[SHR-Testing] Enlightment SIGKILL'd

Philippe Lhardy philippelhardy at chez.com
Sat Apr 18 21:05:06 CEST 2009


Hi,

I try to install latest shr-testing image got at
http://build.shr-project.org/shr-testing/images/om-gta02/openmoko-shr-image-glibc-ipk--20090416-om-gta02.rootfs.tar.gz
i untar the content on a ext2 ( tested a ext3) too and boot with Qi on it,
this is on a usdcard on the 3rd partition ( 2nd is android that was booting
until i put noboot option ).
i put rootdelay=5 on /boot/append since it is on ucard
It just boot and start Xglamo but a white windows come up with enligthment
SIGKILL'd and i can retry many times it doesn't come up.
ssh & usbnet conenctivty is working and if i launch enlightment_strat by
hand it complains BUS_ERROR

root at om-gta02 ~ $ Xglamo&
root at om-gta02 ~ $ (II) verbosity set to 5
Using GLAMO 3362 card
(II) Screen: 16/16 depth/bpp
(II) vram size:4194304, onscreen vram size:614400, offscreen vram
size:3579904
(II) initialising offscreen pixmaps
Extended Input Devices not yet supported. Impelement it at line 647 in
kinput.c

root at om-gta02 ~ $
root at om-gta02 ~ $ enlightenment_start
E - PID=2209, do_precache=0
ESTART: 0.00041 [0.00041] - begin
ESTART: 0.01203 [0.01163] - signals done
ESTART: 0.02210 [0.01007] - determine prefix
e_prefix_determine()
DYNAMIC DETERMINED PREFIX: /usr
ESTART: 0.05705 [0.03495] - prefix done
ESTART: 0.06641 [0.00936] - eina init
ESTART: 0.11270 [0.04629] - intl init
ESTART: 0.12229 [0.00959] - parse args
ESTART: 0.13078 [0.00849] - arg parse done
ESTART: 0.13942 [0.00863] - ecore init
ESTART: 0.17632 [0.03690] - ecore_file init
ESTART: 0.18964 [0.01332] - more ecore
ESTART: 0.19760 [0.00796] - x connect
ESTART: 0.48743 [0.28983] - ecore_con
ESTART: 1.87269 [1.38526] - xinerama
E17 INIT: XINERAMA CHOSEN: [0], 480x640+0+0
ESTART: 1.89923 [0.02654] - x hints
ESTART: 1.91815 [0.01892] - x hints done
ESTART: 1.92139 [0.00325] - ecore_evas init
ESTART: 1.94193 [0.02054] - test done
ESTART: 1.95010 [0.00817] - efreet
ESTART: 1.97073 [0.02063] - efreet done
ESTART: 1.97889 [0.00816] - configure
ESTART: 1.98905 [0.01016] - dirs
ESTART: 2.00344 [0.01439] - filereg
ESTART: 2.01261 [0.00916] - config
**** BUS ERROR ****

What did i miss  ? Is that image correct ?
What is the correct image to have a working environment ?
Why does it mount root as ext4 ? ( with ext2 installation it complained
about circular references )

I am willing to help but in testing it seems there is no gdb what doesn't
help to debug things.

Please appologize if i polute the mailling list with usless remarks.

Regards
Philippe
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/community/attachments/20090418/769945ff/attachment.htm 


More information about the community mailing list