Havint trouble to trying out om2009 on sD card

[Laszlo KREKACS]

On Wed, May 6, 2009 at 8:51 AM, David Reyes Samblas Martinez
<david at tuxbrain.com> wrote:
> try to add "rw" in the options of the append file,

root at om-gta02 /media/mmcblk0p2/boot $ cat append-GTA02
rw
loglevel = 8


root at om-gta02 /media/mmcblk0p2/boot $ exit

But no luck so far:
[   0.0000] Uknown boot option `g_ether.host_addr=00:1F:11:01:5D:38`: ignoring
[   0.0000] Uknown boot option `g_ether.dev_addr=00:1F:11:01:5D:38`: ignoring
[   0.0000] Uknown boot option `g_ether.host_addr=00:1F:11:01:5D:38`: ignoring
[   0.0000] Uknown boot option `g_ether.dev_addr=00:1F:11:01:5D:38`: ignoring

Please wait: booting...
[21474566.875000] regulator: Unable to get requested regulator: SD_3V3
[21474566.875000] s3c2440-sdi s3c2440: Regulator for SD_3V3 unavilable
{cursor blinking}

> btw no need of fat partition if you are using Qi

The wiki wasnt clear enough
(http://wiki.openmoko.org/wiki/Booting_from_SD), and wanted to
stay on the safe side.

If I partitions right now, i would simply create three ext2
partitions, as Qi can boot up to 3 partitions from SD
card.

Is there somewhere a ready-made .tar.gz for Qi, which I simply need to
unzip to an ext2 partition and no further editing?
Just to be sure, that Qi can boot, and works as expected. (so rule out
one source of problem)

Best regards,
 Laszlo