[neovento 5 - SOLVED] applications!

Tony Berth tonyberth at googlemail.com
Wed May 13 18:18:12 CEST 2009


that did the trick. Indeed 'Uboot' boot solved the problem!

Thanks

Tony

On Wed, May 13, 2009 at 5:57 PM, neovento <schumi_8_2005 at gmx.de> wrote:

>
> Ok please try with Uboot.
> There were often problems with Qi and debian kernels.
>
>
> Tony Berth wrote:
> >
> > Qi
> >
> > On Wed, May 13, 2009 at 5:47 PM, neovento <schumi_8_2005 at gmx.de> wrote:
> >
> >>
> >> Do you use Qi or Uboot?
> >>
> >>
> >>
> >> Tony Berth wrote:
> >> >
> >> > get then the following:
> >> >
> >> > SIOCSIFNETMASK: No such device
> >> > SIOCSIFADDR: No such device
> >> > usb0: ERROR while getting interface flags: No such device
> >> >
> >> > Thanks
> >> >
> >> > Tony
> >> >
> >> > On Wed, May 13, 2009 at 4:35 PM, Joseph Reeves
> >> > <iknowjoseph at gmail.com>wrote:
> >> >
> >> >> try:
> >> >>
> >> >> ifconfig usb0 192.168.0.200/24
> >> >>
> >> >> Joseph
> >> >>
> >> >>
> >> >>
> >> >>
> >> >> 2009/5/13 Tony Berth <tonyberth at googlemail.com>:
> >> >> > when I type (as root!) 'ip addr add 192.168.0.200/24 dev usb0', I
> >> get:
> >> >> >
> >> >> > bash: ip: command not found
> >> >> >
> >> >> > Thanks
> >> >> >
> >> >> > Tony
> >> >> >
> >> >> > On Wed, May 13, 2009 at 4:24 PM, neovento <schumi_8_2005 at gmx.de>
> >> wrote:
> >> >> >>
> >> >> >> Ok, I do it like that:
> >> >> >>
> >> >> >> iptables -A POSTROUTING -t nat -j MASQUERADE -s 192.168.0.0/24
> >> >> >> sysctl -w net.ipv4.ip_forward=1
> >> >> >> ip addr add 192.168.0.200/24 dev usb0
> >> >> >> ifconfig usb0 up
> >> >> >> ssh root at 192.168.0.202
> >> >> >>
> >> >> >>
> >> >> >>
> >> >> >> Tony Berth wrote:
> >> >> >> >
> >> >> >> > I changed that to 192.168.0.0 but still the same problem!
> >> >> >> >
> >> >> >> > When I plug FR in, the console displays the following:
> >> >> >> >
> >> >> >> > usb 1-1: new full speed USB device using uhci_hcd and address 2
> >> >> >> > usb 1-1: config 2 interface 1 has no altsetting 0
> >> >> >> > usb 1-1: configuration #1 chosen from 2 choices
> >> >> >> > eth1: register 'cdc_ether' at usb-0000:00:1d.0-1, CDC Ethernet
> >> >> Device,
> >> >> >> > 00:1f:11:01:53:86
> >> >> >> > usbcore: registered new driver cdc_ether
> >> >> >> >
> >> >> >> > Thanks
> >> >> >> >
> >> >> >> >
> >> >> >>
> >> >> >> --
> >> >> >> View this message in context:
> >> >> >>
> >> >>
> >>
> http://n2.nabble.com/-neovento-5--applications%21-tp2881940p2884146.html
> >> >> >> Sent from the Openmoko Community mailing list archive at
> >> Nabble.com.
> >> >> >>
> >> >> >>
> >> >>
> >> >>
> >> >
> >>
> >>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/community/attachments/20090513/53074348/attachment.htm 


More information about the community mailing list