development kernel tree: Changes to 'andy'
git at git.openmoko.org
git at git.openmoko.org
Fri Aug 8 14:27:32 CEST 2008
Rebased ref, commits from common ancestor:
commit 80397f460d1cfdad9cc74e083164fd314c9c67ca
Author: Andy Green <andy at openmoko.com>
Date: Fri Aug 8 13:27:06 2008 +0100
fix-glamo-crank-memory-to-90MHz.patch
This changes Glamo memory and now host bus PLL to 90MHz from
80MHz, as recommended by S-Media. Bandwidth should go up
by 12.5% by this in raw terms anyway.
Signed-off-by: Andy Green <andy at openmoko.com>
commit b7292e3909e86a15485ee31ee827f98afe0d496c
Author: Andy Green <andy at openmoko.com>
Date: Fri Aug 8 13:27:04 2008 +0100
fix-glamo-turbo-host-interface.patch
Until now, we forced Glamo wait states to 3 on read and write
actions -- on the GLAMO side of the fence. This reduces them
to "0", although nWAIT is still briefly operated I saw. This
should reduce all memory bus timing by 3 Glamo Host bus clocks,
60ns at 50MHz.
In addition, until now we used PLL1 (50MHz) for host bus clock.
Now, we use PLL2 (80MHz) for host bus clock, so all transactions
complete quicker on Glamo side, it's a raw 60% improvement.
These changes do not appear to impact correct operation of Glamo
SD Card or video after testing for a week.
Signed-off-by: Andy Green <andy at openmoko.com>
commit eac79e9b466f1a24f89fc65d385d2f20037f8691
Author: Andy Green <andy at openmoko.com>
Date: Fri Aug 8 13:26:27 2008 +0100
fix-reote-install-for-ext3-only-sd.patch
Signed-off-by: Andy Green <andy at openmoko.com>
commit 0cc74fbc0f37e37f70e43d8c780edeff2678372b
Author: Andy Green <andy at openmoko.com>
Date: Fri Aug 8 13:26:27 2008 +0100
defconfig-nuke-cruft.patch
Signed-off-by: Andy Green <andy at openmoko.com>
commit 6d7de9e407239cbad0a3a9184e6bcd46e21a527a
Author: Andy Green <andy at openmoko.com>
Date: Fri Aug 8 13:26:27 2008 +0100
defconfig-kill-hxd8.patch
Signed-off-by: Andy Green <andy at openmoko.com>
commit f2c5feee0a7eefcf8c247a943ba4038962d20256
Author: Mike Westerhof <mwester at dls.net>
Date: Fri Aug 8 13:26:27 2008 +0100
fix-touchscreen-driver-gta01-missing-includes.patch
Add missing initialization for the touchscreen driver for the
gta01 platform.
Signed-off-by: Mike Westerhof <mwester at dls.net>
commit 952009f92410fbcb6ddd7653ba35af1570867746
Author: Andy Green <andy at openmoko.com>
Date: Fri Aug 8 13:26:26 2008 +0100
test-touchscreen-median.patch
Signed-off-by: Andy Green <andy at openmoko.com>
commit 78621054e25f8dd7700288816b9cda40dbb10b76
Author: Andy Green <andy at openmoko.com>
Date: Fri Aug 8 13:26:26 2008 +0100
config-touchscreen-filters.patch
Signed-off-by: Andy Green <andy at openmoko.com>
commit 2d68fa06d5cfcf38ce9bd551b478dab408141cce
Author: Mike Westerhof <mwester at dls.net>
Date: Fri Aug 8 13:25:02 2008 +0100
gta01-uart-fifo-trigger-sooner.patch
Set the UART FIFO to trigger earlier on the GTA01 device to minimize
UART overruns from the GSM.
Signed-off-by: Mike Westerhof <mwester at dls.net>
commit 9ee405d79609106ea330b21d54f30b853e262296
Author: Mike Westerhof <mwester at dls.net>
Date: Fri Aug 8 13:10:59 2008 +0100
fix-suspend-backlight-timing-gta01.patch
This patch adds the gta01 backlight callback that defers the
restoring of the backlight until after the jbt driver has
resumed. This doesn't eliminate the flashing of the LCD on
the gta01, but it reduces it considerably.
Signed-off-by: Mike Westerhof <mwester at dls.net>
commit 0c136b451381e760c056a7683b7fc28901f54da4
Author: Mike Westerhof <mwester at dls.net>
Date: Fri Aug 8 13:10:59 2008 +0100
gta01-pcf50606-disable-irq-from-suspend-until-resume.patch
This patch is the pcf50606 equivalent of the pcf50633 patch that
disables interrupts from the chip until after resume is complete.
In order to ensure no data is lost, the work function is called
post-resume to process any pending interrupts.
Most of the code was quite literally re-used from Andy Green's
original patch.
Signed-off-by: Mike Westerhof <mwester at dls.net>
commit bea12b6beb76a483145b07d30602b0dd18ff2484
Author: Mike Westerhof <mwester at dls.net>
Date: Fri Aug 8 13:10:18 2008 +0100
silence-serial-console-gta01.patch
This patch ensures that no console data will go the UART while
the GSM mux is switched to the GSM. This is necessary despite
the code that disables the console due to the fact that the
console resumes before the neo1973_pm_gsm driver, and consoles
always resume in the "on" state.
