[FSO M5] Paroli-Apps crash with 'Screen' object has no attribute 'etk_obj
Mirko Lindner
mirko at openmoko.com
Wed Feb 11 13:26:36 CET 2009
Hi,
I am almost certain that that is not a paroli error.
See more comments below:
Arigead wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Ok now I've got Paroli up and running and removed the test stuff from
> the config file. I'll cut and paste the output to the terminal windown.
> I've basically selected Tele, the only app in the list and get the
> following output. I'll have a look at it later on. One thing is that
> later on the coverage display on the top does change to show my coverage
> but it's down as "No Service". Selecting "Tele" after the first time
> does nothing and produces no more output. Paroli seems to be a bit away
> from daily use in my case :-(
>
> John
>
> paroli-launcher.py 70 Launcher INFO adding - Tele to launcher
> paroli-launcher.py 108 Launcher INFO False
> paroli-launcher 284 root INFO starting mainloop
> gsm.py 181 GSM INFO Check antenna power
> gsm.py 183 GSM INFO antenna power is 0
> gsm.py 186 GSM INFO turn on antenna power
> gsm.py 173 GSM INFO register on the network
OK here we go ;)
> gsm.py 177 GSM ERROR Error :
> org.freesmartphone.GSM.Device.Timeout: device did not answer within 30
> seconds
> tasklet.py 121 tasklet ERROR Got error from unconnected tasklet :
> org.freesmartphone.GSM.Device.Timeout: device did not answer within 30
> seconds
This means paroli tried to connect to the framework but did not get an
answer to its register request.
Together with what you mentioned above :
"One thing is that later on the coverage display on the top does change
to show my coverage but it's down as "No Service"."
It seems as if the framework simply cannot conenct to the network. Could
you paste the framework.log as well?
Or even better open a ticket on
http://www.paroli-project.org/trac/
And paste both logs there.
/mirko
More information about the community
mailing list