[gta02] cannot boot from NAND

Ben Wong lists.openmoko.org at wongs.net
Fri Dec 13 02:59:01 CET 2013

Hey Joif,

You're not alone. I get the same message with v58 in NAND; haven't
tried on SD yet.

I thought it might be DFU transferring the file system incorrectly,
but seeing that you have the same problem, I think perhaps the image
on sourceforge is corrupted.

What's the checksum supposed to be for the QTMoko files?


On Thu, Dec 12, 2013 at 1:31 PM, Francesco De Vita
<francesco.devita at mailoo.org> wrote:
> Hello
> Flashing QtMoko v58 I discovered that I'm not able to boot any more
> from NAND. This is what I receive after pressing the power button:
> UBI error: process_eb: bad image sequence number 1588845893 in PEB 1971,
> epxected 1933142073
> slab error in kmem_cache_destroy(): cache `ubi_scan_slab': Can't free
> all objects
> UBI error: ubi_init: cannot attach mtd6
> Kernel panic - not syncing: VFS: Unable to mount root fs on
> unknown-block(0,0)
> [<c002b0f0>] (unwind_backtrace+0x0/0xf0) from [<c02aba94>]
> (panic+0x58/0x174)
> [<c02aba94>] (panic+0x58/0x174) from [<c0008cc0>]
> (mount_block_root+0x1d4/0x294)
> [<c0008cc0>] (mount_block_root+0x1d4/0x294) from [<c0008f6c>]
> (prepare_namespace+0x8c/0x1c8)
> [<c0008f6c>] (prepare_namespace+0x8c/0x1c8) from [<c00089b4>]
> (kernel_init+0xfc/0x130)
> [<c00089b4>] (kernel_init+0xfc/0x130) from [<c0027730>]
> (kernel_thread_exit+0x0/0x8)
> With v55 it seems to boot correctly but the process stops after the
> first configuration, and rebooting gives just a black screen.
> With v56 I have similar errors like above.
> Any hints on what's going on? I'm so sad...
> Joif
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community

More information about the community mailing list