r3292 - trunk/src/host/qemu-neo1973/openmoko
andrew at sita.openmoko.org
andrew at sita.openmoko.org
Sat Oct 27 11:20:16 CEST 2007
Author: andrew
Date: 2007-10-27 11:20:14 +0200 (Sat, 27 Oct 2007)
New Revision: 3292
Modified:
trunk/src/host/qemu-neo1973/openmoko/neo1973.xml
Log:
Import more GSM functionality from troll.xml (GPRS, phonebook, SIM filesystem, etc).
Modified: trunk/src/host/qemu-neo1973/openmoko/neo1973.xml
===================================================================
--- trunk/src/host/qemu-neo1973/openmoko/neo1973.xml 2007-10-27 01:18:44 UTC (rev 3291)
+++ trunk/src/host/qemu-neo1973/openmoko/neo1973.xml 2007-10-27 09:20:14 UTC (rev 3292)
@@ -12,9 +12,9 @@
<!-- Note: dialing 199 will cause a dialback to simulate an incoming call -->
<!-- Note: dialing 177 will cause a dialback to simulate an incoming call,
and hangup after 5 seconds -->
-<!-- Note: dialing 166 will accept the incoming call and hanup up after 5
+<!-- Note: dialing 166 will accept the incoming call and hangup up after 5
seconds-->
-<!-- Note: dialing 155 will elicit a 'BUSY' response from the recipient-->
+<!-- Note: dialing 155 will elicit a 'BUSY' response from the recipient -->
<!-- Initialize state variables -->
@@ -76,23 +76,67 @@
<!-- Network registration presentation flag -->
<set name="REG" value="1,0"/>
- <!-- Mobile phone operator selection mode (0=auto, 1=manual) -->
+ <!-- GPRS network registration presentation flag -->
+ <set name="GREG" value="0"/>
+
+ <!-- Mobile phone operator selection mode (0=auto, 1=manual,
+ 2=deregister, 3=set only <format>, 4=manual / automatic) -->
<set name="OPMODE" value="0"/>
+ <!-- GCF Operator List, format <status(1:available,2:current,
+ 3:forbidden)>,"<alphanum.operator name>","<short operator name>",
+ "<MCC/MNC num>"-->
<!-- Name of mobile phone operator 1 -->
<set name="OP1" value="QEMU Mobile"/>
+ <set name="OP1PLMN" value="26051"/>
+ <set name="OP1COPS" value="2,"${OP1}","QEMU","${OP1PLMN}""/>
<!-- Name of mobile phone operator 2 -->
- <set name="OP2" value="OpenedHand Net"/>
+ <set name="OP2" value="Maybe Forbidden Net"/>
+ <set name="OP2PLMN" value="26052"/>
+ <set name="OP2COPS" value="3,"${OP2}","MNT","${OP2PLMN}""/>
<!-- Name of mobile phone operator 3 -->
- <set name="OP3" value="OpenMoko Comm"/>
+ <set name="OP3" value="Competitor Net"/>
+ <set name="OP3PLMN" value="26053"/>
+ <set name="OP3COPS" value="3,"${OP3}","CNT","${OP3PLMN}""/>
+ <set name="OP4" value="Blocked Net"/>
+ <set name="OP4PLMN" value="26054"/>
+ <set name="OP4COPS" value="3,"${OP4}","BNT","${OP4PLMN}""/>
+
+ <set name="OP5" value="Inaccessible Net"/>
+ <set name="OP5PLMN" value="26055"/>
+ <set name="OP5COPS" value="3,"${OP5}","INT","${OP5PLMN}""/>
+
+ <set name="OP6" value="OpenedHand GSM"/>
+ <set name="OP6PLMN" value="26056"/>
+ <set name="OP6COPS" value="1,"${OP6}","PNT","${OP6PLMN}""/>
+
+ <set name="OP7" value="OpenMoko Telecomm"/>
+ <set name="OP7PLMN" value="26057"/>
+ <set name="OP7COPS" value="1,"${OP7}","TNT","${OP7PLMN}""/>
+
+ <set name="OP8" value="HELLO MOKO"/>
+ <set name="OP8PLMN" value="26058"/>
+ <set name="OP8COPS" value="1,"${OP8}","MBT","${OP8PLMN}""/>
+
