microsSD doesn't mount any more!

[Tony Berth]

On Fri, Dec 5, 2008 at 2:45 PM, Andy Green <andy at openmoko.com> wrote:

> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Somebody in the thread at some point said:
>
> | When in BootLoader, shows that there is a card of 3MB!!!! and when I
> | boot with the latest 2008.9 jffs I get following dmesg output:
>
> U-Boot driver doesn't understand enough SHDC to get this right, but it
> doesn't hurt anything unless you try to get U-Boot to touch anything
> above 4GB.
>
> | ....
> | [   30.365000] Buffer I/O error on device mmcblk0, logical block 8
>
> Are there some glamo-mci errors floating around before that?
>
> - -Andy
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.9 (GNU/Linux)
> Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org
>
> iEYEARECAAYFAkk5MHYACgkQOjLpvpq7dMrj9QCfbXf7x2O6jtB0X+SfRTv/0e8k
> M2gAnjxeXYIDq53UrZC+mcAhm1zI02fR
> =jDld
> -----END PGP SIGNATURE-----
>
>
here it is:

-----------------------
[   30.225000] glamo-mci glamo-mci.0: Error after cmd: 0x8020
[   30.225000] mmcblk0: error -110 sending read/write command
[   30.230000] end_request: I/O error, dev mmcblk0, sector 0
[   30.230000] Buffer I/O error on device mmcblk0, logical block 0
[   30.240000] glamo-mci glamo-mci.0: Error after cmd: 0x20
[   30.240000] glamo-mci glamo-mci.0: Error after cmd: 0x120
[   30.245000] mmcblk0: error -110 sending read/write command
[   30.250000] end_request: I/O error, dev mmcblk0, sector 8
[   30.250000] Buffer I/O error on device mmcblk0, logical block 1
[   30.255000] glamo-mci glamo-mci.0: Error after cmd: 0x8020
[   30.255000] glamo-mci glamo-mci.0: Error after cmd: 0x8122
[   30.260000] mmcblk0: error -84 sending read/write command
[   30.265000] end_request: I/O error, dev mmcblk0, sector 16
[   30.265000] Buffer I/O error on device mmcblk0, logical block 2
[   30.270000] glamo-mci glamo-mci.0: Error after cmd: 0x20
[   30.275000] glamo-mci glamo-mci.0: Error after cmd: 0x122
[   30.280000] mmcblk0: error -84 sending read/write command
[   30.285000] end_request: I/O error, dev mmcblk0, sector 24
[   30.285000] Buffer I/O error on device mmcblk0, logical block 3
[   30.300000] glamo-mci glamo-mci.0: Error after cmd: 0x8020
[   30.300000] mmcblk0: error -110 sending read/write command
[   30.305000] end_request: I/O error, dev mmcblk0, sector 0
[   30.305000] Buffer I/O error on device mmcblk0, logical block 0
[   30.360000] glamo-mci glamo-mci.0: Error after cmd: 0x20
[   30.360000] mmcblk0: error -110 sending read/write command
[   30.365000] end_request: I/O error, dev mmcblk0, sector 64
[   30.365000] Buffer I/O error on device mmcblk0, logical block 8
[   34.830000] FAT: bogus logical sector size 65535
[   34.830000] VFS: Can't find a valid FAT filesystem on dev mmcblk0.
[   34.840000] FAT: bogus logical sector size 65535
[   34.840000] VFS: Can't find a valid FAT filesystem on dev mmcblk0.

------------------------

Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/community/attachments/20081205/4e28b3a7/attachment.htm