question about installing android on FR

[a dehqan]

Hello.

On Sun, 2012-01-22 at 01:13, a dehqan wrote:
>    In The Name Of Allah
>    Hello
>    Thanks have tried:
>
 mtdparts=mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x04000000(system),0x0b6a0000(userdata)
>
>    Now printenv shows:
>
>
 mtdparts=mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x04000000(system),0x0b6a0000(userdata)
>
>    but when want to try dfu-utils -l shows:
>    Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=1,
name="u-boot"
>    Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=2,
>    name="u-boot_env"
>    Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=3,
name="kernel"
>    Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=4,
name="splash"Hello.

On Sun, 2012-01-22 at 01:13, a dehqan wrote:
>    In The Name Of Allah
>    Hello
>    Thanks have tried:
>
 mtdparts=mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x04000000(system),0x0b6a0000(userdata)
>
>    Now printenv shows:
>
>
 mtdparts=mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x04000000(system),0x0b6a0000(userdata)
>
>    but when want to try dfu-utils -l shows:
>    Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=1,
name="u-boot"
>    Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=2,
>    name="u-boot_env"
>    Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=3,
name="kernel"
>    Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=4,
name="splash"
>    Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=5,
name="factory"
>    Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=6,
name="system"
>
>    again there is no userdata
>    Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=5,
name="factory"
>    Found DFU: [0x1d50:0x5119] devnum=61, cfg=0, intf=0, alt=6,
name="system"
>
>    again there is no userdata
On Mon, Jan 23, 2012 at 8:13 PM, Martin Jansa <martin.jansa at gmail.com>wrote:

> On Mon, Jan 23, 2012 at 08:07:15PM +0330, a dehqan wrote:
> > In The Name Of Allah
> > Hello
> >
> > This is answer of stefan schimdt (dfu-utils developer) :
> >
> > "The number of shown partitions is hardcoded atm to DFU_NUM_ALTERNATES
> > which is set to 6. So you last partition does not get shown increment
> > it to seven in your board config and re-compile your u-boot and test
> > again."
>
> Why not sqash factory+system partitions together as someone suggested in
> this thread?
>
> Here:
>
> > >> setenv
> > >>
> mtdpartsmtdparts=physmap-flash:-(nor)\;neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x04040000(factory_system),0x0b6a0000(userdata)
> > >>
>
>
> Cheers,
>
> --
> Martin 'JaMa' Jansa     jabber: Martin.Jansa at gmail.com
>
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.openmoko.org/pipermail/community/attachments/20120124/569c4350/attachment.htm>