+ <!-- Preferred Operators -->
+ <set name="PO1" value="1,2,26051"/>
+ <set name="PO2" value="2,2,26052"/>
+ <set name="PO3" value="3,2,26053"/>
+ <set name="PO4" value="4,2,26054"/>
+ <set name="PO5" value="5,2,26055"/>
+ <set name="PO6" value="6,2,26056"/>
+ <set name="PO7" value="7,2,26057"/>
+ <set name="PO8" value="8,2,26058"/>
+
<!-- Name of current mobile phone operator -->
<set name="OP" value="${OP1}"/>
<!-- Phone operator list -->
- <set name="OPLIST" value="(2,"${OP1}","OP1","11111"),(1,"${OP2}","OP2","22222"),(1,"${OP3}","OP3","33333")"/>
+ <set name="OPLIST"
+ value="(${OP1COPS}),(${OP2COPS}),(${OP3COPS}),(${OP4COPS}),(${OP5COPS}),(${OP6COPS}),(${OP7COPS}),(${OP8COPS})"/>
<!-- Calling line identification presentation flag -->
<set name="LIP" value="0"/>
@@ -120,6 +164,9 @@
<set name="CF1C4" value="0"/>
<set name="CF1C8" value="0"/>
+ <!-- Fixed Dialling presentation mode -->
+ <set name="FD" value="0"/>
+
<!-- Unstructured service presentation mode -->
<set name="USD" value="0"/>
@@ -160,6 +207,7 @@
<!-- Name of the PIN that is required (eg. "PIN") -->
<!-- For the moment DON'T set a pinname here. We don't want a PIN shipped with the release -->
+ <!-- READY: PIN/PUK not required; SIM PIN: PIN required; SIM PUK: PUK REQUIRED -->
<set name="PINNAME" value="READY"/>
<!-- Value of the PIN that is required -->
@@ -168,7 +216,16 @@
<!-- pin protection status -->
<set name="SC" value="0"/>
- <!-- Value of the PIN that is required -->
+ <!-- Value of the PIN2 that is required -->
+ <set name="PIN2VALUE" value="3579"/>
+
+ <!-- Value of the PUK that is required -->
+ <set name="PUKVALUE" value="13243546"/>
+
+ <!-- Value of the PUK2 that is required -->
+ <set name="PUK2VALUE" value="08978675"/>
+
+ <!-- Value of the PSPIN that is required -->
<set name="PSPINVALUE" value="4321"/>
<!-- phone to sim pin protection status -->
<set name="PS" value="0"/>
@@ -783,6 +840,25 @@
</chat>
<chat>
+ <!-- Query GPRS network registration result code presentation -->
+ <command>AT+CGREG?</command>
+ <response>+CGREG: ${GREG},0\nOK</response>
+</chat>
+
+<chat>
+ <!-- Query GPRS network registration result code presentation types -->
+ <command>AT+CGREG=?</command>
+ <response>+CGREG: (0-2)\nOK</response>
+</chat>
+
+<chat>
+ <!-- Set GPRS network registration result code presentation -->
+ <command>AT+CGREG=*</command>
+ <response>OK</response>
+ <set name="GREG" value="*"/>
+</chat>
+
+<chat>
<!-- Query current operator selection -->
<command>AT+COPS?</command>
<response delay="500">+COPS: ${OPMODE},0,"${OP}"\nOK</response>
@@ -791,7 +867,7 @@
<chat>
<!-- Query supported operators, always reports -->
<command>AT+COPS=?</command>
- <response delay="2000">+COPS: ${OPLIST},(0,"Maybe Forbidden Net","MFN","34567"),(3,"Competitor Net","COMNET","44444")\nOK</response>
+ <response delay="2000">+COPS: ${OPLIST}\nOK</response>
</chat>
<chat>
@@ -801,6 +877,12 @@
</chat>
<chat>
+ <!-- Use MCC/MNC for operators -->
+ <command>AT+COPS=3,2</command>
+ <response delay="500">OK</response>
+</chat>
+
+<chat>
<!-- Set automatic operator selection -->
<command>AT+COPS=0*</command>
<response>OK</response>
@@ -809,62 +891,166 @@
</chat>
