development kernel tree: Changes to 'andy'

git at git.openmoko.org git at git.openmoko.org
Sat May 10 10:54:26 CEST 2008


Rebased ref, commits from common ancestor:
commit 9874b0c4e78c83ea9911b758b4efb6c5c4046c2c
Author: Holger Freyther <zecke at openmoko.org>
Date:   Sat May 10 09:50:18 2008 +0100

    Disable low level debugging, make the s3c24xx PM debug code depend on DEBUG_LL
    
    Hey,
    where are slowly getting into the product state, low level debugging is
    supposed to be turned off there. :)
    
    z
    
    
    
    From 6448f0a521c05c5ba6672f5908c55583974ce1ed Mon Sep 17 00:00:00 2001
    From: Holger Freyther <zecke at openmoko.org>
    Date: Fri, 9 May 2008 19:56:31 +0200
    Subject: [PATCH] [debug] Disable low level debugging for the product
         Disable low level debugging in the defconfig-gta02 and
         the s3c pm code used printascii which is only available
         with low level debugging, update the Kconfig entry for
         this pm debugging support to depend on low level debugging
    
    Signed-Off-By: Holger Freyther <zecke at openmoko.org>

commit 29de7ee2c26394285eef3517ba8b08a528b0be6b
Author: Holger Freyther <zecke at openmoko.org>
Date:   Sat May 10 09:50:18 2008 +0100

    [power] Use the bq27000 battery to provide charging values for apm
        Built the apm emulation for gta02 and say that the gta02 battery
        is supposed to be used for this apm emulation.
    
    Signed-Off-By: Holger Freyther <zecke at openmoko.org>

commit e7db1df945addfbf230ec93f8d67b05d9aaa6edd
Author: Holger Freyther <zecke at openmoko.org>
Date:   Sat May 10 09:50:18 2008 +0100

    [pcf50633] Disable debugging statements as the driver is working well
    
    Signed-Off-By: Holger Freyther <zecke at openmoko.org>

commit 1a7c48e0c3fa28a4dcc08e7dc010b8497950ff85
Author: Holger Freyther <ich at tamarin.(none)>
Date:   Sat May 10 09:50:17 2008 +0100

    [pcf50633] Assume that all gta02's have a battery with coulumb counter
        For the gta02 and the bq27000 battery it does not make sense to use the
        ADC to get the current voltage. Under the assumption that all mass
        production gta02's have such batteries it does not make any sense to
        forward this value to APM.
    
    Signed-Off-By: Holger Freyther <zecke at openmoko.org>

commit b6f402a2ec1eafb083d92066a3c15d7fbb226b77
Author: Holger Freyther <ich at tamarin.(none)>
Date:   Sat May 10 09:50:17 2008 +0100

    [pcf50633] Add exported symbol to the header file
        Reading the battery volt using the ADC was an exported symbol
        but not in the header file, add it.
    
    Signed-Off-By: Holger Freyther <zecke at openmoko.org>

commit 5a719448c11b1922c4753558fc8a80da5f51106a
Author: Holger Freyther <ich at tamarin.(none)>
Date:   Sat May 10 09:50:17 2008 +0100

    [pcf50633] Print less debugging messages
        According to the comments in the code we have to read
        INT1 - INT5 in case of any interrupt. So even if we have masked
        out the periodic timer interrupt we were able to see that it
        fired. Only print that we got a SECOND interrupt if we are actually
        interested in the periodic tick. From a brief look at the datasheet there
        is no way to stop the periodic tick.
    
    Signed-Off-By: Holger Freyther <zecke at openmoko.org>

commit 862c4c2edd091493f6194906dd52b524c54ffc67
Author: Holger Freyther <ich at tamarin.(none)>
Date:   Sat May 10 09:50:17 2008 +0100

    Explain why we want SECOND to kick.
        We do not mask the SECOND interrupt to make sure that we get
        a interrupt at the beginning. We use this for the coldplug_done
        initisalisation.
        So pcf->flags and INT1M is out of sync at the beginning but after the
        first SECOND interrupt it will be put into sync.
    
    Signed-Off-By: Holger Freyther <zecke at openmoko.org>

commit 2ad824e8a5baa96454faf654f019c257e2c9d7ff
Author: Andy Green <andy at openmoko.com>
Date:   Sat May 10 09:50:17 2008 +0100

    From: Andy Green <andy at openmoko.com>
    fix-suppress-cpu-suspend-save-restore-messages.patch
    
    syslog is crapped up with a ton of junk on suspend and resume
    
    Signed-off-by: Andy Green <andy at openmoko.com>

commit 5fe53bad32ec99e34dda2465c72d9ada31c8f070
Author: Andy Green <andy at openmoko.com>
Date:   Sat May 10 09:50:15 2008 +0100

    From: Andy Green <andy at openmoko.com>
    fix-force-backlight-down-on-glamo-suspend.patch
    
    There's a bit of a flash when glamo goes into suspend
    but LCM is still seeing white pixels.  This kills the
    backlight before we stop producing meaningful video.
    
    Signed-off-by: Andy Green <andy at openmoko.com>





More information about the commitlog mailing list