r5217 - in trunk/gta02-core: . docs/ecn
Duncanla at docs.openmoko.org
Duncanla at docs.openmoko.org
Fri Jun 26 06:26:48 CEST 2009
Author: Duncanla
Date: 2009-06-26 06:26:48 +0200 (Fri, 26 Jun 2009)
New Revision: 5217
Modified:
trunk/gta02-core/docs/ecn/ecn0001.txt
trunk/gta02-core/docs/ecn/ecn0016.txt
trunk/gta02-core/io.sch
Log:
Updated ECNs 1 & 16 to reflect changes that were made to the schematics.
X'ed out unused pins in io.sch.
Modified: trunk/gta02-core/docs/ecn/ecn0001.txt
===================================================================
--- trunk/gta02-core/docs/ecn/ecn0001.txt 2009-06-26 04:03:20 UTC (rev 5216)
+++ trunk/gta02-core/docs/ecn/ecn0001.txt 2009-06-26 04:26:48 UTC (rev 5217)
@@ -1,10 +1,13 @@
Remove Glamo (U1801)
+Changes:
+- Removed Glamo (U1801) and related passives
+- LCM pixel data reassigned directly to screen
+- LCM controller SPI moved to GPIO (GPG-5-7)
+- LCD_xRES signal moved to GPD9
+- LP Filters for LCM interface rearranged for better organization
To do:
-- components to remove
-- reassign LCM pixel data (check voltage domain !)
-- reassign LCM controller SPI (check voltage domain !)
- reassign SD/MMC
- move WLAN to SPI
- software impact of LCM pixel change on kernel
Modified: trunk/gta02-core/docs/ecn/ecn0016.txt
===================================================================
--- trunk/gta02-core/docs/ecn/ecn0016.txt 2009-06-26 04:03:20 UTC (rev 5216)
+++ trunk/gta02-core/docs/ecn/ecn0016.txt 2009-06-26 04:26:48 UTC (rev 5217)
@@ -13,6 +13,10 @@
Items to add:
- NC pullup resistor to second interrupt (INT2) of remaining sensor
+Changes:
+- Moved CS signal of remaining sensor to GPG0
+- Connected INT2 of remaining sensor to GPG8 (formerly INT1 of other sensor)
+
To do:
- why the upper ?
- connect both interrupts (motivation)
Modified: trunk/gta02-core/io.sch
===================================================================
--- trunk/gta02-core/io.sch 2009-06-26 04:03:20 UTC (rev 5216)
+++ trunk/gta02-core/io.sch 2009-06-26 04:26:48 UTC (rev 5217)
@@ -13,6 +13,25 @@
Comment3 ""
Comment4 ""
$EndDescr
+NoConn ~ 5850 8000
+NoConn ~ 5850 7900
+NoConn ~ 5850 7800
+NoConn ~ 5850 7700
+NoConn ~ 5850 7600
+NoConn ~ 5850 7550
+NoConn ~ 5850 7500
+NoConn ~ 5850 7400
+NoConn ~ 5850 6900
+NoConn ~ 5850 6800
+NoConn ~ 5850 6700
+NoConn ~ 5850 6600
+NoConn ~ 5850 6400
+NoConn ~ 5850 6300
+NoConn ~ 5850 6200
+NoConn ~ 5850 6100
+NoConn ~ 5850 6000
+NoConn ~ 5850 5900
+NoConn ~ 5850 5800
Text Notes 1700 1700 0 200 ~
I/O
NoConn ~ 10800 2950
More information about the commitlog
mailing list