<chat>
- <!-- Set manual operator selection -->
+ <!-- Set manual operator selection OP1 (Alphanumeric) -->
<command>AT+COPS=1,0,"${OP1}"</command>
<response>OK</response>
<set name="OPMODE" value="1"/>
<set name="OP" value="${OP1}"/>
- <set name="OPLIST" value="(2,"${OP1}","OP1","11111"),(1,"${OP2}","OP2","22222"),(1,"${OP3}","OP3","33333")"/>
</chat>
<chat>
- <!-- Set manual operator selection -->
- <command>AT+COPS=1,0,"${OP2}"</command>
+ <!-- Set manual operator selection OP1 (MCC/MNC) -->
+ <command>AT+COPS=1,2,"${OP1PLMN}"</command>
<response>OK</response>
<set name="OPMODE" value="1"/>
- <set name="OP" value="${OP2}"/>
- <set name="OPLIST" value="(1,${OP1},OP1,111)(2,${OP2},OP2,222),(1,${OP3},OP3,333)"/>
- <set name="OPLIST" value="(2,"${OP1}","OP1","11111"),(1,"${OP2}","OP2","22222"),(1,"${OP3}","OP3","33333")"/>
+ <set name="OP" value="${OP1}"/>
</chat>
<chat>
- <!-- Set manual operator selection -->
+ <!-- Refuse access to OP2 (Alphanumeric) -->
+ <command>AT+COPS=1,0,"${OP2}"</command>
+ <response>ERROR</response>
+</chat>
+<chat>
+ <!-- Refuse access to OP2 (MCC/MNC) -->
+ <command>AT+COPS=1,2,"${OP2PLMN}"</command>
+ <response>ERROR</response>
+</chat>
+<chat>
+ <!-- Refuse access to OP3 (Alphanumeric) -->
<command>AT+COPS=1,0,"${OP3}"</command>
- <response>OK</response>
+ <response>ERROR</response>
+</chat>
+<chat>
+ <!-- Refuse access to OP3 (MCC/MNC) -->
+ <command>AT+COPS=1,2,"${OP3PLMN}"</command>
+ <response>ERROR</response>
+</chat>
+<chat>
+ <!-- Refuse access to OP4 (Alphanumeric) -->
+ <command>AT+COPS=1,0,"${OP4}"</command>
+ <response>ERROR</response>
+</chat>
+<chat>
+ <!-- Refuse access to OP4 (MCC/MNC) -->
+ <command>AT+COPS=1,2,"${OP4PLMN}"</command>
+ <response>ERROR</response>
+</chat>
+
+<chat>
+ <!-- Set manual operator selection OP6 (Alphanumeric) -->
+ <command>AT+COPS=1,0,"${OP6}"</command>
+ <response delay="2000">OK</response>
<set name="OPMODE" value="1"/>
- <set name="OP" value="${OP3}"/>
- <set name="OPLIST" value="(2,"${OP1}","OP1","11111"),(1,"${OP2}","OP2","22222"),(1,"${OP3}","OP3","33333")"/>
+ <set name="OP" value="${OP6}"/>
</chat>
<chat>
- <!-- Set manual operator selection -->
- <command>AT+COPS=4,0,"${OP1}"</command>
- <response>OK</response>
+ <!-- Set manual operator selection OP6 (MCC/MNC) -->
+ <command>AT+COPS=1,2,"${OP6PLMN}"</command>
+ <response delay="2000">OK</response>
<set name="OPMODE" value="1"/>
- <set name="OP" value="${OP1}"/>
- <set name="OPLIST" value="(2,"${OP1}","OP1","11111"),(1,"${OP2}","OP2","22222"),(1,"${OP3}","OP3","33333")"/>
+ <set name="OP" value="${OP6}"/>
</chat>
<chat>
- <!-- Set manual operator selection -->
- <command>AT+COPS=4,0,"${OP2}"</command>
+ <!-- Request preferred operators -->
+ <command>AT+CPOL?</command>
+ <response delay="2000">+CPOL: ${PO1}\n+CPOL: ${PO2}\n+CPOL: ${PO3}\n+CPOL: ${PO4}\n+CPOL: ${PO5}\n+CPOL: ${PO6}\n+CPOL: ${PO7}\n+CPOL: ${PO8}\nOK</response>
+</chat>
+
+<chat>
+ <!-- Request PLMNS descriptors -->
+ <command>AT+COPN</command>
+ <response delay="2000">+COPN: "${OP1PLMN}","${OP1}"\n+COPN: "${OP2PLMN}","${OP2}"\n+COPN: "${OP3PLMN}","${OP3}"\n+COPN: "${OP4PLMN}","${OP4}"\n+COPN: "${OP5PLMN}","${OP5}"\n+COPN: "${OP6PLMN}","${OP6}"\n+COPN: "${OP7PLMN}","${OP7}"\n+COPN: "${OP8PLMN}","${OP8}"\nOK</response>
