USB Networking
Tony Berth
tonyberth at googlemail.com
Thu Nov 6 12:04:13 CET 2008
done!
Thanks
On Thu, Nov 6, 2008 at 11:01 AM, Max Giesbert <giesbert at exactt.de> wrote:
> @Tone Berth: The wiki is a community thing. You should update it yourself.
>
> Tony Berth schrieb:
> > Indeed that was the problem. 'allow-hotplug' instead of 'auto' is the
> > solution! PLEASE correct the WIKI asap!
> >
> > Thanks for your prompt support
> >
> > Cheers
> >
> > Tony
> >
> > On Wed, Nov 5, 2008 at 10:13 PM, joezeewails <joezeewails at yahoo.de
> > <mailto:joezeewails at yahoo.de>> wrote:
> >
> > Stefan Monnier wrote:
> > >
> > > That's probably not right. You probably want to try "allow-hotplug
> > > ubs0" instead. "auto" means to do it at boot time and it may just
> > fail
> > > if (for some reason) the usb0 interface is not yet created.
> > >
> > >
> > > Stefan
> > >
> > I could confirm this.
> > It doesn't work with "auto usb0" with "allow-hotplug usb0" it works
> just
> > fine.
> > Every time I plug the Freerunner in my debian etch it brings the
> > interface up.
> > I use the version from the wiki with a extra freerunner script.
> >
> > My entry in /etc/network/interfaces:
> >
> > #freerunner
> > allow-hotplug usb0
> > iface usb0 inet static
> > address 192.168.0.200 <http://192.168.0.200>
> > netmask 255.255.255.0 <http://255.255.255.0>
> > post-up /etc/network/freerunner start
> > pre-down /etc/network/freerunner stop
> >
> >
> >
> > Someone should correct the wiki, should I?
> >
> >
> > Cheers,
> > Joe
> >
> >
> > _______________________________________________
> > Openmoko community mailing list
> > community at lists.openmoko.org <mailto:community at lists.openmoko.org>
> > http://lists.openmoko.org/mailman/listinfo/community
> >
> >
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > Openmoko community mailing list
> > community at lists.openmoko.org
> > http://lists.openmoko.org/mailman/listinfo/community
>
> --
> exactt technology
> Dipl. Inf. (FH) Max Giesbert
>
> Schießstättstr. 16 T: +49 17 75 07 53 44
> D-80339 München F: +49 89 1 22 21 97 02
>
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/community/attachments/20081106/4bb5b77a/attachment.htm
More information about the community
mailing list