd, UDC_SYSCON2);
-+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) {
-+ if (inw (UDC_EP_RX (ep_num)) & UDC_EPn_RX_Valid) {
-+ /* we have a valid rx endpoint, so halt it */
-+ outw (UDC_EP_Sel | ep_num, UDC_EP_NUM);
-+ outw (UDC_Set_Halt, UDC_CTRL);
-+ outw (ep_num, UDC_EP_NUM);
-+ }
-+ } else {
-+ if (inw (UDC_EP_TX (ep_num)) & UDC_EPn_TX_Valid) {
-+ /* we have a valid tx endpoint, so halt it */
-+ outw (UDC_EP_Sel | UDC_EP_Dir | ep_num, UDC_EP_NUM);
-+ outw (UDC_Set_Halt, UDC_CTRL);
-+ outw (ep_num, UDC_EP_NUM);
-+ }
-+ }
-+}
-+
-+/* Reset endpoint */
-+#if 0
-+static void udc_reset_ep (unsigned int ep_addr)
-+{
-+ /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */
-+ int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
-+
-+ UDCDBGA ("reset ep_addr %d", ep_addr);
-+
-+ if (!ep_num) {
-+ /* control endpoint 0 can't be reset */
-+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) {
-+ UDCDBGA ("UDC_EP_RX(%d) = 0x%04x", ep_num,
-+ inw (UDC_EP_RX (ep_num)));
-+ if (inw (UDC_EP_RX (ep_num)) & UDC_EPn_RX_Valid) {
-+ /* we have a valid rx endpoint, so reset it */
-+ outw (ep_num | UDC_EP_Sel, UDC_EP_NUM);
-+ outw (UDC_Reset_EP, UDC_CTRL);
-+ outw (ep_num, UDC_EP_NUM);
-+ UDCDBGA ("OUT endpoint %d reset", ep_num);
-+ }
-+ } else {
-+ UDCDBGA ("UDC_EP_TX(%d) = 0x%04x", ep_num,
-+ inw (UDC_EP_TX (ep_num)));
-+ /* Resetting of tx endpoints seems to be causing the USB function
-+ * module to fail, which causes problems when the driver is
-+ * uninstalled. We'll skip resetting tx endpoints for now until
-+ * we figure out what the problem is.
-+ */
-+#if 0
-+ if (inw (UDC_EP_TX (ep_num)) & UDC_EPn_TX_Valid) {
-+ /* we have a valid tx endpoint, so reset it */
-+ outw (ep_num | UDC_EP_Dir | UDC_EP_Sel, UDC_EP_NUM);
-+ outw (UDC_Reset_EP, UDC_CTRL);
-+ outw (ep_num | UDC_EP_Dir, UDC_EP_NUM);
-+ UDCDBGA ("IN endpoint %d reset", ep_num);
-+ }
-+#endif
-+ }
-+}
-+#endif
-+
-+/* ************************************************************************** */
-+
-+/**
-+ * udc_check_ep - check logical endpoint
-+ *
-+ * Return physical endpoint number to use for this logical endpoint or zero if not valid.
-+ */
-+#if 0
-+int udc_check_ep (int logical_endpoint, int packetsize)
-+{
-+ if ((logical_endpoint == 0x80) ||
-+ ((logical_endpoint & 0x8f) != logical_endpoint)) {
-+ return 0;
-+ }
-+
-+ switch (packetsize) {
-+ case 8:
-+ case 16:
-+ case 32:
-+ case 64:
-+ case 128:
-+ case 256:
-+ case 512:
-+ break;
-+ default:
-+ return 0;
-+ }
-+
-+ return EP_ADDR_TO_PHYS_EP (logical_endpoint);
-+}
-+#endif
-+
-+/*
-+ * udc_setup_ep - setup endpoint
-+ *
-+ * Associate a physical endpoint with endpoint_instance
-+ */
-+void udc_setup_ep (struct usb_device_instance *device,
-+ unsigned int ep, struct usb_endpoint_instance *endpoint)
-+{
-+ UDCDBGA ("setting up endpoint addr %x", endpoint->endpoint_address);
-+
-+ /* This routine gets called by bi_modinit for endpoint 0 and from
-+ * bi_config for all of the other endpoints. bi_config gets called
-+ * during the DEVICE_CREATE, DEVICE_CONFIGURED, and
-+ * DEVICE_SET_INTERFACE events. We need to reconfigure the OMAP packet
-+ * RAM after bi_config scans the selected device configuration and
-+ * initializes the endpoint structures, but before this routine enables
-+ * the OUT endpoint FIFOs. Since bi_config calls this routine in a
-+ * loop for endpoints 1 through UDC_MAX_ENDPOINTS, we reconfigure our
-+ * packet RAM here when ep==1.
-+ * I really hate to do this here, but it seems like the API exported
-+ * by the USB bus interface controller driver to the usbd-bi module
-+ * isn't quite right so there is no good place to do this.
-+ */
-+ if (ep == 1) {
-+ omap1510_deconfigure_device ();
-+ omap1510_configure_device (device);
-+ }
-+
-+ if (endpoint && (ep < UDC_MAX_ENDPOINTS)) {
-+ int ep_addr = endpoint->endpoint_address;
-+
-+ if (!ep_addr) {
-+ /* nothing to do for endpoint 0 */
-+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
-+ /* nothing to do for IN (tx) endpoints */
-+ } else { /* OUT (rx) endpoint */
-+ if (endpoint->rcv_packetSize) {
-+ /*struct urb* urb = &(urb_out_array[ep&0xFF]); */
-+ /*urb->endpoint = endpoint; */
-+ /*urb->device = device; */
-+ /*urb->buffer_length = sizeof(urb->buffer); */
-+
-+ /*endpoint->rcv_urb = urb; */
-+ omap1510_prepare_endpoint_for_rx (ep_addr);
-+ }
-+ }
-+ }
-+}
-+
-+/**
-+ * udc_disable_ep - disable endpoint
-+ * @ep:
-+ *
-+ * Disable specified endpoint
-+ */
-+#if 0
-+void udc_disable_ep (unsigned int ep_addr)
-+{
-+ /*int ep_addr = PHYS_EP_TO_EP_ADDR(ep); */
-+ int ep_num = ep_addr & USB_ENDPOINT_NUMBER_MASK;
-+ struct usb_endpoint_instance *endpoint = omap1510_find_ep (ep_addr); /*udc_device->bus->endpoint_array + ep; */
-+
-+ UDCDBGA ("disable ep_addr %d", ep_addr);
-+
-+ if (!ep_num) {
-+ /* nothing to do for endpoint 0 */ ;
-+ } else if ((ep_addr & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
-+ if (endpoint->tx_packetSize) {
-+ /* we have a valid tx endpoint */
-+ /*usbd_flush_tx(endpoint); */
-+ endpoint->tx_urb = NULL;
-+ }
-+ } else {
-+ if (endpoint->rcv_packetSize) {
-+ /* we have a valid rx endpoint */
-+ /*usbd_flush_rcv(endpoint); */
-+ endpoint->rcv_urb = NULL;
-+ }
-+ }
-+}
-+#endif
-+
-+/* ************************************************************************** */
-+
-+/**
-+ * udc_connected - is the USB cable connected
-+ *
-+ * Return non-zero if cable is connected.
-+ */
-+#if 0
-+int udc_connected (void)
-+{
-+ return ((inw (UDC_DEVSTAT) & UDC_ATT) == UDC_ATT);
-+}
-+#endif
-+
-+/* Turn on the USB connection by enabling the pullup resistor */
-+void udc_connect (void)
-+{
-+ UDCDBG ("connect, enable Pullup");
-+}
-+
-+/* Turn off the USB connection by disabling the pullup resistor */
-+void udc_disconnect (void)
-+{
-+ UDCDBG ("disconnect, disable Pullup");
-+}
-+
-+/* ************************************************************************** */
-+
-+
-+/*
-+ * udc_disable_interrupts - disable interrupts
-+ * switch off interrupts
-+ */
-+#if 0
-+void udc_disable_interrupts (struct usb_device_instance *device)
-+{
-+ UDCDBG ("disabling all interrupts");
-+ outw (0, UDC_IRQ_EN);
-+}
-+#endif
-+
-+/* ************************************************************************** */
-+
-+/**
-+ * udc_ep0_packetsize - return ep0 packetsize
-+ */
-+#if 0
-+int udc_ep0_packetsize (void)
-+{
-+ return EP0_PACKETSIZE;
-+}
-+#endif
-+
-+/* Switch on the UDC */
-+void udc_enable (struct usb_device_instance *device)
-+{
-+ UDCDBGA ("enable device %p, status %d", device, device->status);
-+
-+ /* initialize driver state variables */
-+ udc_devstat = 0;
-+
-+ /* Save the device structure pointer */
-+ udc_device = device;
-+
-+ /* Setup ep0 urb */
-+ if (!ep0_urb) {
-+ ep0_urb =
-+ usbd_alloc_urb (udc_device,
-+ udc_device->bus->endpoint_array);
-+ } else {
-+ serial_printf ("udc_enable: ep0_urb already allocated %p\n",
-+ ep0_urb);
-+ }
-+
-+#ifdef FIXME
-+ /* The VBUS_MODE bit selects whether VBUS detection is done via
-+ * software (1) or hardware (0). When software detection is
-+ * selected, VBUS_CTRL selects whether USB is not connected (0)
-+ * or connected (1).
-+ */
-+ outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_CTRL | UDC_VBUS_MODE,
-+ FUNC_MUX_CTRL_0);
-+ UDCREGL (FUNC_MUX_CTRL_0);
-+#endif
-+
-+ s3c2410_configure_device(device);
-+}
-+
-+/* Switch off the UDC */
-+void udc_disable (void)
-+{
-+ UDCDBG ("disable UDC");
-+
-+ s3c2410_deconfigure_device();
-+
-+#ifdef FIXME
-+ /* The VBUS_MODE bit selects whether VBUS detection is done via
-+ * software (1) or hardware (0). When software detection is
-+ * selected, VBUS_CTRL selects whether USB is not connected (0)
-+ * or connected (1).
-+ */
-+ outl (inl (FUNC_MUX_CTRL_0) | UDC_VBUS_MODE, FUNC_MUX_CTRL_0);
-+ outl (inl (FUNC_MUX_CTRL_0) & ~UDC_VBUS_CTRL, FUNC_MUX_CTRL_0);
-+ UDCREGL (FUNC_MUX_CTRL_0);
-+#endif
-+
-+ /* Free ep0 URB */
-+ if (ep0_urb) {
-+ /*usbd_dealloc_urb(ep0_urb); */
-+ ep0_urb = NULL;
-+ }
-+
-+ /* Reset device pointer.
-+ * We ought to do this here to balance the initialization of udc_device
-+ * in udc_enable, but some of our other exported functions get called
-+ * by the bus interface driver after udc_disable, so we have to hang on
-+ * to the device pointer to avoid a null pointer dereference. */
-+ /* udc_device = NULL; */
-+}
-+
-+/**
-+ * udc_startup - allow udc code to do any additional startup
-+ */
-+void udc_startup_events (struct usb_device_instance *device)
-+{
-+ /* The DEVICE_INIT event puts the USB device in the state STATE_INIT. */
-+ usbd_device_event_irq (device, DEVICE_INIT, 0);
-+
-+ /* The DEVICE_CREATE event puts the USB device in the state
-+ * STATE_ATTACHED.
-+ */
-+ usbd_device_event_irq (device, DEVICE_CREATE, 0);
-+
-+ /* Some USB controller driver implementations signal
-+ * DEVICE_HUB_CONFIGURED and DEVICE_RESET events here.
-+ * DEVICE_HUB_CONFIGURED causes a transition to the state STATE_POWERED,
-+ * and DEVICE_RESET causes a transition to the state STATE_DEFAULT.
-+ * The OMAP USB client controller has the capability to detect when the
-+ * USB cable is connected to a powered USB bus via the ATT bit in the
-+ * DEVSTAT register, so we will defer the DEVICE_HUB_CONFIGURED and
-+ * DEVICE_RESET events until later.
-+ */
-+
-+ udc_enable (device);
-+}
-+
-+#endif
-Index: git/fs/cramfs/cramfs.c
-===================================================================
---- git.orig/fs/cramfs/cramfs.c 2007-01-04 12:21:15.000000000 +0100
-+++ git/fs/cramfs/cramfs.c 2007-01-04 12:21:18.000000000 +0100
-@@ -27,7 +27,7 @@
- #include <common.h>
- #include <malloc.h>
-
--#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
-+#if (CONFIG_COMMANDS & CFG_CMD_CRAMFS)
-
- #include <asm/byteorder.h>
- #include <linux/stat.h>
-@@ -343,5 +343,22 @@
- }
- return 1;
- }
--
-+#else
-+int cramfs_load (char *loadoffset, struct part_info *info, char *filename)
-+{
-+ return -1;
-+}
-+int cramfs_ls (struct part_info *info, char *filename)
-+{
-+ return 0;
-+}
-+int cramfs_info (struct part_info *info)
-+{
-+ return 0;
-+}
-+int cramfs_check (struct part_info *info)
-+{
-+ return 0;
-+}
- #endif /* CFG_FS_CRAMFS */
-+
-Index: git/include/asm-arm/arch-s3c24x0/mmc.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ git/include/asm-arm/arch-s3c24x0/mmc.h 2007-01-04 12:21:18.000000000 +0100
-@@ -0,0 +1,112 @@
-+/*
-+ * linux/drivers/mmc/mmc_pxa.h
-+ *
-+ * Author: Vladimir Shebordaev, Igor Oblakov
-+ * Copyright: MontaVista Software Inc.
