Debian size and uSD

Atilla Filiz atilla.filiz at gmail.com
Wed Oct 1 23:43:42 CEST 2008


A consistency check with fdisk yielded that the size of the partition and
the size of the filesystem do not match, and advised me to run e2fsck.
e2fsck said there are no problems. I ran fdisk and e2fsck on FR-debian.
gparted on my py sees the partition as 2GB. darn it.

On Wed, Oct 1, 2008 at 5:39 PM, Atilla Filiz <atilla.filiz at gmail.com> wrote:

> I did
> dd if=/dev/sdb2 of=/dev/sdf2
> and it booted but i still have a problem. sdb was a 512M card and sdf is
> 2G. After copying, my pc sees it as 2G but FR sees it as 512M. Runing some
> partition software now(testdisk).
>
>
> On Wed, Oct 1, 2008 at 4:09 PM, Nicola Mfb <nicola.mfb at gmail.com> wrote:
>
>> 2008/10/1 Atilla Filiz <atilla.filiz at gmail.com>
>>
>>> I can use two card readers, no problem. would you suggest me tar
>>> /dev/sdb2 and untar it into /dev/sdc2? Or is
>>> 'dd if=/dev/sdb of=/dev/sdc' better
>>>
>>
>> You may dd if=/dev/sdb2 of=/dev/sdc2, and after resize2fs /dev/sdc2.
>>
>>      Nicola
>>
>> _______________________________________________
>> Openmoko community mailing list
>> community at lists.openmoko.org
>> http://lists.openmoko.org/mailman/listinfo/community
>>
>>
>
>
> --
> ---------------------------------------------------------
> Bu mesaj UTF-8 ile kodlanmıştır
> ---------------------------------------------------------
> Atilla Filiz
> Technische Universiteit Eindhoven
> Embedded Systems, Master's Programme
> --------------------------------------------------------
>



-- 
---------------------------------------------------------
Bu mesaj UTF-8 ile kodlanmıştır
---------------------------------------------------------
Atilla Filiz
Technische Universiteit Eindhoven
Embedded Systems, Master's Programme
--------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/community/attachments/20081001/38177717/attachment.htm 


More information about the community mailing list