GSM Firmware Flashed, now UBIFS problem and Kernel Panic

[Thomas Franck]

Hi..

Please advice if you can.. Stupidly I didn't make any backup prior to
this.. (well, nothing recent anyways)

my QtMoko is on NAND and I just used the µSD Flashing Method as
recommended in the Wiki to update my GSM Firmware from Moko10 to Moko11..

It finshed with D_O_N_E and showed the green Angstrom login, then I
removed the battery and flash SD.. put my SIM and storage SD back in and
was going to boot into QtMoko again, but I get:

---8<----------------8<-------------
UBIFS error (pid 1): ubifs_read_node: bad node type (255 but expected 6)
UBIFS error (pid 1): ubifs_Read_node: bad node at LEB 0:0
Kernel panic - not syncing: VFS: Unable to mount fs on unknown-block(0,0)
---8<----------------8<-------------

I think the flashing just messes with the GSM chip, so despite the
subject of the mail, I believe it might be something to do with what
happened before the flashing:

I shut down Qt, took my SIM an SD out.. powered up - but forgot to press
AUX.. so I removed the battery when I saw the first text line from
normal boot (I guess it's a Kernel loading message or so).. then I
plugged in again and carried on with AUX and flashed..

Any ideas on this problem? I there any way to repair that FS?

Cheers,
-- 
Thomas

-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~
A distributed system is one in which the failure of a computer you
didn't even know existed can render your own computer unusable.
  - Leslie Lamport
-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~