x11vnc and QTMoko

[Philip Rhoades]

Thomas,

Radek set me up with access and I have put the files here:

	http://qtmoko.sourceforge.net/download/x11vnc/

- sorry about the delay!

BTW, I put a README.txt file there too but that is not displaying for 
some reason but shell script should give you enough info . .

Regards,

Phil.


On 2011-04-03 20:12, Thomas Bellembois wrote:
> It would be great !
> May be Radek could put it on the QTMoko site ?
>
> Le 03/04/2011 12:07, Philip Rhoades a écrit :
>> Ranjit,
>>
>> Keyboard access was what I paid Karl to do . . it is pretty basic with
>> a minor glitch . . but it works . .
>>
>> If someone can tell me an appropriate place to put it for general
>> access, I will do that . .
>>
>> Phil.
>>
>>
>> On 2011-04-03 18:04, Ranjit Pillai wrote:
>>> Hi,
>>>
>>> If you want to use x11vnc with qtmoko, remember that qtmoko runs on
>>> framebuffer and not x11. I tried it with QX but couldn't make it work,
>>> but with a simple cmd at the shell prompt
>>> x11vnc -rawfb console ----> (device)
>>> and
>>> vncviewer<ip-address of server> -----> client(laptop) was able to
>>> connect to the x11vnc, but don't expect the keyboard access or
>>> anything of that sort.. :)
>>> just recorded a sample video with it ... its with v24
>>> http://www.youtube.com/watch?v=8N76Kfc9HmQ
>>>
>>> Rgds
>>> Rp
>>>
>>> On 4/2/11, Philip Rhoades<phil at pricom.com.au> wrote:
>>>> Thomas,
>>>>
>>>> I paid Karl to do a bit of work on it so what I have is probably a bit
>>>> different from what you have. Maybe I should put it and my startup
>>>> script on the OM web site somewhere?
>>>>
>>>> Regards,
>>>>
>>>> Phil.
>>>>
>>>>
>>>> On 2011-04-02 04:10, Thomas Bellembois wrote:
>>>>> Thanks for this quick reply !
>>>>>
>>>>> I could not manage to make it work.
>>>>> I have apt-get installed it, configured xinetd to run it a startup
>>>>> but I
>>>>> can not connect with my vnc client.
>>>>>
>>>>> Could you give me your method ?
>>>>>
>>>>> Thanks a lot.
>>>>>
>>>>> Thomas
>>>>>
>>>>> Le 01/04/2011 17:40, Philip Rhoades a écrit :
>>>>>> Thomas,
>>>>>>
>>>>>> Yep - using it constantly so I can get full keyboard access for
>>>>>> typing
>>>>>> texts . .
>>>>>>
>>>>>> Karl was very helpful getting the glitches sorted out - I have one
>>>>>> trivial problem that I can't work out but Karl is quite busy at the
>>>>>> moment.
>>>>>>
>>>>>> Regards,
>>>>>>
>>>>>> Phil.
>>>>>>
>>>>>>
>>>>>> On 2011-04-02 00:59, Thomas Bellembois wrote:
>>>>>>> Hello All !
>>>>>>>
>>>>>>> I was wondering if somebody has already tried to use x11vnc on
>>>>>>> QTMoko ?
>>>>>>> (http://www.karlrunge.com/x11vnc/)
>>>>>>>
>>>>>>> Thanks,
>>>>>>>
>>>>>>> Thomas
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Openmoko community mailing list
>>>>>>> community at lists.openmoko.org
>>>>>>> http://lists.openmoko.org/mailman/listinfo/community
>>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Openmoko community mailing list
>>>>> community at lists.openmoko.org
>>>>> http://lists.openmoko.org/mailman/listinfo/community
>>>>
>>>> --
>>>> Philip Rhoades
>>>>
>>>> GPO Box 3411
>>>> Sydney NSW 2001
>>>> Australia
>>>> E-mail: phil at pricom.com.au
>>>>
>>>> _______________________________________________
>>>> Openmoko community mailing list
>>>> community at lists.openmoko.org
>>>> http://lists.openmoko.org/mailman/listinfo/community
>>>>
>>>
>>>
>>
>
>
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community

-- 
Philip Rhoades

GPO Box 3411
Sydney NSW	2001
Australia
E-mail:  phil at pricom.com.au