-+ *
-+ * $Id: mmc_pxa.h,v 0.3.1.6 2002/09/25 19:25:48 ted Exp ted $
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __MMC_PXA_P_H__
-+#define __MMC_PXA_P_H__
-+
-+#include <asm/arch/regs-sdi.h>
-+
-+#define MMC_DEFAULT_RCA (1<<16)
-+
-+#define MMC_BLOCK_SIZE 512
-+#define MMC_CMD_RESET 0
-+#define MMC_CMD_SEND_OP_COND 1
-+#define MMC_CMD_ALL_SEND_CID 2
-+#define MMC_CMD_SET_RCA 3
-+#define MMC_CMD_SELECT_CARD 7
-+#define MMC_CMD_SEND_CSD 9
-+#define MMC_CMD_SEND_CID 10
-+#define MMC_CMD_SEND_STATUS 13
-+#define MMC_CMD_SET_BLOCKLEN 16
-+#define MMC_CMD_READ_BLOCK 17
-+#define MMC_CMD_RD_BLK_MULTI 18
-+#define MMC_CMD_WRITE_BLOCK 24
-+
-+#define MMC_MAX_BLOCK_SIZE 512
-+
-+#define MMC_R1_IDLE_STATE 0x01
-+#define MMC_R1_ERASE_STATE 0x02
-+#define MMC_R1_ILLEGAL_CMD 0x04
-+#define MMC_R1_COM_CRC_ERR 0x08
-+#define MMC_R1_ERASE_SEQ_ERR 0x01
-+#define MMC_R1_ADDR_ERR 0x02
-+#define MMC_R1_PARAM_ERR 0x04
-+
-+#define MMC_R1B_WP_ERASE_SKIP 0x0002
-+#define MMC_R1B_ERR 0x0004
-+#define MMC_R1B_CC_ERR 0x0008
-+#define MMC_R1B_CARD_ECC_ERR 0x0010
-+#define MMC_R1B_WP_VIOLATION 0x0020
-+#define MMC_R1B_ERASE_PARAM 0x0040
-+#define MMC_R1B_OOR 0x0080
-+#define MMC_R1B_IDLE_STATE 0x0100
-+#define MMC_R1B_ERASE_RESET 0x0200
-+#define MMC_R1B_ILLEGAL_CMD 0x0400
-+#define MMC_R1B_COM_CRC_ERR 0x0800
-+#define MMC_R1B_ERASE_SEQ_ERR 0x1000
-+#define MMC_R1B_ADDR_ERR 0x2000
-+#define MMC_R1B_PARAM_ERR 0x4000
-+
-+typedef struct mmc_cid
-+{
-+/* FIXME: BYTE_ORDER */
-+ uchar year:4,
-+ month:4;
-+ uchar sn[3];
-+ uchar fwrev:4,
-+ hwrev:4;
-+ uchar name[6];
-+ uchar id[3];
-+} mmc_cid_t;
-+
-+typedef struct mmc_csd
-+{
-+ uchar ecc:2,
-+ file_format:2,
-+ tmp_write_protect:1,
-+ perm_write_protect:1,
-+ copy:1,
-+ file_format_grp:1;
-+ uint64_t content_prot_app:1,
-+ rsvd3:4,
-+ write_bl_partial:1,
-+ write_bl_len:4,
-+ r2w_factor:3,
-+ default_ecc:2,
-+ wp_grp_enable:1,
-+ wp_grp_size:5,
-+ erase_grp_mult:5,
-+ erase_grp_size:5,
-+ c_size_mult1:3,
-+ vdd_w_curr_max:3,
-+ vdd_w_curr_min:3,
-+ vdd_r_curr_max:3,
-+ vdd_r_curr_min:3,
-+ c_size:12,
-+ rsvd2:2,
-+ dsr_imp:1,
-+ read_blk_misalign:1,
-+ write_blk_misalign:1,
-+ read_bl_partial:1;
-+
-+ ushort read_bl_len:4,
-+ ccc:12;
-+ uchar tran_speed;
-+ uchar nsac;
-+ uchar taac;
-+ uchar rsvd1:2,
-+ spec_vers:4,
-+ csd_structure:2;
-+} mmc_csd_t;
-+
-+
-+#endif /* __MMC_PXA_P_H__ */
-Index: git/include/asm-arm/arch-s3c24x0/regs-sdi.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ git/include/asm-arm/arch-s3c24x0/regs-sdi.h 2007-01-04 12:21:18.000000000 +0100
-@@ -0,0 +1,110 @@
-+/* linux/include/asm/arch-s3c2410/regs-sdi.h
-+ *
-+ * Copyright (c) 2004 Simtec Electronics <linux at simtec.co.uk>
-+ * http://www.simtec.co.uk/products/SWLINUX/
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * S3C2410 MMC/SDIO register definitions
-+ *
-+ * Changelog:
-+ * 18-Aug-2004 Ben Dooks Created initial file
-+ * 29-Nov-2004 Koen Martens Added some missing defines, fixed duplicates
-+ * 29-Nov-2004 Ben Dooks Updated Koen's patch
-+*/
-+
-+#ifndef __ASM_ARM_REGS_SDI
-+#define __ASM_ARM_REGS_SDI "regs-sdi.h"
-+
-+#define S3C2440_SDICON_SDRESET (1<<8)
-+#define S3C2440_SDICON_MMCCLOCK (1<<5)
-+#define S3C2410_SDICON_BYTEORDER (1<<4)
-+#define S3C2410_SDICON_SDIOIRQ (1<<3)
-+#define S3C2410_SDICON_RWAITEN (1<<2)
-+#define S3C2410_SDICON_FIFORESET (1<<1)
-+#define S3C2410_SDICON_CLOCKTYPE (1<<0)
-+
-+#define S3C2410_SDICMDCON_ABORT (1<<12)
-+#define S3C2410_SDICMDCON_WITHDATA (1<<11)
-+#define S3C2410_SDICMDCON_LONGRSP (1<<10)
-+#define S3C2410_SDICMDCON_WAITRSP (1<<9)
-+#define S3C2410_SDICMDCON_CMDSTART (1<<8)
-+#define S3C2410_SDICMDCON_SENDERHOST (1<<6)
-+#define S3C2410_SDICMDCON_INDEX (0x3f)
-+
-+#define S3C2410_SDICMDSTAT_CRCFAIL (1<<12)
-+#define S3C2410_SDICMDSTAT_CMDSENT (1<<11)
-+#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10)
-+#define S3C2410_SDICMDSTAT_RSPFIN (1<<9)
-+#define S3C2410_SDICMDSTAT_XFERING (1<<8)
-+#define S3C2410_SDICMDSTAT_INDEX (0xff)
-+
-+#define S3C2440_SDIDCON_DS_BYTE (0<<22)
-+#define S3C2440_SDIDCON_DS_HALFWORD (1<<22)
-+#define S3C2440_SDIDCON_DS_WORD (2<<22)
-+#define S3C2410_SDIDCON_IRQPERIOD (1<<21)
-+#define S3C2410_SDIDCON_TXAFTERRESP (1<<20)
-+#define S3C2410_SDIDCON_RXAFTERCMD (1<<19)
-+#define S3C2410_SDIDCON_BUSYAFTERCMD (1<<18)
-+#define S3C2410_SDIDCON_BLOCKMODE (1<<17)
-+#define S3C2410_SDIDCON_WIDEBUS (1<<16)
-+#define S3C2410_SDIDCON_DMAEN (1<<15)
-+#define S3C2410_SDIDCON_STOP (1<<14)
-+#define S3C2440_SDIDCON_DATSTART (1<<14)
-+#define S3C2410_SDIDCON_DATMODE (3<<12)
-+#define S3C2410_SDIDCON_BLKNUM (0x7ff)
-+
-+/* constants for S3C2410_SDIDCON_DATMODE */
-+#define S3C2410_SDIDCON_XFER_READY (0<<12)
-+#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12)
-+#define S3C2410_SDIDCON_XFER_RXSTART (2<<12)
-+#define S3C2410_SDIDCON_XFER_TXSTART (3<<12)
-+
-+#define S3C2410_SDIDCON_BLKNUM_MASK (0xFFF)
-+#define S3C2410_SDIDCNT_BLKNUM_SHIFT (12)
-+
-+#define S3C2410_SDIDSTA_RDYWAITREQ (1<<10)
-+#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9)
-+#define S3C2410_SDIDSTA_FIFOFAIL (1<<8) /* reserved on 2440 */
-+#define S3C2410_SDIDSTA_CRCFAIL (1<<7)
-+#define S3C2410_SDIDSTA_RXCRCFAIL (1<<6)
-+#define S3C2410_SDIDSTA_DATATIMEOUT (1<<5)
-+#define S3C2410_SDIDSTA_XFERFINISH (1<<4)
-+#define S3C2410_SDIDSTA_BUSYFINISH (1<<3)
-+#define S3C2410_SDIDSTA_SBITERR (1<<2) /* reserved on 2410a/2440 */
-+#define S3C2410_SDIDSTA_TXDATAON (1<<1)
-+#define S3C2410_SDIDSTA_RXDATAON (1<<0)
-+
-+#define S3C2440_SDIFSTA_FIFORESET (1<<16)
-+#define S3C2440_SDIFSTA_FIFOFAIL (3<<14) /* 3 is correct (2 bits) */
-+#define S3C2410_SDIFSTA_TFDET (1<<13)
-+#define S3C2410_SDIFSTA_RFDET (1<<12)
-+#define S3C2410_SDIFSTA_TFHALF (1<<11)
-+#define S3C2410_SDIFSTA_TFEMPTY (1<<10)
-+#define S3C2410_SDIFSTA_RFLAST (1<<9)
-+#define S3C2410_SDIFSTA_RFFULL (1<<8)
-+#define S3C2410_SDIFSTA_RFHALF (1<<7)
-+#define S3C2410_SDIFSTA_COUNTMASK (0x7f)
-+
-+#define S3C2410_SDIIMSK_RESPONSECRC (1<<17)
-+#define S3C2410_SDIIMSK_CMDSENT (1<<16)
-+#define S3C2410_SDIIMSK_CMDTIMEOUT (1<<15)
-+#define S3C2410_SDIIMSK_RESPONSEND (1<<14)
-+#define S3C2410_SDIIMSK_READWAIT (1<<13)
-+#define S3C2410_SDIIMSK_SDIOIRQ (1<<12)
-+#define S3C2410_SDIIMSK_FIFOFAIL (1<<11)
-+#define S3C2410_SDIIMSK_CRCSTATUS (1<<10)
-+#define S3C2410_SDIIMSK_DATACRC (1<<9)
-+#define S3C2410_SDIIMSK_DATATIMEOUT (1<<8)
-+#define S3C2410_SDIIMSK_DATAFINISH (1<<7)
-+#define S3C2410_SDIIMSK_BUSYFINISH (1<<6)
-+#define S3C2410_SDIIMSK_SBITERR (1<<5) /* reserved 2440/2410a */
-+#define S3C2410_SDIIMSK_TXFIFOHALF (1<<4)
-+#define S3C2410_SDIIMSK_TXFIFOEMPTY (1<<3)
-+#define S3C2410_SDIIMSK_RXFIFOLAST (1<<2)
-+#define S3C2410_SDIIMSK_RXFIFOFULL (1<<1)
-+#define S3C2410_SDIIMSK_RXFIFOHALF (1<<0)
-+
-+#endif /* __ASM_ARM_REGS_SDI */
-Index: git/include/asm-arm/mach-types.h
-===================================================================
---- git.orig/include/asm-arm/mach-types.h 2007-01-04 12:21:15.000000000 +0100
-+++ git/include/asm-arm/mach-types.h 2007-01-04 12:21:18.000000000 +0100
-@@ -424,7 +424,7 @@
- #define MACH_TYPE_MPORT3S 411
- #define MACH_TYPE_RA_ALPHA 412
- #define MACH_TYPE_XCEP 413
--#define MACH_TYPE_ARCOM_MERCURY 414
-+#define MACH_TYPE_ARCOM_VULCAN 414
- #define MACH_TYPE_STARGATE 415
- #define MACH_TYPE_ARMADILLOJ 416
- #define MACH_TYPE_ELROY_JACK 417
-@@ -457,7 +457,7 @@
- #define MACH_TYPE_XM250 444
- #define MACH_TYPE_T6TC1XB 445
- #define MACH_TYPE_ESS710 446
--#define MACH_TYPE_MX3ADS 447
-+#define MACH_TYPE_MX31ADS 447
- #define MACH_TYPE_HIMALAYA 448
- #define MACH_TYPE_BOLFENK 449
- #define MACH_TYPE_AT91RM9200KR 450
-@@ -736,7 +736,309 @@
- #define MACH_TYPE_LN2410SBC 725
- #define MACH_TYPE_CB3RUFC 726
- #define MACH_TYPE_MP2USB 727
--#define MACH_TYPE_PDNB3 1002
-+#define MACH_TYPE_NTNP425C 728
-+#define MACH_TYPE_COLIBRI 729
-+#define MACH_TYPE_PCM7220 730
-+#define MACH_TYPE_GATEWAY7001 731
-+#define MACH_TYPE_PCM027 732
-+#define MACH_TYPE_CMPXA 733
-+#define MACH_TYPE_ANUBIS 734
-+#define MACH_TYPE_ITE8152 735
-+#define MACH_TYPE_LPC3XXX 736
-+#define MACH_TYPE_PUPPETEER 737
-+#define MACH_TYPE_MACH_VADATECH 738
-+#define MACH_TYPE_E570 739
-+#define MACH_TYPE_X50 740
-+#define MACH_TYPE_RECON 741
-+#define MACH_TYPE_XBOARDGP8 742
-+#define MACH_TYPE_FPIC2 743
-+#define MACH_TYPE_AKITA 744
-+#define MACH_TYPE_A81 745
-+#define MACH_TYPE_SVM_SC25X 746
-+#define MACH_TYPE_VADATECH020 747
-+#define MACH_TYPE_TLI 748
-+#define MACH_TYPE_EDB9315LC 749
-+#define MACH_TYPE_PASSEC 750
-+#define MACH_TYPE_DS_TIGER 751
-+#define MACH_TYPE_E310 752
-+#define MACH_TYPE_E330 753
-+#define MACH_TYPE_RT3000 754
-+#define MACH_TYPE_NOKIA770 755
-+#define MACH_TYPE_PNX0106 756
-+#define MACH_TYPE_HX21XX 757
-+#define MACH_TYPE_FARADAY 758
-+#define MACH_TYPE_SBC9312 759
-+#define MACH_TYPE_BATMAN 760
-+#define MACH_TYPE_JPD201 761
-+#define MACH_TYPE_MIPSA 762
-+#define MACH_TYPE_KACOM 763
-+#define MACH_TYPE_SWARCOCPU 764
-+#define MACH_TYPE_SWARCODSL 765
-+#define MACH_TYPE_BLUEANGEL 766
-+#define MACH_TYPE_HAIRYGRAMA 767
-+#define MACH_TYPE_BANFF 768
-+#define MACH_TYPE_CARMEVA 769
-+#define MACH_TYPE_SAM255 770
-+#define MACH_TYPE_PPM10 771
-+#define MACH_TYPE_EDB9315A 772
-+#define MACH_TYPE_SUNSET 773
-+#define MACH_TYPE_STARGATE2 774
-+#define MACH_TYPE_INTELMOTE2 775
-+#define MACH_TYPE_TRIZEPS4 776
-+#define MACH_TYPE_MAINSTONE2 777
-+#define MACH_TYPE_EZ_IXP42X 778
-+#define MACH_TYPE_TAPWAVE_ZODIAC 779
-+#define MACH_TYPE_UNIVERSALMETER 780
-+#define MACH_TYPE_HICOARM9 781
-+#define MACH_TYPE_PNX4008 782
-+#define MACH_TYPE_KWS6000 783
-+#define MACH_TYPE_PORTUX920T 784
-+#define MACH_TYPE_EZ_X5 785
-+#define MACH_TYPE_OMAP_RUDOLPH 786
-+#define MACH_TYPE_CPUAT91 787
-+#define MACH_TYPE_REA9200 788
-+#define MACH_TYPE_ACTS_PUNE_SA1110 789
-+#define MACH_TYPE_IXP425 790
-+#define MACH_TYPE_ARGONPLUSODYSSEY 791
-+#define MACH_TYPE_PERCH 792
-+#define MACH_TYPE_EIS05R1 793
-+#define MACH_TYPE_PEPPERPAD 794
-+#define MACH_TYPE_SB3010 795
-+#define MACH_TYPE_RM9200 796
-+#define MACH_TYPE_DMA03 797
-+#define MACH_TYPE_ROAD_S101 798
-+#define MACH_TYPE_IQ_NEXTGEN_A 799
-+#define MACH_TYPE_IQ_NEXTGEN_B 800
-+#define MACH_TYPE_IQ_NEXTGEN_C 801
-+#define MACH_TYPE_IQ_NEXTGEN_D 802
-+#define MACH_TYPE_IQ_NEXTGEN_E 803
-+#define MACH_TYPE_MALLOW_AT91 804
-+#define MACH_TYPE_CYBERTRACKER_I 805
-+#define MACH_TYPE_GESBC931X 806
-+#define MACH_TYPE_CENTIPAD 807
-+#define MACH_TYPE_ARMSOC 808
-+#define MACH_TYPE_SE4200 809
-+#define MACH_TYPE_EMS197A 810
-+#define MACH_TYPE_MICRO9 811
-+#define MACH_TYPE_MICRO9L 812
-+#define MACH_TYPE_UC5471DSP 813
-+#define MACH_TYPE_SJ5471ENG 814
-+#define MACH_TYPE_CMPXA26X 815
-+#define MACH_TYPE_NC 816
-+#define MACH_TYPE_OMAP_PALMTE 817
-+#define MACH_TYPE_AJAX52X 818
-+#define MACH_TYPE_SIRIUSTAR 819
-+#define MACH_TYPE_IODATA_HDLG 820
-+#define MACH_TYPE_AT91RM9200UTL 821
-+#define MACH_TYPE_BIOSAFE 822
-+#define MACH_TYPE_MP1000 823
-+#define MACH_TYPE_PARSY 824
-+#define MACH_TYPE_CCXP 825
-+#define MACH_TYPE_OMAP_GSAMPLE 826
-+#define MACH_TYPE_REALVIEW_EB 827
-+#define MACH_TYPE_SAMOA 828
-+#define MACH_TYPE_T3XSCALE 829
-+#define MACH_TYPE_I878 830
-+#define MACH_TYPE_BORZOI 831
-+#define MACH_TYPE_GECKO 832
-+#define MACH_TYPE_DS101 833
-+#define MACH_TYPE_OMAP_PALMTT2 834
-+#define MACH_TYPE_XSCALE_PALMLD 835
-+#define MACH_TYPE_CC9C 836
-+#define MACH_TYPE_SBC1670 837
-+#define MACH_TYPE_IXDP28X5 838
-+#define MACH_TYPE_OMAP_PALMTT 839
-+#define MACH_TYPE_ML696K 840
-+#define MACH_TYPE_ARCOM_ZEUS 841
-+#define MACH_TYPE_OSIRIS 842
-+#define MACH_TYPE_MAESTRO 843
-+#define MACH_TYPE_TUNGE2 844
-+#define MACH_TYPE_IXBBM 845
-+#define MACH_TYPE_MX27 846
-+#define MACH_TYPE_AX8004 847
-+#define MACH_TYPE_AT91SAM9261EK 848
-+#define MACH_TYPE_LOFT 849
-+#define MACH_TYPE_MAGPIE 850
-+#define MACH_TYPE_MX21 851
-+#define MACH_TYPE_MB87M3400 852
-+#define MACH_TYPE_MGUARD_DELTA 853
-+#define MACH_TYPE_DAVINCI_DVDP 854
-+#define MACH_TYPE_HTCUNIVERSAL 855
-+#define MACH_TYPE_TPAD 856
-+#define MACH_TYPE_ROVERP3 857
-+#define MACH_TYPE_JORNADA928 858
-+#define MACH_TYPE_MV88FXX81 859
-+#define MACH_TYPE_STMP36XX 860
-+#define MACH_TYPE_SXNI79524 861
-+#define MACH_TYPE_AMS_DELTA 862
-+#define MACH_TYPE_URANIUM 863
-+#define MACH_TYPE_UCON 864
-+#define MACH_TYPE_NAS100D 865
-+#define MACH_TYPE_L083_1000 866
-+#define MACH_TYPE_EZX 867
-+#define MACH_TYPE_PNX5220 868
-+#define MACH_TYPE_BUTTE 869
-+#define MACH_TYPE_SRM2 870
-+#define MACH_TYPE_DSBR 871
-+#define MACH_TYPE_CRYSTALBALL 872
-+#define MACH_TYPE_TINYPXA27X 873
-+#define MACH_TYPE_HERBIE 874
-+#define MACH_TYPE_MAGICIAN 875
-+#define MACH_TYPE_CM4002 876
-+#define MACH_TYPE_B4 877
-+#define MACH_TYPE_MAUI 878
-+#define MACH_TYPE_CYBERTRACKER_G 879
-+#define MACH_TYPE_NXDKN 880
-+#define MACH_TYPE_MIO8390 881
-+#define MACH_TYPE_OMI_BOARD 882
-+#define MACH_TYPE_MX21CIV 883
-+#define MACH_TYPE_MAHI_CDAC 884
-+#define MACH_TYPE_XSCALE_PALMTX 885
-+#define MACH_TYPE_S3C2413 887
-+#define MACH_TYPE_SAMSYS_EP0 888
-+#define MACH_TYPE_WG302V1 889
-+#define MACH_TYPE_WG302V2 890
-+#define MACH_TYPE_EB42X 891
-+#define MACH_TYPE_IQ331ES 892
-+#define MACH_TYPE_COSYDSP 893
-+#define MACH_TYPE_UPLAT7D 894
-+#define MACH_TYPE_PTDAVINCI 895
-+#define MACH_TYPE_MBUS 896
-+#define MACH_TYPE_NADIA2VB 897
-+#define MACH_TYPE_R1000 898
-+#define MACH_TYPE_HW90250 899
-+#define MACH_TYPE_OMAP_2430SDP 900
-+#define MACH_TYPE_DAVINCI_EVM 901
-+#define MACH_TYPE_OMAP_TORNADO 902
-+#define MACH_TYPE_OLOCREEK 903
-+#define MACH_TYPE_PALMZ72 904
-+#define MACH_TYPE_NXDB500 905
-+#define MACH_TYPE_APF9328 906
-+#define MACH_TYPE_OMAP_WIPOQ 907
-+#define MACH_TYPE_OMAP_TWIP 908
-+#define MACH_TYPE_XSCALE_PALMTREO650 909
-+#define MACH_TYPE_ACUMEN 910
-+#define MACH_TYPE_XP100 911
-+#define MACH_TYPE_FS2410 912
-+#define MACH_TYPE_PXA270_CERF 913
-+#define MACH_TYPE_SQ2FTLPALM 914
-+#define MACH_TYPE_BSEMSERVER 915
-+#define MACH_TYPE_NETCLIENT 916
-+#define MACH_TYPE_XSCALE_PALMTT5 917
-+#define MACH_TYPE_OMAP_PALMTC 918
-+#define MACH_TYPE_OMAP_APOLLON 919
-+#define MACH_TYPE_ARGONLVEVB 920
-+#define MACH_TYPE_REA_2D 921
-+#define MACH_TYPE_TI3E524 922
-+#define MACH_TYPE_ATEB9200 923
-+#define MACH_TYPE_AUCKLAND 924
-+#define MACH_TYPE_AK3320M 925
-+#define MACH_TYPE_DURAMAX 926
-+#define MACH_TYPE_N35 927
-+#define MACH_TYPE_PRONGHORN 928
-+#define MACH_TYPE_FUNDY 929
-+#define MACH_TYPE_LOGICPD_PXA270 930
-+#define MACH_TYPE_CPU777 931
-+#define MACH_TYPE_SIMICON9201 932
-+#define MACH_TYPE_LEAP2_HPM 933
-+#define MACH_TYPE_CM922TXA10 934
-+#define MACH_TYPE_PXA 935
-+#define MACH_TYPE_SANDGATE2 936
-+#define MACH_TYPE_SANDGATE2G 937
-+#define MACH_TYPE_SANDGATE2P 938
-+#define MACH_TYPE_FRED_JACK 939
-+#define MACH_TYPE_TTG_COLOR1 940
-+#define MACH_TYPE_NXEB500HMI 941
-+#define MACH_TYPE_NETDCU8 942
-+#define MACH_TYPE_ML675050_CPU_BOA 943
-+#define MACH_TYPE_NG_FVX538 944
-+#define MACH_TYPE_NG_FVS338 945
-+#define MACH_TYPE_PNX4103 946
-+#define MACH_TYPE_HESDB 947
-+#define MACH_TYPE_XSILO 948
-+#define MACH_TYPE_ESPRESSO 949
-+#define MACH_TYPE_EMLC 950
-+#define MACH_TYPE_SISTERON 951
-+#define MACH_TYPE_RX1950 952
-+#define MACH_TYPE_TSC_VENUS 953
-+#define MACH_TYPE_DS101J 954
-+#define MACH_TYPE_MXC30030ADS 955
-+#define MACH_TYPE_FUJITSU_WIMAXSOC 956
-+#define MACH_TYPE_DUALPCMODEM 957
-+#define MACH_TYPE_GESBC9312 958
-+#define MACH_TYPE_HTCAPACHE 959
-+#define MACH_TYPE_IXDP435 960
-+#define MACH_TYPE_CATPROVT100 961
-+#define MACH_TYPE_PICOTUX1XX 962
-+#define MACH_TYPE_PICOTUX2XX 963
-+#define MACH_TYPE_DSMG600 964
-+#define MACH_TYPE_EMPC2 965
-+#define MACH_TYPE_VENTURA 966
-+#define MACH_TYPE_PHIDGET_SBC 967
-+#define MACH_TYPE_IJ3K 968
-+#define MACH_TYPE_PISGAH 969
-+#define MACH_TYPE_OMAP_FSAMPLE 970
-+#define MACH_TYPE_SG720 971
-+#define MACH_TYPE_REDFOX 972
-+#define MACH_TYPE_MYSH_EP9315_1 973
-+#define MACH_TYPE_TPF106 974
-+#define MACH_TYPE_AT91RM9200KG 975
-+#define MACH_TYPE_SLEDB 976
-+#define MACH_TYPE_ONTRACK 977
-+#define MACH_TYPE_PM1200 978
-+#define MACH_TYPE_ESS24XXX 979
-+#define MACH_TYPE_COREMP7 980
-+#define MACH_TYPE_NEXCODER_6446 981
-+#define MACH_TYPE_STVC8380 982
-+#define MACH_TYPE_TEKLYNX 983
-+#define MACH_TYPE_CARBONADO 984
-+#define MACH_TYPE_SYSMOS_MP730 985
-+#define MACH_TYPE_SNAPPER_CL15 986
-+#define MACH_TYPE_PGIGIM 987
-+#define MACH_TYPE_PTX9160P2 988
-+#define MACH_TYPE_DCORE1 989
-+#define MACH_TYPE_VICTORPXA 990
-+#define MACH_TYPE_MX2DTB 991
-+#define MACH_TYPE_PXA_IREX_ER0100 992
-+#define MACH_TYPE_OMAP_PALMZ71 993
-+#define MACH_TYPE_BARTEC_DEG 994
-+#define MACH_TYPE_HW50251 995
-+#define MACH_TYPE_IBOX 996
-+#define MACH_TYPE_ATLASLH7A404 997
-+#define MACH_TYPE_PT2026 998
-+#define MACH_TYPE_HTCALPINE 999
-+#define MACH_TYPE_BARTEC_VTU 1000
-+#define MACH_TYPE_VCOREII 1001
-+#define MACH_TYPE_PDNB3 1002
-+#define MACH_TYPE_HTCBEETLES 1003
-+#define MACH_TYPE_S3C6400 1004
-+#define MACH_TYPE_S3C2443 1005
-+#define MACH_TYPE_OMAP_LDK 1006
-+#define MACH_TYPE_SMDK2460 1007
-+#define MACH_TYPE_SMDK2440 1008
-+#define MACH_TYPE_SMDK2412 1009
-+#define MACH_TYPE_WEBBOX 1010
-+#define MACH_TYPE_CWWNDP 1011
-+#define MACH_TYPE_DRAGON 1012
-+#define MACH_TYPE_OPENDO_CPU_BOARD 1013
-+#define MACH_TYPE_CCM2200 1014
-+#define MACH_TYPE_ETWARM 1015
