Echo issue on OM2008.08 potentially solved

[Timo Juhani Lindfors]

Florian Hackenberger <f.hackenberger at chello.at> writes:
> It should print something like '/dev/pts/2'. Now use 'minicom -s' and 
> set the device under 'serial device' to the value printed by dbus-send. 
> Wait for a response to the AT initiation sequence and then type in:
> AT%N0187
>
> The modem should respond with a message that AEC and Noise reduction is 
> now on.

Wouldn't

$ cli-framework
>>> gsm.DebugCommand("at%n0187\r\n")

be much easier solution than trying to use minicom?