Openmoko Om 2008.8 Release

[Martin Šenkeřík]

Maybe can help reflashing your u-boot with some actual version...


On Fri, Aug 8, 2008 at 4:04 PM, Olivier Berger <oberger at ouvaton.org> wrote:
> Olivier Berger <oberger at ouvaton.org> writes:
>
>> "Yorick Moko" <yorickmoko at gmail.com> writes:
>>
>>> a tar.gz file would be very useful for booting from SD card...
>>>
>>
>> I guess you may convert the contents of the JFFS2 to a tarball by
>> following bits explained here :
>> http://maemo.org/community/wiki/ModifyingRootImage/
>>
>> In particular somthing like this on a desktop GNU/Linux (if you run
>> 2.6 kernel) :
>>
>> mknod /tmp/mtdblock0 b 31 0
>> modprobe loop
>> losetup /dev/loop0 Om2008.8.rootfs.jffs2
>> modprobe mtdblock
>> modprobe block2mtd
>> echo "/dev/loop0" > /sys/module/block2mtd/parameters/block2mtd
>> modprobe jffs2
>> mount -t jffs2 /tmp/mtdblock0 /media/jffs2
>>
>> USE IT AT YOUR OWN RISKS ;)
>>
>
> I've just tried and install it like that on the SD's ext3 partition,
> and copied the kernel to the first partition (VFAT).
>
> But after booting, I'm stuck with a :
> Kernel panic - not syncing: No int found. Try passing init= option to
> kernel.
>
> Too bad :( I'll have to flash ?
>
> Best regards,
> --
> Olivier BERGER
> (OpenPGP: 1024D/B4C5F37F)
> http://www.olivierberger.com/weblog/
>
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community
>