-+#define MACH_TYPE_M93030 1016
-+#define MACH_TYPE_CC7U 1017
-+#define MACH_TYPE_MTT_RANGER 1018
-+#define MACH_TYPE_NEXUS 1019
-+#define MACH_TYPE_DESMAN 1020
-+#define MACH_TYPE_BKDE303 1021
-+#define MACH_TYPE_SMDK2413 1022
-+#define MACH_TYPE_AML_M7200 1023
-+#define MACH_TYPE_AML_M5900 1024
-+#define MACH_TYPE_SG640 1025
-+#define MACH_TYPE_EDG79524 1026
-+#define MACH_TYPE_AI2410 1027
-+#define MACH_TYPE_IXP465 1028
-+#define MACH_TYPE_BALLOON3 1029
-+#define MACH_TYPE_QT2410 1108
-+#define MACH_TYPE_GTA01 1182
-
- #ifdef CONFIG_ARCH_EBSA110
- # ifdef machine_arch_type
-@@ -3541,9 +3843,9 @@
- # else
- # define machine_arch_type MACH_TYPE_RAMSES
- # endif
--# define machine_is_ramses() (machine_arch_type == MACH_TYPE_RAMSES)
-+# define machine_is_mnci() (machine_arch_type == MACH_TYPE_RAMSES)
- #else
--# define machine_is_ramses() (0)
-+# define machine_is_mnci() (0)
- #endif
-
- #ifdef CONFIG_ARCH_S28X
-@@ -4501,9 +4803,9 @@
- # else
- # define machine_arch_type MACH_TYPE_M825XX
- # endif
--# define machine_is_m825xx() (machine_arch_type == MACH_TYPE_M825XX)
-+# define machine_is_comcerto() (machine_arch_type == MACH_TYPE_M825XX)
- #else
--# define machine_is_m825xx() (0)
-+# define machine_is_comcerto() (0)
- #endif
-
- #ifdef CONFIG_SA1100_M7100
-@@ -5658,16 +5960,16 @@
- # define machine_is_xcep() (0)
- #endif
-
--#ifdef CONFIG_MACH_ARCOM_MERCURY
-+#ifdef CONFIG_MACH_ARCOM_VULCAN
- # ifdef machine_arch_type
- # undef machine_arch_type
- # define machine_arch_type __machine_arch_type
- # else
--# define machine_arch_type MACH_TYPE_ARCOM_MERCURY
-+# define machine_arch_type MACH_TYPE_ARCOM_VULCAN
- # endif
--# define machine_is_arcom_mercury() (machine_arch_type == MACH_TYPE_ARCOM_MERCURY)
-+# define machine_is_arcom_vulcan() (machine_arch_type == MACH_TYPE_ARCOM_VULCAN)
- #else
--# define machine_is_arcom_mercury() (0)
-+# define machine_is_arcom_vulcan() (0)
- #endif
-
- #ifdef CONFIG_MACH_STARGATE
-@@ -6054,16 +6356,16 @@
- # define machine_is_ess710() (0)
- #endif
-
--#ifdef CONFIG_MACH_MX3ADS
-+#ifdef CONFIG_MACH_MX31ADS
- # ifdef machine_arch_type
- # undef machine_arch_type
- # define machine_arch_type __machine_arch_type
- # else
--# define machine_arch_type MACH_TYPE_MX3ADS
-+# define machine_arch_type MACH_TYPE_MX31ADS
- # endif
--# define machine_is_mx3ads() (machine_arch_type == MACH_TYPE_MX3ADS)
-+# define machine_is_mx31ads() (machine_arch_type == MACH_TYPE_MX31ADS)
- #else
--# define machine_is_mx3ads() (0)
-+# define machine_is_mx31ads() (0)
- #endif
-
- #ifdef CONFIG_MACH_HIMALAYA
-@@ -7333,9 +7635,9 @@
- # else
- # define machine_arch_type MACH_TYPE_ARGONPLUSEVB
- # endif
--# define machine_is_argonplusevb() (machine_arch_type == MACH_TYPE_ARGONPLUSEVB)
-+# define machine_is_i30030evb() (machine_arch_type == MACH_TYPE_ARGONPLUSEVB)
- #else
--# define machine_is_argonplusevb() (0)
-+# define machine_is_i30030evb() (0)
- #endif
-
- #ifdef CONFIG_MACH_SCMA11EVB
-@@ -7345,9 +7647,9 @@
- # else
- # define machine_arch_type MACH_TYPE_SCMA11EVB
- # endif
--# define machine_is_scma11evb() (machine_arch_type == MACH_TYPE_SCMA11EVB)
-+# define machine_is_mxc27530evb() (machine_arch_type == MACH_TYPE_SCMA11EVB)
- #else
--# define machine_is_scma11evb() (0)
-+# define machine_is_mxc27530evb() (0)
- #endif
-
- #ifdef CONFIG_MACH_SMDK2800
-@@ -8305,9 +8607,9 @@
- # else
- # define machine_arch_type MACH_TYPE_SCMA11BB
- # endif
--# define machine_is_scma11bb() (machine_arch_type == MACH_TYPE_SCMA11BB)
-+# define machine_is_mxc27530ads() (machine_arch_type == MACH_TYPE_SCMA11BB)
- #else
--# define machine_is_scma11bb() (0)
-+# define machine_is_mxc27530ads() (0)
- #endif
-
- #ifdef CONFIG_MACH_TRIZEPS3
-@@ -9193,9 +9495,9 @@
- # else
- # define machine_arch_type MACH_TYPE_ZEUSEVB
- # endif
--# define machine_is_zeusevb() (machine_arch_type == MACH_TYPE_ZEUSEVB)
-+# define machine_is_mxc91131evb() (machine_arch_type == MACH_TYPE_ZEUSEVB)
- #else
--# define machine_is_zeusevb() (0)
-+# define machine_is_mxc91131evb() (0)
- #endif
-
- #ifdef CONFIG_MACH_P700
-@@ -9402,6 +9704,3643 @@
- # define machine_is_mp2usb() (0)
- #endif
-
-+#ifdef CONFIG_MACH_NTNP425C
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NTNP425C
-+# endif
-+# define machine_is_ntnp425c() (machine_arch_type == MACH_TYPE_NTNP425C)
-+#else
-+# define machine_is_ntnp425c() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_COLIBRI
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_COLIBRI
-+# endif
-+# define machine_is_colibri() (machine_arch_type == MACH_TYPE_COLIBRI)
-+#else
-+# define machine_is_colibri() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PCM7220
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PCM7220
-+# endif
-+# define machine_is_pcm7220() (machine_arch_type == MACH_TYPE_PCM7220)
-+#else
-+# define machine_is_pcm7220() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_GATEWAY7001
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_GATEWAY7001
-+# endif
-+# define machine_is_gateway7001() (machine_arch_type == MACH_TYPE_GATEWAY7001)
-+#else
-+# define machine_is_gateway7001() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PCM027
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PCM027
-+# endif
-+# define machine_is_pcm027() (machine_arch_type == MACH_TYPE_PCM027)
-+#else
-+# define machine_is_pcm027() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CMPXA
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CMPXA
-+# endif
-+# define machine_is_cmpxa() (machine_arch_type == MACH_TYPE_CMPXA)
-+#else
-+# define machine_is_cmpxa() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ANUBIS
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ANUBIS
-+# endif
-+# define machine_is_anubis() (machine_arch_type == MACH_TYPE_ANUBIS)
-+#else
-+# define machine_is_anubis() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ITE8152
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ITE8152
-+# endif
-+# define machine_is_ite8152() (machine_arch_type == MACH_TYPE_ITE8152)
-+#else
-+# define machine_is_ite8152() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_LPC3XXX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_LPC3XXX
-+# endif
-+# define machine_is_lpc3xxx() (machine_arch_type == MACH_TYPE_LPC3XXX)
-+#else
-+# define machine_is_lpc3xxx() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PUPPETEER
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PUPPETEER
-+# endif
-+# define machine_is_puppeteer() (machine_arch_type == MACH_TYPE_PUPPETEER)
-+#else
-+# define machine_is_puppeteer() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MACH_VADATECH
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MACH_VADATECH
-+# endif
-+# define machine_is_vt001() (machine_arch_type == MACH_TYPE_MACH_VADATECH)
-+#else
-+# define machine_is_vt001() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_E570
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_E570
-+# endif
-+# define machine_is_e570() (machine_arch_type == MACH_TYPE_E570)
-+#else
-+# define machine_is_e570() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_X50
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_X50
-+# endif
-+# define machine_is_x50() (machine_arch_type == MACH_TYPE_X50)
-+#else
-+# define machine_is_x50() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_RECON
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_RECON
-+# endif
-+# define machine_is_recon() (machine_arch_type == MACH_TYPE_RECON)
-+#else
-+# define machine_is_recon() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_XBOARDGP8
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_XBOARDGP8
-+# endif
-+# define machine_is_xboardgp8() (machine_arch_type == MACH_TYPE_XBOARDGP8)
-+#else
-+# define machine_is_xboardgp8() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_FPIC2
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_FPIC2
-+# endif
-+# define machine_is_fpic2() (machine_arch_type == MACH_TYPE_FPIC2)
-+#else
-+# define machine_is_fpic2() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AKITA
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_AKITA
-+# endif
-+# define machine_is_akita() (machine_arch_type == MACH_TYPE_AKITA)
-+#else
-+# define machine_is_akita() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_A81
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_A81
-+# endif
-+# define machine_is_a81() (machine_arch_type == MACH_TYPE_A81)
-+#else
-+# define machine_is_a81() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SVM_SC25X
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SVM_SC25X
-+# endif
-+# define machine_is_svm_sc25x() (machine_arch_type == MACH_TYPE_SVM_SC25X)
-+#else
-+# define machine_is_svm_sc25x() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_VADATECH020
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_VADATECH020
-+# endif
-+# define machine_is_vt020() (machine_arch_type == MACH_TYPE_VADATECH020)
-+#else
-+# define machine_is_vt020() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TLI
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_TLI
-+# endif
-+# define machine_is_tli() (machine_arch_type == MACH_TYPE_TLI)
-+#else
-+# define machine_is_tli() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EDB9315LC
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_EDB9315LC
-+# endif
-+# define machine_is_edb9315lc() (machine_arch_type == MACH_TYPE_EDB9315LC)
-+#else
-+# define machine_is_edb9315lc() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PASSEC
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PASSEC
-+# endif
-+# define machine_is_passec() (machine_arch_type == MACH_TYPE_PASSEC)
-+#else
-+# define machine_is_passec() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DS_TIGER
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DS_TIGER
-+# endif
-+# define machine_is_ds_tiger() (machine_arch_type == MACH_TYPE_DS_TIGER)
-+#else
-+# define machine_is_ds_tiger() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_E310
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_E310
-+# endif
-+# define machine_is_e310() (machine_arch_type == MACH_TYPE_E310)
-+#else
-+# define machine_is_e310() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_E330
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_E330
-+# endif
-+# define machine_is_e330() (machine_arch_type == MACH_TYPE_E330)
-+#else
-+# define machine_is_e330() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_RT3000
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_RT3000
-+# endif
-+# define machine_is_rt3000() (machine_arch_type == MACH_TYPE_RT3000)
-+#else
-+# define machine_is_rt3000() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NOKIA770
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NOKIA770
-+# endif
-+# define machine_is_nokia770() (machine_arch_type == MACH_TYPE_NOKIA770)
-+#else
-+# define machine_is_nokia770() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PNX0106
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PNX0106
-+# endif
-+# define machine_is_pnx0106() (machine_arch_type == MACH_TYPE_PNX0106)
-+#else
-+# define machine_is_pnx0106() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HX21XX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_HX21XX
-+# endif
-+# define machine_is_hx21xx() (machine_arch_type == MACH_TYPE_HX21XX)
-+#else
-+# define machine_is_hx21xx() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_FARADAY
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_FARADAY
-+# endif
-+# define machine_is_faraday() (machine_arch_type == MACH_TYPE_FARADAY)
-+#else
-+# define machine_is_faraday() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SBC9312
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SBC9312
-+# endif
-+# define machine_is_sbc9312() (machine_arch_type == MACH_TYPE_SBC9312)
-+#else
-+# define machine_is_sbc9312() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BATMAN
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_BATMAN
-+# endif
-+# define machine_is_batman() (machine_arch_type == MACH_TYPE_BATMAN)
-+#else
-+# define machine_is_batman() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_JPD201
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_JPD201
-+# endif
-+# define machine_is_jpd201() (machine_arch_type == MACH_TYPE_JPD201)
-+#else
-+# define machine_is_jpd201() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MIPSA
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MIPSA
-+# endif
-+# define machine_is_mipsa() (machine_arch_type == MACH_TYPE_MIPSA)
-+#else
-+# define machine_is_mipsa() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_KACOM
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_KACOM
-+# endif
-+# define machine_is_kacom() (machine_arch_type == MACH_TYPE_KACOM)
-+#else
-+# define machine_is_kacom() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SWARCOCPU
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SWARCOCPU
-+# endif
-+# define machine_is_swarcocpu() (machine_arch_type == MACH_TYPE_SWARCOCPU)
-+#else
-+# define machine_is_swarcocpu() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SWARCODSL
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SWARCODSL
-+# endif
-+# define machine_is_swarcodsl() (machine_arch_type == MACH_TYPE_SWARCODSL)
-+#else
-+# define machine_is_swarcodsl() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BLUEANGEL
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_BLUEANGEL
-+# endif
-+# define machine_is_blueangel() (machine_arch_type == MACH_TYPE_BLUEANGEL)
-+#else
-+# define machine_is_blueangel() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HAIRYGRAMA
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_HAIRYGRAMA
-+# endif
-+# define machine_is_hairygrama() (machine_arch_type == MACH_TYPE_HAIRYGRAMA)
-+#else
-+# define machine_is_hairygrama() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BANFF
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_BANFF
-+# endif
-+# define machine_is_banff() (machine_arch_type == MACH_TYPE_BANFF)
-+#else
-+# define machine_is_banff() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CARMEVA
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CARMEVA
-+# endif
-+# define machine_is_carmeva() (machine_arch_type == MACH_TYPE_CARMEVA)
-+#else
-+# define machine_is_carmeva() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SAM255
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SAM255
-+# endif
-+# define machine_is_sam255() (machine_arch_type == MACH_TYPE_SAM255)
-+#else
-+# define machine_is_sam255() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PPM10
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PPM10
-+# endif
-+# define machine_is_ppm10() (machine_arch_type == MACH_TYPE_PPM10)
-+#else
-+# define machine_is_ppm10() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EDB9315A
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_EDB9315A
-+# endif
-+# define machine_is_edb9315a() (machine_arch_type == MACH_TYPE_EDB9315A)
-+#else
-+# define machine_is_edb9315a() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SUNSET
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SUNSET
-+# endif
-+# define machine_is_sunset() (machine_arch_type == MACH_TYPE_SUNSET)
-+#else
-+# define machine_is_sunset() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_STARGATE2
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_STARGATE2
-+# endif
-+# define machine_is_stargate2() (machine_arch_type == MACH_TYPE_STARGATE2)
-+#else
-+# define machine_is_stargate2() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_INTELMOTE2
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_INTELMOTE2
-+# endif
-+# define machine_is_intelmote2() (machine_arch_type == MACH_TYPE_INTELMOTE2)
-+#else
-+# define machine_is_intelmote2() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TRIZEPS4
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_TRIZEPS4
-+# endif
-+# define machine_is_trizeps4() (machine_arch_type == MACH_TYPE_TRIZEPS4)
-+#else
-+# define machine_is_trizeps4() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MAINSTONE2
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MAINSTONE2
-+# endif
-+# define machine_is_mainstone2() (machine_arch_type == MACH_TYPE_MAINSTONE2)
-+#else
-+# define machine_is_mainstone2() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EZ_IXP42X
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_EZ_IXP42X
-+# endif
-+# define machine_is_ez_ixp42x() (machine_arch_type == MACH_TYPE_EZ_IXP42X)
-+#else
-+# define machine_is_ez_ixp42x() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TAPWAVE_ZODIAC
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_TAPWAVE_ZODIAC
-+# endif
-+# define machine_is_tapwave_zodiac() (machine_arch_type == MACH_TYPE_TAPWAVE_ZODIAC)
-+#else
-+# define machine_is_tapwave_zodiac() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_UNIVERSALMETER
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_UNIVERSALMETER
-+# endif
-+# define machine_is_universalmeter() (machine_arch_type == MACH_TYPE_UNIVERSALMETER)
-+#else
-+# define machine_is_universalmeter() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HICOARM9
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_HICOARM9
