GSM Phone Simulation in Emulator

[saravanan T]

I have managed to get the phonesim app running, but the simulator always
shows registering.I am not able to simulate calls on the qemu emulator. 1.I
cannot simulate the sms or call feature using the phonesim. The phonesim gui
runs, but it does not shows me the at commands sent by the emulator. 2.How
can I simulate calls and at commands using the qemu emulator. 3. I have
tried things like a.connecting using libgsmd-tool b."lsof | /dev/ttySAC0" to
check whether the device works. but it does not show the ttySAC0 c.cu -l
/dev/ttySAC0 to the device.But it just says connected. d.powering on and off
the gsm modem using echo "0" >
>/sys/bus/platform/devices/neo1973-pm-gsm.0/power_on. no use(the modem does
not power up,checked using lsof|grep /dev/ttySAC0). The Images I use -
kernel_wildcard="uImage-2.6.24+git20080424-r0-om-gta01.bin"
rootfs_wildcard="Openmoko-scaredycat-openmoko-devel-image-glibc-ipk-P1-Snapshot-20080710-om-gta01.rootfs.jffs2"
uboot_wildcard="u-boot-gta01bv3-1.3.1+svnr4297+gitb29661fc1151077776454288051bc9a488351ce8-r3.bin"


I use pppd connection to terminal into emulator.

Regards
Saravanan.L
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/community/attachments/20100508/d7cc13a7/attachment.htm