Signed-off-by: Mike Westerhof <mwester at dls.net>
commit 749594928cc1a0e452c4c791fcbea2f8f4a7e259
Author: Mike Westerhof <mwester at dls.net>
Date: Fri Aug 8 13:08:03 2008 +0100
commit 830ea3d0c27c0c750b7bf1b56c002ee7943f3edc
gta0x-log-serial-rx-error.patch
This patch causes a KERN_DEBUG message to be printed each time an
error status is read from a UART. This is intended to facilitate
the reporting of more useful problem and bug reports from users
in the field.
Signed-off-by: Mike Westerhof <mwester at dls.net>
commit 7e5f528cb1448ac31a4e3a45c7c953ea95869d4d
Author: Mike Westerhof <mwester at dls.net>
Date: Fri Aug 8 13:08:03 2008 +0100
gta0x-add-minimal-GSM-flowcontrol.patch
Add the basic GSM flowcontrol code.
Signed-off-by: Mike Westerhof <mwester at dls.net>
commit 436204281bcd1fe5999ad6589ea7ab1b5360c352
Author: Andy Green <andy at openmoko.com>
Date: Thu Aug 7 16:27:33 2008 +0100
config-add-udf-support.patch
Timo noticed that his compound USB device wasn't getting recognized properly,
it was stuck on the CD-ROM class part of it. This was accepted by the GTA02
but no scsi device was spawned for it. He figured out in the end that it is
the lack of a UDF filesystem module that was the problem.
This patch adds UDF and CDROM as a built-in on defconfig-2.6.24, for the
modular configs it just adds it as a module.
Reported-by: Timo Drick <timo at drick.de>
Signed-off-by: Andy Green <andy at openmoko.com>
commit e8780c02d307380e9e08d1b85888a599d53078ac
Author: Andy Green <andy at openmoko.com>
Date: Thu Aug 7 16:27:21 2008 +0100
config-remove-evbug-module.patch
Carsten mentioned that evbug module is getting modprobed in
to ASU somehow and making havoc. This patch stops us building
it because there's no time to figure out why it gets modprobed
in and it doesn't seem to do anything but spew syslog -- and we
never needed it before now.
Reported-by: Carsten Haitzler <raster at openmoko.org>
Signed-off-by: Andy Green <andy at openmoko.com>
commit 2f36cf3d6a324af5c43f9d6bfded95d7c1a9c532
Author: Holger Freyther <zecke at openmoko.org>
Date: Thu Aug 7 16:27:12 2008 +0100
From fa269b44512a03523b164c3cebc20312748c524b Mon Sep 17 00:00:00 2001
Subject: [PATCH] [ar6k] Build the wireless driver without DEBUG
- Remove DEBUG from the Makefile
- Do not send events through netlink to userspace. We might
need to reevaluate this. But we seem to use wireless_send_event
at the right places.
(SEND_EVENT_TO_APP)
- Do not report debug logs to apps
(REPORT_DEBUG_LOGS_TO_APP)
Signed-Off-By: Holger Freyther <zecke at openmoko.org>
commit c596d9067aa789a62e51df89917680eabe6453e2
Author: Andy Green <andy at openmoko.com>
Date: Thu Aug 7 12:20:37 2008 +0100
add-build-makerecovery.patch
This patch adds a script that creates a "recovery kernel" image
from a recovery-uImage-moredrivers-... image. The use of these
recovery images is explained here:
http://wiki.openmoko.org/wiki/Freerunner_backup_kernel
Signed-off-by: Andy Green <andy at openmoko.com>
commit 2c55337cb0cde08203df321a108409b7e33e6904
Author: Andy Green <andy at openmoko.com>
Date: Wed Aug 6 23:13:28 2008 +0100
fix-build-hash-name-no-colon-separator.patch
Suggested-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
Colons are not very friendly for tar... scp has trouble too but
you can override that by prepending any path like ./ ... still
better to dilute the colon down to a _ avoiding - because it can
appear in branch names we use.
Signed-off-by: Andy Green <andy at openmoko.com>
commit b79f79448a70b5718db2428939e00150315b5eda
Author: Andy Green <andy at openmoko.com>
Date: Wed Aug 6 20:46:42 2008 +0100
add-buildkeep-hash-named-copy.patch
Keep a copy of last "moredrivers" config kernel built stamped with
branch and git head at build time.
Signed-off-by: Andy Green <andy at openmoko.com>
commit 0c67caf29d655f9ce1c53f8e1433c59d86e04193
Author: Andy Green <andy at openmoko.com>
Date: Wed Aug 6 20:27:23 2008 +0100
add-build-git-head-info.patch
This patch adds the branch and truncated head has to the version of the
kernel
# cat /proc/version
Linux version 2.6.26-andy-2.6.26:2b3bf342baac52b9-mokodev (agreen at pads.home.warmcat.com) (gcc version 4.1.2) #878 PREEMPT Sun Jul 27 14:45:25 BST 2008
Note this versioning is visible down /lib/modules
Signed-off-by: Andy Green <andy at openmoko.com>
commit 27fc8d82e365c47065f3a9240bfe21e67a50edf2
Author: Andy Green <andy at openmoko.com>
Date: Wed Aug 6 15:08:34 2008 +0100
fix-pcf50633-usbrem-charging-led.patch
If the charger was removed, we fell through back to old
hdq-driven code with normally wrong but slightly random
results for charging LED behaviour in that circumstance
This patch makes us use the tracked charger status
callbacks alone if they are defined in the platform
data.
Signed-off-by: Andy Green <andy at openmoko.com>
More information about the commitlog
mailing list