-+# endif
-+# define machine_is_hicoarm9() (machine_arch_type == MACH_TYPE_HICOARM9)
-+#else
-+# define machine_is_hicoarm9() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PNX4008
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PNX4008
-+# endif
-+# define machine_is_pnx4008() (machine_arch_type == MACH_TYPE_PNX4008)
-+#else
-+# define machine_is_pnx4008() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_KWS6000
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_KWS6000
-+# endif
-+# define machine_is_kws6000() (machine_arch_type == MACH_TYPE_KWS6000)
-+#else
-+# define machine_is_kws6000() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PORTUX920T
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PORTUX920T
-+# endif
-+# define machine_is_portux920t() (machine_arch_type == MACH_TYPE_PORTUX920T)
-+#else
-+# define machine_is_portux920t() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EZ_X5
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_EZ_X5
-+# endif
-+# define machine_is_ez_x5() (machine_arch_type == MACH_TYPE_EZ_X5)
-+#else
-+# define machine_is_ez_x5() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_RUDOLPH
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_RUDOLPH
-+# endif
-+# define machine_is_omap_rudolph() (machine_arch_type == MACH_TYPE_OMAP_RUDOLPH)
-+#else
-+# define machine_is_omap_rudolph() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CPUAT91
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CPUAT91
-+# endif
-+# define machine_is_cpuat91() (machine_arch_type == MACH_TYPE_CPUAT91)
-+#else
-+# define machine_is_cpuat91() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_REA9200
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_REA9200
-+# endif
-+# define machine_is_rea9200() (machine_arch_type == MACH_TYPE_REA9200)
-+#else
-+# define machine_is_rea9200() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ACTS_PUNE_SA1110
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ACTS_PUNE_SA1110
-+# endif
-+# define machine_is_acts_pune_sa1110() (machine_arch_type == MACH_TYPE_ACTS_PUNE_SA1110)
-+#else
-+# define machine_is_acts_pune_sa1110() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IXP425
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IXP425
-+# endif
-+# define machine_is_ixp425() (machine_arch_type == MACH_TYPE_IXP425)
-+#else
-+# define machine_is_ixp425() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ARGONPLUSODYSSEY
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ARGONPLUSODYSSEY
-+# endif
-+# define machine_is_i30030ads() (machine_arch_type == MACH_TYPE_ARGONPLUSODYSSEY)
-+#else
-+# define machine_is_i30030ads() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PERCH
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PERCH
-+# endif
-+# define machine_is_perch() (machine_arch_type == MACH_TYPE_PERCH)
-+#else
-+# define machine_is_perch() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EIS05R1
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_EIS05R1
-+# endif
-+# define machine_is_eis05r1() (machine_arch_type == MACH_TYPE_EIS05R1)
-+#else
-+# define machine_is_eis05r1() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PEPPERPAD
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PEPPERPAD
-+# endif
-+# define machine_is_pepperpad() (machine_arch_type == MACH_TYPE_PEPPERPAD)
-+#else
-+# define machine_is_pepperpad() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SB3010
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SB3010
-+# endif
-+# define machine_is_sb3010() (machine_arch_type == MACH_TYPE_SB3010)
-+#else
-+# define machine_is_sb3010() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_RM9200
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_RM9200
-+# endif
-+# define machine_is_rm9200() (machine_arch_type == MACH_TYPE_RM9200)
-+#else
-+# define machine_is_rm9200() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DMA03
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DMA03
-+# endif
-+# define machine_is_dma03() (machine_arch_type == MACH_TYPE_DMA03)
-+#else
-+# define machine_is_dma03() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ROAD_S101
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ROAD_S101
-+# endif
-+# define machine_is_road_s101() (machine_arch_type == MACH_TYPE_ROAD_S101)
-+#else
-+# define machine_is_road_s101() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IQ_NEXTGEN_A
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_A
-+# endif
-+# define machine_is_iq_nextgen_a() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_A)
-+#else
-+# define machine_is_iq_nextgen_a() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IQ_NEXTGEN_B
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_B
-+# endif
-+# define machine_is_iq_nextgen_b() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_B)
-+#else
-+# define machine_is_iq_nextgen_b() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IQ_NEXTGEN_C
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_C
-+# endif
-+# define machine_is_iq_nextgen_c() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_C)
-+#else
-+# define machine_is_iq_nextgen_c() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IQ_NEXTGEN_D
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_D
-+# endif
-+# define machine_is_iq_nextgen_d() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_D)
-+#else
-+# define machine_is_iq_nextgen_d() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IQ_NEXTGEN_E
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_E
-+# endif
-+# define machine_is_iq_nextgen_e() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_E)
-+#else
-+# define machine_is_iq_nextgen_e() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MALLOW_AT91
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MALLOW_AT91
-+# endif
-+# define machine_is_mallow_at91() (machine_arch_type == MACH_TYPE_MALLOW_AT91)
-+#else
-+# define machine_is_mallow_at91() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CYBERTRACKER_I
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CYBERTRACKER_I
-+# endif
-+# define machine_is_cybertracker_i() (machine_arch_type == MACH_TYPE_CYBERTRACKER_I)
-+#else
-+# define machine_is_cybertracker_i() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_GESBC931X
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_GESBC931X
-+# endif
-+# define machine_is_gesbc931x() (machine_arch_type == MACH_TYPE_GESBC931X)
-+#else
-+# define machine_is_gesbc931x() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CENTIPAD
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CENTIPAD
-+# endif
-+# define machine_is_centipad() (machine_arch_type == MACH_TYPE_CENTIPAD)
-+#else
-+# define machine_is_centipad() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ARMSOC
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ARMSOC
-+# endif
-+# define machine_is_armsoc() (machine_arch_type == MACH_TYPE_ARMSOC)
-+#else
-+# define machine_is_armsoc() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SE4200
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SE4200
-+# endif
-+# define machine_is_se4200() (machine_arch_type == MACH_TYPE_SE4200)
-+#else
-+# define machine_is_se4200() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EMS197A
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_EMS197A
-+# endif
-+# define machine_is_ems197a() (machine_arch_type == MACH_TYPE_EMS197A)
-+#else
-+# define machine_is_ems197a() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MICRO9
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MICRO9
-+# endif
-+# define machine_is_micro9() (machine_arch_type == MACH_TYPE_MICRO9)
-+#else
-+# define machine_is_micro9() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MICRO9L
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MICRO9L
-+# endif
-+# define machine_is_micro9l() (machine_arch_type == MACH_TYPE_MICRO9L)
-+#else
-+# define machine_is_micro9l() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_UC5471DSP
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_UC5471DSP
-+# endif
-+# define machine_is_uc5471dsp() (machine_arch_type == MACH_TYPE_UC5471DSP)
-+#else
-+# define machine_is_uc5471dsp() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SJ5471ENG
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SJ5471ENG
-+# endif
-+# define machine_is_sj5471eng() (machine_arch_type == MACH_TYPE_SJ5471ENG)
-+#else
-+# define machine_is_sj5471eng() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CMPXA26X
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CMPXA26X
-+# endif
-+# define machine_is_none() (machine_arch_type == MACH_TYPE_CMPXA26X)
-+#else
-+# define machine_is_none() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NC
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NC
-+# endif
-+# define machine_is_nc1() (machine_arch_type == MACH_TYPE_NC)
-+#else
-+# define machine_is_nc1() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_PALMTE
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_PALMTE
-+# endif
-+# define machine_is_omap_palmte() (machine_arch_type == MACH_TYPE_OMAP_PALMTE)
-+#else
-+# define machine_is_omap_palmte() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AJAX52X
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_AJAX52X
-+# endif
-+# define machine_is_ajax52x() (machine_arch_type == MACH_TYPE_AJAX52X)
-+#else
-+# define machine_is_ajax52x() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SIRIUSTAR
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SIRIUSTAR
-+# endif
-+# define machine_is_siriustar() (machine_arch_type == MACH_TYPE_SIRIUSTAR)
-+#else
-+# define machine_is_siriustar() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IODATA_HDLG
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IODATA_HDLG
-+# endif
-+# define machine_is_iodata_hdlg() (machine_arch_type == MACH_TYPE_IODATA_HDLG)
-+#else
-+# define machine_is_iodata_hdlg() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AT91RM9200UTL
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_AT91RM9200UTL
-+# endif
-+# define machine_is_at91rm9200utl() (machine_arch_type == MACH_TYPE_AT91RM9200UTL)
-+#else
-+# define machine_is_at91rm9200utl() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BIOSAFE
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_BIOSAFE
-+# endif
-+# define machine_is_biosafe() (machine_arch_type == MACH_TYPE_BIOSAFE)
-+#else
-+# define machine_is_biosafe() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MP1000
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MP1000
-+# endif
-+# define machine_is_mp1000() (machine_arch_type == MACH_TYPE_MP1000)
-+#else
-+# define machine_is_mp1000() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PARSY
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PARSY
-+# endif
-+# define machine_is_parsy() (machine_arch_type == MACH_TYPE_PARSY)
-+#else
-+# define machine_is_parsy() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CCXP
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CCXP
-+# endif
-+# define machine_is_ccxp270() (machine_arch_type == MACH_TYPE_CCXP)
-+#else
-+# define machine_is_ccxp270() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_GSAMPLE
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_GSAMPLE
-+# endif
-+# define machine_is_omap_gsample() (machine_arch_type == MACH_TYPE_OMAP_GSAMPLE)
-+#else
-+# define machine_is_omap_gsample() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_REALVIEW_EB
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_REALVIEW_EB
-+# endif
-+# define machine_is_realview_eb() (machine_arch_type == MACH_TYPE_REALVIEW_EB)
-+#else
-+# define machine_is_realview_eb() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SAMOA
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SAMOA
-+# endif
-+# define machine_is_samoa() (machine_arch_type == MACH_TYPE_SAMOA)
-+#else
-+# define machine_is_samoa() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_T3XSCALE
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_T3XSCALE
-+# endif
-+# define machine_is_t3xscale() (machine_arch_type == MACH_TYPE_T3XSCALE)
-+#else
-+# define machine_is_t3xscale() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_I878
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_I878
-+# endif
-+# define machine_is_i878() (machine_arch_type == MACH_TYPE_I878)
-+#else
-+# define machine_is_i878() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BORZOI
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_BORZOI
-+# endif
-+# define machine_is_borzoi() (machine_arch_type == MACH_TYPE_BORZOI)
-+#else
-+# define machine_is_borzoi() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_GECKO
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_GECKO
-+# endif
-+# define machine_is_gecko() (machine_arch_type == MACH_TYPE_GECKO)
-+#else
-+# define machine_is_gecko() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DS101
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DS101
-+# endif
-+# define machine_is_ds101() (machine_arch_type == MACH_TYPE_DS101)
-+#else
-+# define machine_is_ds101() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_PALMTT2
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_PALMTT2
-+# endif
-+# define machine_is_omap_palmtt2() (machine_arch_type == MACH_TYPE_OMAP_PALMTT2)
-+#else
-+# define machine_is_omap_palmtt2() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_XSCALE_PALMLD
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_XSCALE_PALMLD
-+# endif
-+# define machine_is_xscale_palmld() (machine_arch_type == MACH_TYPE_XSCALE_PALMLD)
-+#else
-+# define machine_is_xscale_palmld() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CC9C
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CC9C
-+# endif
-+# define machine_is_cc9c() (machine_arch_type == MACH_TYPE_CC9C)
-+#else
-+# define machine_is_cc9c() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SBC1670
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SBC1670
-+# endif
-+# define machine_is_sbc1670() (machine_arch_type == MACH_TYPE_SBC1670)
-+#else
-+# define machine_is_sbc1670() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IXDP28X5
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IXDP28X5
-+# endif
-+# define machine_is_ixdp28x5() (machine_arch_type == MACH_TYPE_IXDP28X5)
-+#else
-+# define machine_is_ixdp28x5() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_PALMTT
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_PALMTT
-+# endif
-+# define machine_is_omap_palmtt() (machine_arch_type == MACH_TYPE_OMAP_PALMTT)
-+#else
-+# define machine_is_omap_palmtt() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ML696K
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ML696K
-+# endif
-+# define machine_is_ml696k() (machine_arch_type == MACH_TYPE_ML696K)
-+#else
-+# define machine_is_ml696k() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ARCOM_ZEUS
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ARCOM_ZEUS
-+# endif
-+# define machine_is_arcom_zeus() (machine_arch_type == MACH_TYPE_ARCOM_ZEUS)
-+#else
-+# define machine_is_arcom_zeus() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OSIRIS
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OSIRIS
-+# endif
-+# define machine_is_osiris() (machine_arch_type == MACH_TYPE_OSIRIS)
-+#else
-+# define machine_is_osiris() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MAESTRO
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MAESTRO
-+# endif
-+# define machine_is_maestro() (machine_arch_type == MACH_TYPE_MAESTRO)
-+#else
-+# define machine_is_maestro() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TUNGE2
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_TUNGE2
-+# endif
-+# define machine_is_tunge2() (machine_arch_type == MACH_TYPE_TUNGE2)
-+#else
-+# define machine_is_tunge2() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IXBBM
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IXBBM
-+# endif
-+# define machine_is_ixbbm() (machine_arch_type == MACH_TYPE_IXBBM)
-+#else
-+# define machine_is_ixbbm() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MX27
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MX27
-+# endif
-+# define machine_is_mx27ads() (machine_arch_type == MACH_TYPE_MX27)
-+#else
-+# define machine_is_mx27ads() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AX8004
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_AX8004
-+# endif
-+# define machine_is_ax8004() (machine_arch_type == MACH_TYPE_AX8004)
-+#else
-+# define machine_is_ax8004() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AT91SAM9261EK
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_AT91SAM9261EK
-+# endif
-+# define machine_is_at91sam9261ek() (machine_arch_type == MACH_TYPE_AT91SAM9261EK)
-+#else
-+# define machine_is_at91sam9261ek() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_LOFT
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_LOFT
-+# endif
-+# define machine_is_loft() (machine_arch_type == MACH_TYPE_LOFT)
-+#else
-+# define machine_is_loft() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MAGPIE
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MAGPIE
-+# endif
