Debian on FreeRunner
Daniel Benoy
daniel at benoy.name
Thu Aug 7 19:46:12 CEST 2008
root at lisa:~# cat /mnt/debian/etc/pointercal
557 38667 -4654632 -51172 121 46965312 65536
root at lisa:~# cat /mnt/debian/etc/ts.conf
# Uncomment if you wish to use the linux input layer event interface
module_raw input
# Uncomment if you're using a Sharp Zaurus SL-5500/SL-5000d
# module_raw collie
# Uncomment if you're using a Sharp Zaurus SL-C700/C750/C760/C860
# module_raw corgi
# Uncomment if you're using a device with a UCB1200/1300/1400 TS interface
# module_raw ucb1x00
# Uncomment if you're using an HP iPaq h3600 or similar
# module_raw h3600
# Uncomment if you're using a Hitachi Webpad
# module_raw mk712
# Uncomment if you're using an IBM Arctic II
# module_raw arctic2
module pthres pmin=1
module variance delta=30
module dejitter delta=100
module linear
root at lisa:~# diff /etc/pointercal /mnt/debian/etc/pointercal
root at lisa:~# diff /etc/ts.conf /mnt/debian/etc/ts.conf
--- /etc/ts.conf Wed Dec 31 19:00:00 1969
+++ /mnt/debian/etc/ts.conf Sun Feb 3 15:05:58 2008
@@ -1,5 +1,5 @@
# Uncomment if you wish to use the linux input layer event interface
-module_raw input grab_events=1
+module_raw input
# Uncomment if you're using a Sharp Zaurus SL-5500/SL-5000d
# module_raw collie
On Thursday 07 August 2008 13:21:30 Gregoire Gentil wrote:
> Daniel,
>
> Thanks for the answer. It's not working for me. I don't have any more
> the delta but there is a scale problem (top left corner matches but
> bottom right corner doesn't at all).
>
> Can you please copy paste your /etc/ts.conf and /etc/pointercal here?
>
> Thanks,
>
> Grégoire
>
>
> On Thu, 2008-08-07 at 13:01 -0400, Daniel Benoy wrote:
> > I copied my /etc/pointercal from internal flash (Which can be mounted from within debian as /dev/mtdblock6, I believe)
> >
> > That worked for me. :) Hope that helps.
> >
> > I wished that the openmoko team used Debian instead of openembedded.. I wish I could just apt-get stuff instead of having to struggle with opkg .. and busybox annoys me sometimes.
> >
> > On Thursday 07 August 2008 12:20:11 Gregoire Gentil wrote:
> > > Hello,
> > >
> > > After much efforts (but thanks for the page ;-) ), I have managed to
> > > install this on my microSD card:
> > > http://wiki.openmoko.org/wiki/Debian
> > >
> > > I can reach the gdm screen but the calibration of the touchscreen is
> > > totally flaky.
> > >
> > > After another set of painful efforts, I have managed to install
> > > libts-bin and run ts_calibrate. If you want to know, you need to do this
> > > from the terminal over the USB-connection:
> > >
> > > export TSLIB_CALIBFILE="/etc/pointercal"
> > > export TSLIB_CONFFILE="/etc/ts.conf"
> > > export TSLIB_PLUGINDIR="/usr/lib/ts"
> > > export TSLIB_FBDEVICE=/dev/fb0
> > > export TSLIB_CONSOLEDEVICE=none
> > > export TSLIB_TSDEVICE=/dev/input/event1
> > > ts_calibrate
> > >
> > > I get some numbers on /etc/pointercal but there are quite different if I
> > > run ts_calibrate a few times. In any case, the touchscreen is still
> > > totally mad and I can't use xvkbd to input the login info. In the best
> > > case scenario, the pointer is around 200x200 pixels NW from the touch.
> > >
> > > Then, I have played with xorg.conf. I have tried the rotate option and
> > > many other things, but unsuccessfully.
> > >
> > > Any idea? Thanks in advance,
> > >
> > > Gregoire
> > >
> > > PS: In case, you ask:
> > >
> > > more /etc/ts.conf
> > > # Uncomment if you wish to use the linux input layer event interface
> > > module_raw input
> > >
> > > # Uncomment if you're using a Sharp Zaurus SL-5500/SL-5000d
> > > # module_raw collie
> > >
> > > # Uncomment if you're using a Sharp Zaurus SL-C700/C750/C760/C860
> > > # module_raw corgi
> > >
> > > # Uncomment if you're using a device with a UCB1200/1300/1400 TS
> > > interface
> > > # module_raw ucb1x00
> > >
> > > # Uncomment if you're using an HP iPaq h3600 or similar
> > > # module_raw h3600
> > >
> > > # Uncomment if you're using a Hitachi Webpad
> > > # module_raw mk712
> > >
> > > # Uncomment if you're using an IBM Arctic II
> > > # module_raw arctic2
> > >
> > > module pthres pmin=1
> > > module variance delta=30
> > > module dejitter delta=100
> > > module linear
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > Openmoko community mailing list
> > > community at lists.openmoko.org
> > > http://lists.openmoko.org/mailman/listinfo/community
> > >
> >
> > p
> >
>
>
--
Daniel Benoy
http://daniel.benoy.name
--
Daniel Benoy
http://daniel.benoy.name
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 307 bytes
Desc: This is a digitally signed message part.
Url : http://lists.openmoko.org/pipermail/community/attachments/20080807/84365e99/attachment.pgp
More information about the community
mailing list