[GTA02] headphone socket issues

Davide Scaini dscaini at gmail.com
Wed Mar 24 10:31:21 CET 2010


On Wed, Mar 24, 2010 at 5:28 AM, Paul Wise <pabs3 at bonedaddy.net> wrote:

> On Wed, 2010-03-24 at 03:08 +0300, Paul Fertser wrote:
>
> > Hey, this looks very much like you used an ordinary 2.5<->3.5mm plug
> > converter which doesn't work due to wrong pinout. Just use correct
> > wiring for the converter (check the wiki), it should work out of the
> > box.
>
> I did use a plug converter in this case. Which wiki page can I find the
> correct converter wiring information on? I guess I'll need to butcher
> the current converter and rewire it?
>

yes!
here you are an example:
http://wiki.openmoko.org/wiki/Analog_wired_Headset_Nokia
but i'm sure there was something describing more in detail the neo cable
displacement.
d


>
> Earlier I used Nokia headphones with a 2.5mm plug and had the same
> one-bud sound issue. At that time I hadn't yet figured out the
> workaround of pulling it out a little bit, I'll test that later today.
>
> --
> bye,
> pabs
>
> http://bonedaddy.net/pabs3/
>
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/community/attachments/20100324/a9d3c057/attachment-0001.htm 


More information about the community mailing list