development kernel tree: Changes to 'andy'
git at git.openmoko.org
git at git.openmoko.org
Sat May 10 10:59:46 CEST 2008
Rebased ref, commits from common ancestor:
commit 596558626973881c0d5b3af5ede885fd1e9ff456
Author: Holger Freyther <zecke at openmoko.org>
Date: Sat May 10 09:59:28 2008 +0100
Disable low level debugging, make the s3c24xx PM debug code depend on DEBUG_LL
Hey,
where are slowly getting into the product state, low level debugging is
supposed to be turned off there. :)
z
From 6448f0a521c05c5ba6672f5908c55583974ce1ed Mon Sep 17 00:00:00 2001
From: Holger Freyther <zecke at openmoko.org>
Date: Fri, 9 May 2008 19:56:31 +0200
Subject: [PATCH] [debug] Disable low level debugging for the product
Disable low level debugging in the defconfig-gta02 and
the s3c pm code used printascii which is only available
with low level debugging, update the Kconfig entry for
this pm debugging support to depend on low level debugging
Signed-Off-By: Holger Freyther <zecke at openmoko.org>
commit d7b526219eb5e8a44242f04a8ce8814562d6936e
Author: Holger Freyther <zecke at openmoko.org>
Date: Sat May 10 09:59:28 2008 +0100
[power] Use the bq27000 battery to provide charging values for apm
Built the apm emulation for gta02 and say that the gta02 battery
is supposed to be used for this apm emulation.
Signed-Off-By: Holger Freyther <zecke at openmoko.org>
commit 7728c1ebe968191df8130885c19984d75c9e8d65
Author: Holger Freyther <zecke at openmoko.org>
Date: Sat May 10 09:59:28 2008 +0100
[pcf50633] Disable debugging statements as the driver is working well
Signed-Off-By: Holger Freyther <zecke at openmoko.org>
commit 44d0affe48db853ef475da10e908e9e335693d48
Author: Holger Freyther <ich at tamarin.(none)>
Date: Sat May 10 09:59:28 2008 +0100
[pcf50633] Assume that all gta02's have a battery with coulumb counter
For the gta02 and the bq27000 battery it does not make sense to use the
ADC to get the current voltage. Under the assumption that all mass
production gta02's have such batteries it does not make any sense to
forward this value to APM.
Signed-Off-By: Holger Freyther <zecke at openmoko.org>
commit 5fe4ca3e4c41f64117eb0d48308f3879fed288bc
Author: Holger Freyther <ich at tamarin.(none)>
Date: Sat May 10 09:59:28 2008 +0100
[pcf50633] Add exported symbol to the header file
Reading the battery volt using the ADC was an exported symbol
but not in the header file, add it.
Signed-Off-By: Holger Freyther <zecke at openmoko.org>
commit dada30dffe5a4a51eba1e08509966914da3a7e28
Author: Holger Freyther <ich at tamarin.(none)>
Date: Sat May 10 09:59:28 2008 +0100
[pcf50633] Print less debugging messages
According to the comments in the code we have to read
INT1 - INT5 in case of any interrupt. So even if we have masked
out the periodic timer interrupt we were able to see that it
fired. Only print that we got a SECOND interrupt if we are actually
interested in the periodic tick. From a brief look at the datasheet there
is no way to stop the periodic tick.
Signed-Off-By: Holger Freyther <zecke at openmoko.org>
commit 1ad3c136955c01eb9b093915625a325b67dff43b
Author: Holger Freyther <ich at tamarin.(none)>
Date: Sat May 10 09:59:28 2008 +0100
Explain why we want SECOND to kick.
We do not mask the SECOND interrupt to make sure that we get
a interrupt at the beginning. We use this for the coldplug_done
initisalisation.
So pcf->flags and INT1M is out of sync at the beginning but after the
first SECOND interrupt it will be put into sync.
Signed-Off-By: Holger Freyther <zecke at openmoko.org>
commit 225b3031426564e951ed1537d2caade260489473
Author: Andy Green <andy at openmoko.com>
Date: Sat May 10 09:59:28 2008 +0100
fix-suppress-cpu-suspend-save-restore-messages.patch
syslog is crapped up with a ton of junk on suspend and resume
Signed-off-by: Andy Green <andy at openmoko.com>
commit 2b30dde82a2cc2f215a07e5ab496b5190064f3b7
Author: Andy Green <andy at openmoko.com>
Date: Sat May 10 09:59:15 2008 +0100
fix-force-backlight-down-on-glamo-suspend.patch
There's a bit of a flash when glamo goes into suspend
but LCM is still seeing white pixels. This kills the
backlight before we stop producing meaningful video.
Signed-off-by: Andy Green <andy at openmoko.com>
commit 7b9af3c04cf03cbd6fcce98323c338d893a8ac8b
Author: Andy Green <andy at openmoko.com>
Date: Sat May 10 09:58:57 2008 +0100
fix-backlight-disable-on-zero-intensity.patch
It's never right to put 0 intensity into LEDOUT according to datasheet
But having a floor at intensity 2 means backlight isn't properly off
when "dimmed". So change to intensity 0 --> disable backlight.
Signed-off-by: Andy Green <andy at openmoko.com>
More information about the commitlog
mailing list