[FSO] Any luck with bluetooth headsets?
Simon Kagstrom
simon.kagstrom at gmail.com
Sun Feb 22 20:48:40 CET 2009
On Sun, 22 Feb 2009 19:48:33 +0100
Simon Kagstrom <simon.kagstrom at gmail.com> wrote:
> Since the mic on the bluetooth headset works, I presume that the
> basic setup should be OK, but that the controls are somehow wrong.
> [...]
> Could the "Digital filters" block can be setup wrong and effectively
> mute outgoing sound?
One more datapoint: /sys/devices/platform/soc-audio/dapm_widget
contains the values below, and the difference compared to
gsmhandset.state is only these:
--- /tmp/standard Sun Feb 22 20:31:29 2009
+++ /tmp/bt Sun Feb 22 20:39:53 2009
@@ -1,9 +1,9 @@
Handset Spk: Off
Handset Mic: Off
Headset Mic: Off
-GSM Line In: Off
-GSM Line Out: Off
-Stereo Out: On
+GSM Line In: On
+GSM Line Out: On
+Stereo Out: Off
Mic 2 Volume: Off
Mic 1 Volume: Off
ALC Mixer: Off
which seems a bit *too* small to me. In particular, I'd like "Right
Capture Volume" and/or "Left Capture Volume" to be set to on instead.
From looking at the diagram, I think that would make sense at least. I
haven't figured out how to affect these still from looking in the state
file and in the driver though.
// Simon
Handset Spk: Off
Handset Mic: Off
Headset Mic: Off
GSM Line In: On
GSM Line Out: On
Stereo Out: Off
Mic 2 Volume: Off
Mic 1 Volume: Off
ALC Mixer: Off
Right Capture Volume: Off
Left Capture Volume: Off
Right ADC: Off
Left ADC: Off
Playback Mixer: Off
Out 4: Off
Out 3: Off
Out3 Left + Right: Off
Voice DAC: Off
Mono Out 2: Off
Mono Out 1: Off
Mono Mixer: Off
Right DAC: Off
Right Out 2: Off
Right Out 1: Off
Right Mixer: Off
Left DAC: Off
Left Out 2: Off
Left Out 1: Off
Left Mixer: Off
Mic Bias: Off
PM State: Standby
More information about the community
mailing list