+</chat>
+
+<chat>
+ <!-- Set preferred operator 1 -->
+ <command>AT+CPOL=1,2,*</command>
<response>OK</response>
- <set name="OPMODE" value="1"/>
- <set name="OP" value="${OP2}"/>
- <set name="OPLIST" value="(2,"${OP1}","OP1","11111"),(1,"${OP2}","OP2","22222"),(1,"${OP3}","OP3","33333")"/>
+ <set name="PO1" value="1,2,${*}"/>
</chat>
<chat>
- <!-- Set manual operator selection -->
- <command>AT+COPS=4,0,"${OP3}"</command>
+ <!-- Set preferred operator 2 -->
+ <command>AT+CPOL=2,2,*</command>
<response>OK</response>
- <set name="OPMODE" value="1"/>
- <set name="OP" value="${OP3}"/>
- <set name="OPLIST" value="(2,"${OP1}","OP1","11111"),(1,"${OP2}","OP2","22222"),(1,"${OP3}","OP3","33333")"/>
+ <set name="PO2" value="2,2,${*}"/>
</chat>
<chat>
+ <!-- Set preferred operator 3 -->
+ <command>AT+CPOL=3,2,*</command>
+ <response>OK</response>
+ <set name="PO3" value="3,2,${*}"/>
+</chat>
+
+<chat>
+ <!-- Set preferred operator 4 -->
+ <command>AT+CPOL=4,2,*</command>
+ <response>OK</response>
+ <set name="PO4" value="4,2,${*}"/>
+</chat>
+
+<chat>
+ <!-- Set preferred operator 5 -->
+ <command>AT+CPOL=5,2,*</command>
+ <response>OK</response>
+ <set name="PO5" value="5,2,${*}"/>
+</chat>
+
+<chat>
+ <!-- Set preferred operator 6 -->
+ <command>AT+CPOL=6,2,*</command>
+ <response>OK</response>
+ <set name="PO6" value="6,2,${*}"/>
+</chat>
+
+<chat>
+ <!-- Set preferred operator 7 -->
+ <command>AT+CPOL=7,2,*</command>
+ <response>OK</response>
+ <set name="PO7" value="7,2,${*}"/>
+</chat>
+
+<chat>
+ <!-- Set preferred operator 8 -->
+ <command>AT+CPOL=8,2,*</command>
+ <response>OK</response>
+ <set name="PO8" value="8,2,${*}"/>
+</chat>
+
+<!-- FIXED DIALLING LOCKS -->
+<chat>
+ <!-- Query available facility lock -->
+ <command>AT+CLCK="FD",2</command>
+ <response>+CLCK: ${FD}\nOK</response>
+</chat>
+
+<chat>
<!-- Query available facility locks -->
+ <command>AT+CLCK="FD",0,"${PIN2VALUE}"</command>
+ <response>OK</response>
+ <set name="FD" value="0"/>
+</chat>
+
+<chat>
+ <!-- Query available facility locks -->
+ <command>AT+CLCK="FD",1,"${PIN2VALUE}"</command>
+ <response>OK</response>
+ <set name="FD" value="1"/>
+</chat>
+
+<chat>
+ <!-- Query available facility locks -->
+ <command>AT+CLCK="FD",*</command>
+ <response>ERROR</response>
+</chat>
+
+<!-- SIM CARD LOCKS -->
+<chat>
+ <!-- Query available facility locks -->
<command>AT+CLCK=?</command>
<response>+CLCK: PS(8),SC(8)\nOK</response>
</chat>
@@ -1035,6 +1221,20 @@
<set name="CF0C1" value="1"/>
<set name="CF0C1N" value="*"/>
</chat>
+<chat>
+ <!-- Set call forwarding number international (voice, unconditional) -->
+ <command>AT+CCFC=0,3,*,145,1</command>
+ <response>OK</response>
+ <set name="CF0C1" value="1"/>
+ <set name="CF0C1N" value="*"/>
+</chat>
+<chat>
+ <!-- Set call forwarding number national (voice, unconditional) -->
+ <command>AT+CCFC=0,3,*,129,1</command>
+ <response>OK</response>
+ <set name="CF0C1" value="1"/>
+ <set name="CF0C1N" value="*"/>
+</chat>
<chat>
<!-- Set call forwarding number (voice, when busy) -->
