Openmoko to shift to 2.6.27 kernel ?

[Christ van Willegen]

Andy,

On Sat, Oct 11, 2008 at 2:29 PM, Andy Green <andy at openmoko.com> wrote:
> If you're interested to visit the "edge" and know how to DFU stuff
> around with NOR to get yourself in and out of trouble, you can get a
> "moredrivers" kernel here
>
> http://people.openmoko.org/andy/uImage-moredrivers-andy-tracking_2ffb4cc483642df1.bin

I dfu-util'led this into my 'kernel' partition, and also the qi image
into by u-boot.

After that, the red led started flashing. IIRC that means that there
is no kernel to boot. I then panicked and replaced the u-boot with the
one from OM20080917. That didn't help, so I also DFU'd the kernel from
OM20080917. That fixed my phone (I could boot again!), but I'm left
wondering what I did wrong...

AFAIK I can just do 'sudo dfu-util -D
uImage-moredrivers-andy-tracking_2ffb4cc483642df1.bin -a kernel -R' to
flash your kernel, but that may not be the case...

Christ van Willegen (who sometimes likes to be on the edge, and will
re-flash with QI again tonight...)


-- 
09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0