gsmd correctness question

[Michael 'Mickey' Lauer]

On Monday 02 June 2008 15:11:17 Bin Chen wrote:
> On Mon, Jun 2, 2008 at 9:04 PM, Michael 'Mickey' Lauer
>
> <mickey at openmoko.org> wrote:
> > On Monday 02 June 2008 11:34:07 Bin Chen wrote:
> >> I am just looking at the code of gsmd2, I doubt whether a condition
> >> has been processed. Suppose a command is send but during the wait time
> >> of the response, another unsolicited command sent to the AP and the
> >> name is the same:
> >>
> >> AT+CREG?
> >>
> >> +CREG: 2  (1)
> >>
> >> +CREG: 0,1 (2)
> >>
> >> The (1) is an unsolicited command from BP side but the (2) is the
> >> actual response for the AT+CREG? command, if this case happens, has
> >> gsmd2 processed it correctly?
> >
> > I don't know about gsmd2 offhand, however in general there are two ways
> > to deal with this problem:
> >
> > 1.) Disable sending unsolicited responses between commands. There's a
> > 07.07 command to control that.
> >
> > 2.) Allow sending unsolicited responses at all times (this is better for
> > latency) and dedicate an own GSM channel for unsolicited responses.
>
> How to? If enable this maybe the 07.10(MUX) must be enabled?

Correct. ophoned uses the Calypso in MUX mode by utilizing gsm0710muxd.

:M: