GTA04A5 ready to be pre-ordered
mparchet at sunrise.ch
Sat Nov 9 11:20:26 CET 2013
GTA04A5 has 4g (LTE) so I'm interests for an openphonux with GTA04A5..
Id or possible in the future ?
Could you inform me when it's available and what's the price ?
> Le 8 nov. 2013 à 23:20, "Dr. H. Nikolaus Schaller" <hns at goldelico.com> a écrit :
>> Am 08.11.2013 um 23:08 schrieb Michael Parchet:
>> Sorry I found only GTA04A4 but not GTA04A5 with LTE for pre order and price.
> If you look at the date (22 janvier 2013), a long time has passed. We did start for preorders
> back then, but there wasn't enough response. So it was put on hold some weeks later.
> In the meantime the list cited below is still almost correct, but not everything.
> Now, we are *thinking* about restarting the project with *maybe* LTE (option).
> Restarting means to think about all details - and decide if it is now a better time to
> do it. You know world economy has changed, attitudes for openness, freerom have
> changed and people are no longer following that much the top 2 brands.
> I.e. please wait for a new announcement.
>> Thanks for your answer
>> Best regards
>> Le mardi 22 janvier 2013, Dr. H. Nikolaus Schaller a écrit :
>>> Hi all,
>>> finally, the GTA04A5 batch is ready for production and we are open for pre-orders through
>>> What will be different to GTA04A4?
>>> * the GPS receiver can provide a 1 second impulse interrupt to the CPU
>>> * the infrared receiver can be independently powered off (it was alternatively powered with RS232 before)
>>> * some sensors have been upgraded to non-obsolete versions (e.g. BMA180 is out of production)
>>> * WLAN/BT power controlled through a GPIO (so that VAUX4 is now free for other use)
>>> * 6-pin ZIF connector for external keyboard or other I2C devices
>>> * it is possible to use a new earpiece (from Knowles) so that we finally can offer a complete case kit
>>> * the GPS antenna switch has been redesigned
>>> * improved headset detection hardware
>>> * CPU will be always 1 GHz and Memory 512MB RAM / 1GB NAND
>>> * UMTS module may have newer firmware inside (tbc.)
>>> * there is a plan for a 3D printed case (approx. 50 EUR) with integrated touch pen
>>> * there will be 3D data (STEP) of the PCB and components so that you can design your own case that fits with a micrometer precision :)
>>> Preliminary (there may still come minor changes coming from PCB
>>> Layout tuning and from first production feedback) schematics can be found here:
>>> -- hns
>>> Openmoko community mailing list
>>> community at lists.openmoko.org
>> Openmoko community mailing list
>> community at lists.openmoko.org
> Openmoko community mailing list
> community at lists.openmoko.org
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the community