qtmoko videoplayer

[robin]

if I run via ssh -X everything is fine (the output is pasted below)
if I run via qmplayer I get only the sound but no video (instead about
a quarter of the background image is displayed).

here is the output from the
ssh -X 

is there a way I can get the output from qmplayer?


root at neo:~# /opt/qtmoko/qpe.env 
root at neo:~# mplayer /media/card/Ch2_TaijiBailongBall_DVD2010_h264_mp3.mkv 
MPlayer svn r34540 (Debian), built with gcc-4.6 (C) 2000-2012 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.

Playing /media/card/Ch2_TaijiBailongBall_DVD2010_h264_mp3.mkv.
libavformat version 53.21.1 (external)
Mismatching header version 53.19.0
libavformat file format detected.
[matroska,webm @ 0x40c4c558]Estimating duration from bitrate, this may be
inaccurate
[lavf] stream 0: video (h264), -vid 0
[lavf] stream 1: audio (mp3), -aid 0
VIDEO:  [H264]  320x240  0bpp  29.970 fps    0.0 kbps ( 0.0 kbyte/s)
Load subtitles in /media/card/
vo: couldn't open the X11 display ()!
vo: couldn't open the X11 display ()!
vo: couldn't open the X11 display ()!
VO XOverlay need a subdriver
[VO_SDL] SDL initialization failed: Unable to open mouse.
vo: couldn't open the X11 display ()!
vo: couldn't open the X11 display ()!
vo: couldn't open the X11 display ()!
notice: Can't open /dev/tty: No such device or address
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
libavcodec version 53.35.0 (external)
Mismatching header version 53.32.2
Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264)
==========================================================================
==========================================================================
Requested audio codec family [mpg123] (afm=mpg123) not available.
Enable it at compilation.
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 48000 Hz, 1 ch, floatle, 128.0 kbit/8.33% (ratio: 16000->192000)
Selected audio codec: [ffmp3float] afm: ffmpeg (FFmpeg MPEG layer-3 audio)
==========================================================================
AO: [pulse] Init failed: Connection refused
Failed to initialize audio driver 'pulse'
AO: [alsa] 48000Hz 1ch floatle (4 bytes per sample)
Starting playback...
Unsupported PixelFormat 61
Unsupported PixelFormat 53
Unsupported PixelFormat 81
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
Movie-Aspect is 1.33:1 - prescaling to correct movie aspect.
[swscaler @ 0x40b6b978]No accelerated colorspace conversion found from
yuv420p to rgb565le.
[swscaler @ 0x40b6b978]using unscaled yuv420p -> rgb565le special converter
VO: [fbdev] 320x240 => 320x240 BGR 16-bit 
A:   3.7 V:   1.7 A-V:  2.040 ct:  0.033   0/  0 54% 87% 88.2% 50 0 


           ************************************************
           **** Your system is too SLOW to play this!  ****
           ************************************************

Possible reasons, problems, workarounds:
- Most common: broken/buggy _audio_ driver
  - Try -ao sdl or use the OSS emulation of ALSA.
  - Experiment with different values for -autosync, 30 is a good start.
- Slow video output
  - Try a different -vo driver (-vo help for a list) or try -framedrop!
- Slow CPU
  - Don't try to play a big DVD/DivX on a slow CPU! Try some of the lavdopts,
    e.g. -vfm ffmpeg -lavdopts lowres=1:fast:skiploopfilter=all.
- Broken file
  - Try various combinations of -nobps -ni -forceidx -mc 0.
- Slow media (NFS/SMB mounts, DVD, VCD etc)
  - Try -cache 8192.
- Are you using -cache to play a non-interleaved AVI file?
  - Try -nocache.
Read DOCS/HTML/en/video.html for tuning/speedup tips.
If none of this helps you, read DOCS/HTML/en/bugreports.html.