Freerunner won't charge
clemens at 1541.org
Mon Jul 4 21:04:45 CEST 2011
I have the same problem. Can you pls report if replacing the chip actually
fixes the moko?
On Sat, Jul 2, 2011 at 06:46, Paul Fertser <fercerpav at gmail.com> wrote:
> Ronald Tallent <ron at tallent.ws> writes:
> > So, there's no way to fix this thing? If I need to take it to an
> > electronics repair shop to get it fixed I can, just need to know what
> > part(s) will need to be repaired/replaced. Anyone know were I can get
> > hold of schematics for the mainboard? If it's a simple repair proceedure
> > I might be able to do it myself even.
> Schematics are available from . I hope you'll find the cause and
> will be able to use your cool device again :)
> Basically, what you need to know is that charging is controlled by the
> PMU chip, PCF50633, it's connected over SPI bus and you can easily
> view dump of its registers from  (newer kernels might have a
> slightly different path but the same filename). Schematics are pretty
> much obvious but if you have any questions, feel free to ask here or
> on #openmoko-cdevel irc channel.
>  http://people.openmoko.org/joerg/schematics/
>  /sys/class/i2c-adapter/i2c-0/0-0073/dump_regs
> Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
> mailto:fercerpav at gmail.com
> Openmoko community mailing list
> community at lists.openmoko.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the community