GSM Phone Simulation

[saravanadeve]

I have managed to get the phonesim app running, but the simulator always
shows registering.I am not able to simulate calls on the qemu emulator.

1.I cannot simulate the sms or call feature using the phonesim. The phonesim
gui runs, but it does not 
shows me the at commands sent by the emulator.

2.How can I simulate calls and at commands using the qemu emulator.

3. I have tried things like
a.connecting using  libgsmd-tool
b."lsof | /dev/ttySAC0" to check whether the device works. but it does not
show the ttySAC0
c.cu -l /dev/ttySAC0 to the device.But it just says connected.
d.powering on and off the gsm modem using echo "0" > 
>/sys/bus/platform/devices/neo1973-pm-gsm.0/power_on. no use.

The Images I use - 

kernel_wildcard="uImage-2.6.24+git20080424-r0-om-gta01.bin"
rootfs_wildcard="Openmoko-scaredycat-openmoko-devel-image-glibc-ipk-P1-Snapshot-20080710-om-gta01.rootfs.jffs2"
uboot_wildcard="u-boot-gta01bv3-1.3.1+svnr4297+gitb29661fc1151077776454288051bc9a488351ce8-r3.bin"


-- 
View this message in context: http://openmoko-public-mailinglists.1958.n2.nabble.com/GSM-Phone-Simulation-tp5010225p5019944.html
Sent from the Openmoko Community mailing list archive at Nabble.com.