Problem with usb cable: device descriptor read/64, error -110

[sledgeas]

Hi everyone,

I am having the same problem as Kevin once had, now. I have immed 
reflashed my FR's om2007 with 2008 and kernel:
tried these:
from openmoko2008 update site:
Om2008.8-gta02-20080826.uImage.bin - this one says bad kernel image
these combinations work, (but the usb error is still there, error -110):
Om2008.8-gta02-20080831.rootfs.jffs2
testing-om-gta02-20080831.uImage.bin
testing-om-gta02-20080902.uImage.bin
gta02v5_and_up-u-boot.bin (Aug 26th)

Tried various ways (booting with/without usb cable, plugging it later 
etc.), re-inserting uhci_hcd etc.
cdc_ether and usbnet compiled as modules too. inserted (maually).

this comes up though only when i keep pressing power button in ASU (not 
too long thouth, of course :))
usb 6-1: new full speed USB device using uhci_hcd and address 21
usb 6-1: device descriptor read/64, error -110

though with the newest (today's) kernel it appears:
usb 6-1: device descriptor read/64, error -84

Thanks huge! Keep up the great work!

-- 
sledge

Kevin Zuber rašė:
> Hi Community,
>
> After a few days not using the usb cable and an opkg update and an
> system update (Ubuntu with Kernel 2.6.24-20), the cable doesn't work
> anymore.
>
> Dmesg says:
>
> [  211.983257] usb 1-1: new full speed USB device using uhci_hcd and
> address 2
> [  227.081309] usb 1-1: device descriptor read/64, error -110
> [  242.288201] usb 1-1: device descriptor read/64, error -110
> [  242.502543] usb 1-1: new full speed USB device using uhci_hcd and
> address 3
> [  257.600058] usb 1-1: device descriptor read/64, error -110
> [  272.800497] usb 1-1: device descriptor read/64, error -110
> [  273.016294] usb 1-1: new full speed USB device using uhci_hcd and
> address 4
>
> I double checked it with another computer with an older system (Ubuntu
> 7.10 and 8.04 without updates), but the same again.
>
> So it should be the cable (hardware defect?) oder the neo update (using
> 2007.2 with latest updates).
> Did I miss something, any other ideas? Has someone this problems, too?
>
> It also seems, that the neo isn't charging anymore when it is connected
> to the cable. The usb power supply is still working fine and can charge
> the neo.
>
> Thanks a lot for your answer!
>
> Kevin
>
>
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community
>
>