-+# define machine_is_magpie() (machine_arch_type == MACH_TYPE_MAGPIE)
-+#else
-+# define machine_is_magpie() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MX21
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MX21
-+# endif
-+# define machine_is_mx21ads() (machine_arch_type == MACH_TYPE_MX21)
-+#else
-+# define machine_is_mx21ads() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MB87M3400
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MB87M3400
-+# endif
-+# define machine_is_mb87m3400() (machine_arch_type == MACH_TYPE_MB87M3400)
-+#else
-+# define machine_is_mb87m3400() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MGUARD_DELTA
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MGUARD_DELTA
-+# endif
-+# define machine_is_mguard_delta() (machine_arch_type == MACH_TYPE_MGUARD_DELTA)
-+#else
-+# define machine_is_mguard_delta() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DAVINCI_DVDP
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DAVINCI_DVDP
-+# endif
-+# define machine_is_davinci_dvdp() (machine_arch_type == MACH_TYPE_DAVINCI_DVDP)
-+#else
-+# define machine_is_davinci_dvdp() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HTCUNIVERSAL
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_HTCUNIVERSAL
-+# endif
-+# define machine_is_htcuniversal() (machine_arch_type == MACH_TYPE_HTCUNIVERSAL)
-+#else
-+# define machine_is_htcuniversal() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TPAD
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_TPAD
-+# endif
-+# define machine_is_tpad() (machine_arch_type == MACH_TYPE_TPAD)
-+#else
-+# define machine_is_tpad() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ROVERP3
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ROVERP3
-+# endif
-+# define machine_is_roverp3() (machine_arch_type == MACH_TYPE_ROVERP3)
-+#else
-+# define machine_is_roverp3() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_JORNADA928
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_JORNADA928
-+# endif
-+# define machine_is_jornada928() (machine_arch_type == MACH_TYPE_JORNADA928)
-+#else
-+# define machine_is_jornada928() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MV88FXX81
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MV88FXX81
-+# endif
-+# define machine_is_mv88fxx81() (machine_arch_type == MACH_TYPE_MV88FXX81)
-+#else
-+# define machine_is_mv88fxx81() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_STMP36XX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_STMP36XX
-+# endif
-+# define machine_is_stmp36xx() (machine_arch_type == MACH_TYPE_STMP36XX)
-+#else
-+# define machine_is_stmp36xx() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SXNI79524
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SXNI79524
-+# endif
-+# define machine_is_sxni79524() (machine_arch_type == MACH_TYPE_SXNI79524)
-+#else
-+# define machine_is_sxni79524() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AMS_DELTA
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_AMS_DELTA
-+# endif
-+# define machine_is_ams_delta() (machine_arch_type == MACH_TYPE_AMS_DELTA)
-+#else
-+# define machine_is_ams_delta() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_URANIUM
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_URANIUM
-+# endif
-+# define machine_is_uranium() (machine_arch_type == MACH_TYPE_URANIUM)
-+#else
-+# define machine_is_uranium() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_UCON
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_UCON
-+# endif
-+# define machine_is_ucon() (machine_arch_type == MACH_TYPE_UCON)
-+#else
-+# define machine_is_ucon() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NAS100D
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NAS100D
-+# endif
-+# define machine_is_nas100d() (machine_arch_type == MACH_TYPE_NAS100D)
-+#else
-+# define machine_is_nas100d() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_L083_1000
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_L083_1000
-+# endif
-+# define machine_is_l083() (machine_arch_type == MACH_TYPE_L083_1000)
-+#else
-+# define machine_is_l083() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EZX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_EZX
-+# endif
-+# define machine_is_ezx() (machine_arch_type == MACH_TYPE_EZX)
-+#else
-+# define machine_is_ezx() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PNX5220
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PNX5220
-+# endif
-+# define machine_is_pnx5220() (machine_arch_type == MACH_TYPE_PNX5220)
-+#else
-+# define machine_is_pnx5220() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BUTTE
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_BUTTE
-+# endif
-+# define machine_is_butte() (machine_arch_type == MACH_TYPE_BUTTE)
-+#else
-+# define machine_is_butte() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SRM2
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SRM2
-+# endif
-+# define machine_is_srm2() (machine_arch_type == MACH_TYPE_SRM2)
-+#else
-+# define machine_is_srm2() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DSBR
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DSBR
-+# endif
-+# define machine_is_dsbr() (machine_arch_type == MACH_TYPE_DSBR)
-+#else
-+# define machine_is_dsbr() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CRYSTALBALL
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CRYSTALBALL
-+# endif
-+# define machine_is_crystalball() (machine_arch_type == MACH_TYPE_CRYSTALBALL)
-+#else
-+# define machine_is_crystalball() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TINYPXA27X
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_TINYPXA27X
-+# endif
-+# define machine_is_tinypxa27x() (machine_arch_type == MACH_TYPE_TINYPXA27X)
-+#else
-+# define machine_is_tinypxa27x() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HERBIE
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_HERBIE
-+# endif
-+# define machine_is_herbie() (machine_arch_type == MACH_TYPE_HERBIE)
-+#else
-+# define machine_is_herbie() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MAGICIAN
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MAGICIAN
-+# endif
-+# define machine_is_magician() (machine_arch_type == MACH_TYPE_MAGICIAN)
-+#else
-+# define machine_is_magician() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CM4002
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CM4002
-+# endif
-+# define machine_is_cm4002() (machine_arch_type == MACH_TYPE_CM4002)
-+#else
-+# define machine_is_cm4002() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_B4
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_B4
-+# endif
-+# define machine_is_b4() (machine_arch_type == MACH_TYPE_B4)
-+#else
-+# define machine_is_b4() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MAUI
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MAUI
-+# endif
-+# define machine_is_maui() (machine_arch_type == MACH_TYPE_MAUI)
-+#else
-+# define machine_is_maui() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CYBERTRACKER_G
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CYBERTRACKER_G
-+# endif
-+# define machine_is_cybertracker_g() (machine_arch_type == MACH_TYPE_CYBERTRACKER_G)
-+#else
-+# define machine_is_cybertracker_g() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NXDKN
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NXDKN
-+# endif
-+# define machine_is_nxdkn() (machine_arch_type == MACH_TYPE_NXDKN)
-+#else
-+# define machine_is_nxdkn() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MIO8390
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MIO8390
-+# endif
-+# define machine_is_mio8390() (machine_arch_type == MACH_TYPE_MIO8390)
-+#else
-+# define machine_is_mio8390() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMI_BOARD
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMI_BOARD
-+# endif
-+# define machine_is_omi_board() (machine_arch_type == MACH_TYPE_OMI_BOARD)
-+#else
-+# define machine_is_omi_board() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MX21CIV
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MX21CIV
-+# endif
-+# define machine_is_mx21civ() (machine_arch_type == MACH_TYPE_MX21CIV)
-+#else
-+# define machine_is_mx21civ() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MAHI_CDAC
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MAHI_CDAC
-+# endif
-+# define machine_is_mahi_cdac() (machine_arch_type == MACH_TYPE_MAHI_CDAC)
-+#else
-+# define machine_is_mahi_cdac() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_XSCALE_PALMTX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_XSCALE_PALMTX
-+# endif
-+# define machine_is_xscale_palmtx() (machine_arch_type == MACH_TYPE_XSCALE_PALMTX)
-+#else
-+# define machine_is_xscale_palmtx() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_S3C2413
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_S3C2413
-+# endif
-+# define machine_is_s3c2413() (machine_arch_type == MACH_TYPE_S3C2413)
-+#else
-+# define machine_is_s3c2413() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SAMSYS_EP0
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SAMSYS_EP0
-+# endif
-+# define machine_is_samsys_ep0() (machine_arch_type == MACH_TYPE_SAMSYS_EP0)
-+#else
-+# define machine_is_samsys_ep0() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_WG302V1
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_WG302V1
-+# endif
-+# define machine_is_wg302v1() (machine_arch_type == MACH_TYPE_WG302V1)
-+#else
-+# define machine_is_wg302v1() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_WG302V2
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_WG302V2
-+# endif
-+# define machine_is_wg302v2() (machine_arch_type == MACH_TYPE_WG302V2)
-+#else
-+# define machine_is_wg302v2() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EB42X
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_EB42X
-+# endif
-+# define machine_is_eb42x() (machine_arch_type == MACH_TYPE_EB42X)
-+#else
-+# define machine_is_eb42x() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IQ331ES
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IQ331ES
-+# endif
-+# define machine_is_iq331es() (machine_arch_type == MACH_TYPE_IQ331ES)
-+#else
-+# define machine_is_iq331es() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_COSYDSP
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_COSYDSP
-+# endif
-+# define machine_is_cosydsp() (machine_arch_type == MACH_TYPE_COSYDSP)
-+#else
-+# define machine_is_cosydsp() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_UPLAT7D
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_UPLAT7D
-+# endif
-+# define machine_is_uplat7d_proto() (machine_arch_type == MACH_TYPE_UPLAT7D)
-+#else
-+# define machine_is_uplat7d_proto() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PTDAVINCI
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PTDAVINCI
-+# endif
-+# define machine_is_ptdavinci() (machine_arch_type == MACH_TYPE_PTDAVINCI)
-+#else
-+# define machine_is_ptdavinci() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MBUS
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MBUS
-+# endif
-+# define machine_is_mbus() (machine_arch_type == MACH_TYPE_MBUS)
-+#else
-+# define machine_is_mbus() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NADIA2VB
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NADIA2VB
-+# endif
-+# define machine_is_nadia2vb() (machine_arch_type == MACH_TYPE_NADIA2VB)
-+#else
-+# define machine_is_nadia2vb() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_R1000
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_R1000
-+# endif
-+# define machine_is_r1000() (machine_arch_type == MACH_TYPE_R1000)
-+#else
-+# define machine_is_r1000() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HW90250
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_HW90250
-+# endif
-+# define machine_is_hw90250() (machine_arch_type == MACH_TYPE_HW90250)
-+#else
-+# define machine_is_hw90250() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_2430SDP
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_2430SDP
-+# endif
-+# define machine_is_omap_2430sdp() (machine_arch_type == MACH_TYPE_OMAP_2430SDP)
-+#else
-+# define machine_is_omap_2430sdp() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DAVINCI_EVM
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DAVINCI_EVM
-+# endif
-+# define machine_is_davinci_evm() (machine_arch_type == MACH_TYPE_DAVINCI_EVM)
-+#else
-+# define machine_is_davinci_evm() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_TORNADO
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_TORNADO
-+# endif
-+# define machine_is_omap_tornado() (machine_arch_type == MACH_TYPE_OMAP_TORNADO)
-+#else
-+# define machine_is_omap_tornado() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OLOCREEK
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OLOCREEK
-+# endif
-+# define machine_is_olocreek() (machine_arch_type == MACH_TYPE_OLOCREEK)
-+#else
-+# define machine_is_olocreek() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PALMZ72
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PALMZ72
-+# endif
-+# define machine_is_palmz72() (machine_arch_type == MACH_TYPE_PALMZ72)
-+#else
-+# define machine_is_palmz72() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NXDB500
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NXDB500
-+# endif
-+# define machine_is_nxdb500() (machine_arch_type == MACH_TYPE_NXDB500)
-+#else
-+# define machine_is_nxdb500() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_APF9328
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_APF9328
-+# endif
-+# define machine_is_apf9328() (machine_arch_type == MACH_TYPE_APF9328)
-+#else
-+# define machine_is_apf9328() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_WIPOQ
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_WIPOQ
-+# endif
-+# define machine_is_omap_wipoq() (machine_arch_type == MACH_TYPE_OMAP_WIPOQ)
-+#else
-+# define machine_is_omap_wipoq() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_TWIP
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_TWIP
-+# endif
-+# define machine_is_omap_twip() (machine_arch_type == MACH_TYPE_OMAP_TWIP)
-+#else
-+# define machine_is_omap_twip() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_XSCALE_PALMTREO650
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_XSCALE_PALMTREO650
-+# endif
-+# define machine_is_xscale_treo650() (machine_arch_type == MACH_TYPE_XSCALE_PALMTREO650)
-+#else
-+# define machine_is_xscale_treo650() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ACUMEN
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ACUMEN
-+# endif
-+# define machine_is_acumen() (machine_arch_type == MACH_TYPE_ACUMEN)
-+#else
-+# define machine_is_acumen() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_XP100
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_XP100
-+# endif
-+# define machine_is_xp100() (machine_arch_type == MACH_TYPE_XP100)
-+#else
-+# define machine_is_xp100() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_FS2410
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_FS2410
-+# endif
-+# define machine_is_fs2410() (machine_arch_type == MACH_TYPE_FS2410)
-+#else
-+# define machine_is_fs2410() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PXA270_CERF
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PXA270_CERF
-+# endif
-+# define machine_is_pxa270_cerf() (machine_arch_type == MACH_TYPE_PXA270_CERF)
-+#else
-+# define machine_is_pxa270_cerf() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SQ2FTLPALM
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SQ2FTLPALM
-+# endif
-+# define machine_is_sq2ftlpalm() (machine_arch_type == MACH_TYPE_SQ2FTLPALM)
-+#else
-+# define machine_is_sq2ftlpalm() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BSEMSERVER
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_BSEMSERVER
-+# endif
-+# define machine_is_bsemserver() (machine_arch_type == MACH_TYPE_BSEMSERVER)
-+#else
-+# define machine_is_bsemserver() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NETCLIENT
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NETCLIENT
-+# endif
-+# define machine_is_netclient() (machine_arch_type == MACH_TYPE_NETCLIENT)
-+#else
-+# define machine_is_netclient() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_XSCALE_PALMTT5
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_XSCALE_PALMTT5
-+# endif
-+# define machine_is_xscale_palmtt5() (machine_arch_type == MACH_TYPE_XSCALE_PALMTT5)
-+#else
-+# define machine_is_xscale_palmtt5() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_PALMTC
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_PALMTC
-+# endif
-+# define machine_is_xscale_palmtc() (machine_arch_type == MACH_TYPE_OMAP_PALMTC)
-+#else
-+# define machine_is_xscale_palmtc() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_APOLLON
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_APOLLON
-+# endif
-+# define machine_is_omap_apollon() (machine_arch_type == MACH_TYPE_OMAP_APOLLON)
-+#else
-+# define machine_is_omap_apollon() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ARGONLVEVB
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ARGONLVEVB
-+# endif
