QtMoko - v11 - WiFi take 2

[tingox]

Hi,

On Thu, Sep 24, 2009 at 9:45 AM, Radek Polak <psonek2 at seznam.cz> wrote:

> Torfinn Ingolfsen wrote:
>
> > Another thought crossed my mind:
> > Is there a switch (software) that must be turned on to active the
> > radio of the WLAN on the FreeRunner?
>
> In QtMoko the switch is in "Devtools" menu [1] but is not needed. Wlan
> works out-of-the box (at least for me).
>

Ok, good to know.


> Btw are you really using latest QtMoko (=SHR) kernel?


Well, I copied QtMoko v11 (qtmoko-debian-v11.tar.gz) to my SD card (p2
partition. Uname says
neo:~# uname -a
Linux neo 2.6.29-rc3 #1 PREEMPT Tue Sep 1 23:03:59 CEST 2009 armv4tl
GNU/Linux

and this is a newer kernel than the one with QtMoko v9 at least.
/proccmdline says:
neo:~# cat /proc/cmdline
loglevel=4 console=tty0 console=ttySAC2,115200 init=/sbin/init ro
mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(qi),0x00040000(depr-ub-env),0x00800000(kernel),0x000a0000(depr),0x00040000(identity-ext2),0x0f6a0000(rootfs)
g_ether.host_addr=00:1F:11:01:0D:38 g_ether.dev_addr=00:1F:11:01:0D:38
root=/dev/mmcblk0p2 rootdelay=1 loglevel=1 quiet splash

I don't know of any other means to identify the QtMoko version I am using.
lsb_release isn't there:
neo:~# lsb_release -a
-bash: lsb_release: command not found

-- 
Regards,
Torfinn Ingolfsen
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/community/attachments/20090924/4c3c3e21/attachment-0001.htm