@@ -1043,8 +1243,54 @@
<set name="CF1C1" value="1"/>
<set name="CF1C1N" value="*"/>
</chat>
+<chat>
+ <!-- Set call forwarding number international (voice, when busy) -->
+ <command>AT+CCFC=1,3,*,145,1</command>
+ <response>OK</response>
+ <set name="CF1C1" value="1"/>
+ <set name="CF1C1N" value="*"/>
+</chat>
+<chat>
+ <!-- Set call forwarding number national (voice, when busy) -->
+ <command>AT+CCFC=1,3,*,129,1</command>
+ <response>OK</response>
+ <set name="CF1C1" value="1"/>
+ <set name="CF1C1N" value="*"/>
+</chat>
<chat>
+ <!-- Set call forwarding number international (voice, no reply) -->
+ <command>AT+CCFC=2,3,*,145,1</command>
+ <response>OK</response>
+ <set name="CF2C1" value="1"/>
+ <set name="CF2C1N" value="*"/>
+</chat>
+
+<chat>
+ <!-- Set call forwarding number (voice, no reply) -->
+ <command>AT+CCFC=2,3,*,129,1</command>
+ <response>OK</response>
+ <set name="CF2C1" value="1"/>
+ <set name="CF2C1N" value="*"/>
+</chat>
+
+<chat>
+ <!-- Set call forwarding number international (voice, not reachable) -->
+ <command>AT+CCFC=3,3,*,145,1</command>
+ <response>OK</response>
+ <set name="CF3C1" value="1"/>
+ <set name="CF3C1N" value="*"/>
+</chat>
+
+<chat>
+ <!-- Set call forwarding number (voice, not reachable) -->
+ <command>AT+CCFC=3,3,*,129,1</command>
+ <response>OK</response>
+ <set name="CF3C1" value="1"/>
+ <set name="CF3C1N" value="*"/>
+</chat>
+
+<chat>
<!-- Set call forwarding number (data, unconditional) -->
<command>AT+CCFC=0,3,*,,2</command>
<response>OK</response>
@@ -1221,7 +1467,7 @@
<chat>
<!-- Query call waiting -->
<command>AT+CCWA=1,2</command>
- <response>+CCWA: ${CWA_V},1\n+CCWA: ${CWA_D},2\n+CCWA: ${CWA_F},4\nOK</response>
+ <response delay="2000">+CCWA: ${CWA_V},1\n+CCWA: ${CWA_D},2\n+CCWA: ${CWA_F},4\nOK</response>
</chat>
<chat>
@@ -1237,55 +1483,55 @@
</chat>
<!-- Disable call waiting -->
-<chat><command>AT+CCWA=1,0,1</command><response>OK</response>
+<chat><command>AT+CCWA=1,0,1</command><response delay="1000">OK</response>
<set name="CWA_V" value="0"/>
</chat>
-<chat><command>AT+CCWA=1,0,2</command><response>OK</response>
+<chat><command>AT+CCWA=1,0,2</command><response delay="1000">OK</response>
<set name="CWA_D" value="0"/>
</chat>
-<chat><command>AT+CCWA=1,0,3</command><response>OK</response>
+<chat><command>AT+CCWA=1,0,3</command><response delay="1000">OK</response>
<set name="CWA_V" value="0"/>
<set name="CWA_D" value="0"/>
</chat>
-<chat><command>AT+CCWA=1,0,4</command><response>OK</response>
+<chat><command>AT+CCWA=1,0,4</command><response delay="1000">OK</response>
<set name="CWA_F" value="0"/>
</chat>
-<chat><command>AT+CCWA=1,0,5</command><response>OK</response>
+<chat><command>AT+CCWA=1,0,5</command><response delay="1000">OK</response>
<set name="CWA_V" value="0"/>
<set name="CWA_F" value="0"/>
</chat>
-<chat><command>AT+CCWA=1,0,6</command><response>OK</response>
+<chat><command>AT+CCWA=1,0,6</command><response delay="1000">OK</response>
<set name="CWA_D" value="0"/>
<set name="CWA_F" value="0"/>
</chat>
-<chat><command>AT+CCWA=1,0,7</command><response>OK</response>
+<chat><command>AT+CCWA=1,0,7</command><response delay="1000">OK</response>
