ReMoKo and openSuSE 11

[Flyin_bbb8]

sorry for the third post, here's some hcidumps from both pc and freerunner
while havin remoko on

# hcidump (from pc)
HCI sniffer - Bluetooth packet analyzer ver 1.41
device: hci0 snap_len: 1028 filter: 0xffffffffffffffff
< HCI Command: Create Connection (0x01|0x0005) plen 13
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Connect Complete (0x03) plen 11
< ACL data: handle 11 flags 0x02 dlen 10
    L2CAP(s): Info req: type 2
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
> HCI Event: Command Status (0x0f) plen 4
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
> HCI Event: Read Remote Supported Features (0x0b) plen 11
> HCI Event: Command Complete (0x0e) plen 6
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
> HCI Event: Max Slots Change (0x1b) plen 3
> ACL data: handle 11 flags 0x02 dlen 10
    L2CAP(s): Info req: type 2
< ACL data: handle 11 flags 0x02 dlen 16
    L2CAP(s): Info rsp: type 2 result 0
      Extended feature mask 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Remote Name Req Complete (0x07) plen 255
> ACL data: handle 11 flags 0x02 dlen 16
    L2CAP(s): Info rsp: type 2 result 0
      Extended feature mask 0x0000
< ACL data: handle 11 flags 0x02 dlen 12
    L2CAP(s): Connect req: psm 1 scid 0x0040
> ACL data: handle 11 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0040 result 2 status 0
      Connection refused - PSM not supported
> HCI Event: Number of Completed Packets (0x13) plen 5
< HCI Command: Disconnect (0x01|0x0006) plen 3
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Disconn Complete (0x05) plen 4



hcidump (from freerunner)
HCI sniffer - Bluetooth packet analyzer ver 1.38
device: hci0 snap_len: 1028 filter: 0xffffffff
> HCI Event: Connect Request (0x04) plen 10
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Connect Complete (0x03) plen 11
< ACL data: handle 42 flags 0x02 dlen 10
    L2CAP(s): Info req: type 2
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
> HCI Event: Max Slots Change (0x1b) plen 3
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Command Status (0x0f) plen 4
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
> HCI Event: Command Complete (0x0e) plen 6
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
> ACL data: handle 42 flags 0x02 dlen 10
    L2CAP(s): Info req: type 2
< ACL data: handle 42 flags 0x02 dlen 16
    L2CAP(s): Info rsp: type 2 result 0
      Extended feature mask 0x0000
> HCI Event: Read Remote Supported Features (0x0b) plen 11
> ACL data: handle 42 flags 0x02 dlen 16
    L2CAP(s): Info rsp: type 2 result 0
      Extended feature mask 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 42 flags 0x02 dlen 12
    L2CAP(s): Connect req: psm 1 scid 0x0040
< ACL data: handle 42 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0000 scid 0x0040 result 2 status 0
      Connection refused - PSM not supported
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Disconn Complete (0x05) plen 4
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/community/attachments/20080928/9b7f4874/attachment.htm