[debian 2.6.28|29 xserver-xorg-video-glamo] wsod when xserver stops

[Christian Adams]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


Am 18.07.2009 um 15:22 schrieb Timo Jyrinki:

> 2009/7/18 Christian Adams <morlac at morlac.de>:
>>> Indeed. I've run the latest GIT from
>>> http://git.openmoko.org/?p=xf86-video-glamo.git;a=summary
>>
>> maybe a dumb question .. but could you give me some hints howto
>> actually build it?
>
> Not a dumb question. I'm using Debian, so I have all the compilation
> software directly on the phone, and also git. So, something like:
>
> apt-get install git-core build-essential gcc xserver-xorg-dev
> git clone git://git.openmoko.org/git/xf86-video-glamo
> cd xf86-video-glamo
>
> At this point you should run autotools, and I don't directly remember
> what I ran. Probably something like:
>
> aclocal
> libtoolize --automake
> automake --add-missing
> autoconf
>
> ...but I still had some problem so I simply ran autoreconf -vi also.
>
> then:
> ./configure
> make
>
> I installed the driver manually with:
>
> cp -a src/.libs/glamo_drv.so /usr/lib/xorg/modules/drivers/ 
> glamo_drv.so
>
> Hope this helps.
>
> -Timo

thanks a lot timo,
with these instructions it went flawlessly and playing with
my freerunner is a lot more fun again :)

cheers,
	christian (morlac) adams

p.s. @arne anka:
i'm not sure if i got that far if i didn't send my request to all
IMHO relevant m/l ..

- --
- -----BEGIN CONTACT BLOCK-----
   eMail:	morlac at morlac.de
   Jabber:	morlac at skavaer.homelinux.org
- ------END CONTACT BLOCK------

- -----BEGIN GEEK CODE BLOCK-----
Version: 3.1
GCS$/IT;d-;s:;a?;C++(+++)>++++;UL++++;P++(+++)>++++;
L++(+++);E---;W++;N(+);o?;K?;!w;!O;!M+>;!V;PS(+);PE;
Y+;PGP++;t+(++);5(+)>++;X(+);R*;tv->+;b++(+++);DI++;
D++(+++)>++++;G(+)>++;e+>+++;h-()>++;r++;y++;
- ------END GEEK CODE BLOCK------

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (Darwin)

iD8DBQFKYdmVr81gVylJyzERAiZiAKCijmR1crjFZkpQp1/IF8EFhs+z8QCeJVas
JxvycPzWGKmv/r/d8ZHrIJs=
=Jnbu
-----END PGP SIGNATURE-----