Bad Magic Number while booting from SD card with new uImage!

[Joseph Reeves]

I also get a bad magic number:

http://n2.nabble.com/Debian-Install-failure%3A-Hash-Sum-Mismatch-tp733425p789209.html

Which is a shame...



2008/9/19 Shaz <shazalive at gmail.com>:
> Hi,
>
> I am getting bad magic number when I try to boot from micro SD with my
> new uImage. I had a clean and successful make and make uImage. I have
> an first partition on SD card of 100MB (vfat) and 899MB (ext3). I am
> using the moko toolchain as the later commands show. And got the
> sources from:
>
> --------------------
> git clone git://git.openmoko.org/git/kernel.git linux-2.6
> cd linux-2.6
> git checkout origin/stable
> --------------------
>
>
> After executing the following command:
> ------------------
>
> sudo make CROSS_COMPILE=/usr/local/openmoko/arm/bin/arm-angstrom-linux-gnueabi-
> ARCH=arm uImage
>
> ------------------
> I got the following output:
> ------------------
> .
> .
> .
>
> Image Name:   Linux-2.6.24
> Created:      Fri Sep 19 06:58:28 2008
> Image Type:   ARM Linux Kernel Image (uncompressed)
> Data Size:    1769300 Bytes = 1727.83 kB = 1.69 MB
> Load Address: 0x30008000
> Entry Point:  0x30008000
>  Image arch/arm/boot/uImage is ready
> -------------------
>
> What are the possible reasons for bad magic number and what is the solution?
>
> --
> Shaz
>
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community
>