<set name="CWA_V" value="0"/>
<set name="CWA_D" value="0"/>
<set name="CWA_F" value="0"/>
</chat>
<!-- Enable call waiting -->
-<chat><command>AT+CCWA=1,1,1</command><response>OK</response>
+<chat><command>AT+CCWA=1,1,1</command><response delay="1000">OK</response>
<set name="CWA_V" value="1"/>
</chat>
-<chat><command>AT+CCWA=1,1,2</command><response>OK</response>
+<chat><command>AT+CCWA=1,1,2</command><response delay="1000">OK</response>
<set name="CWA_D" value="1"/>
</chat>
-<chat><command>AT+CCWA=1,1,3</command><response>OK</response>
+<chat><command>AT+CCWA=1,1,3</command><response delay="1000">OK</response>
<set name="CWA_V" value="1"/>
<set name="CWA_D" value="1"/>
</chat>
-<chat><command>AT+CCWA=1,1,4</command><response>OK</response>
+<chat><command>AT+CCWA=1,1,4</command><response delay="1000">OK</response>
<set name="CWA_F" value="1"/>
</chat>
-<chat><command>AT+CCWA=1,1,5</command><response>OK</response>
+<chat><command>AT+CCWA=1,1,5</command><response delay="1000">OK</response>
<set name="CWA_V" value="1"/>
<set name="CWA_F" value="1"/>
</chat>
-<chat><command>AT+CCWA=1,1,6</command><response>OK</response>
+<chat><command>AT+CCWA=1,1,6</command><response delay="1000">OK</response>
<set name="CWA_D" value="1"/>
<set name="CWA_F" value="1"/>
</chat>
-<chat><command>AT+CCWA=1,1,7</command><response>OK</response>
+<chat><command>AT+CCWA=1,1,7</command><response delay="1000">OK</response>
<set name="CWA_V" value="1"/>
<set name="CWA_D" value="1"/>
<set name="CWA_F" value="1"/>
@@ -1415,7 +1661,7 @@
<chat>
<!-- Check for which PIN is required -->
<command>AT+CPIN?</command>
- <response>+CPIN: ${PINNAME}\nOK</response>
+ <response delay="3000">+CPIN: ${PINNAME}\nOK</response>
</chat>
<chat>
@@ -1426,23 +1672,88 @@
</chat>
<chat>
- <!-- Change PIN (success) -->
+ <!-- Change PIN using PUK (success) -->
<!-- Meaningless command... can't work out use in hardware, use CPWD instead -->
<!-- first is puck instead. -->
- <command>AT+CPIN="12345678","*"</command>
+ <command>AT+CPIN="${PUKVALUE}","*"</command>
<response>+CPIN: READY\nOK</response>
<set name="PINVALUE" value="${*}"/>
<set name="PINNAME" value="READY"/>
</chat>
<chat>
- <!-- Enter PIN (failure) -->
- <command>AT+CPIN*</command>
+ <!-- Enter PIN (PUK failure when PINNAME was "SIM PUK" from start) -->
+ <command>AT+CPIN="*","*"</command>
<response>+CPIN: SIM PUK\nERROR</response>
<set name="PINNAME" value="SIM PUK"/>
</chat>
<chat>
+ <!-- Enter PIN (failure) -->
+ <command>AT+CPIN=*</command>
+ <response>+CPIN: SIM PIN\nERROR</response>
+ <set name="PINNAME" value="SIM PIN"/>
+ <switch name="pinretry1"/>
+</chat>
+
+<state name="pinretry1">
+
+ <chat>
+ <!-- Enter PIN (success) -->
+ <command>AT+CPIN="${PINVALUE}"</command>
+ <response>+CPIN: READY\nOK</response>
+ <set name="PINNAME" value="READY"/>
+ <switch name="default"/>
+ </chat>
+
+ <chat>
+ <!-- Change PIN using PUK (success) -->
+ <command>AT+CPIN="${PUKVALUE}","*"</command>
+ <response>+CPIN: READY\nOK</response>
+ <set name="PINVALUE" value="${*}"/>
+ <set name="PINNAME" value="READY"/>
+ <switch name="default"/>
+ </chat>
+
+ <chat>
+ <!-- Enter PIN (failure) -->
