qtmoko v45
Marc Langlois
langlois.marc at gmail.com
Mon Jul 2 21:57:28 CEST 2012
Hi,
After execution of Neil Brown's howto for GPRS on the GTA04, I would
conclude as:
+> For the connection to /dev/ttyHS3, I use minicom with the default
settings but the connection does not work consistently.
+> AT+CFUN = 3D1 (set phone functions on), and AT_OWANCALL=3D1,1,1
returns me "ERROR".
Here is my log:
AT+COPS
OK
AT+COPS?
+ COPS: 0,0, "004f00720061006e0067006500200046", 0
OK
AT_OWANCALL = 3D1,1,1
ERROR
AT_OWANDATA?
OK
What are the tips for the connection débuger?
Can you used the modem mode multiplexing (neocontrol) with a GTA04A4?
The UMTS signal reception is good in my house.
Best regards,
Marc
>>Neil Jerram <neil at ossau.homelinux.net> writes:
>> Marc Langlois <langlois.marc at gmail.com> writes:
>>
>>> Neil,
>>>
>>> My phone is GTA04A4.
>>
>> Ah, thanks. Has GPRS actually been integrated yet in QtMoko on the
>> GTA04? I'm not sure that it has.
>
>For ease of reference, here's Neil Brown's howto for GPRS on the GTA04
>(and which it's well worth creating another copy of):
>
>> 0/ connect to /dev/ttyHS3 (others might work)
>> 1/ make sure you are registered with network.
>> e.g.
>> AT+CFUN=3D1
>> AT+COPS
>> AT+COPS?
>>
>> 2/ establish data connection
>> AT_OWANCALL=3D1,1,1
>>
>> 3/ collect status
>>
>> AT_OWANDATA?
>> My response was
>> _OWANDATA: 1, 49.179.102.244, 0.0.0.0, 211.29.132.12, 61.88.88.88, 0.0.0=
>> .0, 0.0.0.0,144000
>> ^IP address ^ ^DNS-1------^ ^DNS-2----^
>>
>> 4/ configure network
>>
>> ifconfig hso0 49.179.102.244 up
>> route add default dev hso0
>>
>> echo nameserver 211.29.132.12 > /etc/resolv.conf
>> echo nameserver 61.88.88.88 >> /etc/resolv.conf
>>
>>
>>
>>
>> And you should be set to go. If you want tethering via USB then add:
>> on GTA04:
>> echo 1 > /proc/sys/net/ipv4/ip_forward=20
>> iptables -t nat -A POSTROUTING -s 192.168.0.200 -j MASQUERADE
>>
>> (here 192.168.0.200 is the IP of my notebook on the USB interface.)
>>
>> on notebook/desktop/whatever
>>
>> route add default gw 192.168.0.202
>> echo nameserver 211.29.132.12 > /etc/resolv.conf
>> echo nameserver 61.88.88.88 >> /etc/resolv.conf
>>
>> (192.168.0.202 is IP of GTA04 of USB link).
>>
>> To terminate data call
>>
>> AT_OWANDATA=3D1,0,1
>>
>>
>> You don't need pppd at all.
>
>But there are no occurrences of "OWAN" in the qtmoko codebase - so I'm
>pretty sure it hasn't been integrated yet.
>
> Neil
More information about the community
mailing list