using openocd

[Hypnotize]

Hi,

I cant get openocd working (with Debug Board v3 and GTA02), I just get this
error message:

$ openocd -f /etc/openocd/openocd.conf
Info:    openocd.c:84 main(): Open On-Chip Debugger (2007-01-31 12:00 CET)
Error:   ft2232.c:1351 ft2232_init(): unable to open ftdi device:
ftdi_usb_reset failed

Can anyone please help me?

messages from dmesg:

[  275.629104] usb 1-1.1: new full speed USB device using uhci_hcd and
address 9
[  275.684969] usb 1-1.1: configuration #1 chosen from 1 choice
[  275.692679] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter detected
[  275.692726] /build/buildd/linux-2.6.24/drivers/usb/serial/ftdi_sio.c:
Detected FT2232C
[  275.692879] usb 1-1.1: FTDI USB Serial Device converter now attached to
ttyUSB0
[  275.700444] ftdi_sio 1-1.1:1.1: FTDI USB Serial Device converter detected
[  275.700488] /build/buildd/linux-2.6.24/drivers/usb/serial/ftdi_sio.c:
Detected FT2232C
[  275.700613] usb 1-1.1: FTDI USB Serial Device converter now attached to
ttyUSB1
[  328.625095] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now
disconnected from ttyUSB0
[  328.625562] ftdi_sio 1-1.1:1.0: device disconnected
[  328.626567] usb 1-1.1: usbfs: interface 1 claimed by ftdi_sio while
'openocd' sets config #1
[  328.627572] usb 1-1.1: usbfs: USBDEVFS_CONTROL failed cmd openocd rqt 64
rq 0 len 0 ret -71

-Morten Freberg
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/community/attachments/20080907/7d8d5099/attachment.htm