+ <command>AT+CPIN=*</command>
+ <response>+CPIN: SIM PIN\nERROR</response>
+ <set name="PINNAME" value="SIM PIN"/>
+ <switch name="pinretry2"/>
+ </chat>
+
+</state>
+
+<state name="pinretry2">
+
+ <chat>
+ <!-- Enter PIN (success) -->
+ <command>AT+CPIN="${PINVALUE}"</command>
+ <response>+CPIN: READY\nOK</response>
+ <set name="PINNAME" value="READY"/>
+ <switch name="default"/>
+ </chat>
+
+ <chat>
+ <!-- Change PIN using PUK (success) -->
+ <command>AT+CPIN="${PUKVALUE}","*"</command>
+ <response>+CPIN: READY\nOK</response>
+ <set name="PINVALUE" value="${*}"/>
+ <set name="PINNAME" value="READY"/>
+ <switch name="default"/>
+ </chat>
+
+ <chat>
+ <!-- Enter PIN (failure) -->
+ <command>AT+CPIN=*</command>
+ <response>+CPIN: SIM PUK\nERROR</response>
+ <set name="PINNAME" value="SIM PUK"/>
+ </chat>
+
+</state>
+
+<chat>
<!-- Query battery charge -->
<command>AT+CBC</command>
<response>+CBC: ${BC}\nOK</response>
@@ -1654,6 +1965,62 @@
<response>+CPBW: (1-2),32,(129,145),16\nOK</response>
</chat>
+<!-- Phonebook commands are implemented in the phone simulator source code -->
+<phonebook name="SM" size="150">
+ <entry index="1" number="123" name="ABCDEFGHIJKLMNOPQRSTUVWXYZABCDEF"/>
+ <entry index="2" number="24685" name="Adam Zucker/m"/>
+ <entry index="3" number="48759" name="Bradley Young"/>
+ <entry index="4" number="45575" name="Chuck Woodbury/w"/>
+ <entry index="5" number="57968" name="Chuck Woodbury/h"/>
+ <entry index="6" number="48959" name="Darren Umber"/>
+ <entry index="7" number="48759" name="Courtney Umber/h"/>
+ <entry index="8" number="42887" name="Courtney Umber/m"/>
+ <entry index="9" number="87683" name="Evan Ungar"/>
+ <entry index="10" number="15798" name="Frank Twedell"/>
+ <entry index="11" number="12497" name="Greg Smith/w"/>
+ <entry index="12" number="89765" name="Greg Smith/m"/>
+ <entry index="13" number="12498" name="Greg Smith/o"/>
+ <entry index="14" number="34967" name="Greg Smith/h"/>
+ <entry index="15" number="57682" name="Henry Ross/m"/>
+ <entry index="16" number="78952" name="Henry Ross/h"/>
+ <entry index="17" number="44585" name="Ivan Prischmann"/>
+ <entry index="19" number="13553" name="Jack Odegard/h"/>
+ <entry index="20" number="49755" name="Jack Odegard/m"/>
+ <entry index="21" number="57683" name="Rachel Odegard"/>
+ <entry index="22" number="14573" name="Kevin Norris"/>
+ <entry index="23" number="48468" name="Logan Minkoff"/>
+ <entry index="24" number="48468" name="Tracy Minkoff"/>
+ <entry index="25" number="89624" name="Matthew LeBlanc"/>
+ <entry index="26" number="57439" name="Nathan Kelly/m"/>
+ <entry index="27" number="13596" name="Nathan Kelly/w"/>
+ <entry index="28" number="18279" name="Paul Jacobs"/>
+ <entry index="29" number="62755" name="Robert Irving"/>
+ <entry index="30" number="13466" name="Sean Hunt/h"/>
+ <entry index="31" number="59786" name="Sean Hunt/m"/>
+ <entry index="32" number="13664" name="Thomas Grayson"/>
+ <entry index="33" number="77957" name="Victor Frey"/>
+ <entry index="34" number="14535" name="Wade Emerson"/>
+ <entry index="35" number="98735" name="Monica Emerson"/>
+ <entry index="36" number="65865" name="Dorathy Foster"/>
