GPRS working / gsm0710mux (works now for me)

Brad Pitcher bradpitcher at gmail.com
Tue Aug 19 21:47:27 CEST 2008


Benedikt Schindler wrote:
> Hi,
>
> some corrections on my own mail.
> first off all it works now for me.
> second, it's not an update that causes the problem.... it is not to 
> update... :)
>
> the whole howto on freeyourphone.de  is written for the 
> Om2007.2/ASU-buildhost version.
>
> 2008/8/12 xaos x <xaos at xaositects.com>:
>
>   
>>> I actually finally got it working by using the article from freeyourphone that uses the multiplexing package.
>>>
>>> http://freeyourphone.de/portal_v1/viewtopic.php?f=21&t=295&start=0&st=0&sk=t&sd=a&sid=dda5c6cbf5850182c786488123f056ce
>>>
>>> It will receive calls and make calls while connected to GPRS using this setup.
>>>
>>> -Tom
>>>       
>>   
>>     
> it is not for an Om2008.8. the only reason why it worked for some people was, that they used the buildhost feeds again.
> (What is absolutly the wrong thing to do ! - But i did it too in the first time)
> So for them it all works fine.
>
> Now i have the correct feeds, and the howto doesn't work anymore.
> That is because of a different version of the gsm0710muxd application.
>
> The howto works fine also with Om2008.8.
> You just have to install these package before you use the howto from freeyourphone:
>
> opkg -force-depends install 
> http://buildhost.openmoko.org/daily-feed/armv4t/gsm0710muxd_0.9.1+gitr1+3ff86b129640b647ccba3d86eb243d864671b039-r0_armv4t.ipk
>
> Attention: just use this package, and no other packages from this host! 
> This host is normaly not compatible with the Om2008.8 !!!
>
> have a nice time with gprs until the offical gprs is comming up soon.
>
> cu all
> Beni
>
>
> P.S.:
> the mokoservice.py doesn't work for me.
> i use "gprson && gprsqison" to get into it.
> sometimes it doesn't work on the first time, and i have to try it a 
> litle bit later again.
>
>
> Benedikt Schindler schrieb:
>   
>> ok. i found out, that a upgrade from gsm0710mux is the problem.
>> they now have a different service name for the "muxer".
>> it isn't "org.pyneo.muxer" anymore it's now "org.mobile.mux".
>>
>> you could edit "/etc/X11/Xsession.d/89qtopia" so it uses the new term,
>> (and also the "/usr/bin/gprson" script)
>> or add an additional service file to /usr/share/dbus-1/system-services/
>>
>> ----------
>>
>> root at om-gta02:~# cat 
>> /usr/share/dbus-1/system-services/org.pyneo.muxer.service
>> [D-BUS Service]
>> Name=org.pyneo.muxer
>> #Name=org.freesmartphone.GSM.MUX
>> Exec=/usr/bin/gsm0710muxd
>> User=root
>>
>> -----------
>>
>> But now i have the problem that i get this errors in my log:
>>
>> Aug 16 22:26:45 om-gta02 user.notice root: Waiting for pid: 1545
>> Aug 16 22:26:47 om-gta02 user.notice root: ficgta01hardware plugin
>> Aug 16 22:26:48 om-gta02 user.notice root: Modem :  opening serial 
>> device  "/dev/ttySAC0"  at  115200
>> Aug 16 22:26:48 om-gta02 user.notice root: Modem :  Device: 
>> "/dev/ttySAC0" is a tty device: True
>> Aug 16 22:26:48 om-gta02 user.notice root: Modem :  NONBLOCK 
>> successfully reset
>> Aug 16 22:26:48 om-gta02 user.notice root: Modem :  Opened  "/dev/ttySAC0"
>> Aug 16 22:26:48 om-gta02 user.notice root: Modem :  querying multiplexer 
>> plugin "ficgta01multiplex"
>> Aug 16 22:26:48 om-gta02 user.notice root: AtChat :  T : "^Z"
>> Aug 16 22:26:58 om-gta02 user.notice root: Mux :  *** mux setup timed 
>> out ***
>> Aug 16 22:26:58 om-gta02 user.notice root: AtChat :  T : "^Z"
>> [last two lines repeat until a exit of the programm]
>>
>>
>> I think the "T" should be an "AT". so i try some different "gsm0710mux"  
>> today.
>> maybe i found something that works.
>>
>> cu later
>>
>> [btw:  answers from could have some delay, because i am on vacation and 
>> i don't have often internet without my gprs working on the freerunner.]
>>
>>   
>>     
>
>
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community
>   
Thanks for the tips!  It's really great to have gprs working perfectly 
on 2008.8.  I have no problems running mokoservices.py either.
cheers,
Brad




More information about the community mailing list