[qtopia on freerunner] - What is the right place to discuss Qtopia on Openmoko?

[Randy S.]

I should clarify: After the change, a boot would end up showing the UI
momentarily (a few seconds) then the black screen.


On Sat, Jul 12, 2008 at 3:04 PM, Randy S. <randypower at gmail.com> wrote:

> Lorn, since making this change, I have not been able to boot the device
> successfully into Qtopia again.
>
>
>
>
> On Fri, Jul 11, 2008 at 4:12 PM, Lorn Potter <lpotter at trolltech.com>
> wrote:
>
>> Randy S. wrote:
>> > Great! Here's what I've got.
>> > 1. Often, a startup seems to fail. This always happens when I use NAND
>> > u-Boot (a 7-10-2008 version), but usually is OK with u-Boot from NOR (I
>> > think it's a May 2008 version).
>> Try this:
>> Quickfix is to ssh into device, edit /etc/init.d/qpe and remove the lines:
>> -#crappy workaround for some weird suspend bug
>> -rm /dev/ttySAC0
>> -mknod /dev/ttySAC0 c 204 64 -m 660
>> -chgrp dialout /dev/ttySAC0
>> -
>>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/community/attachments/20080712/404bdc19/attachment.htm