Problem flashing NAND

[Mike Doody]

On Tue, Aug 26, 2008 at 4:12 PM, Dennis Wollersheim
<d.wollersheim at latrobe.edu.au> wrote:
> My steps:
>
> - - boot into NOR menu
> - - Connect via neocon to freerunner
> - - issue commands (from "Booting from SDcard wiki page):
>
> setenv menu_9 Boot from microSD (FAT+ext3): setenv bootargs
> \${bootargs_base} rootfstype=ext3 root=/dev/mmcblk0p2 rootdelay=5
> \${mtdparts} ro\; mmcinit\; fatload mmc 1 0x32000000 \${sd_image_name}\;
> bootm 0x32000000
>
> saveenv
>
> neo1973 poweroff
>
>
> Then, when I boot into the NAND menu (holding first the ON then AUX
> buttons), I get the stock standard NAND menu, with no additional menu
> items.  Am I doing something wrong here?
>
>
>
> Thanks
> Dennis
>

What happens if you boot into NOR again? Do you see your new menu item?
I think you have to boot into NAND uboot to modify it's menu.