+ <entry index="37" number="66573" name="Gina Haylock/m"/>
+ <entry index="38" number="33846" name="Gina Haylock/w"/>
+ <entry index="39" number="35933" name="BuyIt"/>
+ <entry index="40" number="2468DD" name="Wildcard"/>
+ <entry index="101" number="10101" name="GSM Test"/>
+</phonebook>
+
+<phonebook name="FD" size="20">
+ <entry index="1" number="+1357924680" name="FDN111"/>
+ <entry index="2" number="24680" name="FDN222"/>
+ <entry index="3" number="+123465678901234567890" name="FDN333"/>
+ <entry index="4" number="112" name="Emergency"/>
+</phonebook>
+
+<phonebook name="SN" size="50">
+ <entry index="1" number="013" name="Directory Assistance"/>
+ <entry index="2" number="121" name="Call Minding"/>
+</phonebook>
+
<!-- GSM 07.05: SMS related commands -->
<chat>
@@ -1884,6 +2251,12 @@
</chat>
<chat>
+ <!-- Global object identification (ignored) -->
+ <command>AT+GOI</command>
+ <response>OK</response>
+</chat>
+
+<chat>
<!-- Character framing (ignored) -->
<command>AT+ICF*</command>
<response>OK</response>
@@ -2300,19 +2673,7 @@
+ILRR
+IPR
+FCLASS
-+VBT
-+VCID
-+VGR
-+VGT
-+VIP
-+VIT
-+VLS
-+VRX
-+VSM
-+VTS
-+VTD
-+VTX
-*ECAM
+%VTS
A
D
E
@@ -2453,4 +2814,66 @@
</toolkit>
+<!-- SIM filesystem definition, based on standard test strings
+ presented in GSM 11.10-4. This is primarily intended for
+ testing icon definitions within SIM toolkit applications -->
+
+<filesystem>
+
+<file name="EFphase">
+ 03
+</file>
+
+<file name="EFimsi">
+ 08 09 10 10 10 32 54 76 98
+</file>
+
+<file name="EFimg" recordsize="20">
+ 01 2E 28 11 4F 01 00 00 00 E8 FF FF FF FF FF FF FF FF FF FF
+ 01 08 08 21 4F 02 00 00 00 1F FF FF FF FF FF FF FF FF FF FF
+ 01 18 10 11 4F 03 00 00 00 32 FF FF FF FF FF FF FF FF FF FF
+ 01 08 08 11 4F 04 00 00 00 0A FF FF FF FF FF FF FF FF FF FF
+ 01 05 05 11 4F 05 00 00 00 08 FF FF FF FF FF FF FF FF FF FF
+</file>
+
+<file name="EFimg1">
+ 2E 28 00 00 00 00 00 00 00 01 FF 80 00 00 00 0F
+ FF 00 00 00 00 77 FE 00 00 00 01 BF F8 00 00 00
+ 06 FF E0 00 00 00 1A 03 80 00 00 00 6B F6 BC 00
+ 00 01 AF D8 38 00 00 06 BF 60 20 00 00 1A FD 80
+ 40 00 00 6B F6 00 80 00 01 A0 1F 02 00 00 06 FF
+ E4 04 00 00 1B FF 90 10 00 00 6D EE 40 40 00 01
+ BF F9 01 00 00 6F FF E4 04 00 00 1B FF 90 10 00
+ 00 6F FE 40 40 00 01 BF F9 01 00 00 06 FF E6 04
+ 00 00 1B FF 88 10 00 00 6F FE 20 40 00 01 BF F8
+ 66 00 00 06 FF E0 F0 00 00 1B FF 80 80 00 00 7F
+ FE 00 00 00 03 00 0C 00 00 00 1F FF F8 00 00 00
+ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ 1C 21 08 44 EE 00 48 C4 31 92 20 01 25 11 45 50
+ 80 07 14 45 15 43 80 12 71 1C 4D 08 00 4A 24 89
+ 32 20 01 C8 9E 24 4E E0
+</file>
+
+<file name="EFimg2">
+ 08 08 02 03 00 16 AA AA 80 02 85 42 81 42 81 42
+ 81 52 80 02 AA AA FF 00 00 00 FF 00 00 00 FF
+</file>
+
+<file name="EFimg3">
+ 18 10 FF FF FF 80 00 01 80 00 01 80 00 01 8F 3C
+ F1 89 20 81 89 20 81 89 20 F1 89 20 11 89 20 11
+ 89 20 11 8F 3C F1 80 00 01 80 00 01 80 00 01 FF
+ FF FF
+</file>
+
+<file name="EFimg4">
+ 08 08 FF 03 A5 99 99 A5 C3 FF
+</file>
+
+<file name="EFimg5">
+ 05 05 FE EB BF FF FF FF
+</file>
+
+</toolkit>
+
</simulator>
More information about the commitlog
mailing list