-+# define machine_is_mxc30030evb() (machine_arch_type == MACH_TYPE_ARGONLVEVB)
-+#else
-+# define machine_is_mxc30030evb() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_REA_2D
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_REA_2D
-+# endif
-+# define machine_is_rea_2d() (machine_arch_type == MACH_TYPE_REA_2D)
-+#else
-+# define machine_is_rea_2d() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TI3E524
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_TI3E524
-+# endif
-+# define machine_is_eti3e524() (machine_arch_type == MACH_TYPE_TI3E524)
-+#else
-+# define machine_is_eti3e524() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ATEB9200
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ATEB9200
-+# endif
-+# define machine_is_ateb9200() (machine_arch_type == MACH_TYPE_ATEB9200)
-+#else
-+# define machine_is_ateb9200() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AUCKLAND
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_AUCKLAND
-+# endif
-+# define machine_is_auckland() (machine_arch_type == MACH_TYPE_AUCKLAND)
-+#else
-+# define machine_is_auckland() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AK3320M
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_AK3320M
-+# endif
-+# define machine_is_ak3220m() (machine_arch_type == MACH_TYPE_AK3320M)
-+#else
-+# define machine_is_ak3220m() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DURAMAX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DURAMAX
-+# endif
-+# define machine_is_duramax() (machine_arch_type == MACH_TYPE_DURAMAX)
-+#else
-+# define machine_is_duramax() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_N35
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_N35
-+# endif
-+# define machine_is_n35() (machine_arch_type == MACH_TYPE_N35)
-+#else
-+# define machine_is_n35() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PRONGHORN
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PRONGHORN
-+# endif
-+# define machine_is_pronghorn() (machine_arch_type == MACH_TYPE_PRONGHORN)
-+#else
-+# define machine_is_pronghorn() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_FUNDY
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_FUNDY
-+# endif
-+# define machine_is_fundy() (machine_arch_type == MACH_TYPE_FUNDY)
-+#else
-+# define machine_is_fundy() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_LOGICPD_PXA270
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_LOGICPD_PXA270
-+# endif
-+# define machine_is_logicpd_pxa270() (machine_arch_type == MACH_TYPE_LOGICPD_PXA270)
-+#else
-+# define machine_is_logicpd_pxa270() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CPU777
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CPU777
-+# endif
-+# define machine_is_cpu777() (machine_arch_type == MACH_TYPE_CPU777)
-+#else
-+# define machine_is_cpu777() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SIMICON9201
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SIMICON9201
-+# endif
-+# define machine_is_simicon9201() (machine_arch_type == MACH_TYPE_SIMICON9201)
-+#else
-+# define machine_is_simicon9201() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_LEAP2_HPM
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_LEAP2_HPM
-+# endif
-+# define machine_is_leap2_hpm() (machine_arch_type == MACH_TYPE_LEAP2_HPM)
-+#else
-+# define machine_is_leap2_hpm() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CM922TXA10
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CM922TXA10
-+# endif
-+# define machine_is_cm922txa10() (machine_arch_type == MACH_TYPE_CM922TXA10)
-+#else
-+# define machine_is_cm922txa10() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PXA
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PXA
-+# endif
-+# define machine_is_sandgate() (machine_arch_type == MACH_TYPE_PXA)
-+#else
-+# define machine_is_sandgate() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SANDGATE2
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SANDGATE2
-+# endif
-+# define machine_is_sandgate2() (machine_arch_type == MACH_TYPE_SANDGATE2)
-+#else
-+# define machine_is_sandgate2() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SANDGATE2G
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SANDGATE2G
-+# endif
-+# define machine_is_sandgate2g() (machine_arch_type == MACH_TYPE_SANDGATE2G)
-+#else
-+# define machine_is_sandgate2g() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SANDGATE2P
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SANDGATE2P
-+# endif
-+# define machine_is_sandgate2p() (machine_arch_type == MACH_TYPE_SANDGATE2P)
-+#else
-+# define machine_is_sandgate2p() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_FRED_JACK
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_FRED_JACK
-+# endif
-+# define machine_is_fred_jack() (machine_arch_type == MACH_TYPE_FRED_JACK)
-+#else
-+# define machine_is_fred_jack() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TTG_COLOR1
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_TTG_COLOR1
-+# endif
-+# define machine_is_ttg_color1() (machine_arch_type == MACH_TYPE_TTG_COLOR1)
-+#else
-+# define machine_is_ttg_color1() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NXEB500HMI
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NXEB500HMI
-+# endif
-+# define machine_is_nxeb500hmi() (machine_arch_type == MACH_TYPE_NXEB500HMI)
-+#else
-+# define machine_is_nxeb500hmi() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NETDCU8
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NETDCU8
-+# endif
-+# define machine_is_netdcu8() (machine_arch_type == MACH_TYPE_NETDCU8)
-+#else
-+# define machine_is_netdcu8() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ML675050_CPU_BOA
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ML675050_CPU_BOA
-+# endif
-+# define machine_is_ml675050_cpu_boa() (machine_arch_type == MACH_TYPE_ML675050_CPU_BOA)
-+#else
-+# define machine_is_ml675050_cpu_boa() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NG_FVX538
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NG_FVX538
-+# endif
-+# define machine_is_ng_fvx538() (machine_arch_type == MACH_TYPE_NG_FVX538)
-+#else
-+# define machine_is_ng_fvx538() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NG_FVS338
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NG_FVS338
-+# endif
-+# define machine_is_ng_fvs338() (machine_arch_type == MACH_TYPE_NG_FVS338)
-+#else
-+# define machine_is_ng_fvs338() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PNX4103
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PNX4103
-+# endif
-+# define machine_is_pnx4103() (machine_arch_type == MACH_TYPE_PNX4103)
-+#else
-+# define machine_is_pnx4103() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HESDB
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_HESDB
-+# endif
-+# define machine_is_hesdb() (machine_arch_type == MACH_TYPE_HESDB)
-+#else
-+# define machine_is_hesdb() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_XSILO
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_XSILO
-+# endif
-+# define machine_is_xsilo() (machine_arch_type == MACH_TYPE_XSILO)
-+#else
-+# define machine_is_xsilo() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ESPRESSO
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ESPRESSO
-+# endif
-+# define machine_is_espresso() (machine_arch_type == MACH_TYPE_ESPRESSO)
-+#else
-+# define machine_is_espresso() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EMLC
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_EMLC
-+# endif
-+# define machine_is_emlc() (machine_arch_type == MACH_TYPE_EMLC)
-+#else
-+# define machine_is_emlc() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SISTERON
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SISTERON
-+# endif
-+# define machine_is_sisteron() (machine_arch_type == MACH_TYPE_SISTERON)
-+#else
-+# define machine_is_sisteron() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_RX1950
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_RX1950
-+# endif
-+# define machine_is_rx1950() (machine_arch_type == MACH_TYPE_RX1950)
-+#else
-+# define machine_is_rx1950() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TSC_VENUS
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_TSC_VENUS
-+# endif
-+# define machine_is_tsc_venus() (machine_arch_type == MACH_TYPE_TSC_VENUS)
-+#else
-+# define machine_is_tsc_venus() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DS101J
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DS101J
-+# endif
-+# define machine_is_ds101j() (machine_arch_type == MACH_TYPE_DS101J)
-+#else
-+# define machine_is_ds101j() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MXC30030ADS
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MXC30030ADS
-+# endif
-+# define machine_is_mxc30030ads() (machine_arch_type == MACH_TYPE_MXC30030ADS)
-+#else
-+# define machine_is_mxc30030ads() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_FUJITSU_WIMAXSOC
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_FUJITSU_WIMAXSOC
-+# endif
-+# define machine_is_fujitsu_wimaxsoc() (machine_arch_type == MACH_TYPE_FUJITSU_WIMAXSOC)
-+#else
-+# define machine_is_fujitsu_wimaxsoc() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DUALPCMODEM
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DUALPCMODEM
-+# endif
-+# define machine_is_dualpcmodem() (machine_arch_type == MACH_TYPE_DUALPCMODEM)
-+#else
-+# define machine_is_dualpcmodem() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_GESBC9312
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_GESBC9312
-+# endif
-+# define machine_is_gesbc9312() (machine_arch_type == MACH_TYPE_GESBC9312)
-+#else
-+# define machine_is_gesbc9312() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HTCAPACHE
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_HTCAPACHE
-+# endif
-+# define machine_is_htcapache() (machine_arch_type == MACH_TYPE_HTCAPACHE)
-+#else
-+# define machine_is_htcapache() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IXDP435
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IXDP435
-+# endif
-+# define machine_is_ixdp435() (machine_arch_type == MACH_TYPE_IXDP435)
-+#else
-+# define machine_is_ixdp435() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CATPROVT100
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CATPROVT100
-+# endif
-+# define machine_is_catprovt100() (machine_arch_type == MACH_TYPE_CATPROVT100)
-+#else
-+# define machine_is_catprovt100() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PICOTUX1XX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PICOTUX1XX
-+# endif
-+# define machine_is_picotux1xx() (machine_arch_type == MACH_TYPE_PICOTUX1XX)
-+#else
-+# define machine_is_picotux1xx() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PICOTUX2XX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PICOTUX2XX
-+# endif
-+# define machine_is_picotux2xx() (machine_arch_type == MACH_TYPE_PICOTUX2XX)
-+#else
-+# define machine_is_picotux2xx() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DSMG600
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DSMG600
-+# endif
-+# define machine_is_dsmg600() (machine_arch_type == MACH_TYPE_DSMG600)
-+#else
-+# define machine_is_dsmg600() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EMPC2
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_EMPC2
-+# endif
-+# define machine_is_empc2() (machine_arch_type == MACH_TYPE_EMPC2)
-+#else
-+# define machine_is_empc2() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_VENTURA
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_VENTURA
-+# endif
-+# define machine_is_ventura() (machine_arch_type == MACH_TYPE_VENTURA)
-+#else
-+# define machine_is_ventura() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PHIDGET_SBC
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PHIDGET_SBC
-+# endif
-+# define machine_is_phidget_sbc() (machine_arch_type == MACH_TYPE_PHIDGET_SBC)
-+#else
-+# define machine_is_phidget_sbc() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IJ3K
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IJ3K
-+# endif
-+# define machine_is_ij3k() (machine_arch_type == MACH_TYPE_IJ3K)
-+#else
-+# define machine_is_ij3k() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PISGAH
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PISGAH
-+# endif
-+# define machine_is_pisgah() (machine_arch_type == MACH_TYPE_PISGAH)
-+#else
-+# define machine_is_pisgah() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_FSAMPLE
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_FSAMPLE
-+# endif
-+# define machine_is_omap_fsample() (machine_arch_type == MACH_TYPE_OMAP_FSAMPLE)
-+#else
-+# define machine_is_omap_fsample() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SG720
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SG720
-+# endif
-+# define machine_is_sg720() (machine_arch_type == MACH_TYPE_SG720)
-+#else
-+# define machine_is_sg720() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_REDFOX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_REDFOX
-+# endif
-+# define machine_is_redfox() (machine_arch_type == MACH_TYPE_REDFOX)
-+#else
-+# define machine_is_redfox() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MYSH_EP9315_1
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MYSH_EP9315_1
-+# endif
-+# define machine_is_mysh_ep9315_1() (machine_arch_type == MACH_TYPE_MYSH_EP9315_1)
-+#else
-+# define machine_is_mysh_ep9315_1() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TPF106
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_TPF106
-+# endif
-+# define machine_is_tpf106() (machine_arch_type == MACH_TYPE_TPF106)
-+#else
-+# define machine_is_tpf106() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AT91RM9200KG
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_AT91RM9200KG
-+# endif
-+# define machine_is_at91rm9200kg() (machine_arch_type == MACH_TYPE_AT91RM9200KG)
-+#else
-+# define machine_is_at91rm9200kg() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SLEDB
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SLEDB
-+# endif
-+# define machine_is_racemt2() (machine_arch_type == MACH_TYPE_SLEDB)
-+#else
-+# define machine_is_racemt2() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ONTRACK
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ONTRACK
-+# endif
-+# define machine_is_ontrack() (machine_arch_type == MACH_TYPE_ONTRACK)
-+#else
-+# define machine_is_ontrack() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PM1200
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PM1200
-+# endif
-+# define machine_is_pm1200() (machine_arch_type == MACH_TYPE_PM1200)
-+#else
-+# define machine_is_pm1200() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ESS24XXX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ESS24XXX
-+# endif
-+# define machine_is_ess24562() (machine_arch_type == MACH_TYPE_ESS24XXX)
-+#else
-+# define machine_is_ess24562() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_COREMP7
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_COREMP7
-+# endif
-+# define machine_is_coremp7() (machine_arch_type == MACH_TYPE_COREMP7)
-+#else
-+# define machine_is_coremp7() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NEXCODER_6446
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NEXCODER_6446
-+# endif
-+# define machine_is_nexcoder_6446() (machine_arch_type == MACH_TYPE_NEXCODER_6446)
-+#else
-+# define machine_is_nexcoder_6446() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_STVC8380
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_STVC8380
-+# endif
-+# define machine_is_stvc8380() (machine_arch_type == MACH_TYPE_STVC8380)
-+#else
-+# define machine_is_stvc8380() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_TEKLYNX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_TEKLYNX
-+# endif
-+# define machine_is_teklynx() (machine_arch_type == MACH_TYPE_TEKLYNX)
-+#else
-+# define machine_is_teklynx() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CARBONADO
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CARBONADO
-+# endif
-+# define machine_is_carbonado() (machine_arch_type == MACH_TYPE_CARBONADO)
-+#else
-+# define machine_is_carbonado() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SYSMOS_MP730
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SYSMOS_MP730
-+# endif
-+# define machine_is_sysmos_mp730() (machine_arch_type == MACH_TYPE_SYSMOS_MP730)
-+#else
-+# define machine_is_sysmos_mp730() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SNAPPER_CL15
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SNAPPER_CL15
-+# endif
-+# define machine_is_snapper_cl15() (machine_arch_type == MACH_TYPE_SNAPPER_CL15)
-+#else
-+# define machine_is_snapper_cl15() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PGIGIM
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PGIGIM
-+# endif
-+# define machine_is_pgigim() (machine_arch_type == MACH_TYPE_PGIGIM)
-+#else
-+# define machine_is_pgigim() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PTX9160P2
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PTX9160P2
-+# endif
-+# define machine_is_ptx9160p2() (machine_arch_type == MACH_TYPE_PTX9160P2)
-+#else
-+# define machine_is_ptx9160p2() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DCORE1
