problem accessing SD Card SanDisk SDSDQ-8192-E11M

[Nicolas LAURANCE]

Hi all,


I have problems accessing my 8Go SD Card

following different advices found in the wiki and the mailing list, I 
managed to change env in uboot

after boot :

root at om-gta02:~# cat /proc/cmdline
glamo_mci.sd_max_clk=10000000 rootfstype=jffs2 root=/dev/mtdblock6 
console=ttySAC2,115200 console=tty0 loglevel=8 regular_boot 
mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x0f6a0000(rootfs) 


but still :
root at om-gta02:~# fdisk /dev/mmcblk0
fdisk: cannot read from /dev/mmcblk0


this is quite erratic, as if I insist, that is if I enter the fdisk 
command several times, it eventually find the card and format it. I can 
then mount the partitions.

root at om-gta02:~# fdisk /dev/mmcblk0
fdisk: cannot read from /dev/mmcblk0
root at om-gta02:~# fdisk /dev/mmcblk0
fdisk: cannot read from /dev/mmcblk0
root at om-gta02:~# fdisk /dev/mmcblk0
fdisk: cannot read from /dev/mmcblk0
root at om-gta02:~# fdisk /dev/mmcblk0
fdisk: cannot read from /dev/mmcblk0
root at om-gta02:~# fdisk /dev/mmcblk0

The number of cylinders for this disk is set to 242560.
....

But after next boot, I drop into the same situation, can't find the card.

Any parameters suggestion ?

many thanks in advance
NiL
-------------- next part --------------
A non-text attachment was scrubbed...
Name: nlaurance.vcf
Type: text/x-vcard
Size: 330 bytes
Desc: not available
Url : http://lists.openmoko.org/pipermail/community/attachments/20080908/fbd7495f/attachment.vcf