Solar charger (was Re: News Openmoko Shop Pulster)

[Daniel.Li]

On Mon, 2009-05-04 at 20:32 +0800, Daniel.Li wrote:
> On Sun, 2009-05-03 at 08:42 +0800, Daniel.Li wrote:
> > :) Humm... I think I'd better let them to make a bid for small
> > quantity. :D
> 

Sorry, I slipped. 

latest news from factory.

YL-S01: 26.47 USD
YL-S02: 20.59 USD
YL-S03: 10.00 USD


YL-S01
High solar energy of Single crystal silicon or polycrystalline silicon convert efficiency is over than 16%
Solar energy board：DC5.0V/300mA
Built-in rechargeable lithium polymer battery: 2400mAh/3.7V
Input Voltage:DC5.0V-5.5V
Input current: 800mA Max.
Output Voltage: 5.5V,8.4V 
Output current: 700mA Max.
Dimension: 138 mm×79mm×25 mm
Peak power supplied by photocell:1.5 W         
charging time: about 6hours (by computer)
               about 8-12hours(by sunlight)
Running time: about 2hours (discharging in 700mA)

YL-S02
High solar energy of Single crystal silicon or polycrystalline silicon convert efficiency is over than 16%
Solar energy board：DC5.0V/300mA
Built-in rechargeable lithium polymer battery：1800mAh/3.7V
Input Voltage：DC5.0V-5.5V
Input current: 800mA Max.
Output Voltage:DC5.5V±0.2V(unload)
Output current: 700mA Max.
Dimension：138 mm×79mm×25 mm
Peak power supplied by photocell:1.5 W 
charging time: about 4.5 hours (by computer)
                      about 6-10hours(by sunlight)
Running time: about1.6hours (discharging in 700mA)

YL-S03
High solar energy convert efficiency: over than 16% 
Solar energy board: 5.5V/80mA 
Dimension: 95×43×11.5mm 
High capacity build in battery: 1350mAH/3.7V \
Output voltage: DC 5.5±0.2V
Input voltage: DC 5.0-5.5V 
Output current: 700mA max
Input current: 800mA max 
Weight: about 55g 
charging time: about 3.5 hours (by computer)                       
               about 15-20hours(by sunlight)              
Running time: about 1.1hours (discharging in max.700mA)

> 
> 
-- 
Daniel.Li <lida_mail at 163.com>
PALFocus (http://palfocus.oicp.net)