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DCORE1
-+# endif
-+# define machine_is_dcore1() (machine_arch_type == MACH_TYPE_DCORE1)
-+#else
-+# define machine_is_dcore1() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_VICTORPXA
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_VICTORPXA
-+# endif
-+# define machine_is_victorpxa() (machine_arch_type == MACH_TYPE_VICTORPXA)
-+#else
-+# define machine_is_victorpxa() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MX2DTB
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MX2DTB
-+# endif
-+# define machine_is_mx2dtb() (machine_arch_type == MACH_TYPE_MX2DTB)
-+#else
-+# define machine_is_mx2dtb() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PXA_IREX_ER0100
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PXA_IREX_ER0100
-+# endif
-+# define machine_is_pxa_irex_er0100() (machine_arch_type == MACH_TYPE_PXA_IREX_ER0100)
-+#else
-+# define machine_is_pxa_irex_er0100() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_PALMZ71
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_PALMZ71
-+# endif
-+# define machine_is_omap_palmz71() (machine_arch_type == MACH_TYPE_OMAP_PALMZ71)
-+#else
-+# define machine_is_omap_palmz71() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BARTEC_DEG
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_BARTEC_DEG
-+# endif
-+# define machine_is_bartec_deg() (machine_arch_type == MACH_TYPE_BARTEC_DEG)
-+#else
-+# define machine_is_bartec_deg() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HW50251
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_HW50251
-+# endif
-+# define machine_is_hw50251() (machine_arch_type == MACH_TYPE_HW50251)
-+#else
-+# define machine_is_hw50251() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IBOX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IBOX
-+# endif
-+# define machine_is_ibox() (machine_arch_type == MACH_TYPE_IBOX)
-+#else
-+# define machine_is_ibox() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ATLASLH7A404
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ATLASLH7A404
-+# endif
-+# define machine_is_atlaslh7a404() (machine_arch_type == MACH_TYPE_ATLASLH7A404)
-+#else
-+# define machine_is_atlaslh7a404() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PT2026
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PT2026
-+# endif
-+# define machine_is_pt2026() (machine_arch_type == MACH_TYPE_PT2026)
-+#else
-+# define machine_is_pt2026() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HTCALPINE
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_HTCALPINE
-+# endif
-+# define machine_is_htcalpine() (machine_arch_type == MACH_TYPE_HTCALPINE)
-+#else
-+# define machine_is_htcalpine() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BARTEC_VTU
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_BARTEC_VTU
-+# endif
-+# define machine_is_bartec_vtu() (machine_arch_type == MACH_TYPE_BARTEC_VTU)
-+#else
-+# define machine_is_bartec_vtu() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_VCOREII
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_VCOREII
-+# endif
-+# define machine_is_vcoreii() (machine_arch_type == MACH_TYPE_VCOREII)
-+#else
-+# define machine_is_vcoreii() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_PDNB3
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_PDNB3
-+# endif
-+# define machine_is_pdnb3() (machine_arch_type == MACH_TYPE_PDNB3)
-+#else
-+# define machine_is_pdnb3() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_HTCBEETLES
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_HTCBEETLES
-+# endif
-+# define machine_is_htcbeetles() (machine_arch_type == MACH_TYPE_HTCBEETLES)
-+#else
-+# define machine_is_htcbeetles() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_S3C6400
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_S3C6400
-+# endif
-+# define machine_is_s3c6400() (machine_arch_type == MACH_TYPE_S3C6400)
-+#else
-+# define machine_is_s3c6400() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_S3C2443
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_S3C2443
-+# endif
-+# define machine_is_s3c2443() (machine_arch_type == MACH_TYPE_S3C2443)
-+#else
-+# define machine_is_s3c2443() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OMAP_LDK
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OMAP_LDK
-+# endif
-+# define machine_is_omap_ldk() (machine_arch_type == MACH_TYPE_OMAP_LDK)
-+#else
-+# define machine_is_omap_ldk() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SMDK2460
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SMDK2460
-+# endif
-+# define machine_is_smdk2460() (machine_arch_type == MACH_TYPE_SMDK2460)
-+#else
-+# define machine_is_smdk2460() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SMDK2440
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SMDK2440
-+# endif
-+# define machine_is_smdk2440() (machine_arch_type == MACH_TYPE_SMDK2440)
-+#else
-+# define machine_is_smdk2440() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SMDK2412
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SMDK2412
-+# endif
-+# define machine_is_smdk2412() (machine_arch_type == MACH_TYPE_SMDK2412)
-+#else
-+# define machine_is_smdk2412() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_WEBBOX
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_WEBBOX
-+# endif
-+# define machine_is_webbox() (machine_arch_type == MACH_TYPE_WEBBOX)
-+#else
-+# define machine_is_webbox() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CWWNDP
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CWWNDP
-+# endif
-+# define machine_is_cwwndp() (machine_arch_type == MACH_TYPE_CWWNDP)
-+#else
-+# define machine_is_cwwndp() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DRAGON
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DRAGON
-+# endif
-+# define machine_is_dragon() (machine_arch_type == MACH_TYPE_DRAGON)
-+#else
-+# define machine_is_dragon() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_OPENDO_CPU_BOARD
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_OPENDO_CPU_BOARD
-+# endif
-+# define machine_is_opendo_cpu_board() (machine_arch_type == MACH_TYPE_OPENDO_CPU_BOARD)
-+#else
-+# define machine_is_opendo_cpu_board() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CCM2200
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CCM2200
-+# endif
-+# define machine_is_ccm2200() (machine_arch_type == MACH_TYPE_CCM2200)
-+#else
-+# define machine_is_ccm2200() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_ETWARM
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_ETWARM
-+# endif
-+# define machine_is_etwarm() (machine_arch_type == MACH_TYPE_ETWARM)
-+#else
-+# define machine_is_etwarm() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_M93030
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_M93030
-+# endif
-+# define machine_is_m93030() (machine_arch_type == MACH_TYPE_M93030)
-+#else
-+# define machine_is_m93030() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_CC7U
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_CC7U
-+# endif
-+# define machine_is_cc7u() (machine_arch_type == MACH_TYPE_CC7U)
-+#else
-+# define machine_is_cc7u() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_MTT_RANGER
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_MTT_RANGER
-+# endif
-+# define machine_is_mtt_ranger() (machine_arch_type == MACH_TYPE_MTT_RANGER)
-+#else
-+# define machine_is_mtt_ranger() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_NEXUS
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_NEXUS
-+# endif
-+# define machine_is_nexus() (machine_arch_type == MACH_TYPE_NEXUS)
-+#else
-+# define machine_is_nexus() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_DESMAN
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_DESMAN
-+# endif
-+# define machine_is_desman() (machine_arch_type == MACH_TYPE_DESMAN)
-+#else
-+# define machine_is_desman() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BKDE303
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_BKDE303
-+# endif
-+# define machine_is_bkde303() (machine_arch_type == MACH_TYPE_BKDE303)
-+#else
-+# define machine_is_bkde303() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SMDK2413
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SMDK2413
-+# endif
-+# define machine_is_smdk2413() (machine_arch_type == MACH_TYPE_SMDK2413)
-+#else
-+# define machine_is_smdk2413() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AML_M7200
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_AML_M7200
-+# endif
-+# define machine_is_aml_m7200() (machine_arch_type == MACH_TYPE_AML_M7200)
-+#else
-+# define machine_is_aml_m7200() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AML_M5900
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_AML_M5900
-+# endif
-+# define machine_is_aml_m5900() (machine_arch_type == MACH_TYPE_AML_M5900)
-+#else
-+# define machine_is_aml_m5900() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_SG640
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_SG640
-+# endif
-+# define machine_is_sg640() (machine_arch_type == MACH_TYPE_SG640)
-+#else
-+# define machine_is_sg640() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_EDG79524
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_EDG79524
-+# endif
-+# define machine_is_edg79524() (machine_arch_type == MACH_TYPE_EDG79524)
-+#else
-+# define machine_is_edg79524() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_AI2410
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_AI2410
-+# endif
-+# define machine_is_ai2410() (machine_arch_type == MACH_TYPE_AI2410)
-+#else
-+# define machine_is_ai2410() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_IXP465
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_IXP465
-+# endif
-+# define machine_is_ixp465() (machine_arch_type == MACH_TYPE_IXP465)
-+#else
-+# define machine_is_ixp465() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_BALLOON3
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_BALLOON3
-+# endif
-+# define machine_is_balloon3() (machine_arch_type == MACH_TYPE_BALLOON3)
-+#else
-+# define machine_is_balloon3() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_QT2410
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_QT2410
-+# endif
-+# define machine_is_qt2410() (machine_arch_type == MACH_TYPE_QT2410)
-+#else
-+# define machine_is_qt2410() (0)
-+#endif
-+
-+#ifdef CONFIG_MACH_GTA01
-+# ifdef machine_arch_type
-+# undef machine_arch_type
-+# define machine_arch_type __machine_arch_type
-+# else
-+# define machine_arch_type MACH_TYPE_GTA01
-+# endif
-+# define machine_is_gta01() (machine_arch_type == MACH_TYPE_GTA01)
-+#else
-+# define machine_is_gta01() (0)
-+#endif
-+
-+
- /*
- * These have not yet been registered
- */
-Index: git/include/configs/gta01.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ git/include/configs/gta01.h 2007-01-04 12:21:18.000000000 +0100
-@@ -0,0 +1,233 @@
-+/*
-+ * (C) Copyright 2006 Harald Welte <hwelte at hmw-consulting.de>
-+ *
-+ * Configuation settings for the FIC GTA01 Linux GSM phone
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+/* we want to start u-boot directly from within NAND flash */
-+#define CONFIG_S3C2410_NAND_BOOT 1
-+
-+/*
-+ * High Level Configuration Options
-+ * (easy to change)
-+ */
-+#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-+#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */
-+#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */
-+
-+/* input clock of PLL */
-+#define CONFIG_SYS_CLK_FREQ 12000000/* the GTA01 has 12MHz input clock */
-+
-+
-+#define USE_920T_MMU 1
-+#define CONFIG_USE_IRQ 1
-+
-+/*
-+ * Size of malloc() pool
-+ */
-+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
-+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-+
-+/*
-+ * Hardware drivers
-+ */
-+
-+/*
-+ * select serial console configuration
-+ */
-+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on GTA01 */
-+//#define CONFIG_HWFLOW 1
-+
-+/************************************************************
-+ * RTC
-+ ************************************************************/
-+#define CONFIG_RTC_S3C24X0 1
-+
-+/* allow to overwrite serial and ethaddr */
-+#define CONFIG_ENV_OVERWRITE
-+
-+#define CONFIG_BAUDRATE 115200
-+
-+/***********************************************************
-+ * Command definition
-+ ***********************************************************/
-+#define CONFIG_COMMANDS (\
-+ CFG_CMD_BDI | \
-+ CFG_CMD_LOADS | \
-+ CFG_CMD_LAODB | \
-+ CFG_CMD_IMI | \
-+ CFG_CMD_CACHE | \
-+ CFG_CMD_MEMORY | \
-+ CFG_CMD_ENV | \
-+ /* CFG_CMD_IRQ | */ \
-+ CFG_CMD_BOOTD | \
-+ CFG_CMD_CONSOLE | \
-+ CFG_CMD_ASKENV | \
-+ CFG_CMD_RUN | \
-+ CFG_CMD_ECHO | \
-+ CFG_CMD_I2C | \
-+ CFG_CMD_REGINFO | \
-+ CFG_CMD_IMMAP | \
-+ CFG_CMD_DATE | \
-+ CFG_CMD_AUTOSCRIPT | \
-+ CFG_CMD_BSP | \
-+ CFG_CMD_ELF | \
-+ CFG_CMD_MISC | \
-+ CFG_CMD_USB | \
-+ CFG_CMD_JFFS2 | \
-+ CFG_CMD_DIAG | \
-+ /* CFG_CMD_HWFLOW | */ \
-+ CFG_CMD_SAVES | \
-+ CFG_CMD_NAND | \
-+ CFG_CMD_PORTIO | \
-+ CFG_CMD_MMC | \
-+ CFG_CMD_FAT | \
-+ CFG_CMD_EXT2 | \
-+ 0)
-+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-+#include <cmd_confdefs.h>
-+
-+#define CONFIG_BOOTDELAY 3
-+#define CONFIG_BOOTARGS "rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8"
-+#define CONFIG_BOOTCOMMAND "nand read 0x32000000 0x34000 0x200000; bootm 0x32000000"
-+
-+#define CONFIG_DOS_PARTITION 1
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-+/* what's this ? it's not used anywhere */
-+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-+#endif
-+
-+/*
-+ * Miscellaneous configurable options
-+ */
-+#define CFG_LONGHELP /* undef to save memory */
-+#define CFG_PROMPT "GTA01 # " /* Monitor Command Prompt */
-+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-+#define CFG_MAXARGS 16 /* max number of command args */
-+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-+
-+#define CFG_MEMTEST_START 0x30000000 /* memtest works on */
-+#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */
-+
-+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-+
-+#define CFG_LOAD_ADDR 0x33000000 /* default load address */
-+
-+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
-+/* it to wrap 100 times (total 1562500) to get 1 sec. */
-+#define CFG_HZ 1562500
-+
-+/* valid baudrates */
-+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-+
-+/*-----------------------------------------------------------------------
-+ * Stack sizes
-+ *
-+ * The stack sizes are set up in start.S using the settings below
-+ */
-+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-+#ifdef CONFIG_USE_IRQ
-+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-+#endif
-+
-+#define CONFIG_USB_OHCI 1
-+
-+/*-----------------------------------------------------------------------
-+ * Physical Memory Map
-+ */
-+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-+#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */
-+#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-+#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */
-+
-+/*-----------------------------------------------------------------------
-+ * FLASH and environment organization
-+ */
-+
-+/* No NOR flash in this device */
-+#define CFG_NO_FLASH 1
-+
-+#define CFG_ENV_IS_IN_NAND 1
-+#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */
-+#define CFG_ENV_OFFSET 0x30000 /* environment after bootloader */
-+
-+#define NAND_MAX_CHIPS 1
-+#define CFG_NAND_BASE 0x4e000000
-+#define CFG_MAX_NAND_DEVICE 1
-+
-+#define CONFIG_MMC 1
-+#define CFG_MMC_BASE 0xff000000
-+
-+/* EXT2 driver */
-+#define CONFIG_EXT2 1
-+
-+#if 0
-+/* FAT driver in u-boot is broken currently */
-+#define CONFIG_FAT 1
-+#define CONFIG_SUPPORT_VFAT 1
-+#endif
-+
-+/* JFFS2 driver */
-+#define CONFIG_JFFS2_CMDLINE 1
-+#define CONFIG_JFFS2_NAND 1
-+#define CONFIG_JFFS2_NAND_DEV 0
-+#define CONFIG_JFFS2_NAND_OFF 0x634000
-+#define CONFIG_JFFS2_NAND_SIZE 0x39cc000
-+
-+/* ATAG configuration */
-+#define CONFIG_INITRD_TAG 1
-+#define CONFIG_SETUP_MEMORY_TAGS 1
-+#define CONFIG_CMDLINE_TAG 1
-+#define CONFIG_REVISION_TAG 1
-+#if 0
-+#define CONFIG_SERIAL_TAG 1
-+#endif
-+
-+#define CONFIG_DRIVER_S3C24X0_I2C 1
-+#define CONFIG_HARD_I2C 1
-+#define CFG_I2C_SPEED 400000 /* 400kHz according to PCF50606 data sheet */
-+#define CFG_I2C_SLAVE 0x7f
-+
-+/* we have a board_late_init() function */
-+#define BOARD_LATE_INIT 1
-+
-+#if 0
-+#define CONFIG_VIDEO
-+#define CONFIG_VIDEO_S3C2410
-+#define CONFIG_CFB_CONSOLE
-+#define CONFIG_VIDEO_LOGO
-+#define CONFIG_VGA_AS_SINGLE_DEVICE
-+
-+#define VIDEO_KBD_INIT_FCT 0
-+#define VIDEO_TSTC_FCT serial_tstc
-+#define VIDEO_GETC_FCT serial_getc
-+
-+#define LCD_VIDEO_ADDR 0x33d00000
-+#endif
-+
-+#endif /* __CONFIG_H */
-Index: git/include/configs/qt2410.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ git/include/configs/qt2410.h 2007-01-04 12:21:18.000000000 +0100
-@@ -0,0 +1,245 @@
-+/*
-+ * (C) Copyright 2002
-+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-+ * Marius Groeger <mgroeger at sysgo.de>
-+ * Gary Jennejohn <gj at denx.de>
-+ * David Mueller <d.mueller at elsoft.ch>
-+ *
-+ * Configuation settings for the SAMSUNG SMDK2410 board.
