[neovento 5] applications!

[Tony Berth]

I changed that to 192.168.0.0 but still the same problem!

When I plug FR in, the console displays the following:

usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: config 2 interface 1 has no altsetting 0
usb 1-1: configuration #1 chosen from 2 choices
eth1: register 'cdc_ether' at usb-0000:00:1d.0-1, CDC Ethernet Device,
00:1f:11:01:53:86
usbcore: registered new driver cdc_ether

Thanks

Tony

On Wed, May 13, 2009 at 4:01 PM, neovento <schumi_8_2005 at gmx.de> wrote:

>
> "network 192.268.0.0" are you sure?
>
>
>
> Tony Berth wrote:
> >
> > something must have chabged regarding networking cause this problem is
> new
> > to me . Actually after flashing this new released images!
> >
> > I use a standard debian server (Linux 2.6.18-6-686 #1 SMP) and in my
> > /etc/network/interfaces I have following entries:
> >
> > allow-hotplug usb0
> > iface usb0 inet static
> > address 192.168.0.200
> > netmask 255.255.255.0
> > network 192.268.0.0
> > up iptables -A POSTROUTING -t nat -j MASQUERADE -s 192.168.0.0/24 &
> > up echo 1 > /proc/sys/net/ipv4/ip_forward &
> > up iptables -P FORWARD ACCEPT &
> > down iptables -D POSTROUTING -t nat -j MASQUERADE -s 192.168.0.0/24 &
> >
> > Thanks for your help
> >
> >
> > On Wed, May 13, 2009 at 3:44 PM, neovento <schumi_8_2005 at gmx.de> wrote:
> >
> >>
> >> usb works, really :D. Maybe it's a problem with the system on your PC. I
> >> had
> >> problems with Ubuntu's network manager.
> >>
> >> I understood your question, but I simple never have heard of those
> >> applications before.
> >> scrot is already installed, maybe that's similar to "screenshot".
> >> So you just have to try them. Generally said, everything you can install
> >> and
> >> use on the other distributions can also be used in neovento as it's
> >> simple
> >> debian.
> >> Sorry for being too lazy to answer your questions before :P
> >>
> >> regards
> >>
> >>
> >> Tony Berth wrote:
> >> >
> >> > I experince the problem I described by using following packages:
> >> >
> >> > http://opensvn.csie.org/fyp/releases/5/uImage.bin
> >> > http://opensvn.csie.org/fyp/releases/5/neovento5.3_GTA02.jffs2
> >> >
> >> > I know that I can install new applications but will they work with
> >> > neovento
> >> > 5? Sorry if my phrasing wasn't very clear about that subject.
> >> >
> >> > Thanks
> >> >
> >> > Tony
> >> >
> >> > On Wed, May 13, 2009 at 1:05 PM, neovento <schumi_8_2005 at gmx.de>
> wrote:
> >> >
> >> >>
> >> >> You should flash the right kernel.
> >> >>
> >> >> You can install applications.
> >> >>
> >> >>
> >> >> Tony Berth wrote:
> >> >> >
> >> >> > Trying the latest images and have following questions:
> >> >> >
> >> >> > Does usb0 networking work? 'ifconfig' on my debian server doesn't
> >> show
> >> >> any
> >> >> > usb0 interface any more!
> >> >> > Can I install Sketchbook, screenshot and Phonelog as well?
> >> >> >
> >> >> > Thanks
> >> >> >
> >> >>
> >> >>
> >> >
> >>
> >>
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/community/attachments/20090513/2988ab86/attachment.htm