Community update: GSM firmware, 850MHz experiment, GTA02 progress
Michael Shiloh
michael at openmoko.org
Mon Dec 10 22:40:01 CET 2007
Yes, but not the recalibration or the firmware changes.
One step at a time - let's see if these units work, and if so, we'll
look into if there is any way to tackle the other issues.
Michael
Cliff Brake wrote:
> I would also be very interested in re-work instructions for modifying
> a GTA01 to support 850MHz as many of us are capable doing circuit
> modifications.
>
> Thanks,
> Cliff
>
> On Dec 10, 2007 9:32 AM, Mark <markitect at gmail.com> wrote:
>> In regards to the 850MHz Issue:
>> It seems that very little effort was required to switch a phone board
>> to 850 for testing. So my question is what exactly is involved. Was
>> it simply switching which pin is attached to the antenna? If it is a
>> relatively simple circuit change and involving only a top (or bottom)
>> layer trace, is it possible to tell us what connections to change to
>> convert an existing unit to 850MHz. Obviously only for the very
>> experienced people. If there is different capacitor, etc required to
>> match the frequency it might be less doable, but details would be
>> nice. once the design has been confirmed. On a side note this is
>> excellent news that the 850 variant may not be far behind GTA02.
>>
>> Mark
>>
>> Mark
>>
>>
>> _______________________________________________
>> OpenMoko community mailing list
>> community at lists.openmoko.org
>> http://lists.openmoko.org/mailman/listinfo/community
>>
>
>
>
More information about the community
mailing list