-+ *
-+ * See file CREDITS for list of people who contributed to this
-+ * project.
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#ifndef __CONFIG_H
-+#define __CONFIG_H
-+
-+#if 1
-+/* If we want to start u-boot from usb bootloader in NOR flash */
-+#define CONFIG_SKIP_RELOCATE_UBOOT 1
-+#define CONFIG_SKIP_LOWLEVEL_INIT 1
-+#else
-+/* If we want to start u-boot directly from within NAND flash */
-+#define CONFIG_S3C2410_NAND_BOOT 1
-+#endif
-+
-+/*
-+ * High Level Configuration Options
-+ * (easy to change)
-+ */
-+#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-+#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */
-+#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */
-+
-+/* input clock of PLL */
-+#define CONFIG_SYS_CLK_FREQ 12000000/* the SMDK2410 has 12MHz input clock */
-+
-+
-+#define USE_920T_MMU 1
-+#define CONFIG_USE_IRQ 1
-+//#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-+
-+/*
-+ * Size of malloc() pool
-+ */
-+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
-+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
-+
-+/*
-+ * Hardware drivers
-+ */
-+#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */
-+#define CS8900_BASE 0x19000300
-+#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */
-+
-+/*
-+ * select serial console configuration
-+ */
-+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SMDK2410 */
-+#define CONFIG_HWFLOW 1
-+
-+/************************************************************
-+ * RTC
-+ ************************************************************/
-+#define CONFIG_RTC_S3C24X0 1
-+
-+/* allow to overwrite serial and ethaddr */
-+#define CONFIG_ENV_OVERWRITE
-+
-+#define CONFIG_BAUDRATE 115200
-+
-+/***********************************************************
-+ * Command definition
-+ ***********************************************************/
-+#define CONFIG_COMMANDS \
-+ (CONFIG_CMD_DFL | \
-+ CFG_CMD_BSP | \
-+ CFG_CMD_CACHE | \
-+ CFG_CMD_DATE | \
-+ CFG_CMD_DHCP | \
-+ CFG_CMD_DIAG | \
-+ CFG_CMD_ELF | \
-+ CFG_CMD_EXT2 | \
-+ CFG_CMD_FAT | \
-+ CFG_CMD_HWFLOW | \
-+ /* CFG_CMD_IDE | */ \
-+ /* CFG_CMD_IRQ | */ \
-+ CFG_CMD_JFFS2 | \
-+ CFG_CMD_MMC | \
-+ CFG_CMD_NAND | \
-+ CFG_CMD_PING | \
-+ CFG_CMD_PORTIO | \
-+ CFG_CMD_REGINFO | \
-+ CFG_CMD_SAVES | \
-+ CFG_CMD_USB)
-+
-+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-+#include <cmd_confdefs.h>
-+
-+#define CONFIG_BOOTDELAY 3
-+#define CONFIG_BOOTARGS "rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8"
-+#define CONFIG_ETHADDR 01:ab:cd:ef:fe:dc
-+#define CONFIG_NETMASK 255.255.255.0
-+#define CONFIG_IPADDR 10.0.0.110
-+#define CONFIG_SERVERIP 10.0.0.1
-+/*#define CONFIG_BOOTFILE "elinos-lart" */
-+#define CONFIG_BOOTCOMMAND "nand load 0x32000000 0x34000 0x200000; bootm 0x32000000"
-+
-+#define CONFIG_DOS_PARTITION 1
-+
-+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-+/* what's this ? it's not used anywhere */
-+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-+#endif
-+
-+/*
-+ * Miscellaneous configurable options
-+ */
-+#define CFG_LONGHELP /* undef to save memory */
-+#define CFG_PROMPT "QT2410 # " /* Monitor Command Prompt */
-+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-+#define CFG_MAXARGS 16 /* max number of command args */
-+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
-+
-+#define CFG_MEMTEST_START 0x30000000 /* memtest works on */
-+#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */
-+
-+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-+
-+#define CFG_LOAD_ADDR 0x33000000 /* default load address */
-+
-+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
-+/* it to wrap 100 times (total 1562500) to get 1 sec. */
-+#define CFG_HZ 1562500
-+
-+/* valid baudrates */
-+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-+
-+/*-----------------------------------------------------------------------
-+ * Stack sizes
-+ *
-+ * The stack sizes are set up in start.S using the settings below
-+ */
-+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-+#ifdef CONFIG_USE_IRQ
-+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-+#endif
-+
-+/* IDE/ATA config */
-+
-+#if 0
-+#define CFG_IDE_MAXBUS 1
-+#define CFG_IDE_MAXDEVICE 2
-+#define CFG_IDE_PREINIT 0
-+
-+#define CFG_ATA_BASE_ADDR
-+#endif
-+
-+#define CONFIG_USB_OHCI 1
-+
-+/*-----------------------------------------------------------------------
-+ * Physical Memory Map
-+ */
-+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-+#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */
-+#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-+#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */
-+
-+#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-+
-+#define CFG_FLASH_BASE PHYS_FLASH_1
-+
-+/*-----------------------------------------------------------------------
-+ * FLASH and environment organization
-+ */
-+
-+#define CONFIG_AMD_LV400 1 /* uncomment this if you have a LV400 flash */
-+
-+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-+#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */
-+#define CFG_MAX_FLASH_SECT (11) /* max number of sectors on one chip */
-+
-+/* timeout values are in ticks */
-+#define CFG_FLASH_ERASE_TOUT (5*CFG_HZ) /* Timeout for Flash Erase */
-+#define CFG_FLASH_WRITE_TOUT (5*CFG_HZ) /* Timeout for Flash Write */
-+
-+#define CFG_ENV_IS_IN_NAND 1
-+#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */
-+#define CFG_ENV_OFFSET 0x30000 /* environment after bootloader */
-+
-+#define NAND_MAX_CHIPS 1
-+#define CFG_NAND_BASE 0x4e000000
-+#define CFG_MAX_NAND_DEVICE 1
-+
-+#define CONFIG_MMC 1
-+#define CFG_MMC_BASE 0xff000000
-+
-+#define CONFIG_EXT2 1
-+
-+/* FAT driver in u-boot is broken currently */
-+#define CONFIG_FAT 1
-+#define CONFIG_SUPPORT_VFAT 1
-+
-+/* ATAG configuration */
-+#define CONFIG_INITRD_TAG 1
-+#define CONFIG_SETUP_MEMORY_TAGS 1
-+#define CONFIG_CMDLINE_TAG 1
-+#if 0
-+#define CONFIG_SERIAL_TAG 1
-+#define CONFIG_REVISION_TAG 1
-+#endif
-+
-+
-+#if 0
-+#define CONFIG_VIDEO
-+#define CONFIG_VIDEO_S3C2410
-+#define CONFIG_CFB_CONSOLE
-+#define CONFIG_VIDEO_LOGO
-+#define CONFIG_VGA_AS_SINGLE_DEVICE
-+
-+#define VIDEO_KBD_INIT_FCT 0
-+#define VIDEO_TSTC_FCT serial_tstc
-+#define VIDEO_GETC_FCT serial_getc
-+
-+#define LCD_VIDEO_ADDR 0x33d00000
-+#endif
-+
-+#endif /* __CONFIG_H */
-Index: git/include/s3c2410.h
-===================================================================
---- git.orig/include/s3c2410.h 2007-01-04 12:21:15.000000000 +0100
-+++ git/include/s3c2410.h 2007-01-04 12:21:18.000000000 +0100
-@@ -38,12 +38,6 @@
- #define S3C2410_ECCSIZE 512
- #define S3C2410_ECCBYTES 3
-
--typedef enum {
-- S3C24X0_UART0,
-- S3C24X0_UART1,
-- S3C24X0_UART2
--} S3C24X0_UARTS_NR;
--
- /* S3C2410 device base addresses */
- #define S3C24X0_MEMCTL_BASE 0x48000000
- #define S3C24X0_USB_HOST_BASE 0x49000000
-@@ -65,9 +59,23 @@
- #define S3C2410_SDI_BASE 0x5A000000
-
-
-+#define oNFCONF 0x00
-+#define oNFCMD 0x04
-+#define oNFADDR 0x08
-+#define oNFDATA 0x0C
-+#define oNFSTAT 0x10
-+#define oNFECC 0x14
-+
-+#ifndef __ASSEMBLER__
-+
- /* include common stuff */
- #include <s3c24x0.h>
-
-+typedef enum {
-+ S3C24X0_UART0,
-+ S3C24X0_UART1,
-+ S3C24X0_UART2
-+} S3C24X0_UARTS_NR;
-
- static inline S3C24X0_MEMCTL * const S3C24X0_GetBase_MEMCTL(void)
- {
-@@ -142,6 +150,7 @@
- return (S3C2410_SDI * const)S3C2410_SDI_BASE;
- }
-
-+#endif
-
- /* ISR */
- #define pISR_RESET (*(unsigned *)(_ISR_STARTADDRESS+0x0))
-Index: git/include/s3c24x0.h
-===================================================================
---- git.orig/include/s3c24x0.h 2007-01-04 12:21:15.000000000 +0100
-+++ git/include/s3c24x0.h 2007-01-04 12:21:18.000000000 +0100
-@@ -637,13 +637,7 @@
- S3C24X0_REG32 SDIDCNT;
- S3C24X0_REG32 SDIDSTA;
- S3C24X0_REG32 SDIFSTA;
--#ifdef __BIG_ENDIAN
-- S3C24X0_REG8 res[3];
-- S3C24X0_REG8 SDIDAT;
--#else
-- S3C24X0_REG8 SDIDAT;
-- S3C24X0_REG8 res[3];
--#endif
-+ S3C24X0_REG32 SDIDAT;
- S3C24X0_REG32 SDIIMSK;
- } /*__attribute__((__packed__))*/ S3C2410_SDI;
-
-@@ -1123,11 +1117,7 @@
- #define rSDIDatCnt (*(volatile unsigned *)0x5A000030)
- #define rSDIDatSta (*(volatile unsigned *)0x5A000034)
- #define rSDIFSTA (*(volatile unsigned *)0x5A000038)
--#ifdef __BIG_ENDIAN
--#define rSDIDAT (*(volatile unsigned char *)0x5A00003F)
--#else
--#define rSDIDAT (*(volatile unsigned char *)0x5A00003C)
--#endif
-+#define rSDIDAT (*(volatile unsigned *)0x5A00003C)
- #define rSDIIntMsk (*(volatile unsigned *)0x5A000040)
-
- #endif
Deleted: trunk/oe/packages/uboot/uboot-qt2410_0.0+cvs20061030.bb
===================================================================
--- trunk/oe/packages/uboot/uboot-qt2410_0.0+cvs20061030.bb 2007-05-30 16:20:53 UTC (rev 2104)
+++ trunk/oe/packages/uboot/uboot-qt2410_0.0+cvs20061030.bb 2007-05-30 22:10:24 UTC (rev 2105)
@@ -1,41 +0,0 @@
-DESCRIPTION = "U-boot bootloader w/ armzone qt2410 support"
-SECTION = "bootloader"
-PRIORITY = "optional"
-LICENSE = "GPL"
-SRCDATE := "${PV}"
-PR = "r0"
-
-PROVIDES = "virtual/bootloader"
-S = "${WORKDIR}/git"
-
-SRC_URI = "git://www.denx.de/git/u-boot.git/;protocol=git \
- file://u-boot-20061030-qt2410-gta01.patch;patch=1 \
- file://qt2410_*.h"
-
-EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX}"
-TARGET_LDFLAGS = ""
-UBOOT_MACHINE = "qt2410_config"
-
-inherit base
-
-do_compile () {
- for type in nand ram
- do
- install -m 0644 ${WORKDIR}/qt2410_${type}.h include/configs/qt2410.h
- oe_runmake ${UBOOT_MACHINE}
- oe_runmake all
- mv u-boot.bin u-boot_$type.bin
- done
-}
-
-do_deploy () {
- install -d ${DEPLOY_DIR_IMAGE}
- for type in nand ram
- do
- install ${S}/u-boot_$type.bin ${DEPLOY_DIR_IMAGE}/u-boot_$type-${MACHINE}-${DATETIME}.bin
- done
- install -m 0755 tools/mkimage ${STAGING_BINDIR_NATIVE}/uboot-mkimage
-}
-
-do_deploy[dirs] = "${S}"
-addtask deploy before do_build after do_compile
More information about the commitlog
mailing list
