linphone 3.1.0

[Al Johnson]

On Wednesday 25 March 2009, Paul Fertser wrote:
> > Problems:
> > * I haven't got it to do sound yet - it seems unhappy with the alsa
> > device capabilities. I don't know if this is a configuration issue or a
> > fundamental problem.
>
> I guess you face the same issue with borked /etc/asound.conf as
> others. It has dmix as the default device, and dmix obviously doesn't
> support recording. Probably you can remove /etc/asound.conf altogether
> or try to mimic configuration of any desktop distro. Or just configure
> linphone to use hw:0,0 by default.
>
> Also, don't forget that a special voip.state should be loaded before
> trying to input/output sound. It uses DAI mode 10 and arecord -D
> hw:0,0 | aplay -D hw:0,0 is known to work.

I suspected as much, but couldn't confirm at the time. I had only given it a 
cursory check with the config that used to work for me with v1.6 and 2007.2. 
Now I can confirm it works using Brian Code's asound.conf and the voip-
handset.state that comes with milestone5. 

Brian's config is available at:
http